Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[cryptoillusion1]

Forgot to switch off updates on one of my Windows machines and it downloaded some MS crap and broke my mining config.

I run DDU and installed latest Radeon drivers + run atikmdagpatcher but after reboot I'm getting only 16-17 MH/s on rx470 4GB.

I used to get between 26 and 29 MH/s.

Whats wrong? Also afterburner is not working anymore.

Mind that I flashed all 6 cards so theoretically I shouldn't need any afterburner tweaking. It seems almost as if the DAG issue is back for me.

edit:

Just checked in Radeon Settings, all cards are running on their preconfigured settings (1900 memory, 1090 GPU). Why am I getting only 16 MH/s???

Have you got it in compute mode?

[IncludeBeer]

Forgot to switch off updates on one of my Windows machines and it downloaded some MS crap and broke my mining config.

I run DDU and installed latest Radeon drivers + run atikmdagpatcher but after reboot I'm getting only 16-17 MH/s on rx470 4GB.

I used to get between 26 and 29 MH/s.

Whats wrong? Also afterburner is not working anymore.

Mind that I flashed all 6 cards so theoretically I shouldn't need any afterburner tweaking. It seems almost as if the DAG issue is back for me.

edit:

Just checked in Radeon Settings, all cards are running on their preconfigured settings (1900 memory, 1090 GPU). Why am I getting only 16 MH/s???

Have you got it in compute mode?

Fuck! This fixed my problem, too. So much time and effort for something so trivial to fix. Time to drink.

[muzuca]

Hi guys, my rig keeps going offline. On restart I see the following

dev/sda2: recovering journal
dev/sda2: clean, 127903/436320 files, number number blocks
Created slice user Slice of miner
Starting user manager for uid 1000
Started session 7 of user miner
Stopping user manager for uid 1000
A slice job is running for raise network (4min/5min3s)
Repeat repeat until time reaches 5 min

Some Claymore Miner information

Cannot resolve 'eth-eu2.nanopool.org'
ETH: Stratum - Cannot connect to eth-eu2.nanopool.org:9999
ETH: Stratum - Failed to connect, retry in 20sec

Repeat repeat

Any idea what is going on or how to find out?

I'm getting same error and I'm investigating. I don't if is something with my rigs or internet.

[Ratledge]

And right now I am having GPU 0 hash rate 0 issue, it happens identically 2 of my rigs. It happens whenever I remote connect via teamviewer then I need to restart the rig, and I need to be there physically to do that(gotta switch the display otherwise it is not going to work) I do not have this problem before windows update and v.11 but I guess it has nothing to do with v.11, I downgraded v.10.6 and still happens.
...

use a dummy plug OR attach a monitor (monitor need not be switched on)
https://www.amazon.com/Headless-Display-Emulator-Headless-1920x1080-generation/dp/B06XT1Z9TF

Those are 1920 x 1080 max at 60 hertz.  For the same price you can get 3840 x 2160 support (item looks identical) on eBay here: https://www.ebay.com/itm/HDMI-Display-port-Dummy-Plug-4K-Display-MINING-3840-2160-60Hz-Headless-Emulator/222825303024?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 shipping from the US (Texas, I think?) or if you have plenty of time the same item is $2.79 shipped from China (same meaning also 3840 x 2160 or "4K" support) here: https://www.ebay.com/itm/HDMI-Display-Emulator-Dummy-Plug-Headless-Ghost-1-4-DDC-EDID-for-PC-Mac-Devices/202212531225?ssPageName=STRK%3AMEBIDX%3AIT&var=502180406403&_trksid=p2057872.m2749.l2649.

[muzuca]

Are there ANY coins worth dual mining now?

I'm mining ETH + XVG, but with a low intensity to avoid spent a lot of energy.

[Ratledge]

Guys is ethermine.org still one of the go to pools for ethereum mining?

I always have about 96% accepted shares and 4% stale shares .. ? Why 4%? Is that the miner fee?
What does stale mean in this relation?

I mean the weekly outcome is good but slightly below of the whattomine calculation with my "reported" hashrate from my rigs.

All rigs perfectly stable since the last restart one week ago. No disconnects, restarts, etc.

Any help or info for me?

Thanks a lot!

In the context of pool mining, a 'stale' share means that someone else beat you to it (i.e. it was reported already).

[esrodrig]

Hi all

Thank you for your miner. I've used use for several months and its great. Keep the good work please.

Now version 10.5 does detect my 5 cards 4-570 and 1-VEGA-56

Version 11 does not detect the VEGA-56. Does version 11.1 fix that?

I have not tried upgrading yet drivers yet. But same system I start 10.5 works great. I stop it and start 11 and the VEGA 56 is not shown when miner initializes.

Any thoughts?

- Esr

[LJLT]

Hello im having trouble with my first nvidia rig

Asus prime z270 A
4GB ram
1000W psu
sanding 256gb ssd

3x Gigabyte 1050TI OC
4x Zotac 1050 TI mini

Im overclocking with AB


im getting this error

15:58:31:260   1da8   GPU 5, GpuMiner cu_k1 failed 4, unspecified launch failure
15:58:31:267   1420   GPU 6, GpuMiner cu_k1 failed 4, unspecified launch failure
15:58:31:318   1c5c   GPU 3, GpuMiner cu_k1 failed 4, unspecified launch failure
15:58:31:344   1c58   GPU 2, GpuMiner cu_k1 failed 4, unspecified launch failure
15:58:31:407   1700   GPU 4, GpuMiner cu_k1 failed 4, unspecified launch failure
15:58:31:411   1db0   GPU 0, GpuMiner cu_kd failed 4 (1), unspecified launch failure
15:58:31:436   1db0   GPU 0, Calc DAG failed!
15:58:31:441   1da8   GPU 5, GpuMiner kx failed 1
15:58:31:446   1420   GPU 6, GpuMiner kx failed 1


Any ideas? Thanks

[Munka9]

Hello im having trouble with my first nvidia rig

Asus prime z270 A
4GB ram
1000W psu
sanding 256gb ssd

3x Gigabyte 1050TI OC
4x Zotac 1050 TI mini

Im overclocking with AB


im getting this error

15:58:31:260   1da8   GPU 5, GpuMiner cu_k1 failed 4, unspecified launch failure
15:58:31:267   1420   GPU 6, GpuMiner cu_k1 failed 4, unspecified launch failure
15:58:31:318   1c5c   GPU 3, GpuMiner cu_k1 failed 4, unspecified launch failure
15:58:31:344   1c58   GPU 2, GpuMiner cu_k1 failed 4, unspecified launch failure
15:58:31:407   1700   GPU 4, GpuMiner cu_k1 failed 4, unspecified launch failure
15:58:31:411   1db0   GPU 0, GpuMiner cu_kd failed 4 (1), unspecified launch failure
15:58:31:436   1db0   GPU 0, Calc DAG failed!
15:58:31:441   1da8   GPU 5, GpuMiner kx failed 1
15:58:31:446   1420   GPU 6, GpuMiner kx failed 1


Any ideas? Thanks

You have over clocked too much. That error usually relates to core clock rather than memory on my rig, but it can be either.

I usually find 52.5W power limit and +50 MHz is optimal for 1050 ti. Also dual mining is marginal. I usually turn it off.

Regards

Adam

[btcshiner]

Why would anyone dual mine verge as it is not profitable? What dual coin is profitable to mine? I would mine a second coin at break even but which coin has most potential?

SHIELD coin has a nice price and low diff, you can try mining that :

-dcoin blake2s -dpool stratum+tcp://mining.oxo.rs:4444 -dwal <XSH_WALLET_ADDRESS> -dpsw c=XSH

Or NevaCoin also still has a low diff :

-dcoin blake2s -dpool stratum+tcp://mining.oxo.rs:4444 -dwal <NEVA_WALLET_ADDRESS> -dpsw c=NEVA

Have you been paid by this pool?  I did not get paid for the shield block that was found today.  I see no contact for them on the site.

[Ursul0]

Hi guys, my rig keeps going offline. On restart I see the following

dev/sda2: recovering journal
dev/sda2: clean, 127903/436320 files, number number blocks
Created slice user Slice of miner
Starting user manager for uid 1000
Started session 7 of user miner
Stopping user manager for uid 1000
A slice job is running for raise network (4min/5min3s)
Repeat repeat until time reaches 5 min

Some Claymore Miner information

Cannot resolve 'eth-eu2.nanopool.org'
ETH: Stratum - Cannot connect to eth-eu2.nanopool.org:9999
ETH: Stratum - Failed to connect, retry in 20sec

Repeat repeat

Any idea what is going on or how to find out?

you should check if eth-eu2.nanopool.org is accessible for you, as it seems like your DNS has problem resolving the host name

[ascaloon]

Having an issue... As I good remember I didnt read about that here before. I have 3 rigs 1x 7xSapphire RX580Nitro+LE / 1x 7xSapphire RX580Nitro+OC / 1x 3xSapphire RX580Nitro+OC. All cards are bios modded.
I use the same settings in all my rigs and DUAL mining ETH+XVG.

mem: 2200mhz / 885mv
core: 1180mhz / 885mv

Today I check all my rigs with HWinfo and on my 1st rig with LE cards, all GPUs has a bunch of memorie errors. Other 2  rigs has zero or a few mem errors. Im play with mem/core/mv settings and try all possible but no change in mem errors. The other thing is that Claymore shows me 300-400 invalid shares (if you see this offen make sure that you dont overclock it to much, blablabla) on #GPU3 in 24 hours (did not do that earlier)

Any idea?

[dragonmike]

Are there ANY coins worth dual mining now?

Nope. I went back to mining exclusively ETH.
Any second coin you try to mine costs you more in electricity currently. Not worth it. Want a secondary coin? Buy it.

[RYXES]

Are there ANY coins worth dual mining now?

Nope. I went back to mining exclusively ETH.
Any second coin you try to mine costs you more in electricity currently. Not worth it. Want a secondary coin? Buy it.

Spot on. Ethash mining only is the way forward for right now.

[techbabe]

Are there ANY coins worth dual mining now?

I'm mining ETH + XVG, but with a low intensity to avoid spent a lot of energy.

can you share your bat how its looks for me please

[FFI2013]

Are there ANY coins worth dual mining now?

Nope. I went back to mining exclusively ETH.
Any second coin you try to mine costs you more in electricity currently. Not worth it. Want a secondary coin? Buy it.

Spot on. Ethash mining only is the way forward for right now.

Especially when these pool are only paying half of what your supposed to get when connected for the full 24hrs if lucky, with their shitty servers it can't handle the load so my 2nd coin is pool hopping on my rigs

[MagicSmoker]

Yo Claymore - I've been tweaking a 4x RX 560 rig over the last couple of weeks, mainly on Cryptonight, but just switched over to Ethash using v11.0 and something peculiar is going on here. I am using OverDrivenTool and v18.2.2 of the Adrenalin drivers and while mining Cryptonight I get 500 - 440 - 440 - 500 for cards 0 through 3, while mining Ethash I get 14.0 - 14.0 - 12.9 - 12.9 for the same card order... In other words, the first and last cards are fastest at Cryptonight while the first and second are fastest at Ethash. Same overclock, same card brand, even the same memory and BIOS straps in all of them.

Not sure what to do about it, if anything can even be done, but an 8-12% variation in hashrate seems a bit odd.

[ascaloon]

Having an issue... As I good remember I didnt read about that here before. I have 3 rigs 1x 7xSapphire RX580Nitro+LE / 1x 7xSapphire RX580Nitro+OC / 1x 3xSapphire RX580Nitro+OC. All cards are bios modded.
I use the same settings in all my rigs and DUAL mining ETH+XVG.

mem: 2200mhz / 885mv
core: 1180mhz / 885mv

Today I check all my rigs with HWinfo and on my 1st rig with LE cards, all GPUs has a bunch of memorie errors. Other 2  rigs has zero or a few mem errors. Im play with mem/core/mv settings and try all possible but no change in mem errors. The other thing is that Claymore shows me 300-400 invalid shares (if you see this offen make sure that you dont overclock it to much, blablabla) on #GPU3 in 24 hours (did not do that earlier)

Any idea?

EDIT:
Beleive me or not a simple rig cleanup solve my problem with incorect shares on #GPU3 and now I have much less memorie errors in HWinfo

[alex_85]

Why on nlpooo when i am mining XVG other coins appear on Last 50 Earnings
For example NevaCoin ?

[mine_phun]

Why on nlpooo when i am mining XVG other coins appear on Last 50 Earnings
For example NevaCoin ?

It is an overflow setting. When the VERGE network is getting slow and there is no work for your miner, the server can do two things. One is to disconnect you, second is to give you another task so your power is not wasted.
We choose the second, since disconnecting gives other problems ( Some Rigs start to reboot then and become unstable ).