"I did buy some stuff in anticipation of getting a Titan, thermal paste, copper heatsinks, a bi-metal blade for my bandsaw, and some new PSU's. Most of that stuff is still in route in the mail. And was looking at the fan upgrade idea. However I would like a better rig for a starting point to do these upgrades. I guess I will just have to see how this all shakes out."
Before you or anyone else cuts the Cooler hold down on the titan cubes, I have designed and had made a cooler bracket modification that mounts to the board in 4 points instead of the current 3 points. This allows for more stable and even pressure, and has allowed for some flaky dies to start working. It also allows for you to put what ever heatsink solution you want on all of the DC/DC's. Also your original plate is unmodified.
This is also a simple bolt in modification, with no cutting or other modification required.
I am selling these brackets for $10.00 per cube, and $6.00 shipping in USA, more for elsewhere, for up to 20 bracket sets. I am also including the black hold down screws in the pictures below for each kit.
Anyone who knows me can verify that I have been running multiple Titans for over 18 months.
http://postimg.org/gallery/ldlpfife/I obviously will also take payment in LTC/BTC.
PM me with any questions.
I have 12 on the way. the modified heat sink blocks for the titans..look at the pics....very 'alien movie' like how the laser cutter molded around the cooler fan tubes imho
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
again he is legit for what my word is worth.....mine are in the mail as we speak
but 10 bucks each is a steal! (It is amazing what laser cutting stuff can do on solid blocks of aluminum these days)
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
well hell now I will pretty much have everything i need to re-do a cube sitting in a box of parts now. Time to try and save the 1 die working only cube (it was at one time one
of the 1/2 working cubes knc sent out in pairs to replace your 1 full dead cube...cheap bastards)..dare to dream
so hell maybe with a re-paste /small heat-sinks/this mod/ the better fan (from Swedish knc titan fix YouTube video) If I can get the puppy up to 2 dies again that is.
(then again I could send it to Lightfoot he likely could fix the works...and rub KNC Techs face in the fact SUPPOSEDLY these 'returned' 1/2 working titan cubes are
unfix-able up to all 4 dies. (also have him check for sabotage to make this so... .heh it is what knc does ...evil don't ya know )
but alas can't afford it ...too cheap .....got a full working Titan Cube for $385 (120 ltc at the time) about 4 weeks ago so now spoiled
![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
Summer is coming boys and girls I expect CHEAP Titan stuff gonna be dumped because of heat issues etc (unless we get a damn good pump on btc and ltc from the btc halving)
fun times
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
later
edit: Also note you get the x bars and 2 screws etc ...from what I understand all the other screws stuff can be re-used from the heat sink plate you are removing for this 4 port mount.
Also you need to re-paste for newbies. Also for newbies to this tear down. YOU MUST get some type of small heatsinks for the modules the KNC heatsink covered as seen in
the pictures. I think he is gonna give a link to a bigger heatsink(s)? to enhance the X form setup also. But again from what I understand HIS X frame setup that replaces
the KNC Heatsinks with the small module chip heatsinks individual replacement and of course re-paste....Has the SAME heat etc as standard knc with the big old heat sink they provide
The advantage (imho) is the x factor way above allows you to better seal/set the cooler imho and of course gives room for ALL the small module heatsinks (unlike the swedish guy video mod)
anyway for what it is worth. Again imho with this X factor rig and thermal re-paste with the small vrms and maybe when he links it the bigger heatsink for the X cross setup. It
likely will not be any worse then the big ass KNC plate sucked down with foam arrangement. His arrangement again imho would sure kick ass for air flow also.
but anyway I can only say why I think this is so at this point. Contact him for further details on risks/rewards. But me it has been 17 months 24/7 so I know I need to start
the process of re-paste etc before Summer hits (no A/C basement pull fan and shutter push fan out in basement)
lostgonzo.imgur.comthus for stability and air flow reasons I got 12 of these puppies. I will also likely replace fans with the better ones. (The ones shown in the swedish guy video)
I expect some modest improvement for my 10 bucks. In reality thou it will likely be the re-paste of such after 17 months and the small module heat sinks and the LOUD fan replacement
with IMPROVED air flow that will do it...or so why I'm going with this.
anyway figured I'd better edit this post from my other post here and this is what I'm gonna do/use on my attempt at re-pasting cubes.
as always it is KNC stuff and 'evil' all attempts to try and 'muck' with KNC equipment of any kind can end in them 'winning' and bricking themselves..it is what they are
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
(Also consider the source here ME....best to be wary of any advice...(at one time I believed in BFL the horror)
![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
whatever stuff to do
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)