TerraMaster
|
 |
June 12, 2015, 06:53:23 PM |
|
I like the wallet right where it is now  EDIT: Its the portable feature this way
|
BTC:1DiR25SPo84sThzTATr27EZEQZLt6hv6tG
|
|
|
|
pallas
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
 |
June 12, 2015, 07:34:48 PM |
|
The wallet should be in the home folder, as with all the other coins. The program folder is another thing altogether. This is true for most windows and Linux programs in general, and how all the OSes I know are structured.
|
|
|
|
robinson5
|
 |
June 12, 2015, 09:21:42 PM |
|
We're building a platform called 'Sunfish' which will make sharing and tagging files a lot easier. The early version of that will be ready in July.
Sunfish is going to be an open source file tracker, anybody is going to be able to run their own sunfish server, and the GUI will have support for pointing at custom sunfish instances. Would it be possible to put sunfish into the wallet and build it using sia so it too is decentralized? Otherwise centralized file trackers could lead to possible censorship.
|
|
|
|
cwrmyy888
Member

Offline
Activity: 81
Merit: 10
|
 |
June 13, 2015, 01:32:40 AM |
|
I found a block today on an overclocked Asus GTX 970 (4GB memory). Running the newer miner with the -s 0.2 and -c 1 set it is reaching 450 MH/s.
When running this I noticed it only uses 70% GPU. Of course I am not using a "custom coded" miner so for kicks launched the same instance 3 times and the collective hashrate looks higher than if I was running individually 250/244/72 MH for each. 566 MH/s total and GPU use goes to 90% I am not sure if this is more effective or not but will run overnight and see what happens.
HI guy New bat file Set up Sia_GPU-Miner.exe -s 0.2 -c 1 Is that what? Thank you
|
|
|
|
Cobra
|
 |
June 13, 2015, 02:03:32 AM |
|
I found a block today on an overclocked Asus GTX 970 (4GB memory). Running the newer miner with the -s 0.2 and -c 1 set it is reaching 450 MH/s.
When running this I noticed it only uses 70% GPU. Of course I am not using a "custom coded" miner so for kicks launched the same instance 3 times and the collective hashrate looks higher than if I was running individually 250/244/72 MH for each. 566 MH/s total and GPU use goes to 90% I am not sure if this is more effective or not but will run overnight and see what happens.
HI guy New bat file Set up Sia_GPU-Miner.exe -s 0.2 -c 1 Is that what? Thank you Yes, that is what I am using. Nice work Wolf on the optimization. If it does not work you may be using the wrong exe, the one I have is named gpu-miner.exe I think you may have a different version which does not support those options. Not sure which page of this thread I downloaded it on.
|
|
|
|
cwrmyy888
Member

Offline
Activity: 81
Merit: 10
|
 |
June 13, 2015, 02:14:23 AM |
|
I found a block today on an overclocked Asus GTX 970 (4GB memory). Running the newer miner with the -s 0.2 and -c 1 set it is reaching 450 MH/s.
When running this I noticed it only uses 70% GPU. Of course I am not using a "custom coded" miner so for kicks launched the same instance 3 times and the collective hashrate looks higher than if I was running individually 250/244/72 MH for each. 566 MH/s total and GPU use goes to 90% I am not sure if this is more effective or not but will run overnight and see what happens.
HI guy New bat file Set up Sia_GPU-Miner.exe -s 0.2 -c 1 Is that what? Thank you Yes, that is what I am using. Nice work Wolf on the optimization. If it does not work you may be using the wrong exe, the one I have is named gpu-miner.exe I think you may have a different version which does not support those options. Not sure which page of this thread I downloaded it on. Thank you for your reply. I set up, but did not change r9 290x 120MH/s Are your GPU miners downloaded there?
|
|
|
|
Roozy
Newbie
Offline
Activity: 43
Merit: 0
|
 |
June 13, 2015, 02:24:13 AM |
|
Can someone please post a link to the latest gpu miner? I know there's this one that was posted by Wolf https://github.com/wolf9466/Sia-GPU-Minerbut i'm using windows and I can't "make" that file so I need one that's a ready to go exe.
|
|
|
|
cwrmyy888
Member

Offline
Activity: 81
Merit: 10
|
 |
June 13, 2015, 02:32:11 AM |
|
Can someone please post a link to the latest gpu miner? I know there's this one that was posted by Wolf https://github.com/wolf9466/Sia-GPU-Minerbut i'm using windows and I can't "make" that file so I need one that's a ready to go exe. yes! we Need
|
|
|
|
nemo1618
Newbie
Offline
Activity: 30
Merit: 0
|
 |
June 13, 2015, 02:34:33 AM |
|
We're building a platform called 'Sunfish' which will make sharing and tagging files a lot easier. The early version of that will be ready in July.
Sunfish is going to be an open source file tracker, anybody is going to be able to run their own sunfish server, and the GUI will have support for pointing at custom sunfish instances. Would it be possible to put sunfish into the wallet and build it using sia so it too is decentralized? Otherwise centralized file trackers could lead to possible censorship. It's not hard to envision a DHT where you ask your peers for the file with a given hash, etc. But as of now there are no plans to add such functionality. Separate servers are nice because they can be completely separate from Sia, whereas a DHT would essentially require that we force peers to "opt-in" by default, or else risk low participation.
|
|
|
|
cwrmyy888
Member

Offline
Activity: 81
Merit: 10
|
 |
June 13, 2015, 05:24:10 AM |
|
I found a block today on an overclocked Asus GTX 970 (4GB memory). Running the newer miner with the -s 0.2 and -c 1 set it is reaching 450 MH/s.
When running this I noticed it only uses 70% GPU. Of course I am not using a "custom coded" miner so for kicks launched the same instance 3 times and the collective hashrate looks higher than if I was running individually 250/244/72 MH for each. 566 MH/s total and GPU use goes to 90% I am not sure if this is more effective or not but will run overnight and see what happens.
HI guy New bat file Set up Sia_GPU-Miner.exe -s 0.2 -c 1 Is that what? Thank you Yes, that is what I am using. Nice work Wolf on the optimization. If it does not work you may be using the wrong exe, the one I have is named gpu-miner.exe I think you may have a different version which does not support those options. Not sure which page of this thread I downloaded it on. If you mean the actual rewrite I did and posted about earlier, thanks. If you mean what I have on GitHub, that's not an optimization, it's how you properly get the list of OpenCL platforms on a system, and the list of GPU devices in a selected platform. Besides that, I added options to give the user direct control over intensity, plus the number of kernel enqueues before stopping to fetch new work and print hashrate. With those options available, it should be simple to mine on all devices on a system, and probably get a little higher hash out of them, simply because you can tune the intensity. That GitHub is here: https://github.com/wolf9466/Sia-GPU-MinerHello wolf0 A compiled version? I tried to compile the VC6.0 without success
|
|
|
|
BitcoinForumator
Legendary
Offline
Activity: 1120
Merit: 1000
|
 |
June 13, 2015, 07:47:47 AM Last edit: June 13, 2015, 08:15:16 AM by BitcoinForumator |
|
I found a block today on an overclocked Asus GTX 970 (4GB memory). Running the newer miner with the -s 0.2 and -c 1 set it is reaching 450 MH/s.
When running this I noticed it only uses 70% GPU. Of course I am not using a "custom coded" miner so for kicks launched the same instance 3 times and the collective hashrate looks higher than if I was running individually 250/244/72 MH for each. 566 MH/s total and GPU use goes to 90% I am not sure if this is more effective or not but will run overnight and see what happens.
HI guy New bat file Set up Sia_GPU-Miner.exe -s 0.2 -c 1 Is that what? Thank you Yes, that is what I am using. Nice work Wolf on the optimization. If it does not work you may be using the wrong exe, the one I have is named gpu-miner.exe I think you may have a different version which does not support those options. Not sure which page of this thread I downloaded it on. If you mean the actual rewrite I did and posted about earlier, thanks. If you mean what I have on GitHub, that's not an optimization, it's how you properly get the list of OpenCL platforms on a system, and the list of GPU devices in a selected platform. Besides that, I added options to give the user direct control over intensity, plus the number of kernel enqueues before stopping to fetch new work and print hashrate. With those options available, it should be simple to mine on all devices on a system, and probably get a little higher hash out of them, simply because you can tune the intensity. That GitHub is here: https://github.com/wolf9466/Sia-GPU-MinerHello wolf0 A compiled version? I tried to compile the VC6.0 without success Don't make me do stuff! Fine, done. Unlike before, where I compiled the Win64 binaries for the Sia team from their git without looking too closely at it, I've looked this over and contributed code - therefore I will sign the binaries. Key ID is in my signature. https://ottrbutt.com/Sia/Sia-GPU-Miner-Wolf-Public-06132015.ziphttps://ottrbutt.com/Sia/Sia-GPU-Miner-Wolf-Public-06132015.zip.sigTwo files are in the archive: the miner executable and a README, which is also on GitHub. Read it. Seriously; I won't answer questions that are already answered there.  Seems to be working, finally I should say. 39MH/s is low right? (radeon 7970) But at least it's something  So thanks Wolf0
|
|
|
|
mishax1
Legendary
Offline
Activity: 2898
Merit: 1017
|
 |
June 13, 2015, 08:26:07 AM |
|
Anyone running a 280X or similar and getting more than 110mhs on windows ?
|
|
|
|
cwrmyy888
Member

Offline
Activity: 81
Merit: 10
|
 |
June 13, 2015, 08:37:10 AM |
|
I found a block today on an overclocked Asus GTX 970 (4GB memory). Running the newer miner with the -s 0.2 and -c 1 set it is reaching 450 MH/s.
When running this I noticed it only uses 70% GPU. Of course I am not using a "custom coded" miner so for kicks launched the same instance 3 times and the collective hashrate looks higher than if I was running individually 250/244/72 MH for each. 566 MH/s total and GPU use goes to 90% I am not sure if this is more effective or not but will run overnight and see what happens.
HI guy New bat file Set up Sia_GPU-Miner.exe -s 0.2 -c 1 Is that what? Thank you Yes, that is what I am using. Nice work Wolf on the optimization. If it does not work you may be using the wrong exe, the one I have is named gpu-miner.exe I think you may have a different version which does not support those options. Not sure which page of this thread I downloaded it on. If you mean the actual rewrite I did and posted about earlier, thanks. If you mean what I have on GitHub, that's not an optimization, it's how you properly get the list of OpenCL platforms on a system, and the list of GPU devices in a selected platform. Besides that, I added options to give the user direct control over intensity, plus the number of kernel enqueues before stopping to fetch new work and print hashrate. With those options available, it should be simple to mine on all devices on a system, and probably get a little higher hash out of them, simply because you can tune the intensity. That GitHub is here: https://github.com/wolf9466/Sia-GPU-MinerHello wolf0 A compiled version? I tried to compile the VC6.0 without success Don't make me do stuff! Fine, done. Unlike before, where I compiled the Win64 binaries for the Sia team from their git without looking too closely at it, I've looked this over and contributed code - therefore I will sign the binaries. Key ID is in my signature. https://ottrbutt.com/Sia/Sia-GPU-Miner-Wolf-Public-06132015.ziphttps://ottrbutt.com/Sia/Sia-GPU-Miner-Wolf-Public-06132015.zip.sigTwo files are in the archive: the miner executable and a README, which is also on GitHub. Read it. Seriously; I won't answer questions that are already answered there.  Seems to be working, finally I should say. 39MH/s is low right? (radeon 7970) But at least it's something  So thanks Wolf0 Even with no modified hashing, it should go way higher than that. The default intensity is now set quite low as to reduce the chances of crashing on a lower-end GPU if someone tries it out with the default parameters. The intensity option is there, and I expect you to use it - which is why I could lower the default. Just keep raising it by maybe 2 each time until hashrate stops improving, slows down, or the hashrate counter takes too long to update. If you've seemed to find a good intensity for your card, but hashrate is still printing multiple times per second, then use the -C option (cycles per iteration), to make the GPU do more work in between the hashrate printout and new work fetch. Nothing has changed. r9 290x 120MH/s Everyone is digging with a speed of 10 times. This is not fair
|
|
|
|
elpis
Member

Offline
Activity: 64
Merit: 10
|
 |
June 13, 2015, 08:41:02 AM |
|
Why not start?  
|
|
|
|
BitcoinForumator
Legendary
Offline
Activity: 1120
Merit: 1000
|
 |
June 13, 2015, 08:43:59 AM |
|
Why not start?   I think you need all the correct versions - latest Client, latest Siad and siac and the Wolf0's miner. I had the same issue before. @Wolf0 - can you pinpoint where the intensity setting is in the .cl file? I have no clue (it's almost like reading chinese looking at it). Thanks....
|
|
|
|
BitcoinForumator
Legendary
Offline
Activity: 1120
Merit: 1000
|
 |
June 13, 2015, 09:02:44 AM |
|
-I22 seems about right but still goes only to 50MH. I'll try the other thing you recommended.
-C3 (fast refresh), -C50 slower refresh but same speed
|
|
|
|
elpis
Member

Offline
Activity: 64
Merit: 10
|
 |
June 13, 2015, 09:58:56 AM |
|
-I22 seems about right but still goes only to 50MH. I'll try the other thing you recommended.
-C3 (fast refresh), -C50 slower refresh but same speed
I have only to 50MH(( On getting old miner 120 MH on 280x 1050/1500
|
|
|
|
Rabinovitch
Legendary
Offline
Activity: 2030
Merit: 1076
A humble Siberian miner
|
 |
June 13, 2015, 11:28:56 AM |
|
I think you need all the correct versions - latest Client, latest Siad and siac and the Wolf0's miner. I had the same issue before.
Here it is with all latest things (AMD driver 15.x, Sia 3.3.1 and Wolf0's miner - https://ottrbutt.com/Sia/Sia-GPU-Miner-Wolf-Public-06132015.zip): 
|
|
|
|
d34g13
|
 |
June 13, 2015, 11:59:25 AM Last edit: June 13, 2015, 12:43:35 PM by d34g13 |
|
Still selling 20m for 6 btc  looks like hardly anyone is selling so many coins anymore also the hashrate has almost trippled and the difficulty will increase soon again as well Hash rate (last 1000 blocks) 84.158834GH/s Hash rate (last 100 blocks) 164.673660GH/s Hash rate (last 30 blocks) 184.025272GH/s Hash rate (last 10 blocks) 214.257458GH/s
|
|
|
|
|