[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[HunterS]

I will pay .2BTC for 200k

good luck getting them for that price

[1714126260]

1714126260

[1714126260]

1714126260

[1714126260]

1714126260

[1714126260]

1714126260

[omgbossis21]

1 209715200 500 7

Those points look like more than 500gb ?  I don't understand the plot numbers quite yet how much space should this acquire?   What happens if you run out of space it just mines with the space it used?

[eon89]

So if I need to turn my computer off before it finishes making the plots I had it working on I can just start it up on a higher set of numbers and I won't encounter issues?

[burstcoin]

1 209715200 500 7

Those points look like more than 500gb ?  I don't understand the plot numbers quite yet how much space should this acquire?   What happens if you run out of space it just mines with the space it used?

That's more like 50TB

If you're trying to fill a 500gb hdd, try 1843200. That'll do 450gb, then you can see how much farther you want to go from there.

So if I need to turn my computer off before it finishes making the plots I had it working on I can just start it up on a higher set of numbers and I won't encounter issues?

Yeah, you'll get that read error message every block, but it will mine fine

[PeaMine]

For example, if the external drive is /external and poc is installed in /home/user/pocminer ?

ln -s /external/plots/* /home/user/pocminer/plots

Thanks, I'm needing to do one plot inside the normal location (/home/user/pocminer/plots/ ) and then another on another drive that I didn't want to put a copy of pocminer on, but I guess if that's the only way then I'll have to do it lol.
I tried making a symlink to just one file, but I must be doing it wrong as it's not putting the 2nd external plot, on the external.

[jzhoulon]

1 209715200 500 7

Those points look like more than 500gb ?  I don't understand the plot numbers quite yet how much space should this acquire?   What happens if you run out of space it just mines with the space it used?

That's more like 50TB

If you're trying to fill a 500gb hdd, try 1843200. That'll do 450gb, then you can see how much farther you want to go from there.

So if I need to turn my computer off before it finishes making the plots I had it working on I can just start it up on a higher set of numbers and I won't encounter issues?

Yeah, you'll get that read error message every block, but it will mine fine

hi,dev, if wallet runs in multiple computers , that is each wallet have there own nxt.myAddress. but the same account, will it has some confilict situation?

[SpeedDemon13]

1 209715200 500 7

Those points look like more than 500gb ?  I don't understand the plot numbers quite yet how much space should this acquire?   What happens if you run out of space it just mines with the space it used?

That's more like 50TB

If you're trying to fill a 500gb hdd, try 1843200. That'll do 450gb, then you can see how much farther you want to go from there.

So if I need to turn my computer off before it finishes making the plots I had it working on I can just start it up on a higher set of numbers and I won't encounter issues?

Yeah, you'll get that read error message every block, but it will mine fine

I don't know if this has been ask, but what is the preferred file format for this to run optimally? ie. NTFS, EXT(2/3/4),FAT32, etc....

Wouldn't it be best to use maximum disk capacity of 80~85% of the disk? Because Windows will allocate a portion all ready for is MBR and other NTFS operations. ie. 500GB at 85% is 425GB....

Would this run ok if ran in a disk array of RAID0 to have a larger plot size? Since plot size dictates the hashrate.....

[omgbossis21]

1 209715200 500 7

Those points look like more than 500gb ?  I don't understand the plot numbers quite yet how much space should this acquire?   What happens if you run out of space it just mines with the space it used?

That's more like 50TB

If you're trying to fill a 500gb hdd, try 1843200. That'll do 450gb, then you can see how much farther you want to go from there.

So if I need to turn my computer off before it finishes making the plots I had it working on I can just start it up on a higher set of numbers and I won't encounter issues?

Yeah, you'll get that read error message every block, but it will mine fine

I was going for 500gb to see how much more after that I could still do after wiping some stuff.  Im well over the 500gb now that's why I asked LOL.  If I just close it while its making the plots Im good to go?  The generated plots will continue to be mined with correct? 

[Depredation]

Yes! Got my third block, I'm only at 200 GB right now.

[omgbossis21]

damn im at 695 gigs so far, no blocks.

[Depredation]

Any news on exchanges or pools?

[goldmaxx]

WTB BURST
Please PM me your price per 1000 BURST.

Regards

Goldmaxx

[Sy]

WTB BURST
Please PM me your price per 1000 BURST.

Regards

Goldmaxx

The mature time is 1400 blocks, we are around 770...just sayin.

[piccionipier]

WTB some BURST
Please PM me your price per 1000/2000 BURST.

Thanks 

[jzhoulon]

damn im at 695 gigs so far, no blocks.

how many miner did you run , in my experience, one miner with mklink would be better than run several miner in each drive, for  switching process would take much time

[goldmaxx]

WTB BURST
Please PM me your price per 1000 BURST.

Regards

Goldmaxx

The mature time is 1400 blocks, we are around 770...just sayin.

Thank you...

[BurstBurst]

Are you sure it is 1400 blocks to mature a block ? How come there are already transaction of BURST sent ?

WTB BURST
Please PM me your price per 1000 BURST.

Regards

Goldmaxx

The mature time is 1400 blocks, we are around 770...just sayin.

[redsn0w]

Are you sure it is 1400 blocks to mature a block ? How come there are already transaction of BURST sent ?

WTB BURST
Please PM me your price per 1000 BURST.

Regards

Goldmaxx

The mature time is 1400 blocks, we are around 770...just sayin.

Yes , it is like nxt system.. when you reach the 1440 confirm  the burstcoin will appear you.

[Siggi84]

Are you sure it is 1400 blocks to mature a block ? How come there are already transaction of BURST sent ?

WTB BURST
Please PM me your price per 1000 BURST.

Regards

Goldmaxx

The mature time is 1400 blocks, we are around 770...just sayin.

Yes , it is like nxt system.. when you reach the 1440 confirm  the burstcoin will appear you.

Why is there already transactions? It may still be no coins in circulation !?

[burstcoin]

Are you sure it is 1400 blocks to mature a block ? How come there are already transaction of BURST sent ?

WTB BURST
Please PM me your price per 1000 BURST.

Regards

Goldmaxx

The mature time is 1400 blocks, we are around 770...just sayin.

The block maturing is referring to the amount of blocks that coins had to sit before they could be using in proof of stake in the original nxt code. I didn't realize it displayed that until after release, so the display wasn't removed. The coins can be spent just fine.