Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[rawbert]

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-us-west1.nanopool.org:9999 -ewal xxxxxxxxxxxxxxxxxxxxxxxxxxxx/Marvell9.57/ola_lawal@yahoo.com -allpools 1 -allcoins 1 -dpool stratum+tcp://sia-us-west1.nanopool.org:7777 -dwal xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/Marvell9.57/ola_lawal@yahoo.com -dcoin sia -dcri 40 -tt 75

that's what I'm using for my 470s

the 8GB card arrived today and it gets 23mhs stock vs the 20 mhs stock on the 4 gig cards

I also installed the hotfix 16.8.2 over 7.3 and it fixed the issue with upping mem freq over 1700 , all 470s can get to 2050 mem now

Right now I upped the mem to 1750 for all cards and the 8 gig card gets to 24 mhs eth and 467 sia , all the 4 GB cards arfe 21.2 and 427 sia.

I think I could get these cards way higer with a custom bios though all in all they are decent cards with no 480s in stock

@Marvell1

how do you apply hot fix over 7.3? I first install 16.7.3-it is OK, then i try to install hotfix, it installs, but then throws Q5core.dll error if i keep 16.7.3. If i remove 16.7.3 first, then 'hotfix' installs fine.
By "over", do you mean install "hotfix" in the same folder as 16.7.3, or let it choose whatever folder it chooses?
Thanks

The hotfix is standalone, you need to remove 16.7.3 first.

[mirny]

For some strange reason, top-end nVidia cards do not "scale" in proportion to their compute capacity when mining Dagger-Hashimoto.  I have an EVGA CLASSIFIED 980ti, and it mines ETH/DCR at 22MH/s / 210MH/s, but my EVGA 970 FTW cars get 20MH/s mining ETH (with Genoil's miner).  On other, more compute intensive algos, the top-end cards perform better.  My 980ti is on Win 7 x64, driver 368.81.  

Thanks for clarifying, is that the best performing driver for Win 7 x64?
We are now running the latest one, maybe we can get a bit higher speed with another driver?

I CHECKED YESTERDAY--

No new nVidia drivers for my Win 7 x64 system.  There are newer drivers (designated with a higher number than 368.81), but not for my system.  As for speed, Claymore's miner is actually faster in hash rate than Genoil's 1.1.7 by about ~1MH/s.  I get just under 22MH/s , whereas Genoil's miner was mining at just over 20MH/s.  My Linux-based GTX 270 cards mine at just under 20MH/s with Genoil's miner.  Claymore's miner has only mined with driver 368.81 on my Win 7 system, so I can't compare perforrmance on driver versions.

I was mining Library Credits (LBC) with my GTX 980ti because it can perform as well as 5 GTX 750ti cards mining LBC, about 250MH/s.  And, while the GTX 750ti cards will mine at a steady 50MH/s each, the GTX 980ti card will fluctuate between 220MH/s and 250MH/s because of temperature throttling. The GTX 980ti card will start off higher than 260MH/s, but rapidly throttle down.  I try to use cards on algos where they do well.  With Claymore's miner, I miine ETH/DCR.       --scryptr

so, check today

I'm getting 31.5MHs ETH and 200MHs DCR @ 1900/4800
Win7 64bit, 372.54 Drivers, it should work for you too.

btw, now I can mine ETH with 750Ti in win7 at astonishing speed of 1.5MHs

[scryptr]

For some strange reason, top-end nVidia cards do not "scale" in proportion to their compute capacity when mining Dagger-Hashimoto.  I have an EVGA CLASSIFIED 980ti, and it mines ETH/DCR at 22MH/s / 210MH/s, but my EVGA 970 FTW cars get 20MH/s mining ETH (with Genoil's miner).  On other, more compute intensive algos, the top-end cards perform better.  My 980ti is on Win 7 x64, driver 368.81.  

Thanks for clarifying, is that the best performing driver for Win 7 x64?
We are now running the latest one, maybe we can get a bit higher speed with another driver?

I CHECKED YESTERDAY--

No new nVidia drivers for my Win 7 x64 system.  There are newer drivers (designated with a higher number than 368.81), but not for my system.  As for speed, Claymore's miner is actually faster in hash rate than Genoil's 1.1.7 by about ~1MH/s.  I get just under 22MH/s , whereas Genoil's miner was mining at just over 20MH/s.  My Linux-based GTX 270 cards mine at just under 20MH/s with Genoil's miner.  Claymore's miner has only mined with driver 368.81 on my Win 7 system, so I can't compare perforrmance on driver versions.

I was mining Library Credits (LBC) with my GTX 980ti because it can perform as well as 5 GTX 750ti cards mining LBC, about 250MH/s.  And, while the GTX 750ti cards will mine at a steady 50MH/s each, the GTX 980ti card will fluctuate between 220MH/s and 250MH/s because of temperature throttling. The GTX 980ti card will start off higher than 260MH/s, but rapidly throttle down.  I try to use cards on algos where they do well.  With Claymore's miner, I miine ETH/DCR.       --scryptr

so, check today

I'm getting 31.5MHs ETH and 200MHs DCR @ 1900/4800
Win7 64bit, 372.54 Drivers, it should work for you too.

btw, now I can mine ETH with 750Ti in win7 at astonishing speed of 1.5MHs

WITH WHAT MODEL NVIDIA GPU?  --

I am speaking of an EVGA CLASSIFIED 980ti GPU.  I have never clocked the core greater than the low-to-middle 1400s.  I am, however, downloading driver 372.54 as I type this.  I just checked, it is available as an official download for Win 7 x64.  I did not go to the nVidia site and download a driver unfit for my system. If you have a 10XX series card, your numbers may be real.  But, at 1900 core, my card would likely throw sparks and flame out.

The new 10XX series circuits are able to tolerate much more extreme clocking.  They use less energy, and run much cooler.  Thanks for the reminder!       --scryptr

[mineromineroso]

Clock control with rx480 is working great in 6.x, but i miss voltage control. Sometimes my miners lose power due to a external problem with some kind of spike of some factory in the neighborhood (when it happens, its always the same hour in the morning). Miners restart and launch claymore miner, but Wattman returns to default settings. This is 21mh/s instead of 27mh/s per card (rx480 4gb). I need to set memory to 2200mhz with 900mV and also underclock gpu in all steps.
Its possible to implement voltage control with claymore miner with the new ADL version?

[clipto]

Not a Claymore's miner problem, but does anyone know why our TitanX is slowing down after been started mining?



The GTX970 isn't doing that?

[scryptr]

Not a Claymore's miner problem, but does anyone know why our TitanX is slowing down after been started mining?



The GTX970 isn't doing that?

POSSIBLY HEAT THROTTLING--

My GTX 750ti cards rock steady, but the bigger cards often slow down because of heat.      --scryptr

[mirny]

so, check today

I'm getting 31.5MHs ETH and 200MHs DCR @ 1900/4800
Win7 64bit, 372.54 Drivers, it should work for you too.

btw, now I can mine ETH with 750Ti in win7 at astonishing speed of 1.5MHs


WITH WHAT MODEL NVIDIA GPU?  --

I am speaking of an EVGA CLASSIFIED 980ti GPU.  I have never clocked the core greater than the low-to-middle 1400s.  I am, however, downloading driver 372.54 as I type this.  I just checked, it is available as an official download for Win 7 x64.  I did not go to the nVidia site and download a driver unfit for my system. If you have a 10XX series card, your numbers may be real.  But, at 1900 core, my card would likely throw sparks and flame out.

The new 10XX series circuits are able to tolerate much more extreme clocking.  They use less energy, and run much cooler.  Thanks for the reminder!       --scryptr

Oh, yeah, I was just surprised, that I can mine ETH with GTX1070 in Win7, so I forget to mention card type.
Sorry for confusion.

[Marvell1]

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-us-west1.nanopool.org:9999 -ewal xxxxxxxxxxxxxxxxxxxxxxxxxxxx/Marvell9.57/ola_lawal@yahoo.com -allpools 1 -allcoins 1 -dpool stratum+tcp://sia-us-west1.nanopool.org:7777 -dwal xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/Marvell9.57/ola_lawal@yahoo.com -dcoin sia -dcri 40 -tt 75

that's what I'm using for my 470s

the 8GB card arrived today and it gets 23mhs stock vs the 20 mhs stock on the 4 gig cards

I also installed the hotfix 16.8.2 over 7.3 and it fixed the issue with upping mem freq over 1700 , all 470s can get to 2050 mem now

Right now I upped the mem to 1750 for all cards and the 8 gig card gets to 24 mhs eth and 467 sia , all the 4 GB cards arfe 21.2 and 427 sia.

I think I could get these cards way higer with a custom bios though all in all they are decent cards with no 480s in stock

@Marvell1

how do you apply hot fix over 7.3? I first install 16.7.3-it is OK, then i try to install hotfix, it installs, but then throws Q5core.dll error if i keep 16.7.3. If i remove 16.7.3 first, then 'hotfix' installs fine.
By "over", do you mean install "hotfix" in the same folder as 16.7.3, or let it choose whatever folder it chooses?
Thanks

The hotfix is standalone, you need to remove 16.7.3 first.

Not true I just did the upgrade option

[Volodka_007]

on 6.1.3, after starting my fans resets to autospeed, but if I set the option -tt 0 I can`t keep track of temperatures

Try this:
https://mega.nz/#!HphjhRyI!ynSMiXk4NfNWsLbjmD03noY93Zk5mboCq1UacB-S570

Excellent !!! everything is working

OK, after 15 hours solo I have 9 blocks rejections and no one confirmed that something was wrong with 6.1.4b+parity 1.3

I go back to Genoil ....

[qqqq]

Claymore, could you add current diff info for eth in your miner or ethman please.

[ocminer]

In case anyone wants some bonus on SIA mining, I still have 20% Bonus on sia.suprnova.cc and the cmdline would be something like this:

ethdcrminer64.exe -epool etc-eu.suprnova.cc:3333 -ewal suprnova.1 -epsw x -esm 3 -dpool sia.suprnova.cc:7777 -dwal suprnova.1 -dpsw x -dcoin sia -allpools 1

Works with claymore since version 5.3

[Cryptozillah]

I am trying to get dual mining going with my 1070 gpu
I am getting "OpenCL.dll is missing" when starting the miner.

Anyone know what to do ?

[Claymore]

Claymore, could you add current diff info for eth in your miner or ethman please.

Press "s" key, it shows current diff.

In case anyone wants some bonus on SIA mining, I still have 20% Bonus on sia.suprnova.cc and the cmdline would be something like this:

ethdcrminer64.exe -epool etc-eu.suprnova.cc:3333 -ewal suprnova.1 -epsw x -esm 3 -dpool sia.suprnova.cc:7777 -dwal suprnova.1 -dpsw x -dcoin sia -allpools 1

Works with claymore since version 5.3

Added to readme and OP to "SAMPLE USAGE" section:

Code:

 suprnova Ethereum_Classic(ETC)+Siacoin:
	ethdcrminer64.exe -epool etc-eu.suprnova.cc:3333 -ewal YourLogin.YourWorkerName -epsw x -esm 3 -dpool sia.suprnova.cc:7777 -dwal YourLogin.YourWorkerName -dpsw x -dcoin sia -allpools 1 -allcoins -1

[qqqq]

Claymore, could you add current diff info for eth in your miner or ethman please.

Press "s" key, it shows current diff.

Thanks, i knew about "s" but forgot about diff info there ))

[mikhan]

Claymore, I'm using latest 6.1 beta:
1. it still shows "6.0" at the beginning screen
2. i got 5x RX480 in the rig and the miner shows only GPU0-GPU3 fans and temps, where is GPU4? All 5 GPUs are mining. There are no errors in logs about temps and fans

[cyr524]

First of all, thank you for making the software, there is a problem
My GTX1080 is much slower than the friend of GTX1070, especially the ETH count, I am about 1080 in 20MHz, 1070 of friends can reach 30MHz, ask if there is where the setting is not correct?

[clipto]

POSSIBLY HEAT THROTTLING--

My GTX 750ti cards rock steady, but the bigger cards often slow down because of heat.      --scryptr

That was it! 
Thanks, why didn't I think of that. 

[alrami]

Getting 2 mh/s with my 980ti. Suggestions?

driver version 372.54

install older driver for Maxwell

What driver do you recommend?

362.0 working 24/7
i'm see no problems at all my win7x64 rigs

[Claymore]

Claymore, I'm using latest 6.1 beta:
1. it still shows "6.0" at the beginning screen
2. i got 5x RX480 in the rig and the miner shows only GPU0-GPU3 fans and temps, where is GPU4? All 5 GPUs are mining. There are no errors in logs about temps and fans

1. Ok, fixed.
2. https://bitcointalk.org/index.php?topic=1433925.msg15950514#msg15950514

[alrami]

After trying a lot of different driver versions, we have it running with CUDA 6.5 and Miner 6.1
Geforce Driver: 350.12

ETH - Total Speed: 21.970 Mh/s, Total Shares: 26, Rejected: 0, Time: 00:08
ETH: GPU0 12.659 Mh/s, GPU1 9.311 Mh/s
SC - Total Speed: 329.548 Mh/s, Total Shares: 36, Rejected: 0
SC: GPU0 189.889 Mh/s, GPU1 139.659 Mh/s

GPU0=GTXTitanX
GPU1=GTX970

----------

Current batfile is this:

ethdcrminer64.exe -epool etc-eu.suprnova.cc:3333 -ewal user.worker -epsw x -esm 3 -dpool sia.suprnova.cc:7777 -dwal worker.user -dpsw x -dcoin sia -allpools 1

We got it running at Windows 7 x64 now.

GPU #0: GeForce GTX TITAN X, 12288 MB available, 24 compute units, capability: 5.2
GPU #1: GeForce GTX 970, 4096 MB available, 13 compute units, capability: 5.2
ETH - Total Speed: 34.305 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:02
ETH: GPU0 15.662 Mh/s, GPU1 18.674 Mh/s

Still, the GTX 970 is faster than the GTX TitanX, both in single as in dual mode?
How is this possible?

think it's case Pascal drivers are not enough optimised now

and in my eye, it's better not to use new and old Nvidia in one rig
case they likes different drivers
example: 980 takes 180Mh with 970, but with 1070 980 makes 150Mh only (not ETH, just for numbers)
i'm saw better results with a same cards in a rig
and btw, look at memClocks, 970 can be 20-22Mh/Eth