Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Claymore]

Still no linux version of 6.1?
Happy running 5.3 with AMD GPUs but I'd like to try it with NVIDIA GPUs too.

Within 24 hours I will release v6.2, this version will have Linux build too. Note Linux version is linked to cuda 7.5 so recent drivers are required.

[alrami]

ON THE PREVIOUS PAGE, A POSTER CLAIMED 36MH/s WITH HIS 1070--

So I am doubtful of some claims.  980ti cards don't do well on Dagger-Hashimoto.       --scryptr

I will try to do same too
But i have Gigabyte 1070 - it have one 8-pin only, so i will be unable to get a high DTP (connectors will be overloaded)
in any way 1070 have high mem oveclock ability, but 980ti have a twice wider memory bus than 1070

[scryptr]

ON THE PREVIOUS PAGE, A POSTER CLAIMED 36MH/s WITH HIS 1070--

So I am doubtful of some claims.  980ti cards don't do well on Dagger-Hashimoto.       --scryptr

I will try to do same too
But i have Gigabyte 1070 - it have one 8-pin only, so i will be unable to get a high DTP (connectors will be overloaded)
in any way 1070 have high mem oveclock ability, but 980ti have a twice wider memory bus than 1070

980ti CARDS DON'T DO WELL ON DAGGER HASHIMOTO--

My 980ti cards has 2 8-pin connectors, each on a separate PCIe cable.  I have overclocked the memory +320, more than my 970 cards or my 960 cards could handle.  It only gets 22MH/s.  Most reports I read say the same, I have never heard of a 32MH/s 980ti.

GTX 1070 cards can be overclocked far higher.  I don't have one, but they can truly outperform a GTX 970.  I'll worry about a 1070 when the sales and rebates start showing up.       --scryptr

[qqqq]

on 6.1.3, after starting my fans resets to autospeed, but if I set the option -tt 0 I can`t keep track of temperatures

Try this:
https://mega.nz/#!HphjhRyI!ynSMiXk4NfNWsLbjmD03noY93Zk5mboCq1UacB-S570

Excellent !!! everything is working

OK, after 15 hours solo I have 9 blocks rejections and no one confirmed that something was wrong with 6.1.4b+parity 1.3

I go back to Genoil ....

even getwork error has fixed in this version, but, still have an error when submit share,

I want confirm that something happened with solo ETH (geth 1.4.10) on last revisions of miner. 10 days and no blocks with 150-300 mhs. Claymore could you confirm that ETH solo is ok ? ETC seems fine with accepted blocks (Of course i know about different diffs but anyway).

If 5.3 worked for you, 6.1.4b will work too. However, all versions won't work with parity, I fixed it in 6.1.5b only, refer to this msg: https://bitcointalk.org/index.php?topic=1433925.msg15963217#msg15963217

1.4.11 was released 4 hours ago. Will test 6.1 beta5 with 300 Mh\s on ETH solo.

[BTCBusinessConsult]

Plugged in my 290x on the default settings and got 29.5 MHs.

Plugged in my 2 480s, and got 18 MHs on each.

 

Also I noticed that after I run the claymore miner, my AMD catalyst controller always crashes and resets the settings on GPU 0. GPU 1 is unaffected.

Thanks for any input.

[citronick]

I have 2 x R9 Nanos stock, running 27MHs and 8Mhs after tryingout CDM v6.0

Strange this.... 8Mhs, anybody got similar situation?

[TheLAWNoob]

I have 4 1070s. It seems no matter how many cards I enable, it will always hash at about 30MH/s. If I have all 4 then each card does exactly 30 divided by 4.

Newest driver, Win 10, 6.1 beta.

[bctopics]

Claymore runs fine for me for about 5 minutes, then one gpu drops off to "zero mh/s". Then a few minutes later the miner crashes.


command line is this.

set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_SINGLE_ALLOC_PERCENT 100
./ethdcrminer64 -epool us1.ethermine.org:4444 -ewal 0DC6337fb811eb32473060Ca620F010E996EC71c -epsw x -dpool stratum+tcp://sia-us-east1.nanopool.org:7777 -dwal (My Wallet is here )/390s/bctopics@gmail.com -dpsw x -esm 1 -dcoin sia -dcri 20 -allpools 1 -mode 0 -tt -100,-100,-100,-100 -ttdcr 85 -cclock 1160,1160,1160,1160 -mclock 1250,1250,1250,1250 -powlim 20,20,20,20


temps hover around 80c.

I have four 390's from msi

[pwpwpw]

Claymore runs fine for me for about 5 minutes, then one gpu drops off to "zero mh/s". Then a few minutes later the miner crashes.


command line is this.

set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_SINGLE_ALLOC_PERCENT 100
./ethdcrminer64 -epool us1.ethermine.org:4444 -ewal 0DC6337fb811eb32473060Ca620F010E996EC71c -epsw x -dpool stratum+tcp://sia-us-east1.nanopool.org:7777 -dwal (My Wallet is here )/390s/bctopics@gmail.com -dpsw x -esm 1 -dcoin sia -dcri 20 -allpools 1 -mode 0 -tt -100,-100,-100,-100 -ttdcr 85 -cclock 1160,1160,1160,1160 -mclock 1250,1250,1250,1250 -powlim 20,20,20,20


temps hover around 80c.

I have four 390's from msi

thats a very high core clock, see what happends at 1100 or lower / give more voltage to the cards.

[scryptr]

Claymore runs fine for me for about 5 minutes, then one gpu drops off to "zero mh/s". Then a few minutes later the miner crashes.


command line is this.

set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_SINGLE_ALLOC_PERCENT 100
./ethdcrminer64 -epool us1.ethermine.org:4444 -ewal 0DC6337fb811eb32473060Ca620F010E996EC71c -epsw x -dpool stratum+tcp://sia-us-east1.nanopool.org:7777 -dwal (My Wallet is here )/390s/bctopics@gmail.com -dpsw x -esm 1 -dcoin sia -dcri 20 -allpools 1 -mode 0 -tt -100,-100,-100,-100 -ttdcr 85 -cclock 1160,1160,1160,1160 -mclock 1250,1250,1250,1250 -powlim 20,20,20,20


temps hover around 80c.

I have four 390's from msi

thats a very high core clock, see what happends at 1100 or lower / give more voltage to the cards.

TWO THINGS--

     1)  In Windows, the command is "setx GPU_FORCE_64BIT_PTR 0", and not "set GPU_FORCE_64BIT_PTR 0".

     2)  Your clocks are too high.  Some people post impossible overclocks for others to read and attempt.  And, sometimes a single card can be clocked up hiiigh, but multiple cards can't reach the same clock.

Try running the miner with no performance parameters, plain vanilla.  Add performance-boosting commands in small steps.       --scryptr

[citronick]

Claymore runs fine for me for about 5 minutes, then one gpu drops off to "zero mh/s". Then a few minutes later the miner crashes.


command line is this.

set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_SINGLE_ALLOC_PERCENT 100
./ethdcrminer64 -epool us1.ethermine.org:4444 -ewal 0DC6337fb811eb32473060Ca620F010E996EC71c -epsw x -dpool stratum+tcp://sia-us-east1.nanopool.org:7777 -dwal (My Wallet is here )/390s/bctopics@gmail.com -dpsw x -esm 1 -dcoin sia -dcri 20 -allpools 1 -mode 0 -tt -100,-100,-100,-100 -ttdcr 85 -cclock 1160,1160,1160,1160 -mclock 1250,1250,1250,1250 -powlim 20,20,20,20


temps hover around 80c.

I have four 390's from msi

by any chance.... you are using powered risers? And if you are using the ASrock H81-BTC mobo, did you power up the molex connector? I have the same cards, undervolted and overclocked slightly, I get 30MHs with CDM. Easily the best performing GPU for ETH.... but its power hungry, so your need the powered molex and risers to overclock it.

[bctopics]

Claymore runs fine for me for about 5 minutes, then one gpu drops off to "zero mh/s". Then a few minutes later the miner crashes.


command line is this.

set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_SINGLE_ALLOC_PERCENT 100
./ethdcrminer64 -epool us1.ethermine.org:4444 -ewal 0DC6337fb811eb32473060Ca620F010E996EC71c -epsw x -dpool stratum+tcp://sia-us-east1.nanopool.org:7777 -dwal (My Wallet is here )/390s/bctopics@gmail.com -dpsw x -esm 1 -dcoin sia -dcri 20 -allpools 1 -mode 0 -tt -100,-100,-100,-100 -ttdcr 85 -cclock 1160,1160,1160,1160 -mclock 1250,1250,1250,1250 -powlim 20,20,20,20


temps hover around 80c.

I have four 390's from msi

thats a very high core clock, see what happends at 1100 or lower / give more voltage to the cards.

TWO THINGS--

     1)  In Windows, the command is "setx GPU_FORCE_64BIT_PTR 0", and not "set GPU_FORCE_64BIT_PTR 0".

     2)  Your clocks are too high.  Some people post impossible overclocks for others to read and attempt.  And, sometimes a single card can be clocked up hiiigh, but multiple cards can't reach the same clock.

Try running the miner with no performance parameters, palin vanilla.  Add performance-boosting commands in small steps.       --scryptr

I've using ethos actually . So basically ubuntu, the sets work fine.

I'll try some lower clocks. What's odd is I've been running these clocks for two+months in ethos perfectly fine.

Claymore runs fine for me for about 5 minutes, then one gpu drops off to "zero mh/s". Then a few minutes later the miner crashes.


command line is this.

set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_SINGLE_ALLOC_PERCENT 100
./ethdcrminer64 -epool us1.ethermine.org:4444 -ewal 0DC6337fb811eb32473060Ca620F010E996EC71c -epsw x -dpool stratum+tcp://sia-us-east1.nanopool.org:7777 -dwal (My Wallet is here )/390s/bctopics@gmail.com -dpsw x -esm 1 -dcoin sia -dcri 20 -allpools 1 -mode 0 -tt -100,-100,-100,-100 -ttdcr 85 -cclock 1160,1160,1160,1160 -mclock 1250,1250,1250,1250 -powlim 20,20,20,20


temps hover around 80c.

I have four 390's from msi

by any chance.... you are using powered risers? And if you are using the ASrock H81-BTC mobo, did you power up the molex connector? I have the same cards, undervolted and overclocked slightly, I get 30MHs with CDM. Easily the best performing GPU for ETH.... but its power hungry, so your need the powered molex and risers to overclock it.

I am using powered risers, and the asrock h81 btc board. Which molex connector? Wasn't aware I was suppose to power anything out of the ordinary with that board. May I ask what your clocks are? I was getting 33 mh/s with ethos but I'd be happy with 30.

[citronick]

Claymore runs fine for me for about 5 minutes, then one gpu drops off to "zero mh/s". Then a few minutes later the miner crashes.


<snip>

by any chance.... you are using powered risers? And if you are using the ASrock H81-BTC mobo, did you power up the molex connector? I have the same cards, undervolted and overclocked slightly, I get 30MHs with CDM. Easily the best performing GPU for ETH.... but its power hungry, so your need the powered molex and risers to overclock it.

I am using powered risers, and the asrock h81 btc board. Which molex connector? Wasn't aware I was suppose to power anything out of the ordinary with that board. May I ask what your clocks are? I was getting 33 mh/s with ethos but I'd be happy with 30.

Using Afterburner, -100mV, 1050 core, 1125 memory.
I can push it further but the card takes too much amps and watts.
My PSU is 1600w EVGA, and it can barely handle 5 x R390 unless using ROM mods
The rig can do 30MHs x 5 = 150MHs - very stable, cool and has been mining for months.
Using ASrock H81-BTC, Celeron 1840, 8GB RAM, 120GB SSD. Crimson 15.12, Windows 8.1
Powered molex on motherboard and also powered USB risers.
Claymore Dual Miner - mining ETH only.

[scryptr]

ETHOS SETS THE ENVIRONMENTAL VARIABLES AT STARTUP--

And, in Ubuntu, the command is "EXPORT GPU_FORCE_64BIT_PTR=0".  Note the equal sign, "=", not present in the Windows command. The EthOS sets the environmenta variables in a hidden file.  The way you have it written, it would not be an effective command in Linux.  You can just delete it from your startup scrypt.       --scryptr

Claymore runs fine for me for about 5 minutes, then one gpu drops off to "zero mh/s". Then a few minutes later the miner crashes.


command line is this.

set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_SINGLE_ALLOC_PERCENT 100
./ethdcrminer64 -epool us1.ethermine.org:4444 -ewal 0DC6337fb811eb32473060Ca620F010E996EC71c -epsw x -dpool stratum+tcp://sia-us-east1.nanopool.org:7777 -dwal (My Wallet is here )/390s/bctopics@gmail.com -dpsw x -esm 1 -dcoin sia -dcri 20 -allpools 1 -mode 0 -tt -100,-100,-100,-100 -ttdcr 85 -cclock 1160,1160,1160,1160 -mclock 1250,1250,1250,1250 -powlim 20,20,20,20


temps hover around 80c.

I have four 390's from msi

[ps_jb]

Guys,

I know - stupid question, but..

Rig started to reboot occasionally and I do not have a day to figure out what is wrong.

Is it possible to start CDM after rebooting (Win 7 - required password) and run this line:

EthDcrMiner64.exe -epool etc-eu1.nanopool.org:19999 -ewal 0xb1229de282d6869d2bbf9ccdd50a22b7ec081a34/ps_jb/ -epsw x -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal 94e7da5b2612bbdc6cc3dfb40f2d5f7abaf9deb9cd8316a527a8c422eb1ec5eb36bbd8d194f9/ps_jb/ -dcoin sia -dcri 40

Thank you!

[pwpwpw]

Guys,

I know - stupid question, but..

Rig started to reboot occasionally and I do not have a day to figure out what is wrong.

Is it possible to start CDM after rebooting (Win 7 - required password) and run this line:

EthDcrMiner64.exe -epool etc-eu1.nanopool.org:19999 -ewal 0xb1229de282d6869d2bbf9ccdd50a22b7ec081a34/ps_jb/ -epsw x -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal 94e7da5b2612bbdc6cc3dfb40f2d5f7abaf9deb9cd8316a527a8c422eb1ec5eb36bbd8d194f9/ps_jb/ -dcoin sia -dcri 40

Thank you!

remove password from win7 user and make a shortcut of your .bat, put .bat in start-> programs -> startup folder

[ps_jb]

remove password from win7 user

That was easy - thank you!

How to make .bat file ?

[scryptr]

remove password from win7 user

That was easy - thank you!

How to make .bat file ?

USE NOTEPAD--

type the following:

:loop

c:\claymore\ethdcrminer64.exe your launch command line as is

pause
goto loop


Then, SAVE AS ALL FILES, not as a txt file.  Name it "launch.bat", or any name with a *.bat file ending.  If you save it as a *.txt file, it will not work.  And, the file path has to be as claymore is on YOUR system     --scryptr

[PeaMine]

Edit: Updated Windows 7, and now it works, no idea.

For some reason my ASUS RX 480 is BSOD over a driver file when I run CDM.
If I disable it via -di and just use the 390X it works fine, for the 390X.
Tried a format, tried DDU in safe mode, removing everything, disabling 390X and drivers, using both the WHQL and non WHQL 480 drivers(Windows 7 64bit).
Has no issues running numerous 390s with a 290X also, any ideas?

[ps_jb]

type the following:

:loop

c:\claymore\ethdcrminer64.exe your launch command line as is

pause
goto loop


Then, SAVE AS ALL FILES, not as a txt file.  Name it "launch.bat", or any name with a *.bat file ending.  If you save it as a *.txt file, it will not work.  And, the file path has to be as claymore is on YOUR system     --scryptr

Thank you!