[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[Fahim021]

Hi bro, this one is afterburner settings or simple mining settings ? I have found great variations between the two

It loads DAG file and then hangs. I have removed overlooking. Now let's see.
Also can anyone suggest me a better overclocking setting for p106? I used

Core clock 80
Memory clock 1600
Watt 80

Cards were not stable

This was rather better setting but the rig seem to restart after few hours

Core clock 80
Memory clock 1400
Watt 100

HI, i am using 13 p106-100 msi card in 1 rig.  Since last 2 days I am getting error "binary file (standard input) matches simple mining" very often and rig freezes. It doesn't restart itself. Kindly help !!

You need to  provide more information, this has no value, does the OS load? Does the miner start then fail?
Tough to help with out information.
If you have ANY overclocks, take them all out then reboot.

Jadah tinggi sgt,

anyway, my setting:

P106 Eth

PL 75W
Core: -200
Mem: 1200-1400 (depend on card, some of them can take 1400)

[citronick]

Hi bro, this one is afterburner settings or simple mining settings ? I have found great variations between the two

It loads DAG file and then hangs. I have removed overlooking. Now let's see.
Also can anyone suggest me a better overclocking setting for p106? I used

Core clock 80
Memory clock 1600
Watt 80

Cards were not stable

This was rather better setting but the rig seem to restart after few hours

Core clock 80
Memory clock 1400
Watt 100

HI, i am using 13 p106-100 msi card in 1 rig.  Since last 2 days I am getting error "binary file (standard input) matches simple mining" very often and rig freezes. It doesn't restart itself. Kindly help !!

You need to  provide more information, this has no value, does the OS load? Does the miner start then fail?
Tough to help with out information.
If you have ANY overclocks, take them all out then reboot.

Jadah tinggi sgt,

anyway, my setting:

P106 Eth

PL 75W
Core: -200
Mem: 1200-1400 (depend on card, some of them can take 1400)

Zotac P106-100
PL 99
core +200
mem +1400

[davemanet]

New request: email alert if system resets and last known log of what happened.  Usually before the system resets, one of the GPU's will go to 0 hash and the rig will reset.  This will help us identify which card was overclocked too much and caused the reset.

[He11cat]

Are they hashing the same? Temperature is a complex question. It could be one card came from a better or worse batch AKA silicon lottery. It could be their physical locations in real life. You need to experiment with your overall cooling solution. What's the temp running the new card alone AND physically in the same location as the original? For example, I run 13 x RX 580's on a 3-tier, 14-GPU rack, and the middle-row, middle card ALWAYS runs the coolest, and the top-row, last card ALWAYS runs the hottest. The difference is huge... 13°C. Guess what happens when I swap the coolest card and hottest card? EXACT same result.

With that in mind, I do see an overall 6-8-°C improvement from turning the rack 90° relative to the wall vs directly at the wall even though the wall is 5 feet away. The point is experiment on cooling... literally and physically.

Hello! I have a problem with my rig; just added second card for mining but it runs hotter (GTX1070). I tried to downclock but it's still hot. What do you suggest?

Please find attached screenshot.. Thanks for your help!

https://pasteboard.co/GOyEoVI.png

@logicassets, thanks for your help! I changed the pci-e slot for the cards, now they hashing and cooling equally

[logicassets]

I second smtp alerts. It takes ethermine 30 mins to smtp alert you that your worker is down. Thanks!

New request: email alert if system resets and last known log of what happened.  Usually before the system resets, one of the GPU's will go to 0 hash and the rig will reset.  This will help us identify which card was overclocked too much and caused the reset.

[He11cat]

Any way to mine Monacoin (Lyra2REv2) using the SMOS?

[logicassets]

Happy it helped! Happy mining!! 

Are they hashing the same? Temperature is a complex question. It could be one card came from a better or worse batch AKA silicon lottery. It could be their physical locations in real life. You need to experiment with your overall cooling solution. What's the temp running the new card alone AND physically in the same location as the original? For example, I run 13 x RX 580's on a 3-tier, 14-GPU rack, and the middle-row, middle card ALWAYS runs the coolest, and the top-row, last card ALWAYS runs the hottest. The difference is huge... 13°C. Guess what happens when I swap the coolest card and hottest card? EXACT same result.

With that in mind, I do see an overall 6-8-°C improvement from turning the rack 90° relative to the wall vs directly at the wall even though the wall is 5 feet away. The point is experiment on cooling... literally and physically.

Hello! I have a problem with my rig; just added second card for mining but it runs hotter (GTX1070). I tried to downclock but it's still hot. What do you suggest?

Please find attached screenshot.. Thanks for your help!

https://pasteboard.co/GOyEoVI.png

@logicassets, thanks for your help! I changed the pci-e slot for the cards, now they hashing and cooling equally

[Warlockmng]

Hello, I have installed simpleminer-NV-v1118-kernel4.11.12 on rig of 5x MSI nVidia 1070  and have constant message:
============ Starting Miner ===============
GO TO GLOBAL OPTIONS or RELOAD RIG if you already configured options and this ris is new added !!!!!

I set wallets and stuff in GO TO GLOBAL OPTIONS. Could you advise how to fix this?

I have the same problem since I ran the update from SMOS web control panel.

Can someone please help us?

Seriously....

For a guy who's almost certainly making $10's of thousands per month (my guess 20-100k/month) - you think you could afford to hire a bit of help to make this a really great OS?!

Like please, for the sake of all the users. Go on to UpWork and hire some help for cheap. This is nuts. The errors are insane at this point and there are almost 300pgs of threads - who has time to read all of that!?

Yeah, it seems that helping customers is not a priority. I was not able to fix this problem so I'm thinking about moving to ethOS.

I have 10 rigs online and I'm paying every single day for an OS whitout official support.

[chuck732]

I'm happy to say that after trying forever it seems I got my rig running for now. Got the clocks back to stock and power usage to 115 watts for the 177 watts. I tried the SSH which would not work. I started to think why is it not going back to stock with a fresh flash on the usb. So I decided to delete my rig from the riglist on the dashboard on HIS website where it stores your settings. It worked. Every thing went back to stock. I am scared of trying to change any settings in fear of going thru hell again. So under the overclocking my settings are left to stock what you get when you install simplemining.

Core MHz  0
Memory MHz 0
Power Limits 6
Target Temperature  75C
Minimum Fan Speed  30%

I'm mining zcash, so for MSI GTX 1070 Gaming X cards whats a good overclock for the core and power limit?
 

[Mr_zero]

Hello, I have installed simpleminer-NV-v1118-kernel4.11.12 on rig of 5x MSI nVidia 1070  and have constant message:
============ Starting Miner ===============
GO TO GLOBAL OPTIONS or RELOAD RIG if you already configured options and this ris is new added !!!!!

I set wallets and stuff in GO TO GLOBAL OPTIONS. Could you advise how to fix this?

I have the same problem since I ran the update from SMOS web control panel.

Can someone please help us?

Seriously....

For a guy who's almost certainly making $10's of thousands per month (my guess 20-100k/month) - you think you could afford to hire a bit of help to make this a really great OS?!

Like please, for the sake of all the users. Go on to UpWork and hire some help for cheap. This is nuts. The errors are insane at this point and there are almost 300pgs of threads - who has time to read all of that!?

Yeah, it seems that helping customers is not a priority. I was not able to fix this problem so I'm thinking about moving to ethOS.

I have 10 rigs online and I'm paying every single day for an OS whitout official support.

Yeah I mean I really really liked SMOS - it's just now, at least for me, as work becomes more of a priority and I spend more money on rigs - it's like this has to scale up from a "side project" to a business.

I think a focus on customer support would be really beneficial.

Going to try ethOS tonight on 1 rig - if that goes well then...

[naeme18720]

Hi

Not fixed driver Amd in os?
My GPU rx470
Yet 24 mh...in win 27.300

[DangerD]

Hi, how can i run additional program on your linux?
Need to run infinite ping to specified host. (ping -t 192.168.0.123) for example. (Needed for watchdog)

tytanick? Can't get any answer within one month...

[chuck732]

You'll learn he doesn't talk much. You'll have to search high and low thru forums to get answers. And you may get lucky and some one here may have your answer. There are some nice people in here but you'll have to wait. Have you tried the simplemining chat room?

http://chat.simplemining.net/channel/general

Hi, how can i run additional program on your linux?
Need to run infinite ping to specified host. (ping -t 192.168.0.123) for example. (Needed for watchdog)

tytanick? Can't get any answer within one month...

[frank1s]

oc on nvidia cards not working any suggestion how to oc cards on smos?  or we should just leave this miner im losing money..

[chuck732]

Hey somebody on another forum help me with this. What cards do you have?

oc on nvidia cards not working any suggestion how to oc cards on smos?  or we should just leave this miner im losing money..

[saverik]

Hi ,,,

I have a cpu amd Fx8370 with 16 Gb ram and graphics amd xfx6950 with 2 Gb ram.

Is better to use on cpu or Gpu?

[frank1s]

Hey somebody on another forum help me with this. What cards do you have?

oc on nvidia cards not working any suggestion how to oc cards on smos?  or we should just leave this miner im losing money..

nvidia gtx 1060

[chuck732]

I have gtx 1070's and my cards run at 115 watts each. So you 1060's I don't know but think you can get away with 70 watts per cards. You can change to wattage to what you want. This is for 6 cards. So edit it to the amount of cards you have. So try this --

Core                0,0,0,0,0,0
Memory           0,0,0,0,0,0
Power Limit      70,70,70,70,70,70

The person that told me to try this said it works on nvidia that have problems with incorrect overclock readings. Let me know.

Hey somebody on another forum help me with this. What cards do you have?

oc on nvidia cards not working any suggestion how to oc cards on smos?  or we should just leave this miner im losing money..

nvidia gtx 1060

[frank1s]

I have gtx 1070's and my cards run at 115 watts each. So you 1060's I don't know but think you can get away with 70 watts per cards. You can change to wattage to what you want. This is for 6 cards. So edit it to the amount of cards you have. So try this --

Core                0,0,0,0,0,0
Memory           0,0,0,0,0,0
Power Limit      70,70,70,70,70,70

The person that told me to try this said it works on nvidia that have problems with incorrect overclock readings. Let me know.


tnx but it didnt work core clock is : 1936   and mem clock is still :3802    for all 2rigs and 12cards

[chuck732]

Have a question for you. Can you change the clocks, power limits at all?

I have gtx 1070's and my cards run at 115 watts each. So you 1060's I don't know but think you can get away with 70 watts per cards. You can change to wattage to what you want. This is for 6 cards. So edit it to the amount of cards you have. So try this --

Core                0,0,0,0,0,0
Memory           0,0,0,0,0,0
Power Limit      70,70,70,70,70,70

The person that told me to try this said it works on nvidia that have problems with incorrect overclock readings. Let me know.


tnx but it didnt work core clock is : 1936   and mem clock is still :3802    for all 2rigs and 12cards