Bitcoin Forum
April 20, 2019, 07:42:59 PM *
News: Latest Bitcoin Core release: 0.17.1 [Torrent]
 
   Home   Help Search Login Register More  
Pages: « 1 ... 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 [1131] 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 ... 1283 »
  Print  
Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v12.0 (Windows/Linux)  (Read 6306141 times)
janding
Newbie
*
Offline Offline

Activity: 137
Merit: 0


View Profile
March 21, 2018, 12:46:26 AM
 #22601

I'm having a problem with a crash or lockup when starting.  I've tried 11.3, 11.4 and 11.5.  All exhibit the same issue.

Claymore runs great when I don't set any GPU parameters in the config file.  However, as soon as I add any clock or voltage adjustments to the GPUs, one of 3 things happens when I start the software:
1. BSOD with Thread Stuck in Device Driver error
2. System just locks up (no mouse movement or num lock), requiring a hard power cycle
3. It starts properly but eventually exhibits failure 1 or 2 after an hour or two.

When I say the problem happens with any GPU parameters, I've tested this by using all stock settings (the same that the GPUs default to when I don't set anything in the config), but I still have the problem.  So, the problem is not settings outside of a stable operating range.

The crashes usually occur after "POOL/SOLO Version", but not all the time.

I checked the logs but nothing stands out.  The logs look normal then just stop when the crash happens. 

I'm running a rig with 3xRX570 and 3xRX580 using the blockchain driver on Win10.

I've tried running -oldkernels 1, but that actually made it worse.  I couldn't start mining at all.  I always get OpenCL errors, even with no clock or voltage adjustments.

I tried -gser1 and -gser 2, but neither of those helped.

Is there something else I should be looking at?
 - Dave

Check that your power supply is up to the job, a lot of crashing problems can easily put down to an underrated PSU. Use a power meter to check what you are taking at-the-wall and make sure you have some power to spare to account for losses in the PSU itself, and any spikes on start-up.

The PSU is a good start as he mentioned.
If you have more than 1 GPU try enabling only 1 GPU and test.
Then add them one by one until the issue happens.
You might find out there is a limit and that would most likely indicate a power problem.
Good luck


Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1555789379
Hero Member
*
Offline Offline

Posts: 1555789379

View Profile Personal Message (Offline)

Ignore
1555789379
Reply with quote  #2

1555789379
Report to moderator
1555789379
Hero Member
*
Offline Offline

Posts: 1555789379

View Profile Personal Message (Offline)

Ignore
1555789379
Reply with quote  #2

1555789379
Report to moderator
big al
Member
**
Offline Offline

Activity: 140
Merit: 10


View Profile
March 21, 2018, 03:43:15 AM
 #22602

Try this setting:

Quote
-gser   this setting can improve stability on multi-GPU systems if miner hangs during startup. It serializes GPUs initalization routines. Use "-gser 1" to serailize some of routines and "-gser 2" to serialize all routines.
   Using values higher than 2 allows you also to set custom delay between DAG generation on GPUs, for example, "-gser 5" means same as "-gser 2" and also adds 3sec delay between DAG generation (can be useful for buggy drivers and/or weak PSU).
   Default value is "0" (no serialization, fast initialization).

edit. and this:

Quote
-lidag   low intensity mode for DAG generation, it can help with OC or weak PSU. Supported values are 0, 1, 2, 3, more value means lower intensity. Example: "-lidag 1".
   You can also specify values for every card, for example "-lidag 1,0,3". Default value is "0" (no low intensity for DAG generation).
igotfits
Full Member
***
Offline Offline

Activity: 299
Merit: 100


View Profile
March 21, 2018, 04:15:32 AM
 #22603

Running latest drivers AMD, running latest claymore as of today.

21:11:12:770   26f4   NVML: cannot get current temperature, error 999 (an internal driver error occurred)
21:11:12:770   26f4   NVML: cannot get fan speed, error 999 (an internal driver error occurred)

getting this issue.

Is there anything i can do other than disabling watchdog?
theodrim
Newbie
*
Offline Offline

Activity: 81
Merit: 0


View Profile
March 21, 2018, 04:17:55 AM
 #22604

Running latest drivers AMD, running latest claymore as of today.

21:11:12:770   26f4   NVML: cannot get current temperature, error 999 (an internal driver error occurred)
21:11:12:770   26f4   NVML: cannot get fan speed, error 999 (an internal driver error occurred)

getting this issue.

Is there anything i can do other than disabling watchdog?
NVML have nothing to do with amd hardware, it is NVIDIA Management Library. Just set -platform 1 if you are only using amd hardware on that machine.
igotfits
Full Member
***
Offline Offline

Activity: 299
Merit: 100


View Profile
March 21, 2018, 04:26:07 AM
 #22605

Running latest drivers AMD, running latest claymore as of today.

21:11:12:770   26f4   NVML: cannot get current temperature, error 999 (an internal driver error occurred)
21:11:12:770   26f4   NVML: cannot get fan speed, error 999 (an internal driver error occurred)

getting this issue.

Is there anything i can do other than disabling watchdog?
NVML have nothing to do with amd hardware, it is NVIDIA Management Library. Just set -platform 1 if you are only using amd hardware on that machine.

i have 7 AMD and 1 Nvidia
theodrim
Newbie
*
Offline Offline

Activity: 81
Merit: 0


View Profile
March 21, 2018, 05:14:26 AM
 #22606

i have 7 AMD and 1 Nvidia
Then I don't understand why you mention that you running latest amd drivers in your first post.
Anyway, do you have any errors with your nvidia card in claymore? Do you have -tt or -fanmin/-fanmax set? If yes, set it only for amd cards (from readme: for NVIDIA cards only temperature monitoring is supported, temperature management is not supported.), if no - more info is needed.
mirgro
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
March 21, 2018, 05:34:20 AM
 #22607

Hi people,

Can anyobody help me i am going mad.

I have 5 rig with 6 x RX 580 Special Edition. On all five rigs i have a fresh install of Windows 10 Home 1709. Fisrt my problem started when i could make MSI AB work with all 6 cards (it only recognize 3 cards) so i had to switch to Trixx.

I installed Claymore Dual Miner V 11.3, 11.4 and 11.5 and on all machines same problem. I watch them for few hours and everything is working just fine.No memory errors no nothing everything is perfect. Then suddenly overnight or in the morning some of them shutdown randomly(Blue screen). First i thought it was because of overclocking then when i realize it isnt (beacuse i set them to default), i switched to 11.2 because i read here it is the last stable version.

Now i have new problem. Trixx sudennly bugs out randomly on different rigs at a different time, stop working and all my cards stops working too.

I am desperate in need of help. I tried everything dont know what is the problem.

What i did before this:

Install Windows 10 64 bit Home V1709
Install new latest AMD drivers (compute mode)
tried MSI Ab but cant read 6 cards
uninstall all programs i dont need via CC cleaner and Miningtweaks. bat like Cortana, People, Xbox etc.
Set virtaul memory, power plan all other stuff that i was doing on the previous version of Windows 10. The reason i cant go back to old version of Windows is because it keeps updating.

So my question is what should i do to stop shutdowns?
How can i use MSI with new AMD drivers and Windows 1709?
What Claymore should i use?
Why is Trixx suddenly stop to work?

Hope someone gives me a solution.

Thanks

MSI Afterburner won't work with the latest drivers and more than 3 cards. There is no Group Policy Editor in the Home version of Windows 10, so I don't think you can disable Windows Update driver updates. RX 580's don't need the pixel patcher with a modded Bios, only the RX 470/480/570's.

I'm using v11.5 with the latest Adrenaline drivers in Compute mode on a 13 card RX 480/580 rig with ZERO problems or invalid shares and it's very stable. You can also set the overclock/undervolt/fans directly in the Claymore config or .bat file.

https://bitcointalk.org/index.php?topic=1433925.msg32024794#msg32024794

https://image.ibb.co/kJ8yqH/ASRock_13_GPU_Claymore_11_5.png

@Vann
You have a stable system with good hashrates and zero problems, but the number of shares per card is very low.

10348 shares / 74.75 h = 138.4 shares per hour
138.4 shares per hour / 13 cards = 10.6 shares per hour per card

Normal for 580/570 is 25+ per hour.
theodrim
Newbie
*
Offline Offline

Activity: 81
Merit: 0


View Profile
March 21, 2018, 05:37:56 AM
 #22608

You have a stable system with good hashrates and zero problems, but the number of shares per card is very low.
10348 shares / 74.75 h = 138.4 shares per hour
138.4 shares per hour / 13 cards = 10.6 shares per hour per card
Normal for 580/570 is 25+ per hour.
You sure you saw those shares per hour for 10000MH difficulty? And not 4500MH or something lower?
big al
Member
**
Offline Offline

Activity: 140
Merit: 10


View Profile
March 21, 2018, 05:46:41 AM
 #22609

Shares per hour depends on difficulty of the pool. 
crypto.bin101
Newbie
*
Offline Offline

Activity: 30
Merit: 0


View Profile WWW
March 21, 2018, 06:25:38 AM
Last edit: March 21, 2018, 09:31:16 AM by crypto.bin101
 #22610

Anyone, how to translate AB  POWER LIMIT 85  to -powlim command string. TIA.
mirgro
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
March 21, 2018, 06:34:39 AM
 #22611

You have a stable system with good hashrates and zero problems, but the number of shares per card is very low.
10348 shares / 74.75 h = 138.4 shares per hour
138.4 shares per hour / 13 cards = 10.6 shares per hour per card
Normal for 580/570 is 25+ per hour.
You sure you saw those shares per hour for 10000MH difficulty? And not 4500MH or something lower?

Yes, both are correct.

But is not the difficulty the same for everyone at the same pool? Or does it also depend on the power used?

If it is independent then you are in a pool with less difficulty.
big al
Member
**
Offline Offline

Activity: 140
Merit: 10


View Profile
March 21, 2018, 06:36:28 AM
 #22612

You have a stable system with good hashrates and zero problems, but the number of shares per card is very low.
10348 shares / 74.75 h = 138.4 shares per hour
138.4 shares per hour / 13 cards = 10.6 shares per hour per card
Normal for 580/570 is 25+ per hour.
You sure you saw those shares per hour for 10000MH difficulty? And not 4500MH or something lower?

Yes, both are correct.

But is not the difficulty the same for everyone at the same pool? Or does it also depend on the power used?

If it is independent then you are in a pool with less difficulty.

Some pools have different ports for different difficulty.  Anorak has 3 different difficulties (2b, 4b and 9b)and stratum/ssl for a total of 6 ports.

You use the lower difficulty ports for smaller rigs so less chance of stales, you use the larger difficulty ports to help ease network congestion.
cryptoillusion1
Newbie
*
Offline Offline

Activity: 82
Merit: 0


View Profile
March 21, 2018, 06:41:20 AM
 #22613

Using Claymore V11.5 without the -oldkernels comment
Have 5 x RX580 8GB

Works fine and i can see shares being submitted to the pool but in the log i see the following :

19:24:28:251   330   ETH - Total Speed: 31.537 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
19:24:28:254   330   ETH: GPU0 31.537 Mh/s
19:24:29:106   364   ADL: Cannot find any AMD adapters
19:24:32:111   364   ADL: Cannot find any AMD adapters

should i be concerned about it ?
Vann
Hero Member
*****
Offline Offline

Activity: 714
Merit: 588


View Profile
March 21, 2018, 07:24:08 AM
 #22614

Hi people,

Can anyobody help me i am going mad.

I have 5 rig with 6 x RX 580 Special Edition. On all five rigs i have a fresh install of Windows 10 Home 1709. Fisrt my problem started when i could make MSI AB work with all 6 cards (it only recognize 3 cards) so i had to switch to Trixx.

I installed Claymore Dual Miner V 11.3, 11.4 and 11.5 and on all machines same problem. I watch them for few hours and everything is working just fine.No memory errors no nothing everything is perfect. Then suddenly overnight or in the morning some of them shutdown randomly(Blue screen). First i thought it was because of overclocking then when i realize it isnt (beacuse i set them to default), i switched to 11.2 because i read here it is the last stable version.

Now i have new problem. Trixx sudennly bugs out randomly on different rigs at a different time, stop working and all my cards stops working too.

I am desperate in need of help. I tried everything dont know what is the problem.

What i did before this:

Install Windows 10 64 bit Home V1709
Install new latest AMD drivers (compute mode)
tried MSI Ab but cant read 6 cards
uninstall all programs i dont need via CC cleaner and Miningtweaks. bat like Cortana, People, Xbox etc.
Set virtaul memory, power plan all other stuff that i was doing on the previous version of Windows 10. The reason i cant go back to old version of Windows is because it keeps updating.

So my question is what should i do to stop shutdowns?
How can i use MSI with new AMD drivers and Windows 1709?
What Claymore should i use?
Why is Trixx suddenly stop to work?

Hope someone gives me a solution.

Thanks

MSI Afterburner won't work with the latest drivers and more than 3 cards. There is no Group Policy Editor in the Home version of Windows 10, so I don't think you can disable Windows Update driver updates. RX 580's don't need the pixel patcher with a modded Bios, only the RX 470/480/570's.

I'm using v11.5 with the latest Adrenaline drivers in Compute mode on a 13 card RX 480/580 rig with ZERO problems or invalid shares and it's very stable. You can also set the overclock/undervolt/fans directly in the Claymore config or .bat file.

https://bitcointalk.org/index.php?topic=1433925.msg32024794#msg32024794



@Vann
You have a stable system with good hashrates and zero problems, but the number of shares per card is very low.

10348 shares / 74.75 h = 138.4 shares per hour
138.4 shares per hour / 13 cards = 10.6 shares per hour per card

Normal for 580/570 is 25+ per hour.


Nanopool uses 10000MH share difficulty and Ethermine uses 4000MH share difficulty. 4000 is 40% of 10000, so 25 shares per hour at diff 4000 = 10 shares per hour at diff 10000.
hack4love
Newbie
*
Offline Offline

Activity: 157
Merit: 0


View Profile
March 21, 2018, 07:36:49 AM
 #22615

Now I'm using 11.4 every thing is good is 12.5 effect hashrate should I move to 12.5
numeracci
Newbie
*
Offline Offline

Activity: 79
Merit: 0


View Profile
March 21, 2018, 07:45:55 AM
 #22616

Did anyone notice a big drop of hashrate (or more likely shares) on Nanopool in the last 15-20 days?
It seems like I'm mining half speed.
Maybe it's related to ETH price drop and difficulty?
frikazoid
Newbie
*
Offline Offline

Activity: 3
Merit: 0


View Profile
March 21, 2018, 08:03:01 AM
 #22617

Did anyone notice a big drop of hashrate (or more likely shares) on Nanopool in the last 15-20 days?
It seems like I'm mining half speed.
Maybe it's related to ETH price drop and difficulty?

Yep. Same trouble.
ermis1975
Member
**
Offline Offline

Activity: 158
Merit: 10


View Profile
March 21, 2018, 08:09:37 AM
 #22618

I want to ask for the best pool for 1 gpu system (I will add more later). Now I'm in nanopool. Sometimes I notice that the number of shares for a period of 30-50 min is 0! Is it normal. How can I calculate the number of shares per hour tha pool can gives. Thanks.
numeracci
Newbie
*
Offline Offline

Activity: 79
Merit: 0


View Profile
March 21, 2018, 08:13:05 AM
 #22619

Did anyone notice a big drop of hashrate (or more likely shares) on Nanopool in the last 15-20 days?
It seems like I'm mining half speed.
Maybe it's related to ETH price drop and difficulty?

Yep. Same trouble.

Hmmm, that's too bad.
I guess there is not a lot to do... do you think we will go back to normal speed if ETH price will rise again?
Or it's more a difficulty related issue?
Infovita
Newbie
*
Offline Offline

Activity: 6
Merit: 0


View Profile
March 21, 2018, 08:15:31 AM
 #22620

Hello,
I recently use the claymore at 11.5 under Linux and noticed that over time the number of shares found falls. Claymor, however, reports a permanent hashray. Who else noticed this?
https://clip2net.com/clip/m322528/6d627-clip-37kb.png
Pages: « 1 ... 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 [1131] 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 ... 1283 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!