Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[tkredmond]

Is Nanopool down?

I keep getting disconnected after 10-15 minutes

[1714814331]

1714814331

[1714814331]

1714814331

[1714814331]

1714814331

[richx]

anyone know whats the better dual mining for gtx1070? ETH+DCR or ETH+SC...? thanks!

[bardacuda]

Anyone using this miner with 290s or 390s on 15.12 drivers? I tried it with 16.9.2 but still get 31MH per card...no different than when I used Genoil's miner like a year ago. Weren't there some efficiency improvements from recoding using GCN assembler?

[cryptohunter]

Anyone using this miner with 290s or 390s on 15.12 drivers? I tried it with 16.9.2 but still get 31MH per card...no different than when I used Genoil's miner like a year ago. Weren't there some efficiency improvements from recoding using GCN assembler?

31mh per card? i thought 290 were down to sub 20 now.

my 280x get about 15

[chris330]

hey guys I have a GTX1070 which is mining eth at 23/24MH/s but I keep seeing people say I should be getting 28? Is that realistic or is 24 normal? Thanks

[boysie]

Can you point me out the directions to get Boysies BIOS...

Boysie's BIOS are on the ethereum forums.

Here is a link to his low power BIOS. You can search for his other ones there.
https://forum.ethereum.org/discussion/9400/boysies-rx480-ref-bios-29mh-low-pwr-eth-or-dual-mining

Glad its still helping ppl

[vapourminer]

Anyone using this miner with 290s or 390s on 15.12 drivers? I tried it with 16.9.2 but still get 31MH per card...no different than when I used Genoil's miner like a year ago. Weren't there some efficiency improvements from recoding using GCN assembler?

i found no difference on my 390 with 15.12 or 16.11.x drivers.

31 mhs @ 1100/1500 sapphire nitro

[bardacuda]

Anyone using this miner with 290s or 390s on 15.12 drivers? I tried it with 16.9.2 but still get 31MH per card...no different than when I used Genoil's miner like a year ago. Weren't there some efficiency improvements from recoding using GCN assembler?

i found no difference on my 390 with 15.12 or 16.11.x drivers.

31 mhs @ 1100/1500 sapphire nitro

Ok cool. Thx!  

31mh per card? i thought 290 were down to sub 20 now.

my 280x get about 15

Well when I ran it last night I noticed if I used the new intensity values (-ethi) of 8, 7, 6, etc. they would only run at 26MH. But, when I tried my old setting of -ethi -49152 I got my old hashrate of 31MH again. Not sure if it will work for you but it's worth a shot. It could just be that the DAG is too large compared to your total VRAM. Also I was mining ETC and I think my VRAM was only loaded to 1.6GB.

[Hagmonar]

Anyone using this miner with 290s or 390s on 15.12 drivers? I tried it with 16.9.2 but still get 31MH per card...no different than when I used Genoil's miner like a year ago. Weren't there some efficiency improvements from recoding using GCN assembler?

i found no difference on my 390 with 15.12 or 16.11.x drivers.

31 mhs @ 1100/1500 sapphire nitro

I have the same results.

[phzi]

There is a crash bug in every version I have tested: if the pool sends an invalid headerhash/seedhash, miner stops mining (all gpus say crashed in opencl call) until you manually restart the mining software.  I suspect it has something to do with not using the -allpools and the related detection.

Bit of a problem as this represents a potential DoS vector with a fairly simple forged packet.

[crazyearner]

Any idea on how to fix this keeps on happening on 480 cards

WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
Restarting OK, exit... crashes and have to restart system as claymore wont exit or close

[BogdanCo]

Any idea on how to fix this keeps on happening on 480 cards

WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
Restarting OK, exit... crashes and have to restart system as claymore wont exit or close

Are you dual mining ETH + DCR?

[fittsy]

Any idea on how to fix this keeps on happening on 480 cards

WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
Restarting OK, exit... crashes and have to restart system as claymore wont exit or close

This happened when I was dual mining. I ended up having to restore the BIOS on a couple of cards back to the original. They couldn't handle the extra stress from dual mining with the modified BIOS.

[LJLT]

Hello guys.

Im getting

GPU #1 got incorrect share. If you see this warning often, make sure you did not overclock it too much!

just one of 5, all with the same settings, the same model. Dont get why, any ideas?

the command prompt closed on me by it self... what does that mean?

[BogdanCo]

Any idea on how to fix this keeps on happening on 480 cards

WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit
Restarting OK, exit... crashes and have to restart system as claymore wont exit or close

This happened when I was dual mining. I ended up having to restore the BIOS on a couple of cards back to the original. They couldn't handle the extra stress from dual mining with the modified BIOS.

Try ETH + PASC, it's working quite nice... with an intensity of -dcri 15

[kobazik]

I got ASrock BTC v2 motherboard and when make onboad Intel gpu as primary, then Claymore or MSI Afterburn don't show my RX480 cards temperature anymore. I'm running Win10 and Crimson 16.9.2

Any ideas?

[BogdanCo]

I got ASrock BTC v2 motherboard and when make onboad Intel gpu as primary, then Claymore or MSI Afterburn don't show my RX480 cards temperature anymore. I'm running Win10 and Crimson 16.9.2

Any ideas?

Same issue here, solved with DDU and Crimson 16.11.5 then

[salecz]

I have problem with remote manager and ddns. When i enter IP working ok, but when enter ddns host name, dont work. On mobile app ddns works ok. Can you fix it on remote manager?

[noviceminer]

Hello guys.

Im getting

GPU #1 got incorrect share. If you see this warning often, make sure you did not overclock it too much!

just one of 5, all with the same settings, the same model. Dont get why, any ideas?

the command prompt closed on me by it self... what does that mean?

I have the exact same problem and nobody seems to have any clue. I even asked Claymore and he said it could be either hardware issue or riser but I changed my riser and hardware is only 6 months old. I bought it brand new. Such a big community and no help is appalling

[newmz]

Anyone using this miner with 290s or 390s on 15.12 drivers? I tried it with 16.9.2 but still get 31MH per card...no different than when I used Genoil's miner like a year ago. Weren't there some efficiency improvements from recoding using GCN assembler?

i found no difference on my 390 with 15.12 or 16.11.x drivers.

31 mhs @ 1100/1500 sapphire nitro

I have the same results.

I was running 290s and 390s in Windows 7 64 with 15.12 drivers using Claymore, until I tried sgminer-gm in EthOS (which is basically a custom Ubuntu Linux).

I get a higher hash-rate with sgminer-gm, using slightly less power and no fee.

I can also mine ETC,ZEC, ZCL or XMR with EthOS but obviously ETH is much more profitable right now. I have had it for many months and I switched to Windows/Claymore for a while but Windows just seems to always have problems. I switched back to Linux for stability.

All my 290s and 1 390 are at  slightly above 31mh/s except for one which has elpida RAM which is doing 30. The 290s are at core 1100 mem 1125, the 390 is at core 1120 mem 1500 and it often does 32mh/s.

If you aren't dual mining and you can use Linux I think sgminer-gm is a no-brainer.