Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Bael]

Hi

I am trying to use the new ssl:// option but it is not configured.

How should I configure the .bat file to activate it on ethermine.org?

Greetings guys!

[1714145247]

1714145247

[1714145247]

1714145247

[Mathero11]

Does anyone have or has had this issue?

ETH: Stratum - connecting to 'eth-us-east1.nanopool.org' <192.99.69.170> port 9999 (unsecure)
ETH: Stratum - Cannot connect to eth-us-east1.nanopool.org:9999
ETH: Stratum - Failed to connect, retry in 20 sec...

I have internet as I can remotely log in my computer or browse the internet, but I cannot mine.

yes I had this problem myself. use Google's DNS server. it's 8.8.8.8 and 8.8.4.4

[wild_kartman]

Hi

I am trying to use the new ssl:// option but it is not configured.

How should I configure the .bat file to activate it on ethermine.org?

Greetings guys!

-epool ssl://eu1.ethermine.org:5555

[mohieddine]

it's good   

[nazarpechka]

http://xvgminingclub.info pool (blake2s verge) moved to new dedicated server.
Current features:
-low fee
-server in Germany, low latency in Europe
-one of the biggest pools among ones that do not steal
-stable hash and payout (now REALLY stable )
-cool community in Telegram
Thanks 

[Bael]

Hi

I am trying to use the new ssl:// option but it is not configured.

How should I configure the .bat file to activate it on ethermine.org?

Greetings guys!

-epool ssl://eu1.ethermine.org:5555

Thank you!!

I had passed the port : )

[WhackOBill]

Dear @Mine_Phun, NLPool.NL seems to be clipping along well since the hardware upgrade.  I see there are nearly 1000 Verge miners on it now.

I think there's some confusion on the payout increments and you may be able to clear up some of this by editing your Home page.  You list the min payouts as 0.001 and 0.0001, the second I assume is on Sundays.   I think you mean to express that these are in BTC equivalents and not in XVG.

On the miner page for specific accounts, I see that you DO list the wallet payout increment but I'm not sure everyone has seen this.  Also, it seems that the wallet pays out under this amount on Sundays as one might expect just to clear out accounts.

Perhaps you can clarify.  Still, seems to be running very well since the re-build / upgrade.  My payments are processing just fine but I've seen some comments that lead me to believe there is confusion.

[IncludeBeer]

Having an issue...I just decided to add my 280x to my rig. Now it has 3x 480x and 1x 280x. Before, I was getting ~25mh from each card. Now with the 280x, I'm only getting ~7mh each, and ~6 from the 280x. Is there something I need to change in my config? Or, how to limit which gpus to use? Thanks

My config:

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-us.dwarfpool.com:8008 -ewal 0x1f9b145fdaef2b82aef29c2f3c9b875a8b017512 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal SantasNotReal.MiningRig -dpsw x -dcri 43 -dbg -1 -tt 1

[snippler]

Hi guys, my rig keeps going offline. On restart I see the following

dev/sda2: recovering journal
dev/sda2: clean, 127903/436320 files, number number blocks
Created slice user Slice of miner
Starting user manager for uid 1000
Started session 7 of user miner
Stopping user manager for uid 1000
A slice job is running for raise network (4min/5min3s)
Repeat repeat until time reaches 5 min

Some Claymore Miner information

Cannot resolve 'eth-eu2.nanopool.org'
ETH: Stratum - Cannot connect to eth-eu2.nanopool.org:9999
ETH: Stratum - Failed to connect, retry in 20sec

Repeat repeat

Any idea what is going on or how to find out?

[andrenym00]

I am dual mining ethereum classic + shield/blake2s in claymore 11 with rx580. gpu-z is showing power only draw of 115w. Does this sound about right? Mining eth classic by itself was showing about 94w.

[mraug]

Forgot to switch off updates on one of my Windows machines and it downloaded some MS crap and broke my mining config.

I run DDU and installed latest Radeon drivers + run atikmdagpatcher but after reboot I'm getting only 16-17 MH/s on rx470 4GB.

I used to get between 26 and 29 MH/s.

Whats wrong? Also afterburner is not working anymore.

Mind that I flashed all 6 cards so theoretically I shouldn't need any afterburner tweaking. It seems almost as if the DAG issue is back for me.

edit:

Just checked in Radeon Settings, all cards are running on their preconfigured settings (1900 memory, 1090 GPU). Why am I getting only 16 MH/s???

edit2: COMPUTE MODE!!!!! damn you AMD... all good now.

[hous26]

Are there ANY coins worth dual mining now?

[vapourminer]

Forgot to switch off updates on one of my Windows machines and it downloaded some MS crap and broke my mining config.

I run DDU and installed latest Radeon drivers + run atikmdagpatcher but after reboot I'm getting only 16-17 MH/s on rx470 4GB.

I used to get between 26 and 29 MH/s.

Whats wrong? Also afterburner is not working anymore.

Mind that I flashed all 6 cards so theoretically I shouldn't need any afterburner tweaking. It seems almost as if the DAG issue is back for me.

edit:

Just checked in Radeon Settings, all cards are running on their preconfigured settings (1900 memory, 1090 GPU). Why am I getting only 16 MH/s???

driver set to "graphics" instead of "compute" in amd settings?

[cryptoillusion1]

Forgot to switch off updates on one of my Windows machines and it downloaded some MS crap and broke my mining config.

I run DDU and installed latest Radeon drivers + run atikmdagpatcher but after reboot I'm getting only 16-17 MH/s on rx470 4GB.

I used to get between 26 and 29 MH/s.

Whats wrong? Also afterburner is not working anymore.

Mind that I flashed all 6 cards so theoretically I shouldn't need any afterburner tweaking. It seems almost as if the DAG issue is back for me.

edit:

Just checked in Radeon Settings, all cards are running on their preconfigured settings (1900 memory, 1090 GPU). Why am I getting only 16 MH/s???

Have you got it in compute mode?

[IncludeBeer]

Forgot to switch off updates on one of my Windows machines and it downloaded some MS crap and broke my mining config.

I run DDU and installed latest Radeon drivers + run atikmdagpatcher but after reboot I'm getting only 16-17 MH/s on rx470 4GB.

I used to get between 26 and 29 MH/s.

Whats wrong? Also afterburner is not working anymore.

Mind that I flashed all 6 cards so theoretically I shouldn't need any afterburner tweaking. It seems almost as if the DAG issue is back for me.

edit:

Just checked in Radeon Settings, all cards are running on their preconfigured settings (1900 memory, 1090 GPU). Why am I getting only 16 MH/s???

Have you got it in compute mode?

Fuck! This fixed my problem, too. So much time and effort for something so trivial to fix. Time to drink.

[muzuca]

Hi guys, my rig keeps going offline. On restart I see the following

dev/sda2: recovering journal
dev/sda2: clean, 127903/436320 files, number number blocks
Created slice user Slice of miner
Starting user manager for uid 1000
Started session 7 of user miner
Stopping user manager for uid 1000
A slice job is running for raise network (4min/5min3s)
Repeat repeat until time reaches 5 min

Some Claymore Miner information

Cannot resolve 'eth-eu2.nanopool.org'
ETH: Stratum - Cannot connect to eth-eu2.nanopool.org:9999
ETH: Stratum - Failed to connect, retry in 20sec

Repeat repeat

Any idea what is going on or how to find out?

I'm getting same error and I'm investigating. I don't if is something with my rigs or internet.

[Ratledge]

And right now I am having GPU 0 hash rate 0 issue, it happens identically 2 of my rigs. It happens whenever I remote connect via teamviewer then I need to restart the rig, and I need to be there physically to do that(gotta switch the display otherwise it is not going to work) I do not have this problem before windows update and v.11 but I guess it has nothing to do with v.11, I downgraded v.10.6 and still happens.
...

use a dummy plug OR attach a monitor (monitor need not be switched on)
https://www.amazon.com/Headless-Display-Emulator-Headless-1920x1080-generation/dp/B06XT1Z9TF

Those are 1920 x 1080 max at 60 hertz.  For the same price you can get 3840 x 2160 support (item looks identical) on eBay here: https://www.ebay.com/itm/HDMI-Display-port-Dummy-Plug-4K-Display-MINING-3840-2160-60Hz-Headless-Emulator/222825303024?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 shipping from the US (Texas, I think?) or if you have plenty of time the same item is $2.79 shipped from China (same meaning also 3840 x 2160 or "4K" support) here: https://www.ebay.com/itm/HDMI-Display-Emulator-Dummy-Plug-Headless-Ghost-1-4-DDC-EDID-for-PC-Mac-Devices/202212531225?ssPageName=STRK%3AMEBIDX%3AIT&var=502180406403&_trksid=p2057872.m2749.l2649.

[muzuca]

Are there ANY coins worth dual mining now?

I'm mining ETH + XVG, but with a low intensity to avoid spent a lot of energy.

[Ratledge]

Guys is ethermine.org still one of the go to pools for ethereum mining?

I always have about 96% accepted shares and 4% stale shares .. ? Why 4%? Is that the miner fee?
What does stale mean in this relation?

I mean the weekly outcome is good but slightly below of the whattomine calculation with my "reported" hashrate from my rigs.

All rigs perfectly stable since the last restart one week ago. No disconnects, restarts, etc.

Any help or info for me?

Thanks a lot!

In the context of pool mining, a 'stale' share means that someone else beat you to it (i.e. it was reported already).

[esrodrig]

Hi all

Thank you for your miner. I've used use for several months and its great. Keep the good work please.

Now version 10.5 does detect my 5 cards 4-570 and 1-VEGA-56

Version 11 does not detect the VEGA-56. Does version 11.1 fix that?

I have not tried upgrading yet drivers yet. But same system I start 10.5 works great. I stop it and start 11 and the VEGA 56 is not shown when miner initializes.

Any thoughts?

- Esr