Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Biodom]

if I use -dcri parameter, but don't provide any dcri pool info, would ethereum hashing increase?
i don'thave time to set up dcri pools and then exchage the coins.
I want only eth, but at the highest speed possible.
What is the best course of action?

If you don't mine DCR, why do you think that you need DCR pool info?

because according to prior post i can use -dcri param when ONLY mining eth, if I am not mistaken.
Just making sure that doing so is OK without having other dcr related info.
It is counterintuitive to most that they can use -dcri parameter to change eth mining while NOT mining dcr at all (even while using -mode 1).
fake mining dcr to increase eth mining?
A nice trick.

[Xardas2014]

With the ETH/DCR prices, this takes some tuning to max profits lol. Nice work Sir.

[Etemind]

if I use -dcri parameter, but don't provide any dcri pool info, would ethereum hashing increase?
i don'thave time to set up dcri pools and then exchage the coins.
I want only eth, but at the highest speed possible.
What is the best course of action?

If you don't mine DCR, why do you think that you need DCR pool info?

because according to prior post i can use -dcri param when ONLY mining eth, if I am not mistaken.
Just making sure that doing so is OK without having other dcr related info.
It is counterintuitive to most that they can use -dcri parameter to change eth mining while NOT mining dcr at all (even while using -mode 1).
fake mining dcr to increase eth mining?
A nice trick.

It is good that you can use both the ethi and dcri to get the best ETH speed.

[Vyrez]

Thanks for this update!

How to find in the log when -r option is activated? I mean, if something wrong with a GPU, how to find it in the log file. To understand the statistics.

[WhyMe]

Tested on 4 470 4G Armor OC
v8.1 dcri 35 = 111-112 ETH + 1950DCR, ~850w
v9.0 dcri 35 = 94ETH + 3250DCR, ~850w
v9.0 dcri 30 = 101ETH + 3025DCR, ~850w
v9.0 dcri 25 = 106ETH + 2650DCR, ~850w
v9.0 dcri 20 = 106ETH + 2025DCR, ~800w
v9.0 dcri 15 = 103ETH + 1560DCR, ~750w

[chup]

Tested on 4 470 4G Armor OC
v8.1 dcri 35 = 111-112 ETH + 1950DCR, ~850w
v9.0 dcri 35 = 94ETH + 3250DCR, ~850w
v9.0 dcri 30 = 101ETH + 3025DCR, ~850w
v9.0 dcri 25 = 106ETH + 2650DCR, ~850w
v9.0 dcri 20 = 106ETH + 2025DCR, ~800w
v9.0 dcri 15 = 103ETH + 1560DCR, ~750w

Claymore said that hash peak is narrow, so You lost v90 peak somewhere between 5 point dcri-increments.

[deadsix]

Thanks Claymore, I didnt think perf improvement was possible for ETH anymore, but v9.0 give me a flat 2% Increase across all my RX 470 4GB Cards, now running at 26mh/s at just under 95W from the wall

[antantti]

Hawaii hits powerlimit wall badly, I know those could be clocked higher but powerlimiter kicks in even with +50, DCR is +33% before that wall.

Best I can do is 31.8ETH + 1200DCR, need hardware mod to go higher (and heavier cabling+connectors too).

[tytanick]

Hmm, i tested newest clyamore 9 on my RX470 and i see performance decreese from 171 to 167 MH
I will do more tests.

OLD CLAYMORE 8.1



NEW CLAYMORE 9


What do you think guys about this ? Is it only numbers and real speed is the same or is it worse speed ?

[padrino]

Hmm, i tested newest clyamore 9 on my RX470 and i see performance decreese from 171 to 167 MH
I will do more tests.

If you read the initial post it implied dcri was needed to get it tuned right even in ETH only mode. It seems like that is indeed the case when it uses ASM kernels, without tuning it will slow down, you need to set dcri to something lower than the built in default.

[usuksobad]

Hey guys, help me out when i mine on qtminer with 1x rx480 and 2x geforce gtx 980 i get 70mh/s for eth and when i turn on claymore dual mining eth + pasc i get only 30 mh/s, it says 1 maining 25mh/s and other two 3mh/s eatch. Any ideas whats wrong?

[fantomy]

whats everyone getting with claymore9 on the rx480 8gb oc? unmodded bios

[usuksobad]

25

[AltScope]

whats everyone getting with claymore9 on the rx480 8gb oc? unmodded bios

2* rx480 8GB stock with -dcri 42 getting 46-47MH eth 1950-1960Mh Dcr still playing to find most stable value

8gb-sapphire-radeon-rx-480-nitroplus-oc-14nm-polaris-pcie-30-8000mhz-gddr5-1208mhz-gpu-1342mhz-boost cards, ones running the display so giving slightly lower hashes otherwise itd be ~48/~2000

[delle54]

THX very much Claymore. My DCR speed at -dcri 40 almost doubled, while ETH only lost about 0.5 Ms/s.
Great work!!! Now I just need a better CryptoNote CPU miner without -nofee option to speep up XMR-mining.

[Eyedol-X]

Now I just need a better CryptoNote CPU miner without -nofee option to speep up XMR-mining.

+1 on this lol

[fr4nkthetank]

Now I just need a better CryptoNote CPU miner without -nofee option to speep up XMR-mining.

+1 on this lol

Dont really want to put this on claymores thread, but you could try this one out.  Im not mining with my CPU on xmr so idk but its good to try all options.
http://www.cryptominingtalk.com/xmr-stak-cpu-miner/

[joaocha]

Rx 480 8Gb

Doing 30 on eth and 750 on Dcr, Dcri 25 , best value so far

[Dowper]

Best miner update so far. Dual mining Nitro+ 470 8GB - from 30eth/495dcr, now 30.6eth/695dcr, wattage increase only 8 watts per gpu. 270X - again 200dcr increase in dual with expanse. Thanks, Claymore!

[pajche]

Testing right now. 29.6 Mh/s per card for ETH and 415 Mh/s for DCR . RX 470 4GB 88w on ab. I will play with settings tomorrow. I think i can get more mh/s for both dcr and eth, but im sleepy right now .