Sorry if this has been answered already but what would the expected delivery dates be if I ordered a Starter kit and a couple of h-boards today?
You will get it for Oct Delivery. ps: miner will start ship out at end of Oct. Is there a confirmation that October delivery shipping takes place in end of Oct?
|
|
|
Has anyone mined via wireless instead of ethernet cable? How difficult would it be to set up?
The rPI has a very old ARM11 cpu which is being taxed already by the stratum proxy process. It would be best to delegate wifi using an external device.
|
|
|
Do we know which chip is which # in the .stat.log ?
Sure, you have [board:chip] on every line and on the board chips are numbered from 40 to 4F beside each chip. Chips start in the lower left corner, connector facing down, go up, then down, then up, then down again reaching the lower right corner of the board. spiccioli \/ \/ 4| 5| 12 | 13| 3| 6| 11 | 14| 2| 7| 10 | 15| 1| 8| 09 | 16| ^ ^
|
|
|
Hi guys,
Just want to give you an update from the floor.
3. The bitfury devices are very finicky. We can lose over 10TH without any devices going offline. Rest assured that we aren't removing hardware and getting this smoothed over is our absolute highest priority.
Thanks, Jared
I am sure you guys are the experts, but there are some good tips in this thread in case you might have missed out on some. https://bitcointalk.org/index.php?topic=287590.0
|
|
|
Awesome, Thank you Dave. If you need another team member...holler P.S. I plan on buying more H boards and maybe a few more kits. I take freebies too Freebies welcome anytime
|
|
|
I wonder how is October boards shipping looking right now.
|
|
|
After removing pads and using Arctic MX2 + Firmware / speed 9 + 30s Freezer trick BAJ 1: max 48C 3.77V | 9.278G/9.365Gh/s | A:67107 R:396 HW: 390 WU:131.2/m
|
|
|
Using pencil trick, I had an H-Card go from 21 GH/s to 39 GH/s . However, after 60 seconds the hashrate slowly decreases to lower than 21 GH/s. Is this a result of the auto-tuning?
EDIT: When miner is restarted, card goes back to 39 GH/s .. but then does the same thing.
My guess- The regulator autoshutting
|
|
|
I'm looking to sell my 1500Gh Mini Rig order. Even though they are slowly shipping, now that it's three separate 500Gh units, I can't host them all.
So are you asking 170 BTC for 1500GH/s package, or one 500GH/s minirig?
|
|
|
You are asking an unrealistic price for just an m-board. Heck even if you include the price of the Pi it does not even come close to being a realistic price. You are better off keeping it and buying h-cards for it.
You should take that with Megabigpower. I paid almost USD 800 for this. Holy shit, that's a lot! Well, now I understand your asking price. Thanks for clarifying. Good luck with your auction! Thanks buddy Glad it's clarified.
|
|
|
You are asking an unrealistic price for just an m-board. Heck even if you include the price of the Pi it does not even come close to being a realistic price. You are better off keeping it and buying h-cards for it.
You should take that with Megabigpower. I paid almost USD 800 for this.
|
|
|
+1, It would help if we have more ASIC diversity. Right now there are only 4 available chips, and shipping speed's not upto the mark. a) Bitfury b) BFL c) Avalon d) Bitfountain
|
|
|
OP did a nice call. Likely will end October between 200 and 300 million.
Thanks, looks like difficulty increase is on track with the prediction.
|
|
|
d) Pencil mod the board until voltage reaches 0.8V. One of my boards is at 0.8V another at 0.84V. I would say 0.85V is the max after which either the regulator will shut down or the hash rate will drop dramatically. how many is it in ohm on resistor? i usually donot measure ohms, I measure the output voltage of the regulator. But I think it should be between 1.05 to 1.08K on the mounted resistor.
|
|
|
|