OrientA
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 06:57:14 AM |
|
You know...As far as I know, VMProtect does not exist for Linux, and the antidebugs there are quite lax, this is probably the best moment to patch nofee option to use full speed, but no donation.
While I may not agree with the current fee amount, do you really think it's a good idea to do that? I feel the same.
|
|
|
|
Remember remember the 5th of November
Legendary
Offline
Activity: 1862
Merit: 1011
Reverse engineer from time to time
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 08:44:11 AM |
|
You know...As far as I know, VMProtect does not exist for Linux, and the antidebugs there are quite lax, this is probably the best moment to patch nofee option to use full speed, but no donation.
While I may not agree with the current fee amount, do you really think it's a good idea to do that? Depends if the reverser would have fun in doing so(doing re).
|
BTC:1AiCRMxgf1ptVQwx6hDuKMu4f7F27QmJC2
|
|
|
eranbtc
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 08:57:04 AM |
|
For reference - I'm currently getting 325 h/s per 7850, 92 h/s for my 5870 with the current Claymore miner.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 09:17:49 AM |
|
You know...As far as I know, VMProtect does not exist for Linux, and the antidebugs there are quite lax, this is probably the best moment to patch nofee option to use full speed, but no donation.
While I may not agree with the current fee amount, do you really think it's a good idea to do that? Depends if the reverser would have fun in doing so(doing re). You can do everything you want, of course. I want to get some experience and see what will happen with version for Linux, I will use this experience in future miners.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 09:19:53 AM |
|
Claymore, Can you add temperature on the console interface?
Miner shows temperature/fan data every 30sec. Use "-dbg 2" option to see data every 3sec.
|
|
|
|
omnik
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 09:28:00 AM |
|
Where is v7.0 windows version?
|
|
|
|
OrientA
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 09:29:57 AM |
|
Where is v7.0 windows version?
Is it faster than previous version?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 09:35:58 AM |
|
Where is v7.0 windows version?
Is it faster than previous version? v7.0 for Windows will be available today. It is not faster, the only improvement is GPU fan control. However, finally I have Linux version finished and now I can work on further speed improvements, for some cards it's possible to get some additional speedup.
|
|
|
|
hacko.bg
Newbie
Offline
Activity: 52
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 09:45:17 AM |
|
Tried the new linux miner, although I run into problem. System configuration is Ubuntu 14.04 Server LTS, 14.4 drivers. When I first ran the 13.12 miner, it gave me: -- GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory -- Tried with 14.6 miner, same error. Increased swap to 20GB - same error on both version of the linux miner.
I remember, that in windows version, I was able to run 14.6 version with 14.4 (yes, it was not optimal performance, but at least it worked)
What am I doing wrong?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 10:01:51 AM |
|
Tried the new linux miner, although I run into problem. System configuration is Ubuntu 14.04 Server LTS, 14.4 drivers. When I first ran the 13.12 miner, it gave me: -- GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory -- Tried with 14.6 miner, same error. Increased swap to 20GB - same error on both version of the linux miner.
I remember, that in windows version, I was able to run 14.6 version with 14.4 (yes, it was not optimal performance, but at least it worked)
What am I doing wrong?
I used default OS config, I did not change any settings for swap etc. Check your RAM size, I use 4GB and it works for 3 290X cards.
|
|
|
|
hacko.bg
Newbie
Offline
Activity: 52
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 10:13:41 AM |
|
Tried the new linux miner, although I run into problem. System configuration is Ubuntu 14.04 Server LTS, 14.4 drivers. When I first ran the 13.12 miner, it gave me: -- GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory -- Tried with 14.6 miner, same error. Increased swap to 20GB - same error on both version of the linux miner.
I remember, that in windows version, I was able to run 14.6 version with 14.4 (yes, it was not optimal performance, but at least it worked)
What am I doing wrong?
I used default OS config, I did not change any settings for swap etc. Check your RAM size, I use 4GB and it works for 3 290X cards. So actually 16GB swap file is not required for the Linux version at all? edit: when I try to run the miner it gives me GpuMiner k1a failed -48 error on all the cards, the machine is with 2GB ram, 800MB used, when miner starts, the usage goes to about 930MB. I suspect it is not a memory or swap size problem. What is the chance the problem to be with the 14.4 drivers I'm using?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 10:38:36 AM |
|
Tried the new linux miner, although I run into problem. System configuration is Ubuntu 14.04 Server LTS, 14.4 drivers. When I first ran the 13.12 miner, it gave me: -- GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory -- Tried with 14.6 miner, same error. Increased swap to 20GB - same error on both version of the linux miner.
I remember, that in windows version, I was able to run 14.6 version with 14.4 (yes, it was not optimal performance, but at least it worked)
What am I doing wrong?
I used default OS config, I did not change any settings for swap etc. Check your RAM size, I use 4GB and it works for 3 290X cards. So actually 16GB swap file is not required for the Linux version at all? edit: when I try to run the miner it gives me GpuMiner k1a failed -48 error on all the cards, the machine is with 2GB ram, 800MB used, when miner starts, the usage goes to about 930MB. I suspect it is not a memory or swap size problem. What is the chance the problem to be with the 14.4 drivers I'm using? If you use Catalyst 14.x - use version for Catalyst 14. If you use Catalyst 13.x - use version for Catalyst 13. Otherwise you can get a lot of strange errors and warnings. If you have some problems - describe system config in details, not just what error miner shows.
|
|
|
|
goofy73
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 65
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 10:47:09 AM |
|
finally I have Linux version finished and now I can work on further speed improvements, for some cards it's possible to get some additional speedup. Please look at 7950 cards, i have just 26cpm on asus 7950 (elpida memory, 3gb, 1050/1500) Thanks ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 10:58:42 AM |
|
finally I have Linux version finished and now I can work on further speed improvements, for some cards it's possible to get some additional speedup. Please look at 7950 cards, i have just 26cpm on asus 7950 (elpida memory, 3gb, 1050/1500) Thanks ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) What is 26cpm?
|
|
|
|
goofy73
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 65
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 11:31:28 AM |
|
sorry, CPD. Is it normal for this cards?
|
|
|
|
OrientA
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 11:36:56 AM |
|
sorry, CPD. Is it normal for this cards?
I do not understand.
|
|
|
|
hacko.bg
Newbie
Offline
Activity: 52
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 12:34:31 PM |
|
Here is the full log, when I start the miner: ----------- ./miner -u 47NHu3QopHC7sBrqraNJwqD9xXAWErAsDiEr3QKQcX3rFyKfGa2CPJcXsG9qEiYHNDT2nf6BwZPFMW3rxtES1MPwN1bCMTm -p x -a 0
имммммммммммммммммммммммммммммммммммммммммммммммммммммммммммммммм╩ ╨ Claymore CryptoNote GPU Miner v7.0 Beta ╨ xмммммммммммммммммммммммммммммммммммммммммммммммммммммммммммммммм╪
Cards available: 6 GPU #0: name: Tahiti, 2861 MB available, 28 units GPU #1: name: Tahiti, 2869 MB available, 28 units GPU #2: name: Tahiti, 2869 MB available, 28 units GPU #3: name: Tahiti, 2869 MB available, 28 units GPU #4: name: Tahiti, 2869 MB available, 28 units GPU #5: name: Tahiti, 2869 MB available, 28 units Total cards: 6
Catalyst 13.12 is REQUIRED for best performance and compatibility At least 16 GB of Virtual Memory is required for multi-GPU systems Make sure you defined GPU_MAX_ALLOC_PERCENT 100 Be careful with overclocking, use default clocks for first tests Initializing...
POOL version Internal error: Input OpenCL binary is not for the target! Internal error: Input OpenCL binary is not for the target! GPU 0: -a 1 mode selected GPU 1: -a 1 mode selected GPU 2: -a 1 mode selected GPU 3: -a 1 mode selected GPU 4: -a 1 mode selected GPU 5: -a 1 mode selected 4 pools specified. Stratum - connecting to 'mine.moneropool.org' <104.131.59.214> port 80 Stratum - connecting to 'mine.moneropool.org' <104.131.59.214> port 80 Stratum - Connected Stratum - Connected Pool Diff 10000 DevFee: Pool Diff 10000 GPU 0, GpuMiner k1a failed -48 GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory GPU 1, GpuMiner k1a failed -48 GPU 3, GpuMiner k1a failed -48 GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory GPU 5, GpuMiner k1a failed -48 GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory GPU 2, GpuMiner k1a failed -48 GPU 4, GpuMiner k1a failed -48 GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory 09/18/11-15:23:53 - New job received from mine.moneropool.org:80 Speed: 0 h/s, TotalHashes: 0K, DevHashes: 0K Mining time: 00:00
The other thing that is bugging me, that in the both archives uploaded, have identical sizes, and both give me the warning "Catalyst 13.12 is REQUIRED for best performance and compatibility", although the files in the archives are different. I use driver 14.4, set swap to 20GB, system memory is 2GB, 6 x 7950 cards. Operating system is Ubunty Server 14.04 LTS. Tried both versions, 13.12 and 14.6, both are giving me the error above.
|
|
|
|
infofront
Legendary
Offline
Activity: 2646
Merit: 2793
Shitcoin Minimalist
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 12:59:22 PM |
|
Will Windows users notice any performance improvement in 7.0?
|
|
|
|
OrientA
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 01:00:55 PM |
|
Will Windows users notice any performance improvement in 7.0?
According to Claymore, V7.0 is just the fan control for Windows users. After this version he will work on improvements for some cards.
|
|
|
|
serhio69
Newbie
Offline
Activity: 42
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2014, 02:00:16 PM |
|
I don't see Claymore CryptoNote GPU Miner v7.0 for Windows
|
|
|
|
|