|
WhyMe
|
 |
April 06, 2017, 04:50:29 PM |
|
Did no Change to my ETH speed but doubled my DCR speed without affecting Power consumption. At least for what GPU-Z used to show in 8.1 and now.
I am getting 29.8 eth and 717 DCR per card with Sapphire Rx470 4GB Nitro with Samsung Ram.
Bios is modded from 1750 to 2k straps.
Ram is overclocked to 2100mhz with 930mV.
Core is 1150mhz with 900mV.
Power consumption is around 92.5w in GPU-Z.
I don't have a kill a watt so i don't know what the system or a single card really pulls from the wall.
There are not many fluctiations in GPU-Z Load or ETH speeds. Only some from gpu and no voltage or default walues seem to fixed. It is so rare.
I am using 17.2. drivers.
Wonder if i can downvolt even more but wont try because my numbers seem good.
Have 4 of these cards in the rig. Running it with a Seasonic 750w Gold psu.
750w is short for 4 470 on dual ! |
|
|
|
|
|
|
|
|
|
"If you don't want people to know you're a scumbag then don't be a scumbag." -- margaritahuyan
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
Xiadas
Full Member
 Offline
Activity: 322
Merit: 100
Blockchain Just Entered The Real World
|
|
April 06, 2017, 04:53:45 PM |
|
Did no Change to my ETH speed but doubled my DCR speed without affecting Power consumption. At least for what GPU-Z used to show in 8.1 and now.
I am getting 29.8 eth and 717 DCR per card with Sapphire Rx470 4GB Nitro with Samsung Ram.
Bios is modded from 1750 to 2k straps.
Ram is overclocked to 2100mhz with 930mV.
Core is 1150mhz with 900mV.
Power consumption is around 92.5w in GPU-Z.
I don't have a kill a watt so i don't know what the system or a single card really pulls from the wall.
There are not many fluctiations in GPU-Z Load or ETH speeds. Only some from gpu and no voltage or default walues seem to fixed. It is so rare.
I am using 17.2. drivers.
Wonder if i can downvolt even more but wont try because my numbers seem good.
Have 4 of these cards in the rig. Running it with a Seasonic 750w Gold psu.
750w is short for 4 470 on dual ! For dual mining, if not undervolt, it needs at least 850W. |
|
|
|
Gagana
Member
Offline
Activity: 80
Merit: 10
|
|
April 06, 2017, 05:04:12 PM |
|
@Claymore, what does it mean? Which GPU? There are 6 ones. Why? ( I expect GPU5 because of the temperature, but... v9.0 18:01:13:672 d78 ETH: GPU0 28.221 Mh/s, GPU1 28.234 Mh/s, GPU2 28.234 Mh/s, GPU3 28.225 Mh/s, GPU4 27.614 Mh/s, GPU5 0.000 Mh/s
...
18:01:21:329 13a8 GPU0 t=74C fan=94%, GPU1 t=71C fan=66%, GPU2 t=73C fan=75%, GPU3 t=73C fan=96%, GPU4 t=72C fan=65%, GPU5 t=57C fan=20%
18:01:21:329 13a8 em hbt: 0, dm hbt: 0, fm hbt: 78,
18:01:21:329 13a8 watchdog - thread 0, hb time 141
18:01:21:329 13a8 watchdog - thread 1, hb time 63
18:01:21:329 13a8 watchdog - thread 2, hb time 141
18:01:21:344 13a8 watchdog - thread 3, hb time 63
18:01:21:344 13a8 watchdog - thread 4, hb time 0
18:01:21:344 13a8 watchdog - thread 5, hb time 78
18:01:21:344 13a8 watchdog - thread 6, hb time 94
18:01:21:360 13a8 watchdog - thread 7, hb time 31
18:01:21:360 13a8 watchdog - thread 8, hb time 63
18:01:21:360 13a8 watchdog - thread 9, hb time 0
18:01:21:360 13a8 watchdog - thread 10, hb time 16688
18:01:21:360 13a8 watchdog - thread 11, hb time 16672
18:01:21:376 13a8 WATCHDOG: GPU error, you need to restart miner :(
|
|
|
|
|
webbeast
Newbie
Offline
Activity: 7
Merit: 0
|
|
April 06, 2017, 05:11:30 PM |
|
Did no Change to my ETH speed but doubled my DCR speed without affecting Power consumption. At least for what GPU-Z used to show in 8.1 and now.
I am getting 29.8 eth and 717 DCR per card with Sapphire Rx470 4GB Nitro with Samsung Ram.
Bios is modded from 1750 to 2k straps.
Ram is overclocked to 2100mhz with 930mV.
Core is 1150mhz with 900mV.
Power consumption is around 92.5w in GPU-Z.
I don't have a kill a watt so i don't know what the system or a single card really pulls from the wall.
There are not many fluctiations in GPU-Z Load or ETH speeds. Only some from gpu and no voltage or default walues seem to fixed. It is so rare.
I am using 17.2. drivers.
Wonder if i can downvolt even more but wont try because my numbers seem good.
Have 4 of these cards in the rig. Running it with a Seasonic 750w Gold psu.
750w is short for 4 470 on dual ! For dual mining, if not undervolt, it needs at least 850W. My seasonic 750w gold kept up for the last week dual mining gpu-z showing 110w for each card. Now they are undervolted. You mean this is not good for longterm? Mind you i have 4 cards not 6. Well ive been mining for a week with old settings dual mining gpu-z showing 110w for each card no problem. How will you explain this? They are even undervolted now. |
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
April 06, 2017, 05:15:09 PM |
|
@Claymore, what does it mean? Which GPU? There are 6 ones. Why? ( I expect GPU5 because of the temperature, but...
Every GPU has two threads. |
|
|
|
miner582
Newbie
Offline
Activity: 41
Merit: 0
|
|
April 06, 2017, 05:29:09 PM |
|
Claymore,
-ethi values are from 0 to 8 and those negatives described on readme file?
Thanks
|
|
|
|
|
gondel
Legendary
Offline
Activity: 1946
Merit: 1005
|
|
April 06, 2017, 06:03:57 PM |
|
Hi guys, I am getting around 164 mh/s on eth and around 4900 on drc http://imgur.com/a/mDwd6I am with 6 470 cards and the power consumption is around 1200 w, is this normal? I overclocked the cards to 1250/2050, -100 mv with the trixx tool. Is there a way to reduce that consumption? Thanks! |
|
|
|
|
jeremyf327
Member
Offline
Activity: 79
Merit: 10
|
|
April 06, 2017, 06:04:23 PM |
|
All of my DCR shares are getting rejected using 9.0. I mine on supernova (dcr.suprnova.cc)...any idea why? It has been working fine with 8.1.
|
|
|
|
|
webbeast
Newbie
Offline
Activity: 7
Merit: 0
|
|
April 06, 2017, 06:16:53 PM |
|
All of my DCR shares are getting rejected using 9.0. I mine on supernova (dcr.suprnova.cc)...any idea why? It has been working fine with 8.1.
Happened to me when i first tried 9.0. It worked fine after second run. Also mining on dcr.supernova . Don't know what fixed it. Try messing with dcri a bit. |
|
|
|
|
|
fittsy
|
|
April 06, 2017, 06:34:24 PM |
|
All of my DCR shares are getting rejected using 9.0. I mine on supernova (dcr.suprnova.cc)...any idea why? It has been working fine with 8.1.
Try setting a low DCRI like 5 or 10 to start. Then use the + key to raise the dcr gradually. Or let it disconnect you and reconnect after 20s. It seems to run ok after that. You'll have a lot of rejected shares initially but when it reconnects it will start submitting shares properly. |
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
April 06, 2017, 06:49:34 PM |
|
All of my DCR shares are getting rejected using 9.0. I mine on supernova (dcr.suprnova.cc)...any idea why? It has been working fine with 8.1.
I believe this problem is related to this pool, sometimes it does not send response to auth message for some reason but still sends jobs, so miner mines but pool does not accept shares. Miner will reconnect automatically after 10-15 invalid shares, usually the pool accepts auth message at second attempt. |
|
|
|
|
MrJaekin
|
|
April 06, 2017, 06:56:02 PM |
|
Can't seem to get much over 24 MH/s on RX 480 Ref 8GB models when dual mining.. Changes ethi and dcri settings to no avail. Anyone want to share their settings? Thanks!
|
|
|
|
|
|
Apneal
|
|
April 06, 2017, 07:00:36 PM |
|
Claymore,
Will you be optimizing the Dual miner for the RX Vega once released to take advantage of the new architecture?
|
|
|
|
|
dallase
Member
Offline
Activity: 129
Merit: 10
|
|
April 06, 2017, 07:03:07 PM |
|
Hmm, i tested newest clyamore 9 on my RX470 and i see performance decreese from 171 to 167 MH  I will do more tests. OLD CLAYMORE 8.1 NEW CLAYMORE 9 What do you think guys about this ? Is it only numbers and real speed is the same or is it worse speed ?Worse speed due to driver. I already told him about the diff 470/480 in linux/windows, while 470 appears to perform better on linux, 480 does better on windows, that was only seen in his miner. Sgminer and Zawawa's GG did the same for 470s. That being said I think my 470s are now losing ~1MH and power usage is normal again. MSI Armor 470 4G Samsung memory: GPU3 28.685 Mh/s at 1126/2050 cl v9.0, GPU3 29.462 Mh/s same clocks v8.1, 28.7 GG v1.0-pre6 with asm enabled. All my rigs are ~0.75mh slower on new version, mining ETH only on Ubuntu 16.04 w/16.60 drivers. Claymore 8.1 - RX 470 4G
Screen #0
^[0;36mETH - Total Speed: 29.419 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:05
^[0;36mETH - Total Speed: 29.419 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:05
Screen #1
^[0;36mETH - Total Speed: 29.427 Mh/s, Total Shares: 4, Rejected: 0, Time: 00:05
^[0;36mETH - Total Speed: 29.419 Mh/s, Total Shares: 4, Rejected: 0, Time: 00:05
Claymore 9.0 - RX 470 4G
Screen #0
^[0;36mETH - Total Speed: 28.690 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:05
^[0;36mETH - Total Speed: 28.685 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:05
Screen #1
^[0;36mETH - Total Speed: 28.681 Mh/s, Total Shares: 4, Rejected: 0, Time: 00:05
^[0;36mETH - Total Speed: 28.692 Mh/s, Total Shares: 4, Rejected: 0, Time: 00:05
|
|
|
|
|
|
WhyMe
|
|
April 06, 2017, 07:31:04 PM |
|
My seasonic 750w gold kept up for the last week dual mining gpu-z showing 110w for each card. Now they are undervolted. You mean this is not good for longterm? Mind you i have 4 cards not 6.
Well ive been mining for a week with old settings dual mining gpu-z showing 110w for each card no problem. How will you explain this? They are even undervolted now.
gpuz power in not the same as wall power ! i've : 4*470 on ETH only, ~1075/1900 980mv , 750w at wall 4*470 on ETH+DCR, ~1150/2000 980mv, 850w at wall ( dcri 25 with v9.0, was 35 with v8.1 ) |
|
|
|
|
miner582
Newbie
Offline
Activity: 41
Merit: 0
|
|
April 06, 2017, 08:20:31 PM |
|
I have two rigs with claymore, same gpus. One on v8.1 and the other just upgrade yesterday to v9
v9:
ETH - Total Speed: 174.042 Mh/s, Total Shares: 103, Rejected: 0, Time: 00:49
ETH: GPU0 29.389 Mh/s, GPU1 29.708 Mh/s, GPU2 27.896 Mh/s, GPU3 29.097 Mh/s, GPU4 29.042 Mh/s, GPU5 28.911 Mh/s
ETH - Total Speed: 159.680 Mh/s, Total Shares: 103, Rejected: 0, Time: 00:50
ETH: GPU0 21.503 Mh/s, GPU1 29.725 Mh/s, GPU2 21.440 Mh/s, GPU3 29.055 Mh/s, GPU4 29.038 Mh/s, GPU5 28.919 Mh/s
ETH - Total Speed: 174.459 Mh/s, Total Shares: 103, Rejected: 0, Time: 00:50
ETH: GPU0 29.717 Mh/s, GPU1 29.702 Mh/s, GPU2 27.966 Mh/s, GPU3 29.059 Mh/s, GPU4 29.055 Mh/s, GPU5 28.960 Mh/s
ETH - Total Speed: 166.282 Mh/s, Total Shares: 105, Rejected: 0, Time: 00:51
ETH: GPU0 29.676 Mh/s, GPU1 21.482 Mh/s, GPU2 28.008 Mh/s, GPU3 29.090 Mh/s, GPU4 29.085 Mh/s, GPU5 28.941 Mh/s
ETH - Total Speed: 163.535 Mh/s, Total Shares: 110, Rejected: 0, Time: 00:54
ETH: GPU0 29.680 Mh/s, GPU1 21.475 Mh/s, GPU2 27.965 Mh/s, GPU3 26.511 Mh/s, GPU4 29.080 Mh/s, GPU5 28.823 Mh/s
Look how fluctuate, on v8.1 they are pretty stable only a few decimals of fluctuations. I am dual mining on linux -dcri 30. Is it a normal behaivor for v9?
|
|
|
|
|
jeremyf327
Member
Offline
Activity: 79
Merit: 10
|
|
April 06, 2017, 08:39:00 PM |
|
All of my DCR shares are getting rejected using 9.0. I mine on supernova (dcr.suprnova.cc)...any idea why? It has been working fine with 8.1.
Try setting a low DCRI like 5 or 10 to start. Then use the + key to raise the dcr gradually. Or let it disconnect you and reconnect after 20s. It seems to run ok after that. You'll have a lot of rejected shares initially but when it reconnects it will start submitting shares properly. Thanks guys...got it working. The DCRI thing worked. |
|
|
|
|
|
joaocha
|
|
April 06, 2017, 08:43:35 PM |
|
On 480 i got best value for SOLO dcri 7 , and for dual Mining Dcri 25
|
|
|
|
|
Balthazar
Legendary
Offline
Activity: 3108
Merit: 1358
|
|
April 06, 2017, 09:32:04 PM |
|
- A lot of minor improvements and bug fixes.
Hi there  It looks like there are still some minor issues with your implementation of NiceHash version of Ethereum stratum protocol. There is no eth_SubmitHashRate method in the NiceHash specification, but your program sends this request few times a minute. As the consequence, a lot of "Invalid stratum message" errors are being recorded in server's log file. |
|
|
|
|
|
fittsy
|
|
April 06, 2017, 09:45:55 PM |
|
I have two rigs with claymore, same gpus. One on v8.1 and the other just upgrade yesterday to v9
v9:
ETH - Total Speed: 174.042 Mh/s, Total Shares: 103, Rejected: 0, Time: 00:49
ETH: GPU0 29.389 Mh/s, GPU1 29.708 Mh/s, GPU2 27.896 Mh/s, GPU3 29.097 Mh/s, GPU4 29.042 Mh/s, GPU5 28.911 Mh/s
ETH - Total Speed: 159.680 Mh/s, Total Shares: 103, Rejected: 0, Time: 00:50
ETH: GPU0 21.503 Mh/s, GPU1 29.725 Mh/s, GPU2 21.440 Mh/s, GPU3 29.055 Mh/s, GPU4 29.038 Mh/s, GPU5 28.919 Mh/s
ETH - Total Speed: 174.459 Mh/s, Total Shares: 103, Rejected: 0, Time: 00:50
ETH: GPU0 29.717 Mh/s, GPU1 29.702 Mh/s, GPU2 27.966 Mh/s, GPU3 29.059 Mh/s, GPU4 29.055 Mh/s, GPU5 28.960 Mh/s
ETH - Total Speed: 166.282 Mh/s, Total Shares: 105, Rejected: 0, Time: 00:51
ETH: GPU0 29.676 Mh/s, GPU1 21.482 Mh/s, GPU2 28.008 Mh/s, GPU3 29.090 Mh/s, GPU4 29.085 Mh/s, GPU5 28.941 Mh/s
ETH - Total Speed: 163.535 Mh/s, Total Shares: 110, Rejected: 0, Time: 00:54
ETH: GPU0 29.680 Mh/s, GPU1 21.475 Mh/s, GPU2 27.965 Mh/s, GPU3 26.511 Mh/s, GPU4 29.080 Mh/s, GPU5 28.823 Mh/s
Look how fluctuate, on v8.1 they are pretty stable only a few decimals of fluctuations. I am dual mining on linux -dcri 30. Is it a normal behaivor for v9?
I believe that when card submits share the speed shows reduced temporarily immediately after. That's why you get fluctuations. |
|
|
|
|
