dkaufman
Member
Offline
Activity: 84
Merit: 10
|
|
October 13, 2014, 01:36:12 PM |
|
I gave a remote accessed S4 a red hot go on a customised proxied p2pool and the best I could get on it was averaging 1.7TH.
That's about all I could get out my S4 at slush's pool too.
|
|
|
|
teeGUMES
Legendary
Offline
Activity: 1253
Merit: 1203
|
|
October 13, 2014, 01:43:49 PM |
|
The people that had their s4's shipped to Bitmain's hosting facilities should speak up about their experiences.. either fixes are being provided before the home miners' machines are being looked at, or this facility is already burned down to the ground.
|
|
|
|
dlowings
|
|
October 13, 2014, 01:50:28 PM |
|
S4 PSU issues ? Can Bitmain please advise the community as to what is up with the Power Supplies ? I just lost my first S4 and it was just installed less then 7 days ago . http://postimg.org/image/xp75t9jx1/http://postimg.org/image/3ulmdi42d/http://postimg.org/image/kjn29f0np/This is a real letdown because for every day I have to deal with a RMA or tech support I totally lose out on ROI ..
|
BTC donations welcome:- 1BrersvQubEKt4m2hBXDNvU1B4RiYe6J4i - Feel free to visit wiki.chainminer.com for free hardware listings, and mining info. - IRC on freenode #wiki.chainminer.com
|
|
|
dlowings
|
|
October 13, 2014, 01:55:18 PM |
|
The people that had their s4's shipped to Bitmain's hosting facilities should speak up about their experiences.. either fixes are being provided before the home miners' machines are being looked at, or this facility is already burned down to the ground.
After looking at my PSU I suspect they burnt that facility to the ground… LOL …… I know its not funny, but after looking at my less then 7 day old PSU and the black marks I'm glad I didn't burn my rack to the ground .
|
BTC donations welcome:- 1BrersvQubEKt4m2hBXDNvU1B4RiYe6J4i - Feel free to visit wiki.chainminer.com for free hardware listings, and mining info. - IRC on freenode #wiki.chainminer.com
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
|
October 13, 2014, 02:42:20 PM |
|
S4 PSU issues ? Can Bitmain please advise the community as to what is up with the Power Supplies ? I just lost my first S4 and it was just installed less then 7 days ago . http://postimg.org/image/xp75t9jx1/This is a real letdown because for every day I have to deal with a RMA or tech support I totally lose out on ROI .. that is an ugly job. IMO, buy a new PSU (or pair of PSUs), and power it from those for the meantime. Underclocking slightly should make it operable with an EVGA 1300
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1183
dogiecoin.com
|
|
October 13, 2014, 04:25:35 PM |
|
S4 PSU issues ?
Can Bitmain please advise the community as to what is up with the Power Supplies ? I just lost my first S4 and it was just installed less then 7 days ago .
Its late now in CN so I'll see what they say tomorrow. They're not made in house though, its a large OEM who have made mistakes - Bitmain are as upset as you are.
|
|
|
|
jimmothy
|
|
October 13, 2014, 04:30:25 PM |
|
S4 PSU issues ?
Can Bitmain please advise the community as to what is up with the Power Supplies ? I just lost my first S4 and it was just installed less then 7 days ago .
Its late now in CN so I'll see what they say tomorrow. They're not made in house though, its a large OEM who have made mistakes - Bitmain are as upset as you are. So are you finally going to admit that there are hardware issues? I don't know how people can think Bitmain mined using these machines when they have so many problems.
|
|
|
|
dlowings
|
|
October 13, 2014, 06:12:49 PM |
|
I just don't understand why they went with a PSU that could not be changed out with aAX1500 or something like that . I understand that the S4 is a TAD bit smaller then the S2 but it wasn't worth it ! I don't understand who made these decisions.. they had the bugs in the S2 worked out ! There was no reason to re invent the wheel here… I have a feeling they will drop support for the S4 like they did the S2 and say there were "production issues" so stick with our S3…. Its not that hard to make this rack mount option work ! The S2 was WORKING ! they worked out the shipping issues ! … all they had to do was STICK with their darn upgrade path .
|
BTC donations welcome:- 1BrersvQubEKt4m2hBXDNvU1B4RiYe6J4i - Feel free to visit wiki.chainminer.com for free hardware listings, and mining info. - IRC on freenode #wiki.chainminer.com
|
|
|
MyRig
Donator
Hero Member
Offline
Activity: 792
Merit: 510
support@myrig.com
|
|
October 13, 2014, 06:54:06 PM Last edit: October 13, 2014, 08:33:42 PM by BitmainWarranty |
|
Batch 2 S4 has new PSU. and all the future batches.
batch 1 with PSU problems are being replaced as we speak. (When RMA is needed)
If you have a DOA or defective PSU, PLEASE DO NOT OPEN the PSU case. It can be life threatening hazard inside the PSU. HIGH VOLTAGE.
and we are still wake!! Its late in China but staffs are still working around the clock as usual.
As information becomes available, we will provide more
Cgminer & Firmware part wise, tremendous supports from Ckolivas and Kano are placed into this, but please wait for the programmers to finish their work.
|
Antminer & DragonMint Repair E-mail: support@myrig.com T: @MyRig_com Return Address: MyRig 3700 Quebec Street, Unit 100-239, Denver, Colorado 80207, USA
|
|
|
Micky25
Legendary
Offline
Activity: 974
Merit: 1000
|
|
October 13, 2014, 06:55:37 PM |
|
any options to make any custom firmware for s2???
Wouldn't the S4 firmware work on the S2?
|
|
|
|
MyRig
Donator
Hero Member
Offline
Activity: 792
Merit: 510
support@myrig.com
|
|
October 13, 2014, 08:06:07 PM |
|
It's not suppose to work. S3 and S3+ firmware are compatible to each other but not S2 and S4. If you brick it, the replacement S2 firmware is available for download at http://www.bitmaintech.com site under Support. any options to make any custom firmware for s2???
Wouldn't the S4 firmware work on the S2? any options to make any custom firmware for s2???
Wouldn't the S4 firmware work on the S2?
|
Antminer & DragonMint Repair E-mail: support@myrig.com T: @MyRig_com Return Address: MyRig 3700 Quebec Street, Unit 100-239, Denver, Colorado 80207, USA
|
|
|
deleterase
Member
Offline
Activity: 60
Merit: 10
|
|
October 13, 2014, 08:46:53 PM |
|
any options to make any custom firmware for s2???
Wouldn't the S4 firmware work on the S2? The S4 firmware doesn't even work on the S4 - it'll be a brave man who tries it on the S2.........
|
|
|
|
Sandhog
Member
Offline
Activity: 76
Merit: 10
|
|
October 13, 2014, 08:56:43 PM |
|
Batch 2 S4 has new PSU. and all the future batches.
batch 1 with PSU problems are being replaced as we speak. (When RMA is needed)
If you have a DOA or defective PSU, PLEASE DO NOT OPEN the PSU case. It can be life threatening hazard inside the PSU. HIGH VOLTAGE.
and we are still wake!! Its late in China but staffs are still working around the clock as usual.
As information becomes available, we will provide more
Cgminer & Firmware part wise, tremendous supports from Ckolivas and Kano are placed into this, but please wait for the programmers to finish their work.
I was bit antsy about not getting on the S4 Batch 1 but am glad I didn't ordered. Although I'll be far behind on others in the mining, I rather see the proof of working miner before purchasing. I've learned my lesson with other miners and I'm happy with S1 and S3 which are work horses mining/heating my home. I'm going to keep an eye out for satisfied miners prior to ordering my S4s.
|
|
|
|
IYFTech
|
|
October 13, 2014, 09:10:02 PM |
|
any options to make any custom firmware for s2???
Wouldn't the S4 firmware work on the S2? The S4 firmware doesn't even work on the S4 - it'll be a brave man who tries it on the S2......... Besides, Bitmain have promised a new firmware release for the S2 any day week month now........
|
|
|
|
wasikidding
|
|
October 13, 2014, 10:38:40 PM |
|
Just an additional side note to frustrated S4 users Slush pool now allows for setting min. difficulty while creating a worker so very easy to add 2048 min diff to keep up with hash
|
BTC ADDY just in case you are my rich uncle lol 1KCQ4fXa3mWBvBsYRLmWY4QHqBa4ZYFdh6
|
|
|
dlowings
|
|
October 13, 2014, 10:45:02 PM |
|
Just an additional side note to frustrated S4 users Slush pool now allows for setting min. difficulty while creating a worker so very easy to add 2048 min diff to keep up with hash Works great… My two remaining S4 units now show the correct hash rate .
|
BTC donations welcome:- 1BrersvQubEKt4m2hBXDNvU1B4RiYe6J4i - Feel free to visit wiki.chainminer.com for free hardware listings, and mining info. - IRC on freenode #wiki.chainminer.com
|
|
|
tom04137
|
|
October 13, 2014, 10:45:40 PM |
|
Just an additional side note to frustrated S4 users Slush pool now allows for setting min. difficulty while creating a worker so very easy to add 2048 min diff to keep up with hash Yes, and it seems to work, slush pool now says 1900+GHs after about an hour running with diff set to 2048.
|
|
|
|
vipgelsi
Legendary
Offline
Activity: 1736
Merit: 1001
|
|
October 13, 2014, 10:50:05 PM |
|
Just an additional side note to frustrated S4 users Slush pool now allows for setting min. difficulty while creating a worker so very easy to add 2048 min diff to keep up with hash Yes, and it seems to work, slush pool now says 1900+GHs after about an hour running with diff set to 2048. I am also showing simular nunbers after a few hours.
|
|
|
|
dkaufman
Member
Offline
Activity: 84
Merit: 10
|
|
October 13, 2014, 10:53:32 PM |
|
Just an additional side note to frustrated S4 users Slush pool now allows for setting min. difficulty while creating a worker so very easy to add 2048 min diff to keep up with hash Thank goodness! Just switched my S4 back to slush's pool after hearing this. The payouts from my S4 at BTC Guild and GHash.io were only half what I'd expected -- it earned the same as my two S3's (1 TH) were earning on slush's pool... Guess I'm just spoiled :-) Will let you know how it goes. thanks! -dave ps: guess i got the only working PSU they shipped in batch one... so far so good. Well, house not burning down anyway (crosses fingers, hopes he didnt just jinx it!) Should I open it up and inspect it to look for signs of trouble? Where would i look? What would i look for? ...besides, y'know -- smoke and fire and melted stuff and such.
|
|
|
|
dlowings
|
|
October 13, 2014, 11:11:20 PM |
|
Just an additional side note to frustrated S4 users Slush pool now allows for setting min. difficulty while creating a worker so very easy to add 2048 min diff to keep up with hash Thank goodness! Just switched my S4 back to slush's pool after hearing this. The payouts from my S4 at BTC Guild and GHash.io were only half what I'd expected -- it earned the same as my two S3's (1 TH) were earning on slush's pool... Guess I'm just spoiled :-) Will let you know how it goes. thanks! -dave ps: guess i got the only working PSU they shipped in batch one... so far so good. Well, house not burning down anyway (crosses fingers, hopes he didnt just jinx it!) Should I open it up and inspect it to look for signs of trouble? Where would i look? What would i look for? ...besides, y'know -- smoke and fire and melted stuff and such. out of my three units, only one has went south so far and they are seven days in… From what I understand Bitmain will only replace PSU's that pop… Be very careful with these things they could very well burn down a home .. I posted pictures of my PSU and you can clearly see it had a significant arc of electricity .
|
BTC donations welcome:- 1BrersvQubEKt4m2hBXDNvU1B4RiYe6J4i - Feel free to visit wiki.chainminer.com for free hardware listings, and mining info. - IRC on freenode #wiki.chainminer.com
|
|
|
|