Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Bigdrago]

Sooo..Installed 11.2 on my Win10 64bit rig and disabled defender anti virus - worked ok for a little bit then after a few minutes of running my two 570's cards reduce in hash - 24 down to 10..to 7..and eventually 0, the two 550 remained aroun 9-11...

Im running two RX570 and two RX550 (all 4gb).

So.. Stopped the rig completely.

Put back decided to go back to the 10.6 that I found stable...

It wont go past:

AMD Cards available: 4
GPU #0: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 1:0:0)
GPU #0 recognized as Radeon RX 470/570
GPU #1: Baffin (Radeon RX 550 Series), 4096 MB available, 10 compute units (pci bus 6:0:0)
GPU #1 recognized as Radeon RX 460/560
GPU #2: Baffin (Radeon RX 550 Series), 4096 MB available, 10 compute units (pci bus 7:0:0)
GPU #2 recognized as Radeon RX 460/560
GPU #3: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #3 recognized as Radeon RX 470/570
POOL/SOLO version

None of the cards are clocked everything is standard from the box.

Anyone any ideas ?

I tried to download 11 - 11.1 and 11.2 again from Google - but Google wont allow it (?) says virus found used Mega instead.

Checked the logfile? This happened to me once I was oc and undervolt to much.

[1715090007]

1715090007

[1715090007]

1715090007

[zerf2004]

@Claymore
Please get dev-fee with 14444 port or make a option for change it.
My ISP don't let me connect to 4444 and 5555 ports.

ETH: Stratum - Cannot connect to eu1.ethermine.org:5555
DevFee: ETH: Stratum - Failed to connect, retry in 20 sec...

ETH: Stratum - Cannot connect to eu1.ethermine.org:5555
DevFee: ETH: Stratum - Failed to connect, retry in 20 sec...

ETH: Stratum - Cannot connect to eu1.ethermine.org:5555
DevFee: ETH: Stratum - Failed to connect, retry in 20 sec...

Same here! Please allow an option to define devfee port.

[Viaggiatore]

for me 11.1 is more stable version. on 11.2 i get crash evry 10 min...

I also had same problems, not every 10 minutes but crashed twice in 24 hours. I'm mining with 8 gpu since 4 months and never had a single crash with previous Claymore versions, something wrong with 11.2

On my Linux miners, the migration to v11.2 reduced performance. All was tuned automatically to optimise hashrate and consumption, especially the ETHI/DCRI... finally after reoptimizing, changing memfreq and intensities, it was faster and consuming less... If GPU are unstable, it may be because cards are near instability and were pushed too far with new algorithm. Review the frequencies and intensities...

It's the program itself crashing not the gpus. Btw I have very conservative freq (both on GPUs and memory) zero memory errors on all of the cards, DCRI at 30.

[xxoanser]

I have a very stable hashrate, and increase on it, but i have a bluescreen, with no errors in the claymore log

[wll1rah]

Anyone else had issues with vega 8 and 11 on the Ryzen 3 2200G or Ryzen 5 2400G?

Mine says it can't build DAG file.  It does work with spectre on my A6-7400K AMD Rig.  Just trying to figure out why the new gpu's don't work with this.  I've only tried version 11.0 and up.  Any idea's would be great.

I have tried with Ethminer and it does work with that program

[cryptoillusion1]

Hello, since Im, using ethermine server with SSL I'm reporting very low effective and actual rate,  before I was around 204 now dropped to 190. I have 0 invalid shares and stale around 5%. Anyone had same issue? Don't know if it is Claymore or Ethermine, switching back to non SSL server to see what happens.

https://www.dropbox.com/s/zr3wcbb8zds78rl/ssl.jpg?dl=0

same issue here- have switched to non-ssl version

[EvilHamster]

Sooo..Installed 11.2 on my Win10 64bit rig and disabled defender anti virus - worked ok for a little bit then after a few minutes of running my two 570's cards reduce in hash - 24 down to 10..to 7..and eventually 0, the two 550 remained aroun 9-11...

Im running two RX570 and two RX550 (all 4gb).

So.. Stopped the rig completely.

Put back decided to go back to the 10.6 that I found stable...

It wont go past:

AMD Cards available: 4
GPU #0: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 1:0:0)
GPU #0 recognized as Radeon RX 470/570
GPU #1: Baffin (Radeon RX 550 Series), 4096 MB available, 10 compute units (pci bus 6:0:0)
GPU #1 recognized as Radeon RX 460/560
GPU #2: Baffin (Radeon RX 550 Series), 4096 MB available, 10 compute units (pci bus 7:0:0)
GPU #2 recognized as Radeon RX 460/560
GPU #3: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #3 recognized as Radeon RX 470/570
POOL/SOLO version

None of the cards are clocked everything is standard from the box.

Anyone any ideas ?

I tried to download 11 - 11.1 and 11.2 again from Google - but Google wont allow it (?) says virus found used Mega instead.

Checked the logfile? This happened to me once I was oc and undervolt to much.

Many thanks for your help.

Bog standard no over clocking no bios mod - straight from box.

I'm wondering if it maybe the power supply - although everything is new.

Tried unplugging all but 1 gpu and it takes 70+ seconds just to get script to start to work.

[LearningGuy]

Some blocks were found in the last two hours? They will get it resolved - realistically mine-phun has been working hard on resolving a lot of challenges and it’s been enjoyable watching his perseverance on the task. Plus it’s better than causing your miner to hang.

I’m not an affiliate or anything of his, but hell he has tried hard and many of us have got good returns.

[d2bg]

24H effective hashrate has dropped about 10% since upgrading to v11.2 from 11.1, despite gaining maybe 1% in reported hashrate.  Using only 8gb 580s.  I think I'll stick with 11.1

[Ratledge]

Anyone else had issues with vega 8 and 11 on the Ryzen 3 2200G or Ryzen 5 2400G?

Mine says it can't build DAG file.  It does work with spectre on my A6-7400K AMD Rig.  Just trying to figure out why the new gpu's don't work with this.  I've only tried version 11.0 and up.  Any idea's would be great.

I have tried with Ethminer and it does work with that program

I haven't looked at the new iGPU type Ryzens yet, but - likely just not as easy and plugging them in and finding support for everything.  I know that a lot of people are finding that even recently made motherboards don't support them without a BIOS upgrade, which isn't possible if you don't have another CPU that works on it.

[yobigd20]

11.2 doesnt seem very stable.  i'm getting a lot of crashes on it whereas 11.0 is completely stable with the same oc settings.

[vimow]

Sooo..Installed 11.2 on my Win10 64bit rig and disabled defender anti virus - worked ok for a little bit then after a few minutes of running my two 570's cards reduce in hash - 24 down to 10..to 7..and eventually 0, the two 550 remained aroun 9-11...

Im running two RX570 and two RX550 (all 4gb).

So.. Stopped the rig completely.

Put back decided to go back to the 10.6 that I found stable...

It wont go past:

AMD Cards available: 4
GPU #0: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 1:0:0)
GPU #0 recognized as Radeon RX 470/570
GPU #1: Baffin (Radeon RX 550 Series), 4096 MB available, 10 compute units (pci bus 6:0:0)
GPU #1 recognized as Radeon RX 460/560
GPU #2: Baffin (Radeon RX 550 Series), 4096 MB available, 10 compute units (pci bus 7:0:0)
GPU #2 recognized as Radeon RX 460/560
GPU #3: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #3 recognized as Radeon RX 470/570
POOL/SOLO version

None of the cards are clocked everything is standard from the box.

Anyone any ideas ?

I tried to download 11 - 11.1 and 11.2 again from Google - but Google wont allow it (?) says virus found used Mega instead.

Same problem here, with a ryzen processor...
One card gpu 5 always went to 0.00 mh/s and I can't do anything. Changed risers, changed cables and psu tested separatedly and works fine...
Any advice will be highly appreciated (this crap happend after a windows update in my case)

[muzuca]

11.2 doesnt seem very stable.  i'm getting a lot of crashes on it whereas 11.0 is completely stable with the same oc settings.

I'm having the same issue in my RX 480 gpus. But, in my RX 580 rig, everything is fine and the hashpower increases a little bit.

[Bael]

Hi

I'm trying to mine keccak-c at http://yiimp.eu/

I use this bat line: stratum + tcp: //yiimp.eu: 5134 -dwal My_wallet_ crea dpsw c = CREA

And it does not work. Do you know if it's possible to mine keccak-c or is only possible keccak with Claymore?

regards!!

[tenmoi]

Hi guys, about dual ETH + XVG, how many coins do you actually get on daily basis and which HW and pool do you use?
It used to be a lot several weeks ago when Claymore introduced blake2s with 11.0. Around 700-80 coins/day with 6x RX580 if I remember well, even though all pools were very unstable at the time. Where do we stand today?

Thanks

Running Rx 570 4G. Nlpool. Dual mining at 6880 mz and get 6 xvgs per 3 hours. Unimining is a thief. Don't mind there.

[tenmoi]

Hi

I'm trying to mine keccak-c at http://yiimp.eu/

I use this bat line: stratum + tcp: //yiimp.eu: 5134 -dwal My_wallet_ crea dpsw c = CREA

And it does not work. Do you know if it's possible to mine keccak-c or is only possible keccak with Claymore?

regards!!

I don’t mine keccak, but I think you must type c=CREA as one word, no spaces in the word I mean.

[andrenym00]

Etherum only mining.  I set dcri to 25 and my hash rate went up and seems more stable.  I thought dcri was only  for dual mining? I did this because 11.2 says to press + or- in beginning.

[Cripto Boom]

Hi

I'm trying to mine keccak-c at http://yiimp.eu/

I use this bat line: stratum + tcp: //yiimp.eu: 5134 -dwal My_wallet_ crea dpsw c = CREA

And it does not work. Do you know if it's possible to mine keccak-c or is only possible keccak with Claymore?

regards!!

I don’t mine keccak, but I think you must type c=CREA as one word, no spaces in the word I mean.

I have been trying to mine Creative Coin too but everytime i try it rejects 100% of my shares, so im just mining smartcash right now, however if there is a way to mine Keccak-c and mine creative coin I would rather mine that, If anyone got it to work and wants to help out that would be great

[tmc1989]

Hello guys,

I have 6PCS Sapphire nitro+ rx580 4GB samsung Chipset, fresh installed Windows 10 x64 on mobo Biostar TB250-BTC. 5 GPUS running at 17.xx mhs and only 1 GPU running at 25.xx mhs. How to fix this issue in order to get all GPUS runnig at 25.xx mhs?


Thanks

[tenmoi]

Hello guys,

I have 6PCS Sapphire nitro+ rx580 samsung Chipset, fresh installed Windows 10 x64 on mobo Biostar TB250-BTC. 5 GPUS running at 17.xx mhs and only 1 GPU running at 25.xx mhs. How to fix this issue in order to get all GPUS runnig at 25.xx mhs?


Thanks

Those cards should do 30.xx if you mod the bios. There are lots of tutorials on YouTube. And check the amount of RAM of your card. 8G cards use different straps from those of 4G ones.