Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[pwpwpw]

Then, SAVE AS ALL FILES, not as a txt file.  Name it "launch.bat", or any name with a *.bat file ending.  If you save it as a *.txt file, it will not work.  And, the file path has to be as claymore is on YOUR system     --scryptr

Did like that

:loop

C:\CDM-2\EthDcrMiner64.exe -epool etc-eu1.nanopool.org:19999 -ewal 0xb1229de282d6869d2bbf9ccdd50a22b7ec081a34/ps_jb/ -epsw x -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal 94e7da5b2612bbdc6cc3dfb40f2d5f7abaf9deb9cd8316a527a8c422eb1ec5eb36bbd8d194f9/ps_jb/ -dcoin sia -dcri 40

pause

goto loop

.bat file is in the same directory C:\CDM-2

Does not work - because somehow .bat tries to start from c:\windows\system32

not sure why looping is good, once the miner starts, you won't start it again, if anything fails, the miner resets itself so you won't open it again by looping or maybe it opens twice? that would be a fail

here's my bat

Code:

timeout /t 30

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

timeout /t 5

EthDcrMiner64.exe

start miner 30sec after windows loads.

go to config.txt and put this inside

Code:

-epool etc-eu1.nanopool.org:19999
-ewal 0xb1229de282d6869d2bbf9ccdd50a22b7ec081a34/ps_jb
-epsw x
-dpool stratum+tcp://sia-eu1.nanopool.org:7777
-dwal 94e7da5b2612bbdc6cc3dfb40f2d5f7abaf9deb9cd8316a527a8c422eb1ec5eb36bbd8d194f9/ps_jb
-dpsw x
-esm 0
-mode 0
-dcoin sia
-tstop 95
-dcri 40

Thats all you need, don't put the miner's location in the bat, just put the exe's name and the shortcut handles the location.

go to CDM-2, right click the bat, create shortcut. copy shortcut, go to start, programs, startup-> rightclick, open, rightclick paste.

[IncludeBeer]

Wanted to share my results with 6.1 miner. Specs:
- 1x GTX 980
- 2x GTX 750ti
- Windows 10
- v368.81 driver


ETH - Total Speed: 7.817 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:03
ETH: GPU0 4.717 Mh/s, GPU1 1.566 Mh/s, GPU2 1.534 Mh/s
 DCR - Total Speed: 130.276 Mh/s, Total Shares: 2, Rejected: 0
 DCR: GPU0 78.717 Mh/s, GPU1 26.093 Mh/s, GPU2 25.571 Mh/s


That's really low, right?

[hiddensphinx]

That's really low, right?

yep getting ETH 25Mhs using a single MSI GTX 1070 alone

[Dowper]

Can someone tell me the power draw of RX470 and RX480 on eth mining and then eth+sia mining?

[Volodka_007]

If the miner doesn't work with some pool - let me know its address and port, I'll check it.


Fixed, please confirm:
https://mega.nz/#!WoYEDLzb!2wBQPWVdvqOfkkRMoR8LJ_TgO76cTvtVXL5dpRI1h24

I test it and confirm it`s work.

1 more on ETH  now 70 epoch, on ETC 69,   it happens once a week, there is a gap in epochs 

and after 15 minutes the starting ETC-solo its start devfee and make new dag after thet back again to 69 epoch and drivers are stack and i nead reboot all rigs every 15 minutes       It occurs only on 390/390X...

[xeridea]

Can someone tell me the power draw of RX470 and RX480 on eth mining and then eth+sia mining?

470 150-160 at the wall, 480 would be about 20w more, and eth only about 20-30w less.  One of my cards I can significantly undervolt to save about 20w, the other, not so much, ASIC quality plays a role here.

[ps_jb]

Thats all you need, don't put the miner's location in the bat, just put the exe's name and the shortcut handles the location.

go to CDM-2, right click the bat, create shortcut. copy shortcut, go to start, programs, startup-> rightclick, open, rightclick paste.

Thank you!

[Claymore]

v6.2:

- released version for Linux with nvidia support.
- fixed Ethereum solo mining mode.
- added "-cvddc" and "-mvddc" options for adjusting voltages for latest AMD 4xx cards.
- now you can turn on/off cards in runtime with "0"..."9" keys.
- bug fixes.

[marvykkio]

 
how can I make just siacoin extraction of nanopool with claymore software?
you can paste the string for the bat?

thank you very much

[Claymore]

how can I make just siacoin extraction of nanopool with claymore software?
you can paste the string for the bat?

thank you very much

OP or Readme, "FAQ" section:

- How to mine Decred or Sia ONLY with this Ethereum Dual miner?
  No way. It is Ethereum miner with extra bonus coins. To mine extra coins only use other miners.

[Trimegistus]

v6.2:

- released version for Linux with nvidia support.
- fixed Ethereum solo mining mode.
- added "-cvddc" and "-mvddc" options for adjusting voltages for latest AMD 4xx cards.
- now you can turn on/off cards in runtime with "0"..."9" keys.
- bug fixes.

Are there any significant advantages in using the miner to over/underclock instead of letting WattMan take care of that?

Am I missing something here?

[Claymore]

v6.2:

- released version for Linux with nvidia support.
- fixed Ethereum solo mining mode.
- added "-cvddc" and "-mvddc" options for adjusting voltages for latest AMD 4xx cards.
- now you can turn on/off cards in runtime with "0"..."9" keys.
- bug fixes.

Are there any significant advantages in using the miner to over/underclock instead of letting WattMan take care of that?

Am I missing something here?

For example, there is no WattMan in Linux.

[Trimegistus]

For example, there is no WattMan in Linux.

Ok, but what about in Windows? Are there any advantages?

[Naimon]

For example, there is no WattMan in Linux.

Ok, but what about in Windows? Are there any advantages?

If you're a casual miner, you could have stock settings for general PC use, and over/under clock/volt settings for mining only.  More options are always a good thing, just be creative and you'll find uses for them.

[rawbert]

For example, there is no WattMan in Linux.

Ok, but what about in Windows? Are there any advantages?

One I could think of if miner keeps or reapplies the settings at restart after a crash/hang vs wattman where you need to manually redo the settings.

[Trimegistus]

One I could think of if miner keeps or reapplies the settings at restart after a crash/hang vs wattman where you need to manually redo the settings.

Good point! I never consider that because my rigs are very stable 

[billsmith]

v6.2:

- released version for Linux with nvidia support.
- fixed Ethereum solo mining mode.
- added "-cvddc" and "-mvddc" options for adjusting voltages for latest AMD 4xx cards.
- now you can turn on/off cards in runtime with "0"..."9" keys.
- bug fixes.

ubuntu 14.04 amdgpu-pro_16.30  rx480*6
-No shows temperature and fans speed
-Options does not work "-powlim, -cclock, -mclock"

[Claymore]

v6.2:

- released version for Linux with nvidia support.
- fixed Ethereum solo mining mode.
- added "-cvddc" and "-mvddc" options for adjusting voltages for latest AMD 4xx cards.
- now you can turn on/off cards in runtime with "0"..."9" keys.
- bug fixes.

ubuntu 14.04 amdgpu-pro_16.30  rx480*6
-No shows temperature and fans speed
-Options does not work "-powlim, -cclock, -mclock"

Miner uses ADL to access temps/fans (libatiadlxx.so). Make sure you have latest APP SDK. I did not check it for Linux, if you have latest drivers and APP SDK it means that AMD did not support ADL for latest cards in Linux yet. But if miner shows "AMD ADL library not found, temperature management for AMD GPUs disabled." it means that you don't have ADL lib installed.

[majky80]

Last file Miner i see only v6.0...

[Volodka_007]

If the miner doesn't work with some pool - let me know its address and port, I'll check it.


Fixed, please confirm:
https://mega.nz/#!WoYEDLzb!2wBQPWVdvqOfkkRMoR8LJ_TgO76cTvtVXL5dpRI1h24

I test it and confirm it`s work.

1 more on ETH  now 70 epoch, on ETC 69,   it happens once a week, there is a gap in epochs 

and after 15 minutes the starting ETC-solo its start devfee and make new dag after thet back again to 69 epoch and drivers are stack and i nead reboot all rigs every 15 minutes       It occurs only on 390/390X...

any comments?