[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[citronick]

Claymore ETH Dual Miner v9.3:

- improved dual mining speed stability in ASM mode.
- added "-altnum" option for alternative GPU indexing.
- a few minor bug fixes and improvements.

[1714801292]

1714801292

[1714801292]

1714801292

[Tummler]

"Overclock Shit saved"

That's to the point.

[tytanick]

UPDATE v1094:
update/replaced claymore-eth-v9.2 by claymore-eth-v9.3
(reload/reboot to start using it if you are using 9.2 now)


Z170 / Z270 - 4G or other boot problems on your motherboard / Possible solution
I prepared few different verions of kernels with different boot settings.
If you had problem with current SMOS version, please check those below.
Download each image FROM the TOP and reflash it and tell me:
1. What problem you had
2. Which images didnt fixed this problem
3. Which images Fixed your problem
note. If you will have error AFTER 14'000'000 secotr in flashing, then ignore it and consider it flashed succesfully !


Please download and flash those images. Take first, flash, boot, if wont help take one below... etc ...
Please write what was your problem and REPLY which didnt fixed your problem and which DID.

https://beta.simplemining.net/download/simpleminer-RX-v1094-4.11.rc8-16.60-i915fw.imgc
https://beta.simplemining.net/download/simpleminer-RX-v1093-4.11.rc8-16.60-enablerc60.imgc
https://beta.simplemining.net/download/simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.imgc
https://beta.simplemining.net/download/simpleminer-RX-v1093-4.10.12-16.60-i915fw.imgc

[xTommYx]

Thank you so much Tytanic for the quick update.

My ISP actually blocks all the mining pool ports and i can still mine using a vpn on windows.
Is there ANY way i can do the same on SMoS ?

I have a wifi dongle, a 4g dongle. Is there any way i can install dongle drivers for it in SMoS?
I cannot connect to any mining pool which is not using port 80 or 443.

Please help or post a solution.
There are many people who use wifi as far as i have read in some miners posts.

[tytanick]

Thank you so much Tytanic for the quick update.

My ISP actually blocks all the mining pool ports and i can still mine using a vpn on windows.
Is there ANY way i can do the same on SMoS ?

I have a wifi dongle, a 4g dongle. Is there any way i can install dongle drivers for it in SMoS?
I cannot connect to any mining pool which is not using port 80 or 443.

Please help or post a solution.
There are many people who use wifi as far as i have read in some miners posts.

Yeah i saw your reply.
Your isp is blocking 80 and 443 ports ? Those are basic http and https ports so ISP is blocking all websites ?
If yes then try to find pool that uses differnet ports, there are plenty of them accually.
About VPN and WiFi on my OS i cant help wth that.
If you have problem with your ISP it would be reasonable to change it or meaby if you cant do that buy an smart router which can connect to VPN and forward all traffic throw it ?
I asw ASUS router have this function but never used. Propably it would be good idea that would solve all your internet problems (if your ISP wont block also VPN )

LITTLE UPDATE
I added New button "All rigs Actions" in BETA Dashbaord https://beta.simplemining.net - there is finally "Reset Restarts Counters" Action
Also i will need to remake miner selection table in order "not to look like shit" and then i will start making this fee system. After that more functions like rig grouping
Also i think its a good time to make some kind of live chat with me. As i dont want to lose time on adding it to my website i think temporary i will make SLACK.

[bitkuna]

simpleminer-RX-v1094-4.11.rc8-16.60-i915fw.imgc
- faster boot, no error messages about powertune
- no boot with above 4g decoding
- no boot above 3/4 gpu

[bitkuna]

simpleminer-RX-v1093-4.11.rc8-16.60-enablerc60.imgc
- no boot with above 4g option enabled
- no boot with 3 gpu

[tytanick]

Try disabling UEFI and olso do those:

- if not all gpus are working try changing PCI GEN to 2 or 1 or AUTO
- make integrated GPU as default
- upgrade bios to newest or not
- Use a Skylake processor
- enable 4G decoding

If non of those will help and also none from those images helps then i really have no idea

[bitkuna]

simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.imgc:
- does update after boot
- works with 3gpu, does not work with 5 gpu
- does not fully boot with above 4g decoding enabled

simpleminer-RX-v1093-4.10.12-16.60-i915fw.imgc
- not booting with above 4g enabled
- hangs at boot like the other with >4gpu


Maybe it's important, windows boot's only in UEFI mode with the above 4g option enabled. Without the above 4g option windows boots normal and uefi but only 6gpu will be loaded, 7th gpu will get error #12.

[Tummler]

Try disabling UEFI and olso do those:

- if not all gpus are working try changing PCI GEN to 2 or 1 or AUTO
- make integrated GPU as default
- upgrade bios to newest or not
- Use a Skylake processor
- enable 4G decoding

If non of those will help and also none from those images helps then i really have no idea

Tytanick,

I just wanted to confirm that I am still able to to boot smOS with above 4G decoding enabled on two separate MSI z170a M5 mobos.

To those of you having problems, are you running the Beta kernel (4.11rc3)?

Are you SURE you have downloaded and successfully installed MSI's updated bios (1.D)?

If you haven't updated the BIOS to 1.D, you will not be able to get it to boot properly with the board fully loaded with cards without doing some hacking on the BIOS.

[Gigasnike95]

UPDATE v1094:
update/replaced claymore-eth-v9.2 by claymore-eth-v9.3
(reload/reboot to start using it if you are using 9.2 now)


Z170 / Z270 - 4G or other boot problems on your motherboard / Possible solution
I prepared few different verions of kernels with different boot settings.
If you had problem with current SMOS version, please check those below.
Download each image FROM the TOP and reflash it and tell me:
1. What problem you had
2. Which images didnt fixed this problem
3. Which images Fixed your problem
note. If you will have error AFTER 14'000'000 secotr in flashing, then ignore it and consider it flashed succesfully !


Please download and flash those images. Take first, flash, boot, if wont help take one below... etc ...
Please write what was your problem and REPLY which didnt fixed your problem and which DID.

0ANDips0.imgc
https://beta.simplemining.net/download/simpleminer-RX-v1093-4.10.12-16.60-i915fw.imgc

Do you think this versions you've just updated could make a 7x 570 mining rig work?

If the answer is yes, then I will try it tomorrow and give you feedback

[BALTA00]

Hello tytanick, I want ask a question...

Many people in my country really like your system, but the vast majority do not know speak English, and do not know how to make bootable a pendrive with your system, I have been helping many, and has been through an idea ... Buy pendrives prepare them With your system and sell them, of course if you authorize me and give me your permission.

[bitkuna]

Try disabling UEFI and olso do those:

- if not all gpus are working try changing PCI GEN to 2 or 1 or AUTO
- make integrated GPU as default
- upgrade bios to newest or not
- Use a Skylake processor
- enable 4G decoding

If non of those will help and also none from those images helps then i really have no idea

Tytanick,

I just wanted to confirm that I am still able to to boot smOS with above 4G decoding enabled on two separate MSI z170a M5 mobos.

To those of you having problems, are you running the Beta kernel (4.11rc3)?

Are you SURE you have downloaded and successfully installed MSI's updated bios (1.D)?

If you haven't updated the BIOS to 1.D, you will not be able to get it to boot properly with the board fully loaded with cards without doing some hacking on the BIOS.

MSI Gaming Pro Carbon with the newest v1.7 bios. Any ideas?

[Tummler]

Try disabling UEFI and olso do those:

- if not all gpus are working try changing PCI GEN to 2 or 1 or AUTO
- make integrated GPU as default
- upgrade bios to newest or not
- Use a Skylake processor
- enable 4G decoding

If non of those will help and also none from those images helps then i really have no idea

Tytanick,

I just wanted to confirm that I am still able to to boot smOS with above 4G decoding enabled on two separate MSI z170a M5 mobos.

To those of you having problems, are you running the Beta kernel (4.11rc3)?

Are you SURE you have downloaded and successfully installed MSI's updated bios (1.D)?

If you haven't updated the BIOS to 1.D, you will not be able to get it to boot properly with the board fully loaded with cards without doing some hacking on the BIOS.

MSI Gaming Pro Carbon with the newest v1.7 bios. Any ideas?

I'm sorry to say that I am out of ideas beyond what I have posted over the last week or two. If you have tried everything I posted, I'm at a loss.

EDIT: You may want to compare the release date for the latest BIOS for your mobo with BIOS ver. 1.D for the z170a M5 board. If your BIOS predates 1.D, it may be that MSI hasn't updated your BIOS to handle more cards since my mobo couldn't handle a full set of cards without hacking until BIOS ver. 1.D.

[bughatti]

Just wandering if anyone is using an MSI rx570 4gb on smOS.  I have the armor version and just out of the box it is not recognized by smOS

[damprfield]

I've been fiddling around with different undervolts and settings - some reason using Powerstage @ 1 uses 10% more power than 2. Same hash rates and other settings, power usage measured @ plug.

Any idea whats going on?

[bitkuna]

Try disabling UEFI and olso do those:

- if not all gpus are working try changing PCI GEN to 2 or 1 or AUTO
- make integrated GPU as default
- upgrade bios to newest or not
- Use a Skylake processor
- enable 4G decoding

If non of those will help and also none from those images helps then i really have no idea

Tytanick,

I just wanted to confirm that I am still able to to boot smOS with above 4G decoding enabled on two separate MSI z170a M5 mobos.

To those of you having problems, are you running the Beta kernel (4.11rc3)?

Are you SURE you have downloaded and successfully installed MSI's updated bios (1.D)?

If you haven't updated the BIOS to 1.D, you will not be able to get it to boot properly with the board fully loaded with cards without doing some hacking on the BIOS.

MSI Gaming Pro Carbon with the newest v1.7 bios. Any ideas?

I'm sorry to say that I am out of ideas beyond what I have posted over the last week or two. If you have tried everything I posted, I'm at a loss.

EDIT: You may want to compare the release date for the latest BIOS for your mobo with BIOS ver. 1.D for the z170a M5 board. If your BIOS predates 1.D, it may be that MSI hasn't updated your BIOS to handle more cards since my mobo couldn't handle a full set of cards without hacking until BIOS ver. 1.D.

As windows boots only in uefi mode with "Above 4G decoding", maybe linux should be booted in uefi mode?

[espressodelisi]

I've setup this on my 3GPU rig. it runs fine.

I have a simple question: what should I enter in the fields of overclock setup? I want my GPU's run with different clocks because of heat issues. That field only allows one value for all gpus. I tried to enter values seperating with , (comma) but it did not work.

[RobertD]

I've setup this on my 3GPU rig. it runs fine.

I have a simple question: what should I enter in the fields of overclock setup? I want my GPU's run with different clocks because of heat issues. That field only allows one value for all gpus. I tried to enter values seperating with , (comma) but it did not work.

This works:
1250,1150,1100

This does not work:
1250, 1150,  1100
1250.11150.1100

[kaN5300]

Hello. Trying SMOS for the first time. All went fine except one. I get "No matching records found" in the dashbord. Rig is online. I can ssh into it.

Code:

root@simpleminer:~# telnet simplemining.net 443
Trying 104.25.183.36...
Connected to simplemining.net.
Escape character is '^]'.

Mining is running to authors wallet. Also tried

Code:

root@simpleminer:~/utils# ./update_status.sh

by hand. Got this cloudflare shit:

Code:

<!--[if lt IE 7]> <html class="no-js ie6 oldie" lang="en-US"> <![endif]-->
<!--[if IE 7]>    <html class="no-js ie7 oldie" lang="en-US"> <![endif]-->
<!--[if IE 8]>    <html class="no-js ie8 oldie" lang="en-US"> <![endif]-->
<!--[if gt IE 8]><!--> <html class="no-js" lang="en-US"> <!--<![endif]-->
<head>
<title>Attention Required! | Cloudflare</title>

*** cut ***

<h2 data-translate="why_captcha_headline">Why do I have to complete a CAPTCHA?</h2>

*** cut ***

Any idea what could go wrong? Workaround was to kill all cron staff and run claymore by hand with my own params
Maybe there is something else i should provide?

osVersion=1090
Linux simpleminer 4.11.0-041100rc3-generic #201703192331 SMP Mon Mar 20 03:33:57 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux

running behind a nat. ISP is not blocking or dpi-ing anything.

UPD: tytanick, i PM'd u some more info. Pls look.

UPD2: Burned another USB stick, enterd enother email in config, booted, still get "No matching records found" in dashboard.