big al
Member
Offline
Activity: 140
Merit: 10
|
|
March 10, 2018, 10:27:34 PM |
|
I have noticed a 2% increase going from 10.6 to 11.2 then another 0.5% on top going from 11.2 to 11.3/
Eth + Dcr
|
|
|
|
Spill
Jr. Member
Offline
Activity: 94
Merit: 5
|
|
March 10, 2018, 10:32:18 PM |
|
Nice job Claymore this version performs the same as you're competition. Seems very stable like 11.0 You still have me with the duel mining. I just hope the bitmain eth ascis are just a rumor.
|
|
|
|
ivanpop
Newbie
Offline
Activity: 62
Merit: 0
|
|
March 10, 2018, 10:36:45 PM |
|
I have noticed a 2% increase going from 10.6 to 11.2 then another 0.5% on top going from 11.2 to 11.3/
Eth + Dcr Decred mining with GPUs is dead but whatever, go ahead.
|
|
|
|
big al
Member
Offline
Activity: 140
Merit: 10
|
|
March 10, 2018, 11:14:47 PM |
|
|
|
|
|
xlstefan
Newbie
Offline
Activity: 1
Merit: 0
|
|
March 11, 2018, 12:05:06 AM |
|
v11.3:
- added automatic detection of best -dcri values in ASM ETH-only mode if -dcri option is missed. Press "s" key to see current values, you can also press "z" key to restart detection. - improved support for systems with many GPUs (eight and more) and slow CPU: much less CPU load, EthMan works fine now. - added assembler kernel for RX550 card. This card is not good for dual mining, but in ETH-only mode ASM kernel is faster by about 7%. - added "x" key to select GPU for manual -dcri value adjustment. - several minor bug fixes and improvements.
Confirm on v11.3 EthMan is now working correctly with a Core i3-6100 and 13 RX 580 8GB cards. CPU utilization when down from ~35% to ~8%. I Also got a ~1 MH/s ETH and ~7 MH/s KEC speed bump dual mining from v11.2 with the Adrenaline 18.3.1 drivers. Thank you for the update! https://image.ibb.co/bPo2iS/Claymore_11_3_13_GPU.pngHi, Can you share your mod for RX580 cards? MemClock? CoreClock? Mem Voltage? Core Voltage? Thank you!
|
|
|
|
Vann
|
|
March 11, 2018, 12:15:40 AM |
|
You need to find the best settings for your own cards and memory type. My cards are a mix of Asus RX 580/480 with Samsung memory (first three with 2050 MHz memory overclock), Sapphire Nitro+ RX 580's with Samsung memory (2100 MHz memory overclock), Hynix memory (2200 MHz memory oveclock) and a MSI Gaming X RX 580 with Samsung memory (last card with a 2050 MHz memory overclock). -cclock 1200,1150,1200,1200,1200,1200,1200,1200,1200,1200,1200,1200,1200 -mclock 2050,2050,2050,2200,2100,2100,2100,2220,2220,2220,2100,2220,2050 -powlim -10,-5,-10,-15,-10,-15,-10,-10,-5,-10,-10,-10,-10 -cvddc 950,950,950,850,900,850,850,900,900,900,850,900,900 -mvddc 950,950,950,850,900,850,850,900,900,900,850,900,900
|
|
|
|
Omg9500
Newbie
Offline
Activity: 112
Merit: 0
|
|
March 11, 2018, 12:18:55 AM |
|
I'd say that largely depends on the maker of your cards and the memory brand being used. you will find a good source of VBIOS mods and the necessary tools for many cards over at anorak.tech
For example I have 10 sapphire nitro+ SE RX580 SE 8GB which perform at around 31 mh/s each (Hynix and Micron memory) and 3 MSI ARMOR OC RX580 8GB at 28.8 mh/s (Hynix). Rig performs at 398 mh/s on ETH.
But, aren't you a bit late to the show bearing in mind that mining income is dwindling?
|
|
|
|
_voyager_
Newbie
Offline
Activity: 12
Merit: 0
|
|
March 11, 2018, 12:35:00 AM |
|
I understand that automatic dcri is only for eth solo mode. For dual mining mode dcri value 30 is only default value not the best value.
You are correct. -dcri values are detected automatically only for AMD cards in ASM ETH-only mode. For dual mode it is always 30 if you did not specify "-dcri" option directly. Claymore, does automatic detection of best -dcri values occur only on miner initialization or it is happen during miner work in some time intervals?
|
|
|
|
big al
Member
Offline
Activity: 140
Merit: 10
|
|
March 11, 2018, 01:16:23 AM |
|
I'd say that largely depends on the maker of your cards and the memory brand being used. you will find a good source of VBIOS mods and the necessary tools for many cards over at anorak.tech
For example I have 10 sapphire nitro+ SE RX580 SE 8GB which perform at around 31 mh/s each (Hynix and Micron memory) and 3 MSI ARMOR OC RX580 8GB at 28.8 mh/s (Hynix). Rig performs at 398 mh/s on ETH.
But, aren't you a bit late to the show bearing in mind that mining income is dwindling?
Have you tried bumping the clock to 1220 or 1225 on the 2220 mhz ram cards? I find a ratio of 1.81 works best but like you said that depends on the card. From my limited testing that ratio seems optimal.
|
|
|
|
Munka9
Newbie
Offline
Activity: 30
Merit: 0
|
|
March 11, 2018, 03:40:19 AM |
|
What GPU memory size should be to have same hashrate as with altcoins?
My nvidia 3gb cards mine ETH just fine and will continue to do so for about another 12 months (using them in secondary slots in Ubuntu which doesn't allocate ram to other purposes). For amd cards there was once an issue but driver updates fixed it. You need to install latest drivers and turn them too compute mode. If you do that the ETH rate is comparable to alt coins. But the driver is not available for really old cards or appears. I have an R9 390 that mines 29.3 in ETH and 29.5 in expanse, for RX series there is typically no noticeable difference.
|
|
|
|
nirbo
Newbie
Offline
Activity: 3
Merit: 0
|
|
March 11, 2018, 05:31:08 AM |
|
Hey everyone, I am attempting to use the ETH miner v11.3 with NVIDIA V100 GPUs, however I keep getting the following error: GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function GPU 0, Calc DAG failed! I'm using Ubuntu 16.04 and I've tried with both CUDA 9.0 and 9.1 @Claymore, would you please advise? How do I get this to work? to my understanding, v11 of the miner is supposed to support CUDA 9.1. Thanks.
|
|
|
|
wgestickley
Newbie
Offline
Activity: 76
Merit: 0
|
|
March 11, 2018, 06:47:00 AM |
|
Nice job Claymore this version performs the same as you're competition. Seems very stable like 11.0 You still have me with the duel mining. I just hope the bitmain eth ascis are just a rumor. Hi, i think the ASICs are at this moment not a big deal. As i know, the announced ASICs has a similar Price per Hash ratio as a GPU mining rig and a similar energy consumption... Oliver
|
|
|
|
Vann
|
|
March 11, 2018, 06:55:33 AM |
|
There are no ETH ASIC announced. The Bitmain ETH ASIC is just a scantly detailed rumor from a Chinese website that had no details on hash rate and no release date other than potentially "Q2 or Q3 2018".
|
|
|
|
Eisenkopf89
|
|
March 11, 2018, 08:13:12 AM |
|
RX550 runs now with 13.8 MH/s up from 11.2 MH/s. Thanks Claymore!
|
|
|
|
Omg9500
Newbie
Offline
Activity: 112
Merit: 0
|
|
March 11, 2018, 08:13:48 AM |
|
I'd say that largely depends on the maker of your cards and the memory brand being used. you will find a good source of VBIOS mods and the necessary tools for many cards over at anorak.tech
For example I have 10 sapphire nitro+ SE RX580 SE 8GB which perform at around 31 mh/s each (Hynix and Micron memory) and 3 MSI ARMOR OC RX580 8GB at 28.8 mh/s (Hynix). Rig performs at 398 mh/s on ETH.
But, aren't you a bit late to the show bearing in mind that mining income is dwindling?
Have you tried bumping the clock to 1220 or 1225 on the 2220 mhz ram cards? I find a ratio of 1.81 works best but like you said that depends on the card. From my limited testing that ratio seems optimal. I have indeed but then the temp of my cards goes beyond 70C which I don't feel comfortable with as it may affect durability... The settings in overdriventool or MSI afterburner also depend on the modifications made on the VBIOS level.
|
|
|
|
KK120
Newbie
Offline
Activity: 33
Merit: 0
|
|
March 11, 2018, 08:33:51 AM |
|
I have a six 470 rig, modded BIOS with Claymore 11.2 and the following config:
-dcri 1 -cclock 1240 -mclock 2200 -cvddc 950 -tt 72 -fanmin 50 -fanmax 90 Does anyone know why I'm getting about 27MH/s for the 5 GPUs and 32MH/s for 1 of them? The GPUs are identical and bought on the same batch.
|
|
|
|
phuocduong
Member
Offline
Activity: 182
Merit: 10
|
|
March 11, 2018, 08:33:57 AM |
|
thanks, i using it now, i see same v11.2
|
|
|
|
Xianantung
Newbie
Offline
Activity: 68
Merit: 0
|
|
March 11, 2018, 08:58:25 AM |
|
thanks, i using it now, i see same v11.2
Is that more stable?
|
|
|
|
KK120
Newbie
Offline
Activity: 33
Merit: 0
|
|
March 11, 2018, 09:05:46 AM |
|
I have a six 470 rig, modded BIOS with Claymore 11.2 and the following config:
-dcri 1 -cclock 1240 -mclock 2200 -cvddc 950 -tt 72 -fanmin 50 -fanmax 90 Does anyone know why I'm getting about 27MH/s for the 5 GPUs and 32MH/s for 1 of them? The GPUs are identical and bought on the same batch.
Nevermind, upgraded to 11.3 with auto dcri; getting about 32MH/s per card; auto dcri works perfectly taking the guesswork out. Great job @claymore !
|
|
|
|
|
|