patrike (OP)
Legendary
Offline
Activity: 3430
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 07, 2016, 08:49:44 PM |
|
One general question, maybe I am to blind to find it: Is there an "easy" way to switch between Pools or do I always have to adjust the "Managed Miners" settings (set mining software + pool)? It would be easier if one could change the pool via right-click on the miner (this is already possible) and the system automatically detects the required Mining Software (maybe assigned to the pool). Currently I set up a pool in the first step and then set pool + software under the "Managed Miners" part. I think it might be better to assign mining software to pool settings, or am I wrong? (Actually I think I AM wrong since you have more experience with this)
Thanks for your comments! If you switch between pools that can be handled by the same mining software, you can simply use the Switch Pool feature you are referring to. If you require multiple mining software types because of very different algorithms, you either need to make the change you describe, or simply add another Managed Miner with this configuration. Then you can stop one Managed Miner and start another one to switch between very different configurations. The pools can actually represent not only a single pool, but also a group of pools in different combinations. Each miner can have a unique set of pool settings, and it's mainly the miner, not the pool, where most operations are performed and statistics collected. This is the main reason why the miner entity is the main concept in Awesome Miner.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3430
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 07, 2016, 08:52:16 PM |
|
Awesome Miner development version 2.0.7 upgrades the Claymore's Zcash miner to version 2.0.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
solteykr
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 116
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 08, 2016, 01:24:56 AM |
|
No, it's a scam. I will report it although the post was made a long time ago - thanks for letting me know. You're welcome, and also one thing. of you can bring back bitcoin as mode of payment when I buy awesome miner. its much easier to pay with bitcoin that's why. hoping... ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
COINS.PH Share the gift of convenience by inviting your friends to Coins.ph Show your friends how easy it is to send money, buy load and pay bills. You both receive 50 PHP every time a friend signs up through your referral link and verifies ID and Selfie.
|
|
|
kilo17
Legendary
Offline
Activity: 980
Merit: 1001
aka "whocares"
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 08, 2016, 06:16:05 AM |
|
I continue to have some issues with getting some rigs online running. They come on and it says "Starting" but nothing happens.. In the past I was able to either switch to a Static IP or delete conflicting IP's but now I cannot.
I have looked at the logfile and it says "ChannelFactoryProvider: Channel faulted"
Any ideas on how I can get it going.
Thanks
BTW- it happens on Custom Software Uploads on some rigs
|
Bitcoin Will Only Succeed If The Community That Supports It Gets Support - Support Home Miners & Mining
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3430
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 08, 2016, 08:00:30 PM |
|
I continue to have some issues with getting some rigs online running. They come on and it says "Starting" but nothing happens.. In the past I was able to either switch to a Static IP or delete conflicting IP's but now I cannot.
I have looked at the logfile and it says "ChannelFactoryProvider: Channel faulted"
Any ideas on how I can get it going.
Thanks
BTW- it happens on Custom Software Uploads on some rigs
The "Channel faulted" is an indication of communication problem between the application and the remote miner. Are the miners on the same network or really far away? In the past the timeout for uploading software was really low, so it would fail if it would take more than 10 seconds. That was however changed to 60 seconds since version 2.0. Could this still be a problem, that the actual software transfer is too slow?
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
wolfen
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 09, 2016, 08:15:29 PM |
|
I have 3 autotune s9's. One is running 644 644 590 freqs on the gui.
Awesome miner shows 706 706 706. What do you suppose that means? Awesome miner not quite working with autotune s9's?
fans show 4500/0 on awesome, gui shows 2300/2300
Have 40 seats.
Awesome miner is just.... awesome.
|
For those about to block we salute you! AC->BTC
|
|
|
wolfen
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 09, 2016, 08:26:32 PM Last edit: November 10, 2016, 04:33:11 PM by wolfen |
|
How do you edit imported pools? I typo'ed a few. Do I have to export , edit, then import?
Cannot do any pool mods/import/enable/disable with the new antminer s9 autotune. (13.5TH)
|
For those about to block we salute you! AC->BTC
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3430
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 10, 2016, 06:05:40 PM |
|
I have 3 autotune s9's. One is running 644 644 590 freqs on the gui.
Awesome miner shows 706 706 706. What do you suppose that means? Awesome miner not quite working with autotune s9's?
fans show 4500/0 on awesome, gui shows 2300/2300
Have 40 seats.
Awesome miner is just.... awesome.
Hi, The latest batches has changed how some of the Antminer statistics are reported. There are some improvements made in the latest development version of Awesome Miner, and these changes will also be included in Awesome Miner 2.1 that soon will be released. If you see any inconsistency in the new version, please send me an API report from Awesome Miner (toolbar: Tools -> API Report)
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3430
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 10, 2016, 06:10:29 PM |
|
How do you edit imported pools? I typo'ed a few. Do I have to export , edit, then import?
Cannot do any pool mods/import/enable/disable with the new antminer s9 autotune. (13.5TH)
If you go to the Options dialog in Awesome Miner, and navigate to the Pool sections, you can add, edit and remove pools. Was it this feature you were looking for?
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
boki019
Newbie
Offline
Activity: 25
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 10, 2016, 10:47:10 PM |
|
How can i configure my AW M to calculate mu ZEC profit? I even don't have ZEC in COINS Am I doing something wrong here? http://prntscr.com/d5q3loThanks
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3430
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2016, 06:20:02 PM |
|
How can i configure my AW M to calculate mu ZEC profit? I even don't have ZEC in COINS Am I doing something wrong here? http://prntscr.com/d5q3loThe Zcash profit calculation requires the latest development version of Awesome Miner. But I will release all Zcash features as part of Awesome Miner 2.1 within a few minutes.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3430
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2016, 06:26:05 PM |
|
Awesome Miner Version 2.1- Zcash mining with Claymore's Zcash Miner 4.0. - 'Generic Miner' is a new type of miner for mining software that doesn't provide any API. Allows the mining process to be started and stopped from Awesome Miner, but no statistics will be provided. - Chip temperature for Antminer is now presented in ChipTemp1, ChipTemp2 and ChipTemp3 to better support latest batches. - Zcash coin added to statistics - X14 algorithm added to profit switcher - Claymore's Dual Ethereum Miner 7.3 ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fwww.awesomeminer.com%2Fimg%2Fguide%2Fzcash-01.png&t=665&c=rFF6L2RiGcy7FQ)
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
boki019
Newbie
Offline
Activity: 25
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2016, 06:40:16 PM |
|
Awesome Good job thanks
|
|
|
|
boysie
Newbie
Offline
Activity: 43
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2016, 08:27:08 PM Last edit: November 12, 2016, 07:54:36 AM by boysie |
|
what am I missing, when I setup a zcash pool the box to add in a wallet addr is blocked out.
Note: I found you make the RIG name the wallet plus Rig name
I find it odd you would make the worker name a property of the pool and not the miner.
by making it the pool property you can not name the rigs different workers and pass up to the pool which is silly, you are removing the basic options of the miner by doing this.
the Rig should have a worker Name and that's able to report up to the pool per rig and provide the wallet address on the pool config.
very odd
|
|
|
|
boysie
Newbie
Offline
Activity: 43
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 12, 2016, 07:46:05 AM |
|
I'm struggling with the following setup which is fairly basic and odd that its either not working or just pain to setup
AutoStart Miner after miner reboot.
Things tried: Rule Trigger: Detect offline + Detect miner API connection established Match all
Actions: Notification Wait 15s Start miner
Expected result : Miner starts after reboot, power loss, BSOD or any thing else that would cause the miner to reboot/power down and up again.
Actual result: miner never starts automatically
Manually running the rule results in the miner starting.
this basically makes the software almost totally useless....which is odd as it looks very good and worthy of the price tag, but I'm sure there is a simple explanation if you could respond please.
NOTE: the miner is using the agent installed and added as a full managed miner
Boysie
|
|
|
|
berron
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 12, 2016, 09:47:45 AM |
|
Hi patrike,
Is it explained in any place how the software choose the maximum profit pool/coin to mine? I have the impression it's not able to change the pool in an optimum way when I mine user defined X11 coins in my baikal. When mining only in multicoin pools (nicehas, zpool, ltcrabbit,...) it seems to work perfect instead.
Thanks
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3430
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 12, 2016, 02:39:55 PM |
|
what am I missing, when I setup a zcash pool the box to add in a wallet addr is blocked out.
Note: I found you make the RIG name the wallet plus Rig name
I find it odd you would make the worker name a property of the pool and not the miner.
by making it the pool property you can not name the rigs different workers and pass up to the pool which is silly, you are removing the basic options of the miner by doing this.
the Rig should have a worker Name and that's able to report up to the pool per rig and provide the wallet address on the pool config.
Hi, For most miner types (zcash just happens to be an exception right now), you have access to the 'Advanced' settings for the miner, where you specify a 'Worker suffix' that will be appended after the worker name. So if the pool is configured with a worker name 'MyWorker', and you give a miner the suffix '1' and another miner the suffix '2', the worker name being used for the miners will be MyWorker.1 and MyWorker.2. For the Zcash miner type that just was introduced, I do see that the Advanced section of the miner configuration is disabled, simply because most settings doesn't apply. What I will look at for next release is to move this setting to make it more visible and also accessible for zcash mining. Thanks for the feedback I'm struggling with the following setup which is fairly basic and odd that its either not working or just pain to setup
AutoStart Miner after miner reboot.
Things tried: Rule Trigger: Detect offline + Detect miner API connection established Match all
Actions: Notification Wait 15s Start miner
Expected result : Miner starts after reboot, power loss, BSOD or any thing else that would cause the miner to reboot/power down and up again.
Actual result: miner never starts automatically
Manually running the rule results in the miner starting.
First of all, there are two types of Remote feature. Remote Agent and Remote Service. More info here: http://www.awesomeminer.com/help/remoteagent.aspxThe option 'Autostart miner' should automatically start a Managed Miner as soon as the Remote Agent/Service is started. However, if you are using the Remote Agent option, you need to have automatic login configured in Windows, otherwise Remote Agent will not start, and the mining will not automatically start. You find information about this on the link above.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3430
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 12, 2016, 02:43:17 PM |
|
Hi patrike,
Is it explained in any place how the software choose the maximum profit pool/coin to mine? I have the impression it's not able to change the pool in an optimum way when I mine user defined X11 coins in my baikal. When mining only in multicoin pools (nicehas, zpool, ltcrabbit,...) it seems to work perfect instead.
Thanks
I had some discussion with another user about Baikal miner and I think the conculsion back then was that the Baikal miner didn't support chaning algorithm at the same time the pool was changed. Since then I've also seen discussions about updated firmware for Baikal that could address this. What happens if you manually try to do 'Change pool' from a X11 pool and to X13 pool using Awesome Miner, while the mining is running? Does that operation work on the Baikal?
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
berron
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 13, 2016, 11:03:21 AM |
|
Hi patrike,
Is it explained in any place how the software choose the maximum profit pool/coin to mine? I have the impression it's not able to change the pool in an optimum way when I mine user defined X11 coins in my baikal. When mining only in multicoin pools (nicehas, zpool, ltcrabbit,...) it seems to work perfect instead.
Thanks
I had some discussion with another user about Baikal miner and I think the conculsion back then was that the Baikal miner didn't support chaning algorithm at the same time the pool was changed. Since then I've also seen discussions about updated firmware for Baikal that could address this. What happens if you manually try to do 'Change pool' from a X11 pool and to X13 pool using Awesome Miner, while the mining is running? Does that operation work on the Baikal? Sorry, unfortunately, very very unfortunately, I cannot answer you that question. If any day I can, I will try and send answer to you immediately. https://bitcointalk.org/index.php?topic=1677686.0My question is easier, is there any parameter we could play with to try to force the software to check if the mined coin continues being the most profitable and change of pool if necesary (always mining he same algo X11 in this case)? I have a lot of shitcoins defined in the coin menu, and I have the impression when suddenly a coin diff increases a lot the software tends to continue mining it, at least if it is an user defined coin and in the coins page with the info supplied by the user the coin continues being the most profitable. Salute
|
|
|
|
wolfen
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 14, 2016, 04:55:01 PM |
|
Cannot remove/add pools with s9. Cannot restart with s9.
|
For those about to block we salute you! AC->BTC
|
|
|
|