If anyone knows whats going on here... I have setup API to point to my antminers, confirmed outside API access is working... I go to leaserig.net's test site and this is the result...
Testing command "summary"... FAILED STATUS=S,When=1399081685,Code=11,Msg=Summary,Description=cgminer 4.2.2a|SUMMARY,Elapsed=16971,GHS 5s=197.10,GHS av=199.93,Found Blocks=0,Getworks=600,Accepted=3023,Rejected=3,Hardware Errors=6387,Utility=10.69,Discarded=14540,Stale=0,Get Failures=0,Local Work=499518,Remote Failures=0,Network Blocks=22,Total MH=3393012469.0000,Work Utility=2793.02,Difficulty Accepted=773888.00000000,Difficulty Rejected=768.00000000,Difficulty Stale=0.00000000,Best Share=1432204,Device Hardware%=0.8020,Device Rejected%=0.0972,Pool Rejected%=0.0991,Pool Stale%=0.0000,Last getwork=1399081685,MHS av=199927.26,MHS 5s=197098.08,MHS 1m=201692.09,MHS 5m=200584.22,MHS 15m=199883.52|
I dont get how thats FAILED?
|
|
|
Sorry for the downtime ... to my customer =/ ... I refunded him for the amount of BTC owed due to my rig downtime while he was still renting it (15mins)
|
|
|
First off, I just joined up a couple days ago....
I gotta hand it to you guys a LeaseRig.net This is the type of renting services website Ive wanted to see for a long time. Providers having direct control over their prices, timeframes, ads, & service. Renters having direct control(mining directly on providers cg/bfg/sg miner rigs) all the while still playin the market game =) Communication between providers & renters.
*a means for providers to get some decent community reputation as well!
Its absolutely fucking brilliant what you guys have made! I wish and hope something like this or even this would destroy cex.io!!!!
Thanks a ton!!!
|
|
|
Anyone using cpuminer? Care to post your results?
I tried it and its way slower than cgminer 3.7.2 =( ... at least using my pi as host, which come to find out it was having major USB issues w/ the gblades... so maybe thats why it was slow.
|
|
|
Just noticed that switch marked ASW100 - any info/idea/guess what's that for?
Did u try pushing it? Im guessing its some sort of reset button... but just a wild guess outta my ass tho =P
|
|
|
Well, when I plugged the 2 gridseeds into a 750w GOLD PSU, that was already running a single antminer S1 ... power measured at the wall went from 425 to 600w for the 2 blades mining...
|
|
|
this work w/ blades or do binaries need to be updated?
|
|
|
...
not for me =( ... id give anything to have cgminer working on my rpi but the USB bus resets after a few minutes of mining and miners stop =( I can only get minerd(cpuminer) to work stable on the USB ports since it seems to communicate differently through them or something... but cpuminer is like 1MH slower and for some reason it doesnt seem to report the pool accepting all the shares generated. Like 2 nonce found messages would scroll past but only 1 accepted at pool ... with no reject meessage either. Happens a few times a minute. So, the avg reported pool hashrate by minerd is like 1-2MH less than cgminer 3.7.2 hosted on a laptop. I wish I could try bfgminer see if it works more stable on the rpi
The hub I have it all plugged into is powered as well. So, I dont know wtf the deal is =(
I used a fresh debian install ... and the orginal cgminer from andreed ... wrong hashrate ... but doesn't matter ... and changed the cmdline ... slub_flag or something like this ... and it works stable 48h and more Yeah I tried that flag, same behaviour =( ... oh well guess its fucked.
|
|
|
Question, is there a resistor that can be lowered in resistance to achieve the OV? much like there is w/ a resistor divider type circuit? I dont know how this board works , dont know where diagram is. But if there is please let me know which resistor =) Thanks
|
|
|
I have two blades and with bfgminer they work only on 2.5 to 2.6 MHz and also one of them after 10 minutes goes DEAD and after restarting says can not write to com port 7 I use 4 port HUB not powered.
With cgminer there is a big problem to make it working.
I use it on windows so is there any advice what to do? Frequency is 800Mhz
cgminer works flawless on a raspberry ... super stable at 5.5 on the pool not for me =( ... id give anything to have cgminer working on my rpi but the USB bus resets after a few minutes of mining and miners stop =( I can only get minerd(cpuminer) to work stable on the USB ports since it seems to communicate differently through them or something... but cpuminer is like 1MH slower and for some reason it doesnt seem to report the pool accepting all the shares generated. Like 2 nonce found messages would scroll past but only 1 accepted at pool ... with no reject meessage either. Happens a few times a minute. So, the avg reported pool hashrate by minerd is like 1-2MH less than cgminer 3.7.2 hosted on a laptop. I wish I could try bfgminer see if it works more stable on the rpi The hub I have it all plugged into is powered as well. So, I dont know wtf the deal is =(
|
|
|
Im trying to mine on this pool but whatever pool info I give cgminer 3.7.2 ... it just says "stratum auth failed" or something along those lines. I tried all pool addresses and even tried the default PND addy provided in the example. Help?
|
|
|
Barely any considering they consume under 100w each.
|
|
|
I know this is a little off-topic but how many blades can you run on 1 ras pi?
We have been running 4 off one Pi with our firmware with no issues. Think we maybe able to get to 6 or 8 …. working on it. Question, how the hell are you able to do this? I have 2 pi's and after about a minute of mining the USB port just resets and mining stops. I have a powered hub plugged into the rpi's USB port and the miners plugged into the powered hub. Each pi had the same freaking issue. Please advise! =)
|
|
|
look at the price plummet as a result of this news.....
|
|
|
Question, the HW shown, is that HW count of diff1 shares or vardiff shares?
|
|
|
So, question, the cgminer 3.7.2 that works in windows for the gblade. The HW count, is that diff1 count or vardiff HW count?
|
|
|
Wait, blades are only 1375$ now.... and you said in a PM shortly before that price change, that you couldnt do 3btc per?!?!?! ... WTF dude... atari02 Why did ya tell me no and then the price dropped not more than an hour later.
I swear all suppliers are fucking evil! I hate the ASIC industry!
|
|
|
Truth be told, the only reason all these alt coins exist is to be gamed. Mining, trading ... pick your gaming poison. End of story. As coins die, some random fuck will copy n paste a new coin to be speculatively traded / mined. As long as people still buy the random-meaningless-shit coins on exchanges, multipools will exist and work.
|
|
|
is there anybody know which pool can let other person see my hash rate like eligius, i mean litecoin mining, i will get one sample unit soon and i am planing to show its hash rate here
or you can mine on any litecoinpool and post your api key so that we can see your hash rate. What is the expected price of miner ? Dont think that matters much, given the demand history of ASIC's ... manufacturers can charge whatever the fuck they want and people still buy them.... fucking amazing.
|
|
|
|