Claymore's CryptoNote AMD GPU Miner v11.3

[seljak]

r9 270
13.12 = 370h/s
14.6 = 220h/s

?

[infofront]

r9 270
13.12 = 370h/s
14.6 = 220h/s

?

Are you using the correctly corresponding driver and miner versions?

[bensam123]

Is work being done to improve speeds on elpedia memory? Most people are stuck with this... a 20% difference is pretty huge.

[OrientA]

Is work being done to improve speeds on elpedia memory? Most people are stuck with this... a 20% difference is pretty huge.

You can search litecoin forum to find the mod bios.

[seljak]

r9 270
13.12 = 370h/s
14.6 = 220h/s

?

Are you using the correctly corresponding driver and miner versions?

Driver ver. 14.7, miner 7.0 14.6

[nsimmons]

I cannot see any different in speed between 7.0 and 6.1 for windows in fact the new one is slower

is there's any reason for this or does the new one has different settings?

My profits were literally cut in half with 7.0, ive noticed the dev fee is now hard coded so miner proxy doesnt work, but 5% doesnt explain the massive drop.  Im running 20khs so the difficulty is rather high and i only find a share every few minutes. I suspect when it switched back to my pool im hashing old work.
With 6.1 the pools estimated hash rate is 17-18kh/s, with 7.1 its around 8-10. I gave it 2 days.

Ive switched back to 6.1, I mined over 300 xmr with the dev fee on, thats plenty.

[Eastwind]

I cannot see any different in speed between 7.0 and 6.1 for windows in fact the new one is slower

is there's any reason for this or does the new one has different settings?

My profits were literally cut in half with 7.0, ive noticed the dev fee is now hard coded so miner proxy doesnt work, but 5% doesnt explain the massive drop.  Im running 20khs so the difficulty is rather high and i only find a share every few minutes. I suspect when it switched back to my pool im hashing old work.

Ive switched back to 6.1, I mined over 300 xmr with the dev fee on, thats plenty.

Which proxy do you use?

[nsimmons]

I cannot see any different in speed between 7.0 and 6.1 for windows in fact the new one is slower

is there's any reason for this or does the new one has different settings?

My profits were literally cut in half with 7.0, ive noticed the dev fee is now hard coded so miner proxy doesnt work, but 5% doesnt explain the massive drop.  Im running 20khs so the difficulty is rather high and i only find a share every few minutes. I suspect when it switched back to my pool im hashing old work.

Ive switched back to 6.1, I mined over 300 xmr with the dev fee on, thats plenty.

Which proxy do you use?

miner proxy, the one posted earlier in this thread

[bensam123]

A bios mods is not the answer to something no other algos since scrypt have had issues with (elpedia memory).

That aside, I didn't believe in the chinese mega-miner man, but it appears since v7.0 XMR world hashrate has increased by 20%. GG nix version.

I haven't noticed a decrease in income with v7 (relative to what I should be getting), I have however noticed a big increase in XMR world hashrate though.

[nsimmons]

A bios mods is not the answer to something no other algos since scrypt have had issues with (elpedia memory).

That aside, I didn't believe in the chinese mega-miner man, but it appears since v7.0 XMR world hashrate has increased by 20%. GG nix version.

I haven't noticed a decrease in income with v7 (relative to what I should be getting), I have however noticed a big increase in XMR world hashrate though.

Ive noticed the hashrate jumping back and forth from 20 to 25mhs the last few days. Which sucks because that 20% is my profit margin. This collapsing price isnt helping either

[daeminium]

2 sapphire r9 280x dual-x = 800 h/s with 14.6 amd drivers is good? 13.2 drivers is best?

[bensam123]

Yup, pretty sure you can blame that on the nix release and miners going to other profitable(?!?) coins, before jumping back as difficulty goes down.

I'm getting 400h/s with elpedia so that's not that far off.

[mega]

Hi there,

I'm trying to mine with gpu but I'm getting this error:



Could you guys help me?

[bensam123]

Make that 25% now. XMR is reaching x11 levels of profitability, which isn't profitable -_-

Neat, so no one should ever release Nix miners if they want mining to stay in the hands of the average joe.

[pgxz]

Hi,

Thanks a lot for the linux support miner is awesome,,

The first machine of test,, i use centos 6.5 X64 and have a hd 5770 http://www.sapphiretech.com/presentation/product/product_index.aspx?pid=305&lid=1

2 gb of memory, in the linux my hash is only 86 hs also in windows was 149hs when overclocked. i see too, when program starting, it only recognize 512MB of my graphic card,,, whnm it have 1024mb; see the output.

catalyst 14.6

GPU #0: name: Juniper, 512 MB available, 9 units

Now i try with catalyst 13.12 has the same.

i tried to help with something

BB thanks.

[Barborter]

eranbtc

For reference - I'm currently getting 325 h/s per 7850, 92 h/s for my 5870 with the current Claymore miner.

Which setting you use for 7850?
Thx

[DemocraticRepublicOfDave]

Hi there,

I'm trying to mine with gpu but I'm getting this error:



Could you guys help me?

Well, the error response suggests that the XMR wallet address you are using as a username is not recognised as a valid XMR wallet address by the server.  I suggest you check what you are supplying in the -u parameter.

Cheers

Dave

[Claymore]

Hi,

Thanks a lot for the linux support miner is awesome,,

The first machine of test,, i use centos 6.5 X64 and have a hd 5770 http://www.sapphiretech.com/presentation/product/product_index.aspx?pid=305&lid=1

2 gb of memory, in the linux my hash is only 86 hs also in windows was 149hs when overclocked. i see too, when program starting, it only recognize 512MB of my graphic card,,, whnm it have 1024mb; see the output.

catalyst 14.6

GPU #0: name: Juniper, 512 MB available, 9 units

Now i try with catalyst 13.12 has the same.

i tried to help with something

BB thanks.

Try to make OpenCL see all memory of your card. For Windows use "GPU_MAX_ALLOC_PERCENT", though I don't know if it works in Linux. Memory size is very important thing for good mining speed.

[arielbit]

For reference - I'm currently getting 325 h/s per 7850, 92 h/s for my 5870 with the current Claymore miner.

i'm getting 185 h/s with my 5830 (windows)...i think you should use -a 3 for your 5870 to increase h/s

[pgxz]

Hi,

Thanks a lot for the linux support miner is awesome,,

The first machine of test,, i use centos 6.5 X64 and have a hd 5770 http://www.sapphiretech.com/presentation/product/product_index.aspx?pid=305&lid=1

2 gb of memory, in the linux my hash is only 86 hs also in windows was 149hs when overclocked. i see too, when program starting, it only recognize 512MB of my graphic card,,, whnm it have 1024mb; see the output.

catalyst 14.6

GPU #0: name: Juniper, 512 MB available, 9 units

Now i try with catalyst 13.12 has the same.

i tried to help with something

BB thanks.

Try to make OpenCL see all memory of your card. For Windows use "GPU_MAX_ALLOC_PERCENT", though I don't know if it works in Linux. Memory size is very important thing for good mining speed
.

Thanks for reply,

im using centos x64 and use "export GPU_MAX_ALLOC_PERCENT=100" Before exec the comand of the miner. Ati Catalyst show 1024MB in the info.