frank1s
Newbie
Offline
Activity: 6
Merit: 0
|
|
October 14, 2017, 03:51:01 PM |
|
Have a question for you. Can you change the clocks, power limits at all? I have gtx 1070's and my cards run at 115 watts each. So you 1060's I don't know but think you can get away with 70 watts per cards. You can change to wattage to what you want. This is for 6 cards. So edit it to the amount of cards you have. So try this --
Core 0,0,0,0,0,0 Memory 0,0,0,0,0,0 Power Limit 70,70,70,70,70,70
The person that told me to try this said it works on nvidia that have problems with incorrect overclock readings. Let me know.
tnx but it didnt work core clock is : 1936 and mem clock is still :3802 for all 2rigs and 12cards
https://ibb.co/k8kq6Gi tried different core-mem combinations but i doesnt apply att all- for example i used setting: 150,150,150,150,150,150 1400,1400,1400,1400,1400,1400 70,70,70,70,70,70 0,0,0,0,0,0,0 0,0,0,0,0,0,0 70,70,70,70,70,70 but the result is the same each time
|
|
|
|
chuck732
Member
Offline
Activity: 141
Merit: 10
|
|
October 14, 2017, 04:18:11 PM Last edit: October 14, 2017, 04:31:38 PM by chuck732 |
|
I had the same problem. Your settings are stored on simplemining server. So what I did was deleted my rig from the rig list in the dashboard. But the hard part is getting it back in the list and I am trying like to remember how I did it. Your trying to put the same rig back into the list that you deleted out. And your rig is still in the rig groups. Just remembered You will need to add a new group in the rig groups. Make it the same as the one you removed. Then set it to default, once you have done that. You delete the old one out. BUT you do this on your own. It worked for me, but I cannot say it will work for you. Have a question for you. Can you change the clocks, power limits at all? I have gtx 1070's and my cards run at 115 watts each. So you 1060's I don't know but think you can get away with 70 watts per cards. You can change to wattage to what you want. This is for 6 cards. So edit it to the amount of cards you have. So try this --
Core 0,0,0,0,0,0 Memory 0,0,0,0,0,0 Power Limit 70,70,70,70,70,70
The person that told me to try this said it works on nvidia that have problems with incorrect overclock readings. Let me know.
tnx but it didnt work core clock is : 1936 and mem clock is still :3802 for all 2rigs and 12cards
https://ibb.co/k8kq6Gi tried different core-mem combinations but i doesnt apply att all- for example i used setting: 150,150,150,150,150,150 1400,1400,1400,1400,1400,1400 70,70,70,70,70,70 0,0,0,0,0,0,0 0,0,0,0,0,0,0 70,70,70,70,70,70 but the result is the same each time
|
|
|
|
frank1s
Newbie
Offline
Activity: 6
Merit: 0
|
|
October 14, 2017, 05:05:54 PM |
|
thanks man you helped alot I had the same problem. Your settings are stored on simplemining server. So what I did was deleted my rig from the rig list in the dashboard. But the hard part is getting it back in the list and I am trying like to remember how I did it. Your trying to put the same rig back into the list that you deleted out. And your rig is still in the rig groups. Just remembered You will need to add a new group in the rig groups. Make it the same as the one you removed. Then set it to default, once you have done that. You delete the old one out. BUT you do this on your own. It worked for me, but I cannot say it will work for you. Have a question for you. Can you change the clocks, power limits at all? I have gtx 1070's and my cards run at 115 watts each. So you 1060's I don't know but think you can get away with 70 watts per cards. You can change to wattage to what you want. This is for 6 cards. So edit it to the amount of cards you have. So try this --
Core 0,0,0,0,0,0 Memory 0,0,0,0,0,0 Power Limit 70,70,70,70,70,70
The person that told me to try this said it works on nvidia that have problems with incorrect overclock readings. Let me know.
tnx but it didnt work core clock is : 1936 and mem clock is still :3802 for all 2rigs and 12cards
https://ibb.co/k8kq6Gi tried different core-mem combinations but i doesnt apply att all- for example i used setting: 150,150,150,150,150,150 1400,1400,1400,1400,1400,1400 70,70,70,70,70,70 0,0,0,0,0,0,0 0,0,0,0,0,0,0 70,70,70,70,70,70 but the result is the same each time
|
|
|
|
chuck732
Member
Offline
Activity: 141
Merit: 10
|
|
October 14, 2017, 05:37:09 PM |
|
Did you try it? And if yes did it work? thanks man you helped alot I had the same problem. Your settings are stored on simplemining server. So what I did was deleted my rig from the rig list in the dashboard. But the hard part is getting it back in the list and I am trying like to remember how I did it. Your trying to put the same rig back into the list that you deleted out. And your rig is still in the rig groups. Just remembered You will need to add a new group in the rig groups. Make it the same as the one you removed. Then set it to default, once you have done that. You delete the old one out. BUT you do this on your own. It worked for me, but I cannot say it will work for you. Have a question for you. Can you change the clocks, power limits at all? I have gtx 1070's and my cards run at 115 watts each. So you 1060's I don't know but think you can get away with 70 watts per cards. You can change to wattage to what you want. This is for 6 cards. So edit it to the amount of cards you have. So try this --
Core 0,0,0,0,0,0 Memory 0,0,0,0,0,0 Power Limit 70,70,70,70,70,70
The person that told me to try this said it works on nvidia that have problems with incorrect overclock readings. Let me know.
tnx but it didnt work core clock is : 1936 and mem clock is still :3802 for all 2rigs and 12cards
https://ibb.co/k8kq6Gi tried different core-mem combinations but i doesnt apply att all- for example i used setting: 150,150,150,150,150,150 1400,1400,1400,1400,1400,1400 70,70,70,70,70,70 0,0,0,0,0,0,0 0,0,0,0,0,0,0 70,70,70,70,70,70 but the result is the same each time
|
|
|
|
DangerD
Newbie
Offline
Activity: 24
Merit: 0
|
|
October 15, 2017, 09:38:44 AM |
|
You'll learn he doesn't talk much. You'll have to search high and low thru forums to get answers. And you may get lucky and some one here may have your answer. There are some nice people in here but you'll have to wait. Have you tried the simplemining chat room? http://chat.simplemining.net/channel/generalHi, how can i run additional program on your linux? Need to run infinite ping to specified host. (ping -t 192.168.0.123) for example. (Needed for watchdog)
tytanick? Can't get any answer within one month... Didn't get answer there,same as here... Need to add cron manage tool through web interface... Yes i can add all of this manually, but i have a lot of rigs...
|
|
|
|
telep
Newbie
Offline
Activity: 13
Merit: 1
|
|
October 16, 2017, 10:10:31 AM |
|
Hi everybody.
You know if there´s some way to recieve an alert when one rig went´s down?
It sould be a must have feature.
Regards.
|
|
|
|
shabbat
Newbie
Offline
Activity: 36
Merit: 0
|
|
October 16, 2017, 01:00:42 PM |
|
Hey. Thanks for your work! request. Add the gatelessgate-Monero miner v0.1.3-pre6
|
|
|
|
indiainside
Newbie
Offline
Activity: 16
Merit: 0
|
|
October 16, 2017, 01:23:47 PM |
|
Hey. Thanks for your work! request. Add the gatelessgate-Monero miner v0.1.3-pre6
Share more about this miner , is it better than claymore !!!
|
|
|
|
PCBProjeT
Newbie
Offline
Activity: 7
Merit: 0
|
|
October 16, 2017, 03:16:33 PM |
|
proving it and testing it, easy to set up and very pleasant to use...!
|
|
|
|
|
adamiss5138
Newbie
Offline
Activity: 1
Merit: 0
|
|
October 16, 2017, 05:17:16 PM |
|
Hi guys, does overclocking in RX DagFix image work? I set Memory clock to 2250 and it literally does nothing. Memory Clock remains the same. Thank you for your reply.
|
|
|
|
Vispilio
Legendary
Offline
Activity: 2128
Merit: 1657
|
|
October 16, 2017, 08:21:57 PM |
|
Hi guys, does overclocking in RX DagFix image work? I set Memory clock to 2250 and it literally does nothing. Memory Clock remains the same. Thank you for your reply.
Bu imza kampanyası meselesini kavramış değilim. Fakat Easymine cılar ile konuşarak, ICO için Türkçeleştirdiğim sayfadan da ICO ya katılabilirsiniz. https://ico.easymine.io/icoTr.htmlEasymine'ı baybil.net de desteklemektedir. Bol kazançlar. Eğer imza kampanyası maksadına ters düştüğünü düşünüyorsanız, baybil.net üzerinden benimle temasa geçerek bu yazıyı silmemi isteyebilrisiniz. nice Turkish plug in, but way off topic bro...
|
|
|
|
davemanet
|
|
October 16, 2017, 08:53:17 PM |
|
does anyone know how to make Dwarfpool send us an email if our worker stops mining? on Dwarfpool page it says this but I don't know how I should edit SMOS.
Monitoring
To enable monitoring of your worker, use email as password. To disable monitoring, restart your miner without email as password.
Email will be send if no shares last 15 minutes.
In combine with WORKER_ID you can monitor your rigs separately.
|
|
|
|
Wolverine_Na
Newbie
Offline
Activity: 17
Merit: 0
|
|
October 17, 2017, 04:42:52 AM |
|
Hi guys, does overclocking in RX DagFix image work? I set Memory clock to 2250 and it literally does nothing. Memory Clock remains the same. Thank you for your reply.
Overclocking in RX DagFix works for me. You can try: - check gpu bios for memory speed and volt. - increase Powerstage.
|
|
|
|
Threader2017
Newbie
Offline
Activity: 2
Merit: 0
|
|
October 17, 2017, 06:55:46 AM |
|
Asus B250 Mining Expert mobo seems to work faulty on Simplemining! needs an update ASAP! I have 22 rigs on simpleminig, 2 of them run on B250 Mining Expert mobos, they get completely locked up once a day. It's very frustrating. Please contact me or do something about my favorite mining OS. I need to run those rigs 24/7
|
|
|
|
toda
Newbie
Offline
Activity: 2
Merit: 0
|
|
October 17, 2017, 07:15:20 AM |
|
Seriously....
For a guy who's almost certainly making $10's of thousands per month (my guess 20-100k/month) - you think you could afford to hire a bit of help to make this a really great OS?!
Like please, for the sake of all the users. Go on to UpWork and hire some help for cheap. This is nuts. The errors are insane at this point and there are almost 300pgs of threads - who has time to read all of that!?
Do not count money in somebody's pocket and to tell people what to do it is dangerous for your health and your karma. If you don't understand it now you will eventually. If I had 20-100k/month I would not be here. At the beginning SMOS looks like good thing but because of luck of information and guys like you it is not any longer. I am pretty capable of to install ubuntu + claymore on my 4 rigs.
|
|
|
|
davemanet
|
|
October 17, 2017, 07:19:09 AM |
|
SMOS is a wonderful OS. I'm running several rigs with it. I, like many of you, once had problems and thought it was due to SMOS. It's not. It's likely one of the components in your system.
Good job Tytanick, keep up the good work! Please keep software as stable as possible it's working good right now!
|
|
|
|
logicassets
Newbie
Offline
Activity: 49
Merit: 0
|
|
October 17, 2017, 07:46:12 AM |
|
I think you answered your own question. If you have 22 rigs on SmOS, and the 2 Asus B250 motherboard rigs regularly have problems, the problem is not SmOS. Google it and you'll find EVERYONE has problems with the B250, and NOONE is running 19-GPU's stable. Ask ASUS. Good luck! Asus B250 Mining Expert mobo seems to work faulty on Simplemining! needs an update ASAP! I have 22 rigs on simpleminig, 2 of them run on B250 Mining Expert mobos, they get completely locked up once a day. It's very frustrating. Please contact me or do something about my favorite mining OS. I need to run those rigs 24/7
|
|
|
|
FirstRigger
Newbie
Offline
Activity: 25
Merit: 0
|
|
October 17, 2017, 08:25:00 AM |
|
Hi guys, does overclocking in RX DagFix image work? I set Memory clock to 2250 and it literally does nothing. Memory Clock remains the same. Thank you for your reply.
Overclocking in RX DagFix works for me. You can try: - check gpu bios for memory speed and volt. - increase Powerstage. No, it is not working fine. With RX580 you can try: powerstage 1 Undervoltage 800 than powerstage 5 undervoltage 1000 The powerdraw from wall is almost the same.
|
|
|
|
Threader2017
Newbie
Offline
Activity: 2
Merit: 0
|
|
October 17, 2017, 08:51:45 AM |
|
I think you answered your own question. If you have 22 rigs on SmOS, and the 2 Asus B250 motherboard rigs regularly have problems, the problem is not SmOS. Google it and you'll find EVERYONE has problems with the B250, and NOONE is running 19-GPU's stable. Ask ASUS. Good luck! Asus B250 Mining Expert mobo seems to work faulty on Simplemining! needs an update ASAP! I have 22 rigs on simpleminig, 2 of them run on B250 Mining Expert mobos, they get completely locked up once a day. It's very frustrating. Please contact me or do something about my favorite mining OS. I need to run those rigs 24/7 The thing is I only run 8x 1080ti on this ASUS B250 Mining Expert, I never tried more than that. 8 GPUs and the whole system gets locked daily!
|
|
|
|
|