[∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved!

[mhyde71]

thanks guys...
so how do know if like i do find block i have everything in place to receive benefit??

also
in dos window as i stated up above- i saw line that said found block at height xxxx.

is that not having found a block??

man i wish i took ss...but the scrolling had gone past it by time i saw it


so instead of trying luck, and wanted to get at least something....i could go to prohash and mine sha256 and get paid in NYC

[1713405059]

1713405059

[1713405059]

1713405059

[1713405059]

1713405059

[mylesrom]

thanks guys...
so how do know if like i do find block i have everything in place to receive benefit??

also
in dos window as i stated up above- i saw line that said found block at height xxxx.

is that not having found a block??

man i wish i took ss...but the scrolling had gone past it by time i saw it


so instead of trying luck, and wanted to get at least something....i could go to prohash and mine sha256 and get paid in NYC

Your best share must exceed the current difficulty which is 4,940,704,885,521.83, so you can see you are no where near that.  Your 6 million share is far, far away for the 5 trillion share required.

Also the btc will go directly into your wallet.

[-ck]

Good morning, people. I'm going to try your luck with you  , what I'm not sure about, is statistics. Apart from this humble window? How do you warn of the resolved block? In pool, or by my worker?

In your wallet.

[jcriss]

is there a stratum that more then 4k diff and less than 1m diff? Ck

[-ck]

is there a stratum that more then 4k diff and less than 1m diff? Ck

No, afraid not.

[jcriss]

DANG the V9 likes about a 32k diff

[wavelengthsf]

DANG the V9 likes about a 32k diff

That has no impact to your mining here. As long as its over 4k, you're good. The pool adjusts based on your share rate. However, that doesn't even matter here because the only difficulty that matters is if you find a block or not (which is much higher than 32k)

[tecnique]

Hi all,

I have pointed my miner to solo.ckpool.org respectively de.ckpool.org.

But as you can see in the screenhot the rejected value is extreme high:
https://ibb.co/e4yxvJ

If I point my miner to viaBTC (also in solo mode) the rejected value is zero:
https://ibb.co/mFJahy

Is this normal on ckpool.org or is there something I can do about it?

Thank you in advance!

[ComputerGenie]

Is this normal on ckpool.org or is there something I can do about it?

I can't even fathom how you have 900+ accepted shares in an hr and a best share of 0, so I'm thinking your miner is wonkey.

[tecnique]

If I check the Best Share on solo.ckpool.org, everything seems normal.

{
 "hashrate1m": "4.07T",
 "hashrate5m": "3.93T",
 "hashrate1hr": "2.58T",
 "hashrate1d": "3.26T",
 "hashrate7d": "1.33T",
 "lastshare": 1529162379,
 "workers": 1,
 "shares": 384240083,
 "bestshare": 3735381569.939564,
 "bestever": 3735381569,
 "worker": [
  {
   "workername": "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
   "hashrate1m": "4.07T",
   "hashrate5m": "3.93T",
   "hashrate1hr": "2.58T",
   "hashrate1d": "3.26T",
   "hashrate7d": "1.33T",
   "lastshare": 1529162379,
   "shares": 384240083,
   "bestshare": 3735381569.939564,
   "bestever": 3735381569
  }
 ]
}

[evade_57]

My V9 does exactly the same 

CKpool & CKSolo with the same results with a lot of rejected shares, about 33% to be exact, and no Best Share shown

Stats on the CK pools show that I'm producing however

Other pools can have next to no rejected shares, but still no Best Share

My miner in in the garage connected to an Amped wireless extender but I tried it indoors directly connected yo the router with the same results

I'm assuming the V9 has some quirks esp. at the price point

The V9 also came with the latest firmware from the factory

I'll stick with the CK pools however 

[evade_57]

For someone more adept than me and may mean nothing but why the warnings?

Last lines of the Kernel Log

Jun 15 23:24:11 (none) local0.notice cgminer[28431]: every_chain_restore_PIC16F1704_voltage_new
Jun 15 23:24:11 (none) local0.err cgminer[28431]: cgminer time error total_secs = 1529105051.660402 last_total_secs = 1.000000
Jun 15 23:24:12 (none) local0.warn cgminer[28431]: Pool 0 stratum+tcp://pool.ckpool.org:3333 alive, testing stability
Jun 15 23:24:12 (none) local0.warn cgminer[28431]: Switching to pool 0 stratum+tcp://pool.ckpool.org:3333
Jun 15 23:24:17 (none) local0.warn cgminer[28431]: API running in IP access mode on port 4028 (7)
Jun 15 23:24:32 (none) local0.notice cgminer[28431]: set_PIC16F1704_voltage_new ok, voltage = 0x80
Jun 15 23:24:32 (none) local0.notice cgminer[28431]: every_chain_restore_PIC16F1704_voltage_new Chain 0 voltage 128
Jun 15 23:24:33 (none) local0.notice cgminer[28431]: set_PIC16F1704_voltage_new ok, voltage = 0x80
Jun 15 23:24:33 (none) local0.notice cgminer[28431]: every_chain_restore_PIC16F1704_voltage_new Chain 1 voltage 128
Jun 15 23:24:33 (none) local0.notice cgminer[28431]: set_PIC16F1704_voltage_new ok, voltage = 0x80
Jun 15 23:24:33 (none) local0.notice cgminer[28431]: every_chain_restore_PIC16F1704_voltage_new Chain 2 voltage 128

Delete post if no value

[-ck]

Hi all,

I have pointed my miner to solo.ckpool.org respectively de.ckpool.org.

But as you can see in the screenhot the rejected value is extreme high:


If I point my miner to viaBTC (also in solo mode) the rejected value is zero:


Is this normal on ckpool.org or is there something I can do about it?

Thank you in advance!

The shitmain drivers are broken. They forked their driver off an ancient version of cgminer. My guess is they are confusing other messages from the pool as being rejected shares - if you can read the console output it will probably say something like rejected untracked share when it fact it's a ping from the pool. If your accepted share rate is fine then you can basically ignore the rejected shares.

[tecnique]

Hi all,

I have pointed my miner to solo.ckpool.org respectively de.ckpool.org.

But as you can see in the screenhot the rejected value is extreme high:
https://ibb.co/e4yxvJ

If I point my miner to viaBTC (also in solo mode) the rejected value is zero:
https://ibb.co/mFJahy

Is this normal on ckpool.org or is there something I can do about it?

Thank you in advance!

The shitmain drivers are broken. They forked their driver off an ancient version of cgminer. My guess is they are confusing other messages from the pool as being rejected shares - if you can read the console output it will probably say something like rejected untracked share when it fact it's a ping from the pool. If your accepted share rate is fine then you can basically ignore the rejected shares.

Ok, so I will just ignore the rejected ones.
Thank you for the information!

[jcriss]

My V9 does exactly the same 

CKpool & CKSolo with the same results with a lot of rejected shares, about 33% to be exact, and no Best Share shown

Stats on the CK pools show that I'm producing however

Other pools can have next to no rejected shares, but still no Best Share

My miner in in the garage connected to an Amped wireless extender but I tried it indoors directly connected yo the router with the same results

I'm assuming the V9 has some quirks esp. at the price point

The V9 also came with the latest firmware from the factory

I'll stick with the CK pools however 

WOW only 33% reject rate! trade ya

Pool   URL   User   Status   Diff   GetWorks   Priority   Accepted   Nonce#   DiffA#   DiffR#   DiffS#   Rejected   Discarded   Stale   LSDiff   LSTime
0   stratum+tcp://solo.ckpool.org:443   12k3f1gNV2#########th2TSnCtcLL9K6c   Alive   4K   201   0   2,489   0   9,956,000   9,372,000   0   2,343   2,611   0   4,000   0:00:05

[jcriss]

anyone know if i can put the s7 firmware into a v9? since everyone is claiming they a refurb. s7's anyways

[NotFuzzyWarm]

anyone know if i can put the s7 firmware into a v9? since everyone is claiming they a refurb. s7's anyways

And just *where* is this 'everyone' to be found?
The s7 and s9/T9/V9 use entirely different chips.

[ComputerGenie]

anyone know if i can put the s7 firmware into a v9? since everyone is claiming they a refurb. s7's anyways

And just *where* is this 'everyone' to be found?...

In all of the usual anti-Bitmain FUD places 

[madmartyk]

anyone know if i can put the s7 firmware into a v9? since everyone is claiming they a refurb. s7's anyways

And just *where* is this 'everyone' to be found?...

In all of the usual anti-Bitmain FUD places 

Dude, everyone knows they are just really overclocked s5's!! 

[userghost]

anyone know if i can put the s7 firmware into a v9? since everyone is claiming they a refurb. s7's anyways

And just *where* is this 'everyone' to be found?
The s7 and s9 use entirely different chips.

V9 not s9