[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[eth_mining]

I finally got Dag fix to work on one of my systems.  Thank you Tytanick!!

Is there a dag fix for linux yet? Can you detail or post instructions?

[Helioshel]

Hi. I have a question how much graphic cards this OS can handle?

[rebelmalangi]

Hi Folks,
              For Asus Z270-P mobo user if SMOS not working and giving PCIE Error or No Display after boot. Use below setting


 - Go Advanced ----> System Agent (SA) Configuration ----> Enable "Above 4 G Decoding"

(DMI/OPI CONFIGURATION --->DMI MAX LINK SPEED will stay at AUTO! or GEN2 Dont change these..)

(PEG PORT CONFIGURATION ---> PCIEX16_1 LINK SPEED will stay at AUTO ! or GEN2 Dont change these..)

Go back to Advanced, then PCH CONFIGUTATION ---> PCI Express Configuration----> change PCIe Speed to "GEN1" must be GEN1 . Auto and GEN2 do not working for SMOS.




Rebel
Kudos

[Didldak]

Guys, I just cannot get the undervolt working with my RX470 Nitros 4GB.. hynix memory.. I tried bioses with the automatic voltage, then with manual voltages and my powerdraw just doesnt go down..

[twofreckles]

Hi tytanick,
Can you stop with the time out on the website.
It is impossible now to manage our rigs we are always disconnected. My rigs are alive 24/7 so I need to be connected to the website 24/7 so can you stop the automatic disconnection.

If there is always disconnection there is no more interest in SMOS, we need a gui running with this OS.

Can you make a correction to this issue, thanks.

I second that. No idea why the page logs me out.

Also the individual login link was a great future. Why is it gone?

[tytanick]

Hi tytanick,
Can you stop with the time out on the website.
It is impossible now to manage our rigs we are always disconnected. My rigs are alive 24/7 so I need to be connected to the website 24/7 so can you stop the automatic disconnection.

If there is always disconnection there is no more interest in SMOS, we need a gui running with this OS.

Can you make a correction to this issue, thanks.

If you mean the Loggin Out.
Then yes it was a problem and it should be fixed now.
Thx for report.

I second that. No idea why the page logs me out.
Also the individual login link was a great future. Why is it gone?

I will make longer cookie duration, for example 48h.
Thats should do it.

[Fahim021]

HI, i am using 13 p106-100 msi card in 1 rig.  Since last 2 days I am getting error "binary file (standard input) matches simple mining" very often and rig freezes. It doesn't restart itself. Kindly help !!

[chuck732]

I loved this Simplemining OS for the first 3 days it ran. But now with overclocks not working I have a new problem. It's happen twice I fall a sleep and when I get up I see RED. All my cards are down and have to reboot. Why is this happening? What is casuing my cards to stop working?

[MichaelMiner]

Chuck732, don't overclock anything and see if it runs for a few days before playing with it again.

[MichaelMiner]

HI, i am using 13 p106-100 msi card in 1 rig.  Since last 2 days I am getting error "binary file (standard input) matches simple mining" very often and rig freezes. It doesn't restart itself. Kindly help !!

You need to  provide more information, this has no value, does the OS load? Does the miner start then fail?
Tough to help with out information.
If you have ANY overclocks, take them all out then reboot.

[chuck732]

How do you set the clocks back to stock? I tried removing the overclock on the core and it does nothing. On the dash it shows the same clocks overclock and stock are the same. It's like the overclock feature in Simplemining is broken. Does nothing, but I did notice the the power limit won't let you drop it down. My cards at first 5 days ago where averaging 115watts now they are averaging 177 watts. I'm lost here. It's like the cards are running at 100% power. Can someone PLEASE help me???

Chuck732, don't overclock anything and see if it runs for a few days before playing with it again.

[FirstRigger]

I would like to know too what about wattage?
I dont receive any reply. Nothing here and nothing direct from admin (from email).

I dont understand:
I mine dual (eth+lbc) with smOS, 11xRX580: 2150W from Wall WITH smOS undervolting/overclocking (1130@2175@850, stable)
I mine with the SAME RIG with other linux mining software with SAME undervolting/overclocking, I receive 1850W from Wall.

Same rig, everything same, only other linux program =300W diff.

Really nobody knows the answer? How can I/WE right setup the smOS undervolting?

[itongy]

Help me please... i cannot overclocking

Invalid MIT-MAGIC-COOKIE-1 keyFailed to connect to Mir: Failed to connect
to unable to init server: Could not connect: Connection refused

ERROR: The control display is undefined; please run 'ncidia-setting --help'

https://i.imgur.com/BHhBnCL.jpg

[chuck732]

I have it running but it likes to reboot it self alot. so far to day 18 times. The overclocking is messed up doesn't do crap. Dam it just rebooted while I'm typing this.

Here this might help you but not me. It's a guide.

https://docs.google.com/document/d/1SvtkI_ZCHAxqbIsaWnuA81hRbI3Tp2Zf3iyEQlORLTU/edit

Help me please... i cannot overclocking

Invalid MIT-MAGIC-COOKIE-1 keyFailed to connect to Mir: Failed to connect
to unable to init server: Could not connect: Connection refused

ERROR: The control display is undefined; please run 'ncidia-setting --help'

[chuck732]

I spent that day in a half trying to figure this out. I set the core overclock to 0 and the save reboot. Then I look at the dash and all the cores are overclocked to above 1900. I set the overclock to 25%, 50%, 75%, 100%, 125% and 150%. I even did -25% etc. and still 1900 overclock! Does nothing.  Started about 6 days ago or so. And power usage for my 1070's was 115 watts with the power limit set to 70%. Now for that last 3 days my power usage for these cards is 177 watts. I even set the power limit to 115 watts. It does nothing. Now for the last 3 days I keep getting a gpu has stopped and it restarts it if it can. I reboot works for a short time! So I change risers does nothing. I move cards, it last for maybe an hour then it does it again. I leave that pcie slot empty move the card to a different one. Does it again gpu stop's so i switch cards but not the same one as last time. And it still does it. GPU3 is driving me frekin nuts.

Sorry but I pay for a service and I expect it to at lease work.

Hi Guys,

I can confirm that there is still an issue with overclocking Nvidia cards. I'm also getting the the below error.
Invalid MIT-MAGIC-COOKIE-1 keyFailed to connect to Mir: Failed to connect to unable to init server: Could not connect: Connection refused

However the error only seems to happen when I reboot the rig and then it only affects one or two cards per rig.

A fix is to go to overclocking and click save without changing anything and when the miner restarts everything works perfectly - until the next reboot.

[tytanick]

Hi Guys,
I can confirm that there is still an issue with overclocking Nvidia cards. I'm also getting the the below error.
Invalid MIT-MAGIC-COOKIE-1 keyFailed to connect to Mir: Failed to connect to unable to init server: Could not connect: Connection refused
However the error only seems to happen when I reboot the rig and then it only affects one or two cards per rig.
A fix is to go to overclocking and click save without changing anything and when the miner restarts everything works perfectly - until the next reboot.

I probably know whats causing it and i just need to make some fix in my script.
Anyway if i am thinking right then this issue is only on slow pendrives.

The dummy and temporary fix could be:
/root/utils/rclocal.sh
change 31 line from
  sleep 6
to
sleep 20

The Xorg is starting too slow on slow pendrives and thats probably the issue.
I have pretty fast ones so i dont have this issue and this explains why reloading fixes this problem.

I will make some checkups first before miner starts.

[chuck732]

Tytanick,
      So you saying that if I get a faster USB stick it will solve my problems with overclocks and strange GPU3 stop's that move to different pcie slots?

Hi Guys,
I can confirm that there is still an issue with overclocking Nvidia cards. I'm also getting the the below error.
Invalid MIT-MAGIC-COOKIE-1 keyFailed to connect to Mir: Failed to connect to unable to init server: Could not connect: Connection refused
However the error only seems to happen when I reboot the rig and then it only affects one or two cards per rig.
A fix is to go to overclocking and click save without changing anything and when the miner restarts everything works perfectly - until the next reboot.

I probably know whats causing it and i just need to make some fix in my script.
Anyway if i am thinking right then this issue is only on slow pendrives.

The dummy and temporary fix could be:
/root/utils/rclocal.sh
change 31 line from
  sleep 6
to
sleep 20

The Xorg is starting too slow on slow pendrives and thats probably the issue.
I have pretty fast ones so i dont have this issue and this explains why reloading fixes this problem.

I will make some checkups first before miner starts.

[tytanick]

Tytanick,
      So you saying that if I get a faster USB stick it will solve my problems with overclocks and strange GPU3 stop's that move to different pcie slots?

Only OC problems.
The GPU3 stopped could be becasue of:
- too much OC (most common)
- bad riser (most common)
- some incompatibility in linux or incompatible motherboard bios (sometimes this is becasue if this yes - worth to try after rulling out above problems)
- bad gpu (slight chance)

[chuck732]

I have tried different risers, all brand new ver 6c from different makers. I have moved the gpu's around to different pcie slots. The motherboard has the newest bios update. The motherboard is a MSI Z170A G45. All the setting you said to do on your website I did. The only thing left is the overclock. Because all the gpu cores are overclocked above 1900 and I cannot lower them. I tried several times and the power usage of these gpu's is averaging 177 watt's and I cannot lower them either.
 The only thing left would have to be the USB thumb drive. If I get a faster one then I maybe able to lower the power usage and lower the core clocks.
What USB thumb drives are you talking about?

And thank you for your help!

 

Tytanick,
      So you saying that if I get a faster USB stick it will solve my problems with overclocks and strange GPU3 stop's that move to different pcie slots?

Only OC problems.
The GPU3 stopped could be becasue of:
- too much OC (most common)
- bad riser (most common)
- some incompatibility in linux or incompatible motherboard bios (sometimes this is becasue if this yes - worth to try after rulling out above problems)
- bad gpu (slight chance)

[xtoff]

Hi tytanick,
Can you stop with the time out on the website.
It is impossible now to manage our rigs we are always disconnected. My rigs are alive 24/7 so I need to be connected to the website 24/7 so can you stop the automatic disconnection.

If there is always disconnection there is no more interest in SMOS, we need a gui running with this OS.

Can you make a correction to this issue, thanks.

If you mean the Loggin Out.
Then yes it was a problem and it should be fixed now.
Thx for report.

yes the loggin Out

Allways the same thing log out after 1 hour or 2 hours

no change at all. I must log in each time since you upgrade the server.

:-(