441
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Swedish ASIC miner company kncminer.com
|
on: October 02, 2015, 03:54:09 PM
|
Another reminder: NOTE TO ALL!!!!! DO NOT USE the upgrade button status page. Its going to be removed from the next release.
Reason: Because the repo is now private, I made the public repo host just the details of the project and release history. So no actual files will be downloaded .. hopefully the upgrade button will just error out when trying to be used =)
|
|
|
442
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Swedish ASIC miner company kncminer.com
|
on: October 02, 2015, 02:44:27 PM
|
I'd also like to have an adjustable PSU efficiency option. I really don't think anyone is mining with such low (85%) efficency PSUs anyways! Personally I'm running 93.5%. Would be nice to have a box to adjust somewhere in the settings.
Well, before I make any changes to wall watts .. I need a more concrete estimation sample size to make a more accurate guess of actual effeciency. Without that data its kinda pointless. Do you know your actual wall consumption? The more people that chime in on this the better!
|
|
|
443
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Swedish ASIC miner company kncminer.com
|
on: October 01, 2015, 08:27:24 PM
|
Guys is there any ideas you would like to see in future releases? If you are not a paid member yet, what feature would cause you to become a paid member? For paid members , do you have any ideas we can implement to the current version?
Vegas
Would like to able to change wall efficiency when using 94% efficient PSU, when temp rises it automatically lowers clock speed, however, when temp goes down, it doesn't go back to initial speed? status page auto refresh? Just these few improvements for now, btw I bought the software on eBay. Thanks. If your running an extremely early version it will not clock back up, correct. But if your running one of my later versions v99+ should be raising the clockspeed to where it was initially. But keep in mind, as a safety measure it does not start raising clocks until temps have lowered to 10% below the specified temp threshold, OTHERWISE it could get stuck in a loop of constantly raising, lowering, raising, lowering ..... due to it being on the "edge" of the specified temp. Far as wall watts goes... I cant account for everyones power effeciency so, custom making builds for all effeciency variances across all miners is out of the question. I could perhaps *maybe* put in a one time box that allows u to set ur effeciency then after its set the box no longer appears(for cleanliness sake) OR I could just leave it there, but I dont want the interface getting cluttered LOL! Status page already auto refreshes =)
|
|
|
444
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Swedish ASIC miner company kncminer.com
|
on: October 01, 2015, 03:49:06 AM
|
I have a better idea, give the free loaders a week to pay up at current price, then double the price
either way it's a bargain, but ya gotta do something to get the pond scum eating bottomfeeders motivated :\ (did I really say that?)
I love my tarky Titan firmware, makes things so much easier
I think that may hinder sales to new users =/ I have no way of *shutting off* current free users from the firmware. They will just cease to get updates unless they pay for future releases.
|
|
|
445
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Swedish ASIC miner company kncminer.com
|
on: October 01, 2015, 02:58:07 AM
|
About time to keep those parasites away. When will those cheap bastards understand that there's no such thing as free lunch. So far I'm very happy with my purchase as i now rarely have to babysit my titans. Also the log file is much more helpful now than it was before. Overall it was well spent investment. Just make sure the firmware is properly protected as the cheapskates will try to crack it for sure. Hello everyone, GenTarkin and I thank you for your support. We wanted to update you on major changes that only affect the free users. Nothing will change for premium paid users. We have been looking over the free downloads VS. premium sales, and it is very unbalanced in favor of the free version. It appears that a high percent of people are using the free version, and we have only received a few donations, in short its being abused. Our intention with the free version, is to help those that could not afford the premium, and maybe they could donate a little over time. We want to further accelerate this project and fund it further and bring you even more exciting features. In order to do this , we are forced to close access to the free version indefinitely. We apologize and we hope you understand. If you see the value in the work we do, then please show us your support by purchasing premium on Ebay or my site (in our signatures).
How this will be rolled out: The github project is now private, the README on the github repo will still have all changes & features , it will be updated as GenTarkin continues to develop. This does not mean the project is closed source however. If anyone requires it, the source can be made available. Per release info will eventually be migrated to the public placeolder as well (old Titan public repo of mine). Also, for ALL current users(paid & free) ... the UPGRADE button on status page will no longer function. It will be removed from future releases. Releases will continue to be distributed as .bin upgrade files.
Gentarkin and Vegas.
Wow! thanks a bunch for ur praise and review =) ... guess my hard work is worth more than I give myself credit for at times haha! Just to make sure ... u do have the latest v99c running right? If not, contact vegasguy w/ details how to attain it.
|
|
|
446
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Swedish ASIC miner company kncminer.com
|
on: September 30, 2015, 09:05:03 PM
|
Just to follow up, next release will include the read only API option for all ip's under MINING tab.
I might be throwing in full text translation for all pages to chinese ... possibly other languages in other future releases. Other stuff in future release, reworking of graphics background and logo. Tips&Tricks tab for information etc... in future releases.
Minor fix: Renaming of page titles in browser so they no longer say KNC.
|
|
|
448
|
Bitcoin / Hardware / Re: Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip
|
on: September 22, 2015, 06:14:02 PM
|
I've seen it asked how to solo mine with an AntS1 The solution: 1) Update the cgminer in the AntS1 Bitmain's cgminer is quite old and doesn't contain the fixes that are in my version to repair the problems they put in their version. See the post above for details. Then do 2 or 3: 2) The simplest solution is to solo mine at solo.ckpool.org No changes required. Read the first post for how to connect and the details about the advantages of using solo.ckpool.org over mining to your home bitcoind https://bitcointalk.org/index.php?topic=763510.0Of course you should have a home bitcoind running, but mining to it has a MUCH higher chance of losing a block if you find one, unless you configure it's network connectivity better than some pools do. 3) Otherwise you can solomine to your own bitcoin by passing extra options to cgminer in your AntS1 The trick here is that the bitmain script that starts cgminer simply copies what you put in the pool info and passes that to cgminer So, you can add extra cgminer options by editing a "PoolX password" field under the Status/Miner Configuration tab In my miner I set the name the API shows for my Ant by setting "Pool1 password" to "pass --api-description Ant" You must enter a password, and put a space after it, then you can add other cgminer options. Firstly lets assume your bitcoind is running in standard settings. You'll need to know the IP address of it, but lets guess it might be 192.168.0.10 <- of course you need to work out what it is and change it below - it's the IP address of the computer running bitcoin Next you need to know the bitcoin configured Username and Password in the bitcoin.conf and put them in the highlighted places below The Username and Password in the bitcoin.conf are the 2 lines: rpcuser= Usernamerpcpassword= PasswordYou also need to allow the Ant to mine to it, so you may need to add a line like this to your bitcoin.conf rpcallowip= 192.168.0.199if 192.168.0.199 is the IP address of your Ant Lastly you need a payout address to mine to - like 1xxxx - of course you need to use your address, not 1xxxxTo solo mine directly to your local bitcoind set the Pool1 settings as so (without the quotes ") "Pool1" "http:// 192.168.0.10:8332" "Pool1 worker" " Username" "Pool1 password" " Password --btc-address 1xxxxx" The settings don't need to be Pool1, you can use Pool2 or Pool3 and have solo as a backup. You can also set the password field like follows so it mines to all 3 pools at the same time: "Pool1 password" " Password --btc-address 1xxxxx --load-balance" this is only getwork tho right? ... any way to make a stratum connection to my *coin*d wallet?
|
|
|
449
|
Local / 山寨币 / 宣布:自定义KNC泰坦固件 - GenTarkin的国防部! - 基于关闭股票V2.00固件
|
on: September 22, 2015, 03:01:56 PM
|
使用谷歌翻译为缺乏更好的选择,不过是想让社会知道我的固件KNC泰坦=) https://github.com/GenTarkin/Titan基于2.0固件KNC KNCminer泰坦,我modificatoins:*编码瓦特/可靠性泰坦和安全意识...
死模处理的新方法 - 功率循环立方瓦特/死死,试图得到它的工作W / O型手动电源循环。
注:似乎有一个不断增长的混乱量,以什么上面的意思。 死死只是指模具其中去睡觉,降,停散列......我的固件不处理完全死亡(硬件级)死亡!那些仍然需要被设置为OFF!
新增VS较新的5.3.0版本库存5.1.0 BFGminer版本之间切换的能力。
新增DCDC温度监控和对模具到DCDC临时工的25MHz投放的纠正措施都低于指定的阈值。
除了以上所述,模具而以前节流将由10%提高它们的时钟一旦下阈值温度设定。
樊失败保护 - 工作时DCDC启用了监控,如果温度升高10℃以上的阈值或进入115℃,将设置这些模具为OFF。
FAN-FAIL通知添加状态页面和LCD显示的立方体(S)W /可能发生故障的风扇。
模具造成不断的软/硬复位会自动绕过未来复位。消息将在先进的网页显示,如果任何模具得到autobypassed和选项清除列表。
增加了更多的统计数据,以状态页面。
增加了矿工的名字,不仅地位,但采矿与高级页面。
增加了捐赠状态,以反映其捐赠计划乌尔巨人正在运行。
在状态页面增加了MOD版的信息。
增加了升级按钮,状态页以执行OTA更新到我的最新版本!
闪光的能力我国防部通过系统 - 以股票2.00 KNC固件>使用托管在我的版本的.bin文件升级的一页!
在系统增加的选择禁用的lighttpd访问loggin(节省SD卡的寿命)。
在创建备份,现在节省了频率,电压和矿工名(如果指定)。
重新设计的所有品牌的图形和信息的WebGUI。
改进的液晶读数显示我的MOD和版本信息。
Integraded p4fg的KNCminion的WebGUI界面和它的状态页放链接。
选择启用/禁用所有IP的采矿页面只读API访问。
注:DCDC阈值设置和BFGMiner版本可设置在在高级选项卡的WebGUI。当前DCDC MOD设置和运行BFGMiner版本显示在高级选项卡。
香港专业教育学院的形式实现2付款方式,详情如下:
前期支付$ 50的版本,已禁用的日常捐赠费......看到这个职位的详细信息及问题:https://bitcointalk.org/index.php?topic=170332.msg12194406#msg12194406(vegasguy正在处理加工及发行IMG预付费版)购买去这里:http://bitcoinlasvegas.net/kncminer-titan-custom-firmware-mod-paid-membership-page/
可供下载的版本,我的版本的IMG这里github上,这有一个内置.75%日常捐赠,你的泰坦矿对我来说大概11mins /天。
注:转会费的/销售只为我的自定义修改原来的固件。我不是卖原来的固件。
免责声明:unforunate甚至同时安装我的固件乌尔泰坦灾难性的失败......我在没有办法承担损害赔偿。
*我还没有编码任何伤害巨人,我已经在很大程度上创造了土卫六更聪明(更可靠和更安全的)运行状态处理。
|
|
|
456
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: CUSTOM KNC TITAN FIRMWARE! based off KNC's v2.00
|
on: September 17, 2015, 06:43:49 PM
|
!!!ANNOUNCING!! v.99c for premium/prepaid/predonated members! --v.99b is now available for *free*(.75% don) users. PREMIUM members, you should soon see the updated v.99c in your member page which you were supplied when you purchased the firmware. "vegasguy" will supply you with more info. Release notes: https://github.com/GenTarkin/Titan/releases/tag/v.99cAutoBypass Dies, BFGminer 5.3.0, pf4g's KNCminion & more!
Major changes in this release: 1. Auto-bypass of dies which cause constant soft / hard resets. How this works: If a die has caused more than 5 soft / hard resets within 2 hours then that die will be flagged for autobypass - meaning monitoring of its "hashing health" will be further ignored and the die will be on its own. Its DCDC's will still be monitored for temperature conditions though, so if soft / hard resets are being caused by temp issues .. these will NOT be ignored! The list of dies bypassed is persistent across pi reboots etc, when a die has been bypassed a message will be shown on ADVANCED page w/ an option to clear the autobypass file. 2. Updated BFGminer to 5.3.0 3. Integrated pf4g's KNCminion webgui extension & added a link "more goodies" on status page.
Minor changes & fixes: 1. Disabled http access logging by default(option still exists to enable in SYSTEM page). 2. Set bfgminer 5.1.0 as default miner to be ran (can still change it to 5.3.0 via ADVANCED page). 3. Minor tweaks to ADVANCED running bfgminer version readout. 4. Added reset count per die to /var/log/monitordcdc.log 5. Optimized various sections of my code additions in monitoring script. 6. v.99b made available for "free" users.
NOTES - as usual , please contact me in bitcointalk.org forum or litecointalk.org for w/ bugs, questions etc... For people running the *free*(donate version) v.99a version, you can either update via the UPGRADE button on STATUS page OR download the .bin file from here: https://github.com/GenTarkin/Titan/releases/tag/v.99b
|
|
|
458
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Swedish ASIC miner company kncminer.com
|
on: September 16, 2015, 05:53:31 PM
|
!!!ANNOUNCING!! v.99c for premium/prepaid/predonated members! --v.99b is now available for *free*(.75% don) users. PREMIUM members, you should soon see the updated v.99c in your member page which you were supplied when you purchased the firmware. "vegasguy" will supply you with more info. Release notes: https://github.com/GenTarkin/Titan/releases/tag/v.99cAutoBypass Dies, BFGminer 5.3.0, pf4g's KNCminion & more!
Major changes in this release: 1. Auto-bypass of dies which cause constant soft / hard resets. How this works: If a die has caused more than 5 soft / hard resets within 2 hours then that die will be flagged for autobypass - meaning monitoring of its "hashing health" will be further ignored and the die will be on its own. Its DCDC's will still be monitored for temperature conditions though, so if soft / hard resets are being caused by temp issues .. these will NOT be ignored! The list of dies bypassed is persistent across pi reboots etc, when a die has been bypassed a message will be shown on ADVANCED page w/ an option to clear the autobypass file. 2. Updated BFGminer to 5.3.0 3. Integrated pf4g's KNCminion webgui extension & added a link "more goodies" on status page.
Minor changes & fixes: 1. Disabled http access logging by default(option still exists to enable in SYSTEM page). 2. Set bfgminer 5.1.0 as default miner to be ran (can still change it to 5.3.0 via ADVANCED page). 3. Minor tweaks to ADVANCED running bfgminer version readout. 4. Added reset count per die to /var/log/monitordcdc.log 5. Optimized various sections of my code additions in monitoring script. 6. v.99b made available for "free" users.
NOTES - as usual , please contact me in bitcointalk.org forum or litecointalk.org for w/ bugs, questions etc... For people running the *free*(donate version) v.99a version, you can either update via the UPGRADE button on STATUS page OR download the .bin file from here: https://github.com/GenTarkin/Titan/releases/tag/v.99b
|
|
|
459
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Swedish ASIC miner company kncminer.com
|
on: September 16, 2015, 03:37:41 AM
|
Ok, Im gonna call a vote... Who all would be ok w/ readonly api access from *any* ip address... (all subnet ip's & any external ip's that are allowed access through firewall)
Not me. Just do some checkboxes, dude. Hrm... will see, maybe Ill just throw this bit into the next release after v99c .. =)
|
|
|
|