Bitcoin Forum
May 25, 2019, 10:25:37 PM *
News: Latest Bitcoin Core release: 0.18.0 [Torrent] (New!)
 
   Home   Help Search Login Register More  
Pages: « 1 ... 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 [1098] 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 ... 1309 »
  Print  
Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v14.5 (Windows/Linux)  (Read 6325190 times)
Omg9500
Newbie
*
Offline Offline

Activity: 112
Merit: 0


View Profile
March 11, 2018, 11:27:19 PM
 #21941

The current AMD drivers in compute mode are optimized for Windows 10 v1709 FCU. Those are the fastest drivers to use with RX 570/580 cards. The only reason to use the blockchain drivers on Windows v1709 with RX 570/580's is some old miners like SGminer don't work with the latest drivers.
In my experience, in what mining is concerned, the Beta Blockchain drivers are identical to all new drivers. No speed difference whatsoever.
If someone has proof otherwise please come forward.

Beta blockchain drivers have a limit of upto 8 GPUs. New drivers don't... Speedwise maybe no difference so what is the harm of using newer drivers?

Installed new drivers and afterburner doesn't work. Went back to blockchain drivers. 

That is why I use overdriventool instead of MSI afterburner... https://forums.guru3d.com/threads/overdriventool-tool-for-amd-gpus.416116/
1558823137
Hero Member
*
Offline Offline

Posts: 1558823137

View Profile Personal Message (Offline)

Ignore
1558823137
Reply with quote  #2

1558823137
Report to moderator
1558823137
Hero Member
*
Offline Offline

Posts: 1558823137

View Profile Personal Message (Offline)

Ignore
1558823137
Reply with quote  #2

1558823137
Report to moderator
1558823137
Hero Member
*
Offline Offline

Posts: 1558823137

View Profile Personal Message (Offline)

Ignore
1558823137
Reply with quote  #2

1558823137
Report to moderator
PLAY OVER 3000 GAMES
LIGHTNING FAST WITHDRAWALS
PLAY NOW
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1558823137
Hero Member
*
Offline Offline

Posts: 1558823137

View Profile Personal Message (Offline)

Ignore
1558823137
Reply with quote  #2

1558823137
Report to moderator
1558823137
Hero Member
*
Offline Offline

Posts: 1558823137

View Profile Personal Message (Offline)

Ignore
1558823137
Reply with quote  #2

1558823137
Report to moderator
1558823137
Hero Member
*
Offline Offline

Posts: 1558823137

View Profile Personal Message (Offline)

Ignore
1558823137
Reply with quote  #2

1558823137
Report to moderator
joaocha
Full Member
***
Offline Offline

Activity: 255
Merit: 100


View Profile
March 12, 2018, 12:20:33 AM
Last edit: March 12, 2018, 03:48:52 AM by joaocha
 #21942

Claymore, after 11.2 and 11.3 update, some of my rigs that have 10 gpus, (all of them rx580 4gb and 8gb), fail to start the miner,

11.1 works fine



Maybe its memory related? my rigs have 4gb ram memory

Quote
04:41:55:878    f843d740        Platform: Linux
04:41:55:993    f843d740        start building OpenCL program for GPU 0...
04:41:56:092    f843d740        done
04:41:56:299    f843d740        start building OpenCL program for GPU 1...
04:41:56:423    f843d740        done
04:41:56:629    f843d740        start building OpenCL program for GPU 2...
04:41:56:753    f843d740        done
04:41:56:960    f843d740        start building OpenCL program for GPU 3...
04:41:57:084    f843d740        done
04:41:57:290    f843d740        start building OpenCL program for GPU 4...
04:41:57:413    f843d740        done
04:41:57:620    f843d740        start building OpenCL program for GPU 5...
04:41:57:743    f843d740        done
04:41:57:945    f843d740        start building OpenCL program for GPU 6...
04:41:58:054    f843d740        done
04:41:58:256    f843d740        start building OpenCL program for GPU 7...
04:41:58:355    f843d740        done
04:41:58:561    f843d740        start building OpenCL program for GPU 8...
04:41:58:684    f843d740        done
04:41:58:890    f843d740        start building OpenCL program for GPU 9...
04:41:59:015    f843d740        done
04:41:59:285    f843d740        GPU #0: algorithm ASM
04:41:59:342    f843d740        GPU #1: algorithm ASM
04:41:59:401    f843d740        GPU #2: algorithm ASM
04:41:59:459    f843d740        GPU #3: algorithm ASM
04:41:59:517    f843d740        GPU #4: algorithm ASM
04:41:59:575    f843d740        GPU #5: algorithm ASM
04:41:59:633    f843d740        GPU #6: algorithm ASM
04:41:59:697    f843d740        GPU #7: algorithm ASM
04:42:19:948    f843d740        GPU #8: algorithm ASM

after this the miner is killed and pc restart
andrenym00
Newbie
*
Offline Offline

Activity: 26
Merit: 0


View Profile
March 12, 2018, 12:56:18 AM
 #21943

Is it normal to get hashrate drop after 10-20 hashes? Sometimes it will go much longer.  I thought I fixed it when I changed pcie latency timer to higher number.
groovytechno
Newbie
*
Offline Offline

Activity: 40
Merit: 0


View Profile
March 12, 2018, 01:16:21 AM
 #21944

The current AMD drivers in compute mode are optimized for Windows 10 v1709 FCU. Those are the fastest drivers to use with RX 570/580 cards. The only reason to use the blockchain drivers on Windows v1709 with RX 570/580's is some old miners like SGminer don't work with the latest drivers.


Also, Afterburner doesn't work with the Adrenaline drivers.  Unless someone can enlighten me otherwise.
Vann
Hero Member
*****
Offline Offline

Activity: 714
Merit: 588


View Profile
March 12, 2018, 02:11:14 AM
 #21945

Afterburner will only work with up to 3 cards with the Adrenaline drivers. You can set the overclock/undervolt/fan settings directly in the Claymore config or use OverdriveNtool to create profiles as explained on www.mining.help.
big al
Member
**
Offline Offline

Activity: 140
Merit: 10


View Profile
March 12, 2018, 04:41:43 AM
 #21946

In 24 hours I'm getting 0 rejected eth shares and about 22 incorrect per card. 30 rejected decred per card. 0 memory errors. On 11.3. Is this acceptable?
KGV
Newbie
*
Offline Offline

Activity: 53
Merit: 0


View Profile
March 12, 2018, 05:24:08 AM
 #21947

In 24 hours I'm getting 0 rejected eth shares and about 22 incorrect per card. 30 rejected decred per card. 0 memory errors. On 11.3. Is this acceptable?
yes
nirbo
Newbie
*
Offline Offline

Activity: 3
Merit: 0


View Profile
March 12, 2018, 05:59:30 AM
 #21948

Hey everyone,

I am attempting to use the ETH miner v11.3 with NVIDIA V100 GPUs, however I keep getting the following error:

Code:
GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, Calc DAG failed!

I'm using Ubuntu 16.04 and I've tried with both CUDA 9.0 and 9.1

@Claymore, would you please advise?
How do I get this to work? to my understanding, v11 of the miner is supposed to support CUDA 9.1.


Thanks.


Does anyone happen to know how to solve this issue?


Thanks.
Munka9
Newbie
*
Offline Offline

Activity: 30
Merit: 0


View Profile
March 12, 2018, 06:09:28 AM
 #21949

In 24 hours I'm getting 0 rejected eth shares and about 22 incorrect per card. 30 rejected decred per card. 0 memory errors. On 11.3. Is this acceptable?
yes

It is acceptable but 22 incorrect is about 4%. You would have a higher profit slowing the cards down and eliminating those errors. A 29mhs card with 0% errors has higher profit than a 30mhs card with 4% errors.

I'd start with lowering each mclock by just 20Mhz and see if that clears up the error rate.

Of my 17 cards I tolerate an incorrect shares rate of 1% on one card that I can't shake no matter what timings I use and 0.5% on 2 others. The rest can all go weeks without an incorrect share.
big al
Member
**
Offline Offline

Activity: 140
Merit: 10


View Profile
March 12, 2018, 06:38:27 AM
Last edit: March 12, 2018, 06:56:50 AM by big al
 #21950

So incorrect are just as bad as rejected?  Wasted time and power. Undecided

(Edit: I did find where someone mentioned incorrect share is local, rejected share is pool and both are equally bad)

I'm going to revert to 10.6. I could run the cards faster with almost no incorrect shares.  Huh
preda
Sr. Member
****
Offline Offline

Activity: 588
Merit: 250


View Profile
March 12, 2018, 07:21:43 AM
 #21951

i found claymore now very staable and works very good with my amd rigs, so far i had drop hashrate and since i installed 11 version all works perfect, actually dual mining with eth+kekkac is a good option


 '
STC.
║║
║║
[/b]
☑ NO ICO ● ▬▬▬▬▬ ☑ AIRDROPS ● ▬▬▬▬▬ ☑ PoS ● ▬▬▬▬ ☑ PoW ●

mpx1368
Newbie
*
Offline Offline

Activity: 3
Merit: 0


View Profile
March 12, 2018, 07:34:21 AM
 #21952

hi
i live in iran and in ver 11.1 and 11.2 cannot connect to devfee server address ethermine.org:5555 and gpu hashrare decrease no any way to change devfee server address to ethermine.org:14444
ildotoress
Newbie
*
Offline Offline

Activity: 59
Merit: 0


View Profile
March 12, 2018, 07:53:17 AM
 #21953

The current AMD drivers in compute mode are optimized for Windows 10 v1709 FCU. Those are the fastest drivers to use with RX 570/580 cards. The only reason to use the blockchain drivers on Windows v1709 with RX 570/580's is some old miners like SGminer don't work with the latest drivers.
In my experience, in what mining is concerned, the Beta Blockchain drivers are identical to all new drivers. No speed difference whatsoever.
If someone has proof otherwise please come forward.

Beta blockchain drivers have a limit of upto 8 GPUs. New drivers don't... Speedwise maybe no difference so what is the harm of using newer drivers?

Installed new drivers and afterburner doesn't work. Went back to blockchain drivers.  

That is why I use overdriventool instead of MSI afterburner... https://forums.guru3d.com/threads/overdriventool-tool-for-amd-gpus.416116/
But it doesn't have the graphical (mathematical) function of rpm setup which only AB has.
DiHunter
Member
**
Offline Offline

Activity: 137
Merit: 10


View Profile
March 12, 2018, 08:32:16 AM
Last edit: March 12, 2018, 09:18:07 AM by DiHunter
 #21954

Hello.
Does anybody have Sapphire rx 550 4gb? What is the hashrate with 11.3 version on ETH?
Do your cards find more shares now with increased hashrate on 11.3 version?
Omg9500
Newbie
*
Offline Offline

Activity: 112
Merit: 0


View Profile
March 12, 2018, 08:45:26 AM
 #21955

The current AMD drivers in compute mode are optimized for Windows 10 v1709 FCU. Those are the fastest drivers to use with RX 570/580 cards. The only reason to use the blockchain drivers on Windows v1709 with RX 570/580's is some old miners like SGminer don't work with the latest drivers.
In my experience, in what mining is concerned, the Beta Blockchain drivers are identical to all new drivers. No speed difference whatsoever.
If someone has proof otherwise please come forward.

Beta blockchain drivers have a limit of upto 8 GPUs. New drivers don't... Speedwise maybe no difference so what is the harm of using newer drivers?

Installed new drivers and afterburner doesn't work. Went back to blockchain drivers.  

That is why I use overdriventool instead of MSI afterburner... https://forums.guru3d.com/threads/overdriventool-tool-for-amd-gpus.416116/
But it doesn't have the graphical (mathematical) function of rpm setup which only AB has.

Then stay with AB and whatever you want. I can't because I have 13 cards in my rig which works only with new drivers and AB does not function with new drivers. I can only say Claymore 11.3 with latest drivers and overdriventool works fine with me and gives me 399 mh/s.
Ossidalm
Newbie
*
Offline Offline

Activity: 63
Merit: 0


View Profile
March 12, 2018, 09:29:49 AM
 #21956

In 24 hours I'm getting 0 rejected eth shares and about 22 incorrect per card. 30 rejected decred per card. 0 memory errors. On 11.3. Is this acceptable?
yes

It is acceptable but 22 incorrect is about 4%. You would have a higher profit slowing the cards down and eliminating those errors. A 29mhs card with 0% errors has higher profit than a 30mhs card with 4% errors.

I'd start with lowering each mclock by just 20Mhz and see if that clears up the error rate.

Of my 17 cards I tolerate an incorrect shares rate of 1% on one card that I can't shake no matter what timings I use and 0.5% on 2 others. The rest can all go weeks without an incorrect share.

That is right. It is better to reduce the clock.
project13et
Newbie
*
Offline Offline

Activity: 37
Merit: 0


View Profile
March 12, 2018, 09:47:57 AM
 #21957




Can you please include reboot.bat in the archives ? For miners that use more rigs is very hard to add the file on each updated version.
Thanks,
Claymore
Donator
Legendary
*
Offline Offline

Activity: 1498
Merit: 1295

Miners developer


View Profile
March 12, 2018, 10:21:36 AM
 #21958

Can you please include reboot.bat in the archives ? For miners that use more rigs is very hard to add the file on each updated version.
Thanks,

Actions that you want to do in this file can be different. How do you update miners?

Please read Readme and FAQ in the first post of this thread before asking any questions, probably the answer is already there.
List of my miners: https://bitcointalk.org/index.php?topic=3019607
RYXES
Member
**
Offline Offline

Activity: 140
Merit: 10

Merit me or don't.


View Profile
March 12, 2018, 10:56:59 AM
 #21959




Can you please include reboot.bat in the archives ? For miners that use more rigs is very hard to add the file on each updated version.
Thanks,


Do you mean a force update and reboot?

Merit me or don't.
R0land
Jr. Member
*
Offline Offline

Activity: 207
Merit: 3


View Profile
March 12, 2018, 12:03:33 PM
Merited by christiano88 (1)
 #21960

Hello.
Does anybody have Sapphire rx 550 4gb? What is the hashrate with 11.3 version on ETH?
Do your cards find more shares now with increased hashrate on 11.3 version?
I have a couple of this cards, all with Micron RAM and modded BIOS.
The hashrate is ~13 Mh/s @23W up to ~14 Mh/s @30W, it depends on your gpu-core and RAM speed/voltage settings.
Pages: « 1 ... 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 [1098] 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 ... 1309 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!