sibisi666
|
|
July 24, 2014, 10:40:31 PM |
|
Hello, i ordered 13x S3, but i have same problem ... Unpaid Unshipped Expired
after how long time u got changed status to paid.?
It took my two orders about an hour. If they've not cleared in 24-hours, email BM with your order number and TXID of the payment--they will manual update your order from there. thanx man, i will do that
|
|
|
|
sibisi666
|
|
July 24, 2014, 10:50:47 PM |
|
its paid and verified, it's took more than 2hours to complete payment, to status paid.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4214
Merit: 8299
'The right to privacy matters'
|
|
July 24, 2014, 10:53:14 PM |
|
Can anyone tell me the fan sizes on the S3, are they 120's or 140's..??
120's they are the same as the s-1 as far as I can tell. with the 2 and the black shroud the unit is cooler . So they spin around 1600 to 2000 loud but not crazy loud.
|
|
|
|
Stinky_Pete
|
|
July 24, 2014, 11:00:39 PM |
|
Hi, does anyone know what this means?
Is one of the chips dead? What can I do about it?
Frequency 218.75
oooooooo oooooooo oooooooo ooooooo-
Lots of suggestions all through this thread, since people began receiving their miners. No simple solution but to try them all.
|
|
|
|
Stinky_Pete
|
|
July 24, 2014, 11:01:31 PM |
|
its paid and verified, it's took more than 2hours to complete payment, to status paid.
Relatively quick
|
|
|
|
Xian01
Legendary
Offline
Activity: 1652
Merit: 1067
Christian Antkow
|
|
July 24, 2014, 11:06:25 PM |
|
Nice to see Batch 4 sell out so quickly Picked up another 6 in Batch 5
|
|
|
|
squashpile
|
|
July 24, 2014, 11:13:46 PM |
|
About the asic status - I have one S1 that will always show one board dead after power off and back on. I'm not kidding I have to reboot it like 20-30 times and it always goes back to all zeros. Once it is all zeros it is totally fine unless it gets powered off again. So try reboots. Power cycles on this one s1 just throw it back into all X status. I have to reboot.
|
SquashPool - 0% Fee - Dedicated P2Pool VPS - Atlanta, GA - SSD - Gig uplink
|
|
|
jpchrist
Full Member
Offline
Activity: 174
Merit: 100
16Q3R8NAfK63DvkTUGgLdPScyMU8uSAJUH
|
|
July 24, 2014, 11:14:13 PM |
|
Nice to see Batch 4 sell out so quickly Picked up another 6 in Batch 5 Wow, cant believe the batch 5 price is only 0.01 lower than batch 4. An S3 should make ~0.09 during that time. Each batch is a worse deal...
|
|
|
|
Xian01
Legendary
Offline
Activity: 1652
Merit: 1067
Christian Antkow
|
|
July 24, 2014, 11:18:16 PM |
|
Each batch is a worse deal...
You are welcome to deal with Hashfast, Cointerra... or Butterfly Labs...
|
|
|
|
aurel57
Legendary
Offline
Activity: 1204
Merit: 1000
|
|
July 24, 2014, 11:18:54 PM |
|
Nice to see Batch 4 sell out so quickly Picked up another 6 in Batch 5 Wow, cant believe the batch 5 price is only 0.01 lower than batch 4. An S3 should make ~0.09 during that time. Each batch is a worse deal... as long as the batches keep selling this fast the price will not drop much.
|
|
|
|
jpchrist
Full Member
Offline
Activity: 174
Merit: 100
16Q3R8NAfK63DvkTUGgLdPScyMU8uSAJUH
|
|
July 24, 2014, 11:19:26 PM |
|
Each batch is a worse deal...
You are welcome to deal with Hashfast, Cointerra... or Butterfly Labs... Haha, somebody is a little sensitive.
|
|
|
|
rograz
|
|
July 24, 2014, 11:20:48 PM |
|
Is it just me or does the units that actually handle OC seem to be very good units, the 2 I've found so far takes 250Mhz without breaking a sweat Oo
|
|
|
|
jpchrist
Full Member
Offline
Activity: 174
Merit: 100
16Q3R8NAfK63DvkTUGgLdPScyMU8uSAJUH
|
|
July 24, 2014, 11:21:03 PM |
|
Nice to see Batch 4 sell out so quickly Picked up another 6 in Batch 5 Wow, cant believe the batch 5 price is only 0.01 lower than batch 4. An S3 should make ~0.09 during that time. Each batch is a worse deal... as long as the batches keep selling this fast the price will not drop to fast. Seems that Bitmain realizes batch 1 (@ ~0.7 btc each) were way underpriced if they can get 0.65 btc a month later.
|
|
|
|
Xian01
Legendary
Offline
Activity: 1652
Merit: 1067
Christian Antkow
|
|
July 24, 2014, 11:22:29 PM |
|
Haha, somebody is a little sensitive.
Not at all. Merely hoping to inject some levity and perspective. Who might you suggest I patronize to receive ~2.6TH/s shipping out August 7th for cheaper than 3.39 BTC @ < 1W/GHs?
|
|
|
|
faetos
|
|
July 24, 2014, 11:22:47 PM |
|
Is it just me or does the units that actually handle OC seem be very good units, the 2 I've found so far takes 250Mhz without breaking a sweat Oo
How long have you had them at 250? Any increase in hw errors?
|
|
|
|
nottm28
|
|
July 24, 2014, 11:27:04 PM |
|
Haha, somebody is a little sensitive.
Not at all. Merely hoping to inject some levity and perspective. Who might you suggest I patronize to receive ~2.6TH/s shipping out August 7th for cheaper than 3.39 BTC @ < 1W/GHs? The pain of bfl never goes away - can't believe they are still in business...
|
donations not accepted
|
|
|
rograz
|
|
July 24, 2014, 11:31:53 PM |
|
Is it just me or does the units that actually handle OC seem be very good units, the 2 I've found so far takes 250Mhz without breaking a sweat Oo
How long have you had them at 250? Any increase in hw errors? HW errors barely seem to move, seems discarded is the thing to look out for when OCing more than HWs, or chips shutting down as usual. I'll update if I remember it when I'm done going trough all units and had them running for longer.
|
|
|
|
bitslo
Newbie
Offline
Activity: 12
Merit: 0
|
|
July 24, 2014, 11:38:23 PM |
|
B3 price 0.725 -7,7% = 0,67B B4 price is 0,65 B5 price is 0,64 I still waiting my 6 x B2 Chek Lap Kok, Hong Kong 07/24/2014 6:30 P.M. We've missed the scheduled transfer time. This may cause a delay. Shenzhen, China 07/24/2014 11:50 A.M. Departure Scan 07/24/2014 1:20 A.M. Arrival Scan 07/24/2014 1:00 A.M. Departure Scan Shenzhen, China 07/23/2014 1:37 A.M. Warehouse Scan Shenzhen, China 07/22/2014 1:54 A.M. Your package may be delayed. We are adjusting delivery plans as quickly as possible. Shenzhen, China 07/21/2014 8:42 P.M. Pickup Scan China 07/20/2014 4:06 A.M. Order Processed: Ready for UPS UPS - UPS Sorry
|
|
|
|
Ilan1
|
|
July 24, 2014, 11:44:48 PM |
|
About the asic status - I have one S1 that will always show one board dead after power off and back on. I'm not kidding I have to reboot it like 20-30 times and it always goes back to all zeros. Once it is all zeros it is totally fine unless it gets powered off again. So try reboots. Power cycles on this one s1 just throw it back into all X status. I have to reboot.
Thanks I tried rebooting and using all 4 PCI-E slots and nothing changed I also reset the Antminer back to factory setting and set the IP address and my pools back up again, then rebooted still nothing, so I opened it up to see if there was excess Thermal Paste and there wasn't, if anything there didn't appear to be enough on some of the chips, so I spread it over carefully to cover each chip, put it back together again and hey presto all 0's again! very strange but hey I am glad to have gotten rid of the -
|
|
|
|
squashpile
|
|
July 24, 2014, 11:49:14 PM |
|
Ha that's awesome. About the asic status - I have one S1 that will always show one board dead after power off and back on. I'm not kidding I have to reboot it like 20-30 times and it always goes back to all zeros. Once it is all zeros it is totally fine unless it gets powered off again. So try reboots. Power cycles on this one s1 just throw it back into all X status. I have to reboot.
Thanks I tried rebooting and using all 4 PCI-E slots and nothing changed I also reset the Antminer back to factory setting and set the IP address and my pools back up again, then rebooted still nothing, so I opened it up to see if there was excess Thermal Paste and there wasn't, if anything there didn't appear to be enough on some of the chips, so I spread it over carefully to cover each chip, put it back together again and hey presto all 0's again! very strange but hey I am glad to have gotten rid of the -
|
SquashPool - 0% Fee - Dedicated P2Pool VPS - Atlanta, GA - SSD - Gig uplink
|
|
|
|