dstm (OP)
|
|
October 21, 2017, 12:03:29 PM |
|
Plate with inscription about error is bad idea. Need write error to log file end close program. In my *.bat file next command is reboot, and if program close after error, rig is not stop, but will reboot and continue work.
I'll add logfile support. Rebooting on error is bad idea you might end up in a reboot loop which can damage your hardware.
|
|
|
|
sublimus
|
|
October 21, 2017, 12:04:42 PM |
|
Windows 0.5.2 alpha
This is an alpha, so it might contain bugs, pls report them if you hit any. Launch options are described on the OP, or simply run zm.exe without any arguments to get a description. If you get an error about missing VCRUNTIME140.dll you need to install the 'Visual C++ Redistributable for visual studio 2015'
Big thx to santan for providing access to a windows system.
add plz info about installation Visual C++ Redistributable for visual studio 2015 on first page. Did you try to GOOGLE installation Visual C++ Redistributable for visual studio 2015 ?
|
|
|
|
sublimus
|
|
October 21, 2017, 12:07:37 PM |
|
ZM.EXE has stopped working. Please fix this, I get this problem once a day and miner can't reset itself. I need to click "OK" on this error and only then it starts again. Can you update it, so even when there is this error it can start again
If it is a window error report YOU need to disable Error Reporting in windows settings.
|
|
|
|
henrynguyen
Member
Offline
Activity: 120
Merit: 10
|
|
October 21, 2017, 12:12:57 PM |
|
I can't mine on flypool.
|
The crypto currency of the future! ● RACE ● ✔ Fast ✔ Secure ✔ Anonymous ▄▄▄███ Masternodes | PoW | Secure | ASIC resistant | Lyra2REv2 ███▄▄▄ DISCORD TWITTER
|
|
|
dstm (OP)
|
|
October 21, 2017, 12:14:08 PM |
|
ZM.EXE has stopped working. Please fix this, I get this problem once a day and miner can't reset itself. I need to click "OK" on this error and only then it starts again. Can you update it, so even when there is this error it can start again
Is your system overclocked? I had no reports about crashes on non overclocked systems so far. If this happens on stock settings, pls lookup the error message in windows event viewer.
|
|
|
|
grunoff
Newbie
Offline
Activity: 63
Merit: 0
|
|
October 21, 2017, 12:32:16 PM |
|
I have a strange issue with Linux version. I`m new with Linux so the issue could be simple. I installed nvOc v0019-1.3.
I started mining with ZM 0.5.2 - It`s working like a charm!!! I set up a telemetry to 0.0.0.0:42002. In windows I make the same and it uses the address of computer. And I could enter it via, for example - 192.168.0.1:42002. With windows version it works, but with Linux version telemetry does not open via browser.
Could you please say me were I`m wrong.
Here is my launch
./zm --server eu1-zcash.flypool.org --port 3333 --user t1R5MDRcwGKqLr9n7v4o1s8TrvjQsVeWkyc.ZM_Ubuntu_1080TI --pass x --telemetry=0.0.0.0:42002
Thank you in advance.
|
|
|
|
Brzina
Member
Offline
Activity: 74
Merit: 20
|
|
October 21, 2017, 12:48:56 PM |
|
ZM.EXE has stopped working. Please fix this, I get this problem once a day and miner can't reset itself. I need to click "OK" on this error and only then it starts again. Can you update it, so even when there is this error it can start again
Is your system overclocked? I had no reports about crashes on non overclocked systems so far. If this happens on stock settings, pls lookup the error message in windows event viewer. Yup, of course it mines, it's overclocked, but not much. I did not have a singe problem on EWBF miner... Is this a crash report from event viewer ? "Log Name: Application Source: Application Error Date: 10/21/2017 1:40:41 PM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: DESKTOP-E5MD0ML Description: Faulting application name: zm.exe, version: 0.0.0.0, time stamp: 0x59e7480b Faulting module name: zm.exe, version: 0.0.0.0, time stamp: 0x59e7480b Exception code: 0xc0000005 Fault offset: 0x000000000000da61 Faulting process id: 0x970 Faulting application start time: 0x01d349753e0f6ba3 Faulting application path: C:\Users\B.I.O.S. S\Desktop\Kontrole neke\miners\zm052\zm.exe Faulting module path: C:\Users\B.I.O.S. S\Desktop\Kontrole neke\miners\zm052\zm.exe Report Id: 4b0333a7-8a9d-4a45-bdf9-63b72a6e5ac6 Faulting package full name: Faulting package-relative application ID: etc... Thanks
|
|
|
|
dstm (OP)
|
|
October 21, 2017, 12:52:44 PM |
|
I have a strange issue with Linux version. I`m new with Linux so the issue could be simple. I installed nvOc v0019-1.3.
I started mining with ZM 0.5.2 - It`s working like a charm!!! I set up a telemetry to 0.0.0.0:42002. In windows I make the same and it uses the address of computer. And I could enter it via, for example - 192.168.0.1:42002. With windows version it works, but with Linux version telemetry does not open via browser.
Could you please say me were I`m wrong.
Here is my launch
./zm --server eu1-zcash.flypool.org --port 3333 --user t1R5MDRcwGKqLr9n7v4o1s8TrvjQsVeWkyc.ZM_Ubuntu_1080TI --pass x --telemetry=0.0.0.0:42002
Thank you in advance.
Command line looks fine. Did you got your IPs right? Does ' http://127.0.0.1:42002' work if try it in a browser on the same system zm is running on?
|
|
|
|
grunoff
Newbie
Offline
Activity: 63
Merit: 0
|
|
October 21, 2017, 12:58:06 PM |
|
I have a strange issue with Linux version. I`m new with Linux so the issue could be simple. I installed nvOc v0019-1.3.
I started mining with ZM 0.5.2 - It`s working like a charm!!! I set up a telemetry to 0.0.0.0:42002. In windows I make the same and it uses the address of computer. And I could enter it via, for example - 192.168.0.1:42002. With windows version it works, but with Linux version telemetry does not open via browser.
Could you please say me were I`m wrong.
Here is my launch
./zm --server eu1-zcash.flypool.org --port 3333 --user t1R5MDRcwGKqLr9n7v4o1s8TrvjQsVeWkyc.ZM_Ubuntu_1080TI --pass x --telemetry=0.0.0.0:42002
Thank you in advance.
Command line looks fine. Did you got your IPs right? Does ' http://127.0.0.1:42002' work if try it in a browser on the same system zm is running on? Yes it`s working on that machine. I`ll look through it, what can be ... Possible some problems with router.
|
|
|
|
dstm (OP)
|
|
October 21, 2017, 01:08:01 PM |
|
ZM.EXE has stopped working. Please fix this, I get this problem once a day and miner can't reset itself. I need to click "OK" on this error and only then it starts again. Can you update it, so even when there is this error it can start again
Is your system overclocked? I had no reports about crashes on non overclocked systems so far. If this happens on stock settings, pls lookup the error message in windows event viewer. Yup, of course it mines, it's overclocked, but not much. I did not have a singe problem on EWBF miner... Is this a crash report from event viewer ? "Log Name: Application Source: Application Error Date: 10/21/2017 1:40:41 PM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: DESKTOP-E5MD0ML Description: Faulting application name: zm.exe, version: 0.0.0.0, time stamp: 0x59e7480b Faulting module name: zm.exe, version: 0.0.0.0, time stamp: 0x59e7480b Exception code: 0xc0000005 Fault offset: 0x000000000000da61 Faulting process id: 0x970 Faulting application start time: 0x01d349753e0f6ba3 Faulting application path: C:\Users\B.I.O.S. S\Desktop\Kontrole neke\miners\zm052\zm.exe Faulting module path: C:\Users\B.I.O.S. S\Desktop\Kontrole neke\miners\zm052\zm.exe Report Id: 4b0333a7-8a9d-4a45-bdf9-63b72a6e5ac6 Faulting package full name: Faulting package-relative application ID: etc... Thanks Exception code: 0xc0000005 is an ACCESS_VIOLATION on windows. So yes, it might be a bug in zm it might also be something wrong on your system, e.g. modified libraries. Try to lookup what microsoft suggest on 'Exception code: 0xc0000005'. If this is a bug in zm I'll fix it as soon as I'm able to reproduce it.
|
|
|
|
Brzina
Member
Offline
Activity: 74
Merit: 20
|
|
October 21, 2017, 01:47:19 PM |
|
I lowered the clock on my card more and I will see now will it be without errors. It's strange. Two days my two rigs worked without problems and today both crashed. I will keep you informed...
|
|
|
|
shibob
Full Member
Offline
Activity: 672
Merit: 154
Blockchain Evangelist.
|
|
October 21, 2017, 02:44:51 PM |
|
I have tested with 1070 rig for 7 hours, it's quite stable. But ZM uses is about 34% CPU, it's much more than EWBF's miner (5%). Hope ZM will have some improvement on this soon.
|
|
|
|
Makak4R
|
|
October 21, 2017, 02:52:07 PM |
|
What model of 1070 do you have? And what are your overclock settings?
I have two watercooled Palit Gamerocks, they running about 2050Mh core and 8600Mh memory and the power limit set to 116! the temps are very OKish with that settings about 64C so it is very fine with me I wonder, if I would overclock my CPU to 4000Ghz how it will show on the final result? have to check
|
|
|
|
MadeInUkraine
|
|
October 21, 2017, 02:59:36 PM |
|
Anybody can write own performance for 1080 cards? (not for 1080ti). And AfterBurner settings please. Thanks.
|
█████▄▄██████████▄▄█████ ███▄████████████████▄███ ████████████████████████ ████████████████████████ ████████████████████████ ████████████████████████ ████████████████████████ ████████████████████████ ████████████████████████ ████████████████████████ ██▀██████████████████▀██ ████▀▀████████████▀▀████ | | | | Ҝ Ҝ Ҝ | | | | Ҝ Ҝ Ҝ | | · Anonymity by CryptoNote · Zero premine & instamine · Low transaction fee |
|
|
|
djazher
Newbie
Offline
Activity: 41
Merit: 0
|
|
October 21, 2017, 03:09:45 PM |
|
I can't mine on flypool.
Yes, it does work
|
|
|
|
Kayfolom
Member
Offline
Activity: 68
Merit: 10
|
|
October 21, 2017, 03:15:41 PM |
|
Anybody can write own performance for 1080 cards? (not for 1080ti). And AfterBurner settings please. Thanks.
GIGABYTE GeForce GTX 1080 G1 GAMING # GPU0 connected to: zen.suprnova.cc:3618 # GPU0 server set difficulty to: 000f0f0f0f0f0f0f0f0f0f0f... > GPU0 74C Sol/s: 594.1 Sol/W: 3.30 Avg: 594.1 I/s: 311.0 Sh/s: 0.300 +++ > GPU0 76C Sol/s: 570.9 Sol/W: 3.25 Avg: 582.5 I/s: 307.8 Sh/s: 0.150 > GPU0 77C Sol/s: 573.2 Sol/W: 3.25 Avg: 579.4 I/s: 306.9 Sh/s: 0.167 ++ GPU0 79C Sol/s: 568.4 Sol/W: 3.23 Avg: 576.7 I/s: 306.0 Sh/s: 0.175 ++ GPU0 78C Sol/s: 510.8 Sol/W: 3.15 Avg: 563.5 I/s: 273.5 Sh/s: 0.200 +++ > GPU0 79C Sol/s: 572.5 Sol/W: 3.17 Avg: 565.0 I/s: 305.7 Sh/s: 0.217 +++ GPU0 80C Sol/s: 567.4 Sol/W: 3.17 Avg: 565.3 I/s: 305.2 Sh/s: 0.214 ++ GPU0 80C Sol/s: 569.4 Sol/W: 3.17 Avg: 565.9 I/s: 305.4 Sh/s: 0.250 +++++ # GPU0 server set difficulty to: 000a85994a85b6427ed35cdb... > GPU0 80C Sol/s: 580.4 Sol/W: 3.17 Avg: 567.5 I/s: 305.3 Sh/s: 0.233 + GPU0 80C Sol/s: 570.3 Sol/W: 3.18 Avg: 567.8 I/s: 305.1 Sh/s: 0.220 + GPU0 80C Sol/s: 576.9 Sol/W: 3.18 Avg: 568.6 I/s: 305.1 Sh/s: 0.209 + GPU0 80C Sol/s: 576.8 Sol/W: 3.19 Avg: 569.3 I/s: 305.5 Sh/s: 0.208 ++
No AfterBurner, im use excavator with config: [ {"time":5,"commands":[ {"id":1,"method":"device.set.tdp","params": ["0","90"]}, {"id":1,"method":"device.set.core_delta","params": ["0","80"]}, {"id":1,"method":"device.set.memory_delta","params":["0","830"]} ]}, {"event":"on_quit","commands":[ {"id":1,"method":"device.set.tdp","params": ["0","100"]}, {"id":1,"method":"device.set.core_delta","params": ["0","0"]}, {"id":1,"method":"device.set.memory_delta","params":["0","0"]} ]} ]
|
|
|
|
sp_
Legendary
Offline
Activity: 2940
Merit: 1087
Team Black developer
|
|
October 21, 2017, 03:18:49 PM Last edit: October 21, 2017, 03:39:17 PM by sp_ |
|
Just tested on gtx 1070 g1 gaming. (micron memory)
core +150 mem +700 tdp 100%
505 sol/s average rate. Pretty good. But haven't verified the results on the pool yet. The Pool results are looking good
ewfb is doing 480 at the same clock so thats a 5.2% improvement.
I would like the miner to exit up on a crash instead of restarting. Is this possible?
|
|
|
|
Mintycash
Member
Offline
Activity: 220
Merit: 14
|
|
October 21, 2017, 03:25:19 PM |
|
Sorry if this has been asked before.
Is there any way to select which graphic card you want to use?
Thanks
|
|
|
|
induktor
|
|
October 21, 2017, 03:25:34 PM |
|
Hi my tests so far: pool: zcash.flypool.org card: 1 x1080 Ti cpu: AM1 5350 (SOC low power quad core) os: LINUX Kopiemtu 2.0 Mod5 (lubuntu 14.04)
Hash rate at top efficiency: 600 Sols average (15 Sols more than EWBF miner)
CPU usage: 1 core at FULL load all the time (is a quad core, so i guess i'm ok, but not sure if it would be enough CPU to handle 3 cards later, will test)
Total power consumption at the wall 167W (entire computer included, measuring at the wall (AC)) So efficiency is pretty good, keep in mind i have 15W usage of the computer plus the PSU own's consumption (although it's pretty efficient) I would probably expect a bit more of such a beast card but anything above that, the efficiency drops a LOT!
hashrate reported at the pool seems to be correct (i need to test it more, only been mining por 1 hour)
So, my opinon on this miner: so far so good! good job dstm! thank you.
additional notes:
description says: --user address / worker and that is NOT correct, the format is: --user address.worker like in EWBF miner.
the output of the miner is pretty nice and simple (and no colors! thank god!, parsing miner output with colors is a pain in the ass, so highly appreciated that you haven't put any colors on it. I will prefer that it also output the shares being delivered, like the EWBF miner does, so we can see what is going on, specially the latency, we have a pretty crappy ISP and monitor the latency is pretty important for us.
if test goes well I'll replace EWBF by this miner on all my farms.
also dstm I think you should reduce fee to 1%, production is not as good as used to be and 2% is a bit high IMHO, but that's just me.
will report back if I found something interesting. indkt.
|
BTC addr: 1vTGnFgaM2WJjswwmbj6N2AQBWcHfimSc
|
|
|
anyken
Newbie
Offline
Activity: 55
Merit: 0
|
|
October 21, 2017, 03:34:13 PM |
|
Segmentation fault gpu_id 1 3 0x10830010600 unspecified launch failure gpu 1 unresponsive - check overclocking cudaMemcpy 1 failed ./zm-zec.sh: line 1: 32357 Segmentation fault ((((
ps: in ewbf all ok
|
|
|
|
|