Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[goodbitprofit]

Another question guys
after many tests for ETH+XVG mining with these settings

Code:

-cclock 1250,1250,1250,1250,1250,1280,1250,1250,1250,1250 -mclock 2210,2210,2070,2210,2210,2140,2210,2210,2210,2210 -cvddc 890,890,910,890,890,920,890,910,890,890 -mvddc 930 -dcri 49 -ethi 16 -ftime 5 -mport 0

i am getting best results without reducing ETH mining performance (at least i think soo)

I tried mining ETH+SmartCash with the same settings , onlu used dcri  7 instead of 49

Code:

-cclock 1250,1250,1250,1250,1250,1280,1250,1250,1250,1250 -mclock 2210,2210,2070,2210,2210,2140,2210,2210,2210,2210 -cvddc 890,890,910,890,890,920,890,910,890,890 -mvddc 930 -dcri 7 -ethi 16 -ftime 5 -mport 0

but now  ETH performance redused - i am getting about 10% less ETH shares.
What would you suggest to change for ETH+SmartCash mining - more cclock/mclock/mvddc/cvddc?
Is ETH+keccak more core or memory intensive than ETH+XVG
Thanks

Hehe, I was also tried all day, and on final when 1 rig start ridicules behavior I just give up from dual, problem with pools, connections, blocks,...
Yes, Hash for ETC its 110%

[1714828792]

1714828792

[1714828792]

1714828792

[1714828792]

1714828792

[1714828792]

1714828792

[mikekale]

This is a little embarrassing but I have tried everything but cannot get v11 to work. I copied over my .bat file and for some reason the miner keeps picking a monero pool. I have tried the -epool but it comes up as a wrong unknown option. I am about to rip my hair out!

DON'T do any "bat files". put all your options into config.txt and delete dpools and epools .txt and run the executable without any parameters

Just tried that.

this is my parameters in the config.txt

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:14444 -ewal WALLET -epsw x -allpools 1 -cvddc 850,875,880 -cclock 1150,1190,1190 -mclock 2120,2045,2120 -mvddc 880,890,890 -ethi 16


and for every line it says unknown option


What am I doing wrong??

In your config.txt just put commands one lne at a time example
-epool
-ewal
Than in start.bat you put

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe

Thanks for your reply. I did exactly what you said.

When I started the miner it took the setx parameters but then the same problem

Unknown option -epool
Unknown option -ewal
^^^^^^^^  continued for every parameter in the config file
XMR: no pool specified


I downloaded this claymore v11 from the first page of the thread.

[JUPIE2008]

Hey Guys

I am using  Claymore with hiveos and in the second coin box there are a few options ......firstly it was ETH/Sia  but  then we got a msg saying the SIA  diff went up 10X due to the release of ASICS.......could somebody please save me the almost  impossible task  of trying to figure this out myself.

Options are siacoin, decred,pascal,lbry,blake2s and keccak. What would be the best option to mine in dual mode if i wanted to ...... please could somebody help here. Could i use any coin in the algo group and if i could please post an example of a string as im not very PC litereate

 thx in advance

JUPIE

[Maraco]

v11.0:

- added new algorithm for dual mode: blake2s (stratum pools only), use "-dcoin blake2s" option.
- added new algorithm for dual mode: keccak (stratum pools only), use "-dcoin keccak" option.
- reduced devfee for dual mode, now it is 1.5%.
- for 2GB cards devfee is removed completely, i.e. on 2GB cards you can mine all ETH forks without devfee. Check Readme for details.
- added "-tstart" option.
- "-asm 2" option value now supports Tahiti, Tonga, Ellesmere, Baffin; in some cases it can be a bit faster in ETH-only mode.
- removed "-allcoins exp" option value.
- a few minor bug fixes and improvements.

Hi Claymore, ¿Is still needed to download this driver from AMD (Radeon Software Crimson ReLive Edition Beta for [Suspicious link removed]pute Driver for Windows® 10) in order to recover hashrate because DAG file problem?

[cryptoillusion1]

This is a little embarrassing but I have tried everything but cannot get v11 to work. I copied over my .bat file and for some reason the miner keeps picking a monero pool. I have tried the -epool but it comes up as a wrong unknown option. I am about to rip my hair out!

DON'T do any "bat files". put all your options into config.txt and delete dpools and epools .txt and run the executable without any parameters

Just tried that.

this is my parameters in the config.txt

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:14444 -ewal WALLET -epsw x -allpools 1 -cvddc 850,875,880 -cclock 1150,1190,1190 -mclock 2120,2045,2120 -mvddc 880,890,890 -ethi 16


and for every line it says unknown option


What am I doing wrong??

In your config.txt just put commands one lne at a time example
-epool
-ewal
Than in start.bat you put

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe

Thanks for your reply. I did exactly what you said.

When I started the miner it took the setx parameters but then the same problem

Unknown option -epool
Unknown option -ewal
^^^^^^^^  continued for every parameter in the config file
XMR: no pool specified


I downloaded this claymore v11 from the first page of the thread.

try adding -mode 1

EthDcrMiner64.exe -epool us1.ethermine.org:14444 -ewal WALLET -epsw x -allpools 1 -cvddc 850,875,880 -cclock 1150,1190,1190 -mclock 2120,2045,2120 -mvddc 880,890,890 -ethi 16 -mode 1

[Lamsterpaul]

What i should set the on the -ethi switch for ETH ?
Leave it on default 8 or should i set it to 16 ?
Rigs are all stabil, will i get more shares, if I set it on 16 ? And how much I can go up ?

[Ratledge]

What i should set the on the -ethi switch for ETH ?
Leave it on default 8 or should i set it to 16 ?
Rigs are all stabil, will i get more shares, if I set it on 16 ? And how much I can go up ?

16 is the limit for ETH Intensity.

[alex_85]

Yes, Hash for ETC its 110%

Didnt understand that?

[goodbitprofit]

Yes, Hash for ETC its 110%

Didnt understand that?

Just try with mode 1 and you will see 

[alex_85]

Just try with mode 1 and you will see 

I got you now, so i cant compensate the ETH hash drop with little bit more core/memory/voltage increase/decrease?
Anybody with experience who solved that?

[sundownz]

i feel i am late to the party because the last time i saw this thread was when claymore posted about the new version but i was inactive then..

can some kind person bring me upto speed please? so which coins are you guys mining with the new algo for dual.

For the blakes2 and keccak i see only few coins. are any of those profitable or like the posts i am reading just above about xvg.. which is like multiple algo thing better?

Thankyou

Imo best option is ethash + blake2s. My rx470 gives something like 28Mh/s + 1300Mh/s and other cool stuff is reduced fee.

Sounds like I need to tweak my Blake2s settings... seeing about half that on RX570 (no BIOS mode, though). Can you share what settings you have for the Blake2s side ?

Cranked my DCRI up to 70... now getting ~1500 MH/S on B2S with no impact on ETH mining. Awesome.

[Marvell2]

I dont think claymore is set up for blake2 solo mining, it works with cc miner but not with claymore

pools are shit claymore some have not paid in days , need to be able to solo mine blake or dual mining is over for me again

I think the isue is with the dwal and dpass settings

Code:

14:43:25:330	10e0	b501 
14:43:25:533	10e0	ETH: 1 pool is specified
14:43:25:533	10e0	Main Ethereum pool is us1.ethermine.org:4444
14:43:25:533	10e0	B2S: 1 pool is specified
14:43:25:533	10e0	Main Blake2s pool is 127.0.0.1:20102
14:43:26:111	10e0	OpenCL platform: NVIDIA CUDA
14:43:26:111	10e0	AMD OpenCL platform not found 
14:43:26:877	10e0	CUDA initializing...

14:43:26:877	10e0	NVIDIA Cards available: 6 
14:43:26:877	10e0	CUDA Driver Version/Runtime Version: 8.0/8.0
14:43:26:908	10e0	GPU #0: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 1:0:0)

14:43:26:908	10e0	GPU #1: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 2:0:0)

14:43:26:908	10e0	GPU #2: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 3:0:0)

14:43:26:908	10e0	GPU #3: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 4:0:0)

14:43:26:924	10e0	GPU #4: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 5:0:0)

14:43:26:924	10e0	GPU #5: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 6:0:0)

14:43:26:924	10e0	Total cards: 6 
14:43:30:596	10e0	No AMD cards in the list, ADL library will not be used.
14:43:30:596	10e0	NVML version: 8.381.65
14:43:31:877	a34	ETH: Stratum - connecting to 'us1.ethermine.org' <18.219.59.155> port 4444
14:43:31:924	a34	send: {"id":2,"jsonrpc":"2.0","method":"eth_login","params":["0xa57EeFabb76Bfd1E9E6ee606999b76BD123aFe32.MARVELL9-89","x"]}

14:43:31:924	a34	ETH: Stratum - Connected (us1.ethermine.org:4444)
14:43:31:955	10e0	DUAL MINING MODE ENABLED: ETHEREUM+BLAKE2S
14:43:31:955	1a80	 B2S - connecting to 127.0.0.1:20102
14:43:31:955	1a80	http send request: {"method": "getwork", "params": [], "id":0}
14:43:31:955	10e0	ETH: qtminer stratum mode
14:43:31:955	10e0	Watchdog enabled
14:43:31:955	10e0	Remote management (READ-ONLY MODE) is enabled on port 3333
14:43:31:955	10e0	
14:43:31:955	1a80	http got answer: {"result":{"midstate":"4b4ca5b70fe11a788c9a7e1683c79bedc0857f7a29a03ecf48867e76532570d6","data":"00002004e1a44afa310dbe3ac649117f51a9ee11f687cf0efb500d4e1dc3b86ebb0820c380f21040ad34b4f8e27020a652ad68ccd5677957e0870f6c6f1c0ebaefd959c45a8f381c1a0292fd00000000000000800000000000000000000000000000000000000000000000000000000000000000000000000000000080020000","hash1":"00000000000000000000000000000000000000000000000000000000000000000000008000000000000000000000000000000000000000000000000000010000","target":"0000000000000000000000000000000000000000000000fd9202000000000000"},"error":null,"id":0}

14:43:31:955	1a80	 B2S: Connected (127.0.0.1:20102)
14:43:31:955	1a80	DCR: Unknown answer from server: {"result":{"midstate":"4b4ca5b70fe11a788c9a7e1683c79bedc0857f7a29a03ecf48867e76532570d6","data":"00002004e1a44afa310dbe3ac649117f51a9ee11f687cf0efb500d4e1dc3b86ebb0820c380f21040ad34b4f8e27020a652ad68ccd5677957e0870f6c6f1c0ebaefd959c45a8f381c1a0292fd00000000000000800000000000000000000000000000000000000000000000000000000000000000000000000000000080020000","hash1":"00000000000000000000000000000000000000000000000000000000000000000000008000000000000000000000000000000000000000000000000000010000","target":"0000000000000000000000000000000000000000000000fd9202000000000000"},"error":null,"id":0}

14:43:31:987	a34	got 39 bytes
14:43:31:987	a34	buf: {"id":2,"jsonrpc":"2.0","result":true}

14:43:31:987	a34	parse packet: 38
14:43:31:987	a34	ETH: Authorized
14:43:31:987	a34	send: {"id":3,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

14:43:31:987	a34	new buf size: 0
14:43:32:033	a34	got 248 bytes
14:43:32:033	a34	buf: {"id":3,"jsonrpc":"2.0","result":["0xca535617a2283e08e1b03e3d2333942b6091a529fc81b802d435550d093e4c04","0xa9b0e0c9aca72c07ba06b5bbdae8b8f69e61878301508473379bb4f71807d707","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4e67b1"]}

14:43:32:033	a34	parse packet: 247
14:43:32:033	a34	ETH: job changed
14:43:32:033	a34	new buf size: 0
14:43:32:112	2b0	Setting DAG epoch #171...
14:43:38:534	a34	got 248 bytes
14:43:38:534	a34	buf: {"id":0,"jsonrpc":"2.0","result":["0xf887d617331d2e86aec61117300fdc953cad667a67754ced31212195030d23c7","0xa9b0e0c9aca72c07ba06b5bbdae8b8f69e61878301508473379bb4f71807d707","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4e67b2"]}

14:43:38:534	a34	parse packet: 247
14:43:38:534	a34	ETH: job changed
14:43:38:534	a34	new buf size: 0
14:43:38:534	a34	ETH: 02/22/18-14:43:38 - New job from us1.ethermine.org:4444
14:43:38:534	a34	target: 0x0000000112e0be82 (diff: 4000MH), epoch 171(2.34GB)
14:43:38:534	a34	ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
14:43:38:534	1a80	http send request: {"method": "getwork", "params": [], "id":0}
14:43:38:534	a34	ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
14:43:38:534	a34	 B2S - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
14:43:38:534	1a80	http got answer: {"result":{"midstate":"2291362a06eb01431c98d4cb71ab29d07c64151db78d6d096ab922a17ad419d6","data":"00002004e1a44afa310dbe3ac649117f51a9ee11f687cf0efb500d4e1dc3b86ebb0820c3e66ef41b5ae10cfe070414e4b547e03b6fb717a4748c6e04a37a246a55c412e65a8f381c1a0292fd00000000000000800000000000000000000000000000000000000000000000000000000000000000000000000000000080020000","hash1":"00000000000000000000000000000000000000000000000000000000000000000000008000000000000000000000000000000000000000000000000000010000","target":"0000000000000000000000000000000000000000000000fd9202000000000000"},"error":null,"id":0}

14:43:38:534	1a80	DCR: Unknown answer from server: {"result":{"midstate":"2291362a06eb01431c98d4cb71ab29d07c64151db78d6d096ab922a17ad419d6","data":"00002004e1a44afa310dbe3ac649117f51a9ee11f687cf0efb500d4e1dc3b86ebb0820c3e66ef41b5ae10cfe070414e4b547e03b6fb717a4748c6e04a37a246a55c412e65a8f381c1a0292fd00000000000000800000000000000000000000000000000000000000000000000000000000000000000000000000000080020000","hash1":"00000000000000000000000000000000000000000000000000000000000000000000008000000000000000000000000000000000000000000000000000010000","target":"0000000000000000000000000000000000000000000000fd9202000000000000"},"error":null,"id":0}

14:43:38:550	a34	 B2S: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s

getting unknow midstate error when connecting to the verge qt wallet rpc port

14:43:38:534   1a80   DCR: Unknown answer from server: {"result":{"midstate":"2291362a06eb01431c98d4cb71ab29d07c64151db78d6d096ab922a17ad419d6","data":"00002004e1a44afa310dbe3ac649117f51a9ee11f687cf0efb500d4e1dc3b86ebb0820c3e66ef41 b5ae10cfe070414e4b547e03b6fb717a4748c6e04a37a246a55c412e65a8f381c1a0292fd000000 0000000080000000000000000000000000000000000000000000000000000000000000000000000 0000000000080020000","hash1":"0000000000000000000000000000000000000000000000000000000000000000000000800000000 0000000000000000000000000000000000000000000010000","target":"0000000000000000000000000000000000000000000000fd9202000000000000"},"error":null,"id":0}

[Ratledge]

Just try with mode 1 and you will see 

I got you now, so i cant compensate the ETH hash drop with little bit more core/memory/voltage increase/decrease?
Anybody with experience who solved that?

Depends on what cards you have, of course.  If nVidia, try power limit around 65-75%, and around that.  For me, 70% seems to be the sweet spot and keeps my temps down, also.

[alex_85]

Depends on what cards you have, of course.  If nVidia, try power limit around 65-75%, and around that.  For me, 70% seems to be the sweet spot and keeps my temps down, also.

Thanks for your answer, i am with RX580 Nitro + 8GB cards .

[WhackOBill]

Hello Guys
Can you help me configure the command line for Claymore 11 in order
To mine Ethereum ( MPH ) + Blake2s ( AhashPool )
Is there a way to make it work ?

EthDcrMiner64.exe -epool europe.ethash-hub.miningpoolhub.com:20535 -ewal 999.clay -epsw clay -dpool stratum+tcp://blake2s.mine.ahashpool.com:5766 -dwal ****mXHJK3WDL15vFbD73VECT84N*** -dpsw x -dcoin blake2s -eworker LAD3ATI560,c=BTC -allpools 1

The problem is that i need to specify a currency for example: ID=Rig01,c=BTC

Thanks

The Rig and Currency strings go in the -dpsw parameter, not the -eworker parameter.  Instead of "-dpsw x", you should have "-dpsw ID=Rig01,c=BTC".  It's right there on the ahashpool site's main page.

[andyg75]

I've set up keccak on a YIIMP pool. With pool difficulty set at 1024 (the same setting that the official SmartCash pools use), ccminer was getting about 50% bad shares due to low difficulty. We found the batch file has to use the "-m 2" switch to multiply the difficulty, or manually set difficulty higher to resolve this problem. Setting the pool difficulty to 2048 did not help.

People are having problems dual-mining ETH and SMART due to this 50% bad shares due to low difficulty issue. I can't find a difficulty multiplier param or difficulty modification param for Claymore miner. Does something like this exist?

Anyone know what might help me fix this problem on the pool?

Thanks

Difficulty is a pool related setting. You can decrease Claymore intensity (there is a parameter for that), or try tuning -dcri. However I doubt this is your goal here...

yes, totally understood. as i mentioned adjusting pool difficulty didn't affect the issue. Some miners (most ccminer builds for example) have params to adjust miner difficulty either by hard setting it or by multiplying it. I was curious if claymore had those same params under a different name but it seems not.

also i don't suppose anyone has managed to get a working keccak pool on yiimp?

[Ratledge]

Depends on what cards you have, of course.  If nVidia, try power limit around 65-75%, and around that.  For me, 70% seems to be the sweet spot and keeps my temps down, also.

Thanks for your answer, i am with RX580 Nitro + 8GB cards .

My Nitro+ (8gb) prefers to be undervolted.  Each card is it's own microcosm, I have never found generic answers for RX 580's.  Even my Asus RX 580 is very different.

[FFI2013]

This is a little embarrassing but I have tried everything but cannot get v11 to work. I copied over my .bat file and for some reason the miner keeps picking a monero pool. I have tried the -epool but it comes up as a wrong unknown option. I am about to rip my hair out!

DON'T do any "bat files". put all your options into config.txt and delete dpools and epools .txt and run the executable without any parameters

Just tried that.

this is my parameters in the config.txt

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:14444 -ewal WALLET -epsw x -allpools 1 -cvddc 850,875,880 -cclock 1150,1190,1190 -mclock 2120,2045,2120 -mvddc 880,890,890 -ethi 16


and for every line it says unknown option


What am I doing wrong??

In your config.txt just put commands one lne at a time example
-epool
-ewal
Than in start.bat you put

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe

Thanks for your reply. I did exactly what you said.

When I started the miner it took the setx parameters but then the same problem

Unknown option -epool
Unknown option -ewal
^^^^^^^^  continued for every parameter in the config file
XMR: no pool specified


I downloaded this claymore v11 from the first page of the thread.

you said xmr no pool specified are you trying to mine xmr this is eth miner not xmr if you trying to mine anything else besides a eth or eth clone coin it won't work you need the claymores cryptonote miner

[alex_85]

My Nitro+ (8gb) prefers to be undervolted.  Each card is it's own microcosm, I have never found generic answers for RX 580's.  Even my Asus RX 580 is very different.

Well, i undervolted with 10 (870) and decreased dcri -1 (currently at -dcri 6) Eth hash now increased a little bit but keccak decreased which is normal. Seems like dcri setting is 6 for me .
I would like to ask if 870 mv core voltage at 1250 is safe for dual ETH=keccak on RX580 8GB, micron memory and 920mv safe for memory voltage at 2220.
Is it safe to go any lower for voltages to save some more power?

@Ratledge, could you share your .bat if you dual mine eth=keccak on rx580

[ciprianpt]

Hey guys, i just finished to test the new version with different gpus and rigs like RX 470 4GB, RX 580 4GB / 8GB, GTX 1060 3GB / 6GB, GTX 1070, GTX 1080 Ti

Here are my results so far:

RX 470 4GB Ethereum 30 Mh/s – Verge (blake2s) 1,200 Mh/s / Ethereum 30 Mh/s – Smartcash (keccak) 150 Mh/s
RX 580 8GB Ethereum 31.2 Mh/s – Verge (blake2s) 1,550 Mh/s / Ethereum 31.2 Mh/s – Smartcash (keccak) 215 Mh/s
RX 580 4GB Ethereum 31.2 Mh/s – Verge (blake2s) 1,560 Mh/s / Ethereum 31.2 Mh/s – Smartcash (keccak) 218 Mh/s

GTX 1060 3GB Ethereum 22.5 – 18.8 Mh/s – Verge (blake2s) 500 – 600 Mh/s / Ethereum 22.5 – 18.8 Mh/s – Smartcash (keccak) 100 Mh/s
GTX 1060 6GB Ethereum 23.4 – 18.8 Mh/s – Verge (blake2s) 234 Mh/s / Ethereum 22 – 18.8 Mh/s – Smartcash (keccak) 51.5 Mh/s
GTX 1070 8GB Ethereum 31.3 – 18.8 Mh/s – Verge (blake2s) 520 Mh/s / Ethereum 30.3 – 18.8 Mh/s – Smartcash (keccak) 90.5 Mh/s
GTX 1080 Ti 11GB Ethereum 34.7 Mh/s – Verge (blake2s) 695 Mh/s / Ethereum 34.5 – Smartcash (keccak) 103 Mh/s

More detailed results and configs: http://1stminingrig.com/use-new-claymores-dual-ethereum-gpu-miner-v11-0-blake2s-keccak-algorithms/

Hope it helps!