Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Stoukie]

I realise the whole 'luck' factor side of things but for a rig with 6 RX 580's @ 186 mh/s mining ETH on nanopool and 9300 mh/s mining on antminepool what would be an acceptable average shares per hour to be seeing within claymore v11?

I'm running 3 x RX580's, ETH on Nanopool at about 90.5 Mh/s (don't look at average over 6 hours I have been playing with my settings and rig was down for few minutes here and there), feel free to browse my shares per hour, range from 44 to 72:

https://eth.nanopool.org/account/0x38f9bb4df872ca8b2d5bfb398060d0c8fd85f005

Anyway, will give you an idea what 3 can do, not perfect but stable, no memory errors, no restarts

[djmuler]

Hey guys, i just finished to test the new version with different gpus and rigs like RX 470 4GB, RX 580 4GB / 8GB, GTX 1060 3GB / 6GB, GTX 1070, GTX 1080 Ti

Here are my results so far:

RX 470 4GB Ethereum 30 Mh/s – Verge (blake2s) 1,200 Mh/s / Ethereum 30 Mh/s – Smartcash (keccak) 150 Mh/s
RX 580 8GB Ethereum 31.2 Mh/s – Verge (blake2s) 1,550 Mh/s / Ethereum 31.2 Mh/s – Smartcash (keccak) 215 Mh/s
RX 580 4GB Ethereum 31.2 Mh/s – Verge (blake2s) 1,560 Mh/s / Ethereum 31.2 Mh/s – Smartcash (keccak) 218 Mh/s

GTX 1060 3GB Ethereum 22.5 – 18.8 Mh/s – Verge (blake2s) 500 – 600 Mh/s / Ethereum 22.5 – 18.8 Mh/s – Smartcash (keccak) 100 Mh/s
GTX 1060 6GB Ethereum 23.4 – 18.8 Mh/s – Verge (blake2s) 234 Mh/s / Ethereum 22 – 18.8 Mh/s – Smartcash (keccak) 51.5 Mh/s
GTX 1070 8GB Ethereum 31.3 – 18.8 Mh/s – Verge (blake2s) 520 Mh/s / Ethereum 30.3 – 18.8 Mh/s – Smartcash (keccak) 90.5 Mh/s
GTX 1080 Ti 11GB Ethereum 34.7 Mh/s – Verge (blake2s) 695 Mh/s / Ethereum 34.5 – Smartcash (keccak) 103 Mh/s

More detailed results and configs: http://1stminingrig.com/use-new-claymores-dual-ethereum-gpu-miner-v11-0-blake2s-keccak-algorithms/

Hope it helps!

Thx for your awesome posts in your amazing blog

[Chiko.Chavez]

I realise the whole 'luck' factor side of things but for a rig with 6 RX 580's @ 186 mh/s mining ETH on nanopool and 9300 mh/s mining on antminepool what would be an acceptable average shares per hour to be seeing within claymore v11?

I'm running 3 x RX580's, ETH on Nanopool at about 90.5 Mh/s (don't look at average over 6 hours I have been playing with my settings and rig was down for few minutes here and there), feel free to browse my shares per hour, range from 44 to 72:

https://eth.nanopool.org/account/0x38f9bb4df872ca8b2d5bfb398060d0c8fd85f005

Anyway, will give you an idea what 3 can do, not perfect but stable, no memory errors, no restarts

I get pretty much double, good to have some stats to go by. Thanks for your help.

[strelly83]

Hi, someone using blake2s with the NiceHash pool? since yesterday the server seems down and I miss very little to get to the minimum balance to make a withdrawal...
Wich other currency on nicehash is it possible to dig with profit?

[mine_phun]

Hello all,

I have not been active here lately and been to busy fixing the problems NLpool, it took a huge amount of time.

We finally managed to bring our new hardware online together with DDOS protection.

Would you guys give us a second try please? .. I will keep the fee at 0% until the end of March. After that it will be 0.5%.

For XVG Verge with Blake2s you can use : -o stratum+tcp://mine.nlpool.nl:5766 -dwal <WALLET_ADDRESS> -dpsw c=XVG
For Shieldcoin with Blake2s you can use : -o stratum+tcp://mine.nlpool.nl:5766 -dwal <WALLET_ADDRESS> -dpsw c=XSH

Especially for the people in Holland or near Holland this pool should be nice... it brings low latency and thus less stales, so more shares and profit.

Contact information / settings can be found on our website www.nlpool.nl

[mshordja]

Hello all,

I have not been active here lately and been to busy fixing the problems NLpool, it took a huge amount of time.

We finally managed to bring our new hardware online together with DDOS protection.

Would you guys give us a second try please? .. I will keep the fee at 0% until the end of March. After that it will be 0.5%.

For XVG Verge with Blake2s you can use : -o stratum+tcp://mine.nlpool.nl:5766 -dwal <WALLET_ADDRESS> -dpsw c=XVG
For Shieldcoin with Blake2s you can use : -o stratum+tcp://mine.nlpool.nl:5766 -dwal <WALLET_ADDRESS> -dpsw c=XSH

Especially for the people in Holland or near Holland this pool should be nice... it brings low latency and thus less stales, so more shares and profit.

Contact information / settings can be found on our website www.nlpool.nl

now are you sure u fix everything, last time i try was a nightmare, i have 6 rigs with 12cards and i don't want to lose again all the hash

[mine_phun]

Hello all,

I have not been active here lately and been to busy fixing the problems NLpool, it took a huge amount of time.

We finally managed to bring our new hardware online together with DDOS protection.

Would you guys give us a second try please? .. I will keep the fee at 0% until the end of March. After that it will be 0.5%.

For XVG Verge with Blake2s you can use : -o stratum+tcp://mine.nlpool.nl:5766 -dwal <WALLET_ADDRESS> -dpsw c=XVG
For Shieldcoin with Blake2s you can use : -o stratum+tcp://mine.nlpool.nl:5766 -dwal <WALLET_ADDRESS> -dpsw c=XSH

Especially for the people in Holland or near Holland this pool should be nice... it brings low latency and thus less stales, so more shares and profit.

Contact information / settings can be found on our website www.nlpool.nl

now are you sure u fix everything, last time i try was a nightmare, i have 6 rigs with 12cards and i don't want to lose again all the hash

Yes.... as far as Warranty's go against DDOS we should be protected as maximum as possible ... so i just hope we can have this baby fly now....

[victoriuss]

Hello all,

I have not been active here lately and been to busy fixing the problems NLpool, it took a huge amount of time.

We finally managed to bring our new hardware online together with DDOS protection.

Would you guys give us a second try please? .. I will keep the fee at 0% until the end of March. After that it will be 0.5%.

For XVG Verge with Blake2s you can use : -o stratum+tcp://mine.nlpool.nl:5766 -dwal <WALLET_ADDRESS> -dpsw c=XVG
For Shieldcoin with Blake2s you can use : -o stratum+tcp://mine.nlpool.nl:5766 -dwal <WALLET_ADDRESS> -dpsw c=XSH

Especially for the people in Holland or near Holland this pool should be nice... it brings low latency and thus less stales, so more shares and profit.

Contact information / settings can be found on our website www.nlpool.nl

now are you sure u fix everything, last time i try was a nightmare, i have 6 rigs with 12cards and i don't want to lose again all the hash

I'm trying the pool now as well....what I can say is that he paid back what I had in my balance when it disappeared. pretty rare if you ask me.

[leonix007]

Hi All!

Recently upgrade my test rig to v11 but having issues with the following error currently running previous version across 14 cards without issue.

Error happens with solo & dual mining

Test rig card is a MSI RX470 8GB

GPU0 t=62C fan=89%
em hbt: 0, fm hbt: 78,
watchdog - thread 0 (gpu0), hb time 78
watchdog - thread 1 (gpu0), hb time 16
WATCHDOG: GPU error, you need to restart miner
Quit, please wait...
Restarting OK, exit...

Any suggestions as to what could be the issue?

Thanks.

is this a modded card? what is your clock settings? try to put/install GPU on PCIe x16 slot for the meantime since its a single test GPU card only, and try default clocks.

[Ursul0]

Let me answer my own question

This version is POOL/SOLO for Ethereum, POOL for Decred, POOL/SOLO for Siacoin, POOL for Lbry, POOL for Pascal, POOL for Blake2s, POOL for Keccak.

So, Mr.Claymore is SOLO for Blake2s/Keccak a possibility?

Sorry for quoting myself, but I think many of us in here would like to know if there is a possibility in the future to mine SOLO Blake2s/Keccak, or if it is completely out of the picture

I'd presume you will still need to do eth, but may try to set the lowest available intensity(+maybe set slower mem to increase stability... dunno) and highest dcri available

[peterboy1]

@mine_phun

guru meditation

edit:

nevermind, its my connection

[kkourmousis]

Let me answer my own question

This version is POOL/SOLO for Ethereum, POOL for Decred, POOL/SOLO for Siacoin, POOL for Lbry, POOL for Pascal, POOL for Blake2s, POOL for Keccak.

So, Mr.Claymore is SOLO for Blake2s/Keccak a possibility?

Sorry for quoting myself, but I think many of us in here would like to know if there is a possibility in the future to mine SOLO Blake2s/Keccak, or if it is completely out of the picture

I'd presume you will still need to do eth, but may try to set the lowest available intensity(+maybe set slower mem to increase stability... dunno) and highest dcri available

POOL ETH + SOLO XVG is what I would like to know if it is possible to see in the future

[Ratledge]

hi dev
How to don't load dag?

You can't. It would be so inefficient nobody would ever make a bitpenny.

The whole point is to be efficient, and if the DAG isn't completely stored in memory the program would run so slow it would be useless.

[Amstellodamois]

What's the maximum -ethi value? Would be nice to include it in the readme.
Maybe change it on the go like -dcri?

[ollis miner]

Hello all,

I have not been active here lately and been to busy fixing the problems NLpool, it took a huge amount of time.

We finally managed to bring our new hardware online together with DDOS protection.

Would you guys give us a second try please? .. I will keep the fee at 0% until the end of March. After that it will be 0.5%.

For XVG Verge with Blake2s you can use : -o stratum+tcp://mine.nlpool.nl:5766 -dwal <WALLET_ADDRESS> -dpsw c=XVG
For Shieldcoin with Blake2s you can use : -o stratum+tcp://mine.nlpool.nl:5766 -dwal <WALLET_ADDRESS> -dpsw c=XSH

Especially for the people in Holland or near Holland this pool should be nice... it brings low latency and thus less stales, so more shares and profit.

Contact information / settings can be found on our website www.nlpool.nl

Hi @mine_phun

I just connected again - giving it another try with one of my rigs.
Better to report if you still have issues in advance, than later...

Best of luck!

Ollis

[muzuca]

i have question for
GPU FAN

in conf
-tt 56
-fanmin 20
-fanmax 80

but sometime i get info for all gpu .. 0 1 2 in miner
and often only gpu0 so miner only gpu0 is controling



bug or im doing someting wrong?

I never saw this situation in my rigs, probably is a bug. Try to open and close the miner 2-3 times to fix the right config.

[muzuca]

Hello all,

I have not been active here lately and been to busy fixing the problems NLpool, it took a huge amount of time.

We finally managed to bring our new hardware online together with DDOS protection.

Would you guys give us a second try please? .. I will keep the fee at 0% until the end of March. After that it will be 0.5%.

For XVG Verge with Blake2s you can use : -o stratum+tcp://mine.nlpool.nl:5766 -dwal <WALLET_ADDRESS> -dpsw c=XVG
For Shieldcoin with Blake2s you can use : -o stratum+tcp://mine.nlpool.nl:5766 -dwal <WALLET_ADDRESS> -dpsw c=XSH

Especially for the people in Holland or near Holland this pool should be nice... it brings low latency and thus less stales, so more shares and profit.

Contact information / settings can be found on our website www.nlpool.nl

I was using and I liked, until the issues. I will try it again for sure, as I don't like the other options that we have for verge pool.

[cryptoillusion1]

i have question for
GPU FAN

in conf
-tt 56
-fanmin 20
-fanmax 80

but sometime i get info for all gpu .. 0 1 2 in miner
and often only gpu0 so miner only gpu0 is controling

bug or im doing someting wrong?

I never saw this situation in my rigs, probably is a bug. Try to open and close the miner 2-3 times to fix the right config.

Are you connecting using remote desktop ? I have had this issue when connecting with Remote desktop.
Connect directly to monitor or use team viewer

[peterboy1]

What's the maximum -ethi value? Would be nice to include it in the readme.
Maybe change it on the go like -dcri?

@Claymore

I support this. setting -ethi runtime is a nice feature.

[Ratledge]

What's the maximum -ethi value? Would be nice to include it in the readme.
Maybe change it on the go like -dcri?

It is in there. It takes some searching to find, but it is 16, and if you try a higher number the error message is not that obvious - and it is ignored.