vegasguy
Legendary
Offline
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 03, 2015, 08:42:34 PM |
|
While we are on the subject, has anyone been able to solve the issue with the "idle die". KNCminer SWEARS its because the heatsink is not tight enough. Out of the 13 cubes Ive tightened the single screw nearest the exhaust , Ive got 1 cube to work correctly. Its ALWAYS the top two dies #0 and #1. They "idle" at .8v, has ANYONE found a way to get these two dies to work again?
Vegas
|
I want to make sure everyone knows that I just released my software called "Yobit pump alert". THis is custom software that uses an algo to detect the start of a pump here on yobit, the second it starts. YOu can even filter the coins you see by price. Most pumps start less than 100 sats , so you can easily filter the cheap coins, so they are the only ones displayed https://bitcointalk.org/index.php?topic=1945937.msg20241953#msg20241953
|
|
|
GenTarkin
Legendary
Offline
Activity: 2450
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 03, 2015, 08:53:57 PM |
|
While we are on the subject, has anyone been able to solve the issue with the "idle die". KNCminer SWEARS its because the heatsink is not tight enough. Out of the 13 cubes Ive tightened the single screw nearest the exhaust , Ive got 1 cube to work correctly. Its ALWAYS the top two dies #0 and #1. They "idle" at .8v, has ANYONE found a way to get these two dies to work again?
Vegas
Um if you mean by idling dies when the dies drop off and no longer mine? Thats exactly what my firmware "bandaids" My firmware shuts off the cube w/ dies that have gone missing and then powers it back up. Restarts mining as needed.
|
|
|
|
jelin1984
Legendary
Offline
Activity: 2408
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 03, 2015, 10:04:11 PM |
|
Ok how we can install Your firmware Step by step details Please
|
|
|
|
GenTarkin
Legendary
Offline
Activity: 2450
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2015, 12:44:31 AM |
|
Ok how we can install Your firmware Step by step details Please
File is writeable via win32diskimager or dd 2GB SD card required set to DHCP for address acquiring Default clocks & voltages will be applied Settings will not be saved(such as pools) Any donations would be greatly welcome and appreciated. I hope to receive the .5BTC bounty as well =) 1Px71mWNQNKW19xuARqrmnbcem1dXqJ3At Im currently updating the img file to github. In the meantime if you want to try the img file out sooner.... --- Download & install bittorrent sync from getsync.com Once installed, on the upper right of program click Gear icon -> Manual Connection and paste this: https://link.getsync.com/#f=Titan_Firmware&sz=15E8&t=2&s=L6YEHRGEL3755IV2DVK4SK3MNHQMORDGW6AHYM3LHZMO5N55XLOQ&i=CEFQWBL6C4NVCTJUYOWNE7GEVLK2MYSRJ&v=2.0
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1464
Clueless!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2015, 02:51:22 AM |
|
Ok how we can install Your firmware Step by step details Please
File is writeable via win32diskimager or dd 2GB SD card required set to DHCP for address acquiring Default clocks & voltages will be applied Settings will not be saved(such as pools) Any donations would be greatly welcome and appreciated. I hope to receive the .5BTC bounty as well =) 1Px71mWNQNKW19xuARqrmnbcem1dXqJ3At Im currently updating the img file to github. In the meantime if you want to try the img file out sooner.... --- Download & install bittorrent sync from getsync.com Once installed, on the upper right of program click Gear icon -> Manual Connection and paste this: https://link.getsync.com/#f=Titan_Firmware&sz=15E8&t=2&s=L6YEHRGEL3755IV2DVK4SK3MNHQMORDGW6AHYM3LHZMO5N55XLOQ&i=CEFQWBL6C4NVCTJUYOWNE7GEVLK2MYSRJ&v=2.0Just to be clear all this upgrade does is if you have a die stop it will restart the particular cube ..do I have this correct? or is there more to this then that In that the cubes I have with bad dies they are shut to off (never got them to go at all) this patch may not be needed for someone in my situation I probably should copy it and set it aside thou in case i have the phantom loss of die issue every other day i've heard some titan owners have anyway just asking about any other reason to try your version out ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
Xantrax
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2015, 04:23:47 AM |
|
Someone know why the fuck i cant access the advanced setting on my titan batch 2? Is there something special to hit to start hashing once all info are completed ? Im not able to mine and a isee my 5 cubes Sad
|
|
|
|
vegasguy
Legendary
Offline
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2015, 04:56:40 AM |
|
This is for batch 2 titan correct? The factory voltages are much higher on batch 1 titans, so if this image is for batch 1 , dont apply to batch 2 titans or it will fry your cubes. Vegas Ok how we can install Your firmware Step by step details Please
File is writeable via win32diskimager or dd 2GB SD card required set to DHCP for address acquiring Default clocks & voltages will be applied Settings will not be saved(such as pools) Any donations would be greatly welcome and appreciated. I hope to receive the .5BTC bounty as well =) 1Px71mWNQNKW19xuARqrmnbcem1dXqJ3At Im currently updating the img file to github. In the meantime if you want to try the img file out sooner.... --- Download & install bittorrent sync from getsync.com Once installed, on the upper right of program click Gear icon -> Manual Connection and paste this: https://link.getsync.com/#f=Titan_Firmware&sz=15E8&t=2&s=L6YEHRGEL3755IV2DVK4SK3MNHQMORDGW6AHYM3LHZMO5N55XLOQ&i=CEFQWBL6C4NVCTJUYOWNE7GEVLK2MYSRJ&v=2.0
|
I want to make sure everyone knows that I just released my software called "Yobit pump alert". THis is custom software that uses an algo to detect the start of a pump here on yobit, the second it starts. YOu can even filter the coins you see by price. Most pumps start less than 100 sats , so you can easily filter the cheap coins, so they are the only ones displayed https://bitcointalk.org/index.php?topic=1945937.msg20241953#msg20241953
|
|
|
Prelude
Legendary
Offline
Activity: 1596
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2015, 05:22:02 AM |
|
This is for batch 2 titan correct? The factory voltages are much higher on batch 1 titans, so if this image is for batch 1 , dont apply to batch 2 titans or it will fry your cubes. Vegas Ok how we can install Your firmware Step by step details Please
File is writeable via win32diskimager or dd 2GB SD card required set to DHCP for address acquiring Default clocks & voltages will be applied Settings will not be saved(such as pools) Any donations would be greatly welcome and appreciated. I hope to receive the .5BTC bounty as well =) 1Px71mWNQNKW19xuARqrmnbcem1dXqJ3At Im currently updating the img file to github. In the meantime if you want to try the img file out sooner.... --- Download & install bittorrent sync from getsync.com Once installed, on the upper right of program click Gear icon -> Manual Connection and paste this: https://link.getsync.com/#f=Titan_Firmware&sz=15E8&t=2&s=L6YEHRGEL3755IV2DVK4SK3MNHQMORDGW6AHYM3LHZMO5N55XLOQ&i=CEFQWBL6C4NVCTJUYOWNE7GEVLK2MYSRJ&v=2.0Where are you getting the idea that batch 1 runs at higher voltage? It doesn't. Stock is -0.0366v.
|
|
|
|
vegasguy
Legendary
Offline
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2015, 01:44:31 PM |
|
Thank you, I thought somewhere I read that, but I was incorrect.
Thanks Vegas
|
I want to make sure everyone knows that I just released my software called "Yobit pump alert". THis is custom software that uses an algo to detect the start of a pump here on yobit, the second it starts. YOu can even filter the coins you see by price. Most pumps start less than 100 sats , so you can easily filter the cheap coins, so they are the only ones displayed https://bitcointalk.org/index.php?topic=1945937.msg20241953#msg20241953
|
|
|
vegasguy
Legendary
Offline
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2015, 01:45:18 PM |
|
Someone know why the fuck i cant access the advanced setting on my titan batch 2? Is there something special to hit to start hashing once all info are completed ? Im not able to mine and a isee my 5 cubes Sad
The last time this happend to me it was a bad micro sd card
|
I want to make sure everyone knows that I just released my software called "Yobit pump alert". THis is custom software that uses an algo to detect the start of a pump here on yobit, the second it starts. YOu can even filter the coins you see by price. Most pumps start less than 100 sats , so you can easily filter the cheap coins, so they are the only ones displayed https://bitcointalk.org/index.php?topic=1945937.msg20241953#msg20241953
|
|
|
vegasguy
Legendary
Offline
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2015, 02:46:37 PM |
|
Im still talking to Kncminer to see if I can get my cubes RMA. I just sent them a message to see if they will agree to the following terms.
I have 13 bad Titan Batch 2 cubes , about 8 of them have bad/idle dies that sit at .8 volts, Ive done the fix were they have you put a longer screw through the single screw near the exhaust, and put a nut underneath and of the 8 I tried this repair, none of them changed. I have 5 that have melted PCI-E connectors. So, Im under warranty and even sent them the email as proof. Ill report here on the results as they have informed me they watch this thread.
I told them I would try and fix as many as I could, this would involve my removing and cleaning the melted PCI-E connector and cleaning it. I did this on one that was not working and now it does. So I proposed to them that I fix as many as I could , and the ones that didnt work they would RMA, even the ones that have the melted PCI-E housing removed. Lets see what they say.
Vegas
|
I want to make sure everyone knows that I just released my software called "Yobit pump alert". THis is custom software that uses an algo to detect the start of a pump here on yobit, the second it starts. YOu can even filter the coins you see by price. Most pumps start less than 100 sats , so you can easily filter the cheap coins, so they are the only ones displayed https://bitcointalk.org/index.php?topic=1945937.msg20241953#msg20241953
|
|
|
GenTarkin
Legendary
Offline
Activity: 2450
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2015, 04:03:45 PM |
|
Ok how we can install Your firmware Step by step details Please
File is writeable via win32diskimager or dd 2GB SD card required set to DHCP for address acquiring Default clocks & voltages will be applied Settings will not be saved(such as pools) Any donations would be greatly welcome and appreciated. I hope to receive the .5BTC bounty as well =) 1Px71mWNQNKW19xuARqrmnbcem1dXqJ3At Im currently updating the img file to github. In the meantime if you want to try the img file out sooner.... --- Download & install bittorrent sync from getsync.com Once installed, on the upper right of program click Gear icon -> Manual Connection and paste this: https://link.getsync.com/#f=Titan_Firmware&sz=15E8&t=2&s=L6YEHRGEL3755IV2DVK4SK3MNHQMORDGW6AHYM3LHZMO5N55XLOQ&i=CEFQWBL6C4NVCTJUYOWNE7GEVLK2MYSRJ&v=2.0Just to be clear all this upgrade does is if you have a die stop it will restart the particular cube ..do I have this correct? or is there more to this then that In that the cubes I have with bad dies they are shut to off (never got them to go at all) this patch may not be needed for someone in my situation I probably should copy it and set it aside thou in case i have the phantom loss of die issue every other day i've heard some titan owners have anyway just asking about any other reason to try your version out ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Correct, if you have permanently damaged dies that cant be fixed as a result of powering off the miner and powering it back on... then this patch will do nothing for you. But if your dies randomly drop off while mining sometimes and a power cycle remedies the issue temporarily then ... this mod will do the power cycling of the particular cube having issues for you. In other words u dont have to baby sit the miner. Also my mod adds way more useful stats under the STATUS webgui.
|
|
|
|
GenTarkin
Legendary
Offline
Activity: 2450
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2015, 04:05:13 PM |
|
This is for batch 2 titan correct? The factory voltages are much higher on batch 1 titans, so if this image is for batch 1 , dont apply to batch 2 titans or it will fry your cubes. Vegas Ok how we can install Your firmware Step by step details Please
File is writeable via win32diskimager or dd 2GB SD card required set to DHCP for address acquiring Default clocks & voltages will be applied Settings will not be saved(such as pools) Any donations would be greatly welcome and appreciated. I hope to receive the .5BTC bounty as well =) 1Px71mWNQNKW19xuARqrmnbcem1dXqJ3At Im currently updating the img file to github. In the meantime if you want to try the img file out sooner.... --- Download & install bittorrent sync from getsync.com Once installed, on the upper right of program click Gear icon -> Manual Connection and paste this: https://link.getsync.com/#f=Titan_Firmware&sz=15E8&t=2&s=L6YEHRGEL3755IV2DVK4SK3MNHQMORDGW6AHYM3LHZMO5N55XLOQ&i=CEFQWBL6C4NVCTJUYOWNE7GEVLK2MYSRJ&v=2.0Well, as far as I know my titan is a B1 and its stock settings are -.0366v @ 300mhz Ive deleted the advanced.conf in the image(firmwarE) and Ive tested this does indeed restore the miner to default factory settings(clocks & voltages).
|
|
|
|
|
jelin1984
Legendary
Offline
Activity: 2408
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2015, 04:20:03 PM |
|
what better options have from original firmware?
|
|
|
|
GenTarkin
Legendary
Offline
Activity: 2450
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2015, 04:33:11 PM |
|
what better options have from original firmware?
I posted this a lil while back: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FJbz68gP.png&t=665&c=uflGjPQJABs6gQ)
|
|
|
|
Prelude
Legendary
Offline
Activity: 1596
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2015, 06:32:29 PM |
|
GenTarkin, I just tried your image, but the default login and password is not admin/admin so I couldn't log in to the Titan. What is the proper user name and password for your image?
|
|
|
|
GenTarkin
Legendary
Offline
Activity: 2450
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2015, 08:20:03 PM Last edit: August 04, 2015, 08:33:43 PM by GenTarkin |
|
GenTarkin, I just tried your image, but the default login and password is not admin/admin so I couldn't log in to the Titan. What is the proper user name and password for your image? Ah, my bad, didnt realize it was changed from default haha... admin/99e99
|
|
|
|
jelin1984
Legendary
Offline
Activity: 2408
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2015, 10:06:03 PM |
|
Any better performance with these firmware?
|
|
|
|
GenTarkin
Legendary
Offline
Activity: 2450
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2015, 10:16:32 PM |
|
Any better performance with these firmware?
Please go back through like the last couple pages of this topic and read everything Ive mentioned. Again, all this firmware does is bring "dropping dies" "sleeping dies" "braindead dies" ... or whatever you wanna call it.... back to life by automatically power cycling the cube that has the dropped die. I also added more stats to the STATUS page of webgui when you log in. I made this firmware primarily because of all the complaints about titan owners constantly experiencing dies that stop mining and they have to power cycle the whole miner in order to bring them back up. I experienced the same issue and had a feeling that the DCDC's were programmable and therefore could be issued a command to powercycle themselves and hopefully bring the die back into an operational state w/o any interference from the operator. It was successful and hence I decided to make my own release =) Future changes may be an updated bfgminer and ability to OC to 350mhz, but Ive seen nowhere on how to do this. I do see some areas in the source code provided on KNC's github that MAY affect clocks but I dont know if simply adding a 350mhz value would do anything at all. I would like to see working documentation or examples of this from known sources OR from KNC's other products and perhaps I can figure it out from that.
|
|
|
|
|