swanny88
Newbie
Offline
Activity: 103
Merit: 0
|
|
March 31, 2018, 02:58:55 PM |
|
Did one of these 2Pac sticks ever find a block? I know the odds are crazy high but just curious.
|
|
|
|
marousi
Newbie
Offline
Activity: 123
Merit: 0
|
|
March 31, 2018, 03:16:53 PM |
|
Doubt it, theoretically possible, but really they are toys. Impossible to keep them running continously.
|
|
|
|
zac123
Newbie
Offline
Activity: 114
Merit: 0
|
|
March 31, 2018, 03:20:10 PM |
|
Doubt it, theoretically possible, but really they are toys. Impossible to keep them running continously.
what makes you say that? i was thinking of setting them to restart every 12hrs or so. i think that should keep them going
|
|
|
|
marousi
Newbie
Offline
Activity: 123
Merit: 0
|
|
March 31, 2018, 03:33:43 PM |
|
how to set them to restart every 12 hours? please explain
|
|
|
|
zac123
Newbie
Offline
Activity: 114
Merit: 0
|
|
March 31, 2018, 04:17:51 PM |
|
how to set them to restart every 12 hours? please explain
Well I saw a post by a guy that set a cron job like a scheduled task basically that did the restart. I think he had his rig running on a rasbery pi
|
|
|
|
lok8nusa
Member
Offline
Activity: 254
Merit: 11
Call 811 before you dig
|
|
March 31, 2018, 04:44:53 PM |
|
how to set them to restart every 12 hours? please explain
Well I saw a post by a guy that set a cron job like a scheduled task basically that did the restart. I think he had his rig running on a rasbery pi For Windows, I use AutoHotkey to make/run a script that will close and restart cgminer on a timed basis. You can use a smart plug to hard-reset your hub. cron job is the way to go for linux/RasPi.
|
Coining bits since 2017 Kano Pool is the BEST BTC mining pool.
|
|
|
der_wasi
|
|
March 31, 2018, 05:04:27 PM |
|
Hi thanks for the reply. Yes trying them on their own was the first thing I did. Black one is stable green one not.
Try turning the voltage pot to 3 o´clock with the USB port at bottom and view on the pot. Then set the frequency to 100 MHz. Then set the frequency to 175 or 200 MHz. If there are HW errors coming in, turn the pot clockwise until they stop coming in. Maybe you have set the pot too high already. Doubt it, theoretically possible, but really they are toys. Impossible to keep them running continously.
I think moste of the people here, me included, have got them running continously. So I won´t say it´s impossible. My oppinion is, it wasn´t even hard. Mine are running for weeks without any issues. Only the PI freezes occasionally. But even that happened once or twice in the last months.
|
|
|
|
marousi
Newbie
Offline
Activity: 123
Merit: 0
|
|
March 31, 2018, 06:19:19 PM Last edit: April 01, 2018, 07:15:48 AM by marousi |
|
Ok, running continuously at say 250 mhz? or higher? My setup is 6 2pacs, 2 2pacs/powered usb hub running at 200 mhz. holding the 2pac with the usb port down, the screw is set to 5 Oclock. They do not run continously. Don't know why?
|
|
|
|
morktadela
Newbie
Offline
Activity: 13
Merit: 0
|
|
April 01, 2018, 07:55:46 AM |
|
Hi, sorry if answered before, i was used search and not find answer. In other hands I don't read 90 pages, only 3 first (sorry guys). I have 2 similar setups: * raspberry pi * sipolar usb hub * 2 gekkoscience 2pac The main difference is one setup has 2pac US (GSD) and the other one have EU (BSD). I was installed with 2 month of difference. The US ones first and 2 or 3 months after EU setup. I have a problem that cgminer shows different in EU. It's more log rather than US is like "window". https://i.imgur.com/ZN38SuA.pngAnd the EU: https://i.imgur.com/HQK3oWf.pngThe question is, how could I switch between this to views? In some cases I need to work with the first one, in other moments I need the second one with log format. I'm running the same command in two cases, for me is a mystery why in one rpi are showing in log format. Thanks
|
|
|
|
zac123
Newbie
Offline
Activity: 114
Merit: 0
|
|
April 01, 2018, 07:59:43 AM |
|
how to set them to restart every 12 hours? please explain
Well I saw a post by a guy that set a cron job like a scheduled task basically that did the restart. I think he had his rig running on a rasbery pi For Windows, I use AutoHotkey to make/run a script that will close and restart cgminer on a timed basis. You can use a smart plug to hard-reset your hub. cron job is the way to go for linux/RasPi. nice info, thanks
|
|
|
|
der_wasi
|
|
April 01, 2018, 09:28:06 AM |
|
Ok, running continuously at say 250 mhz? or higher? My setup is 6 2pacs, 2 2pacs/powered usb hub running at 200 mhz. holding the 2pac with the usb port down, the screw is set to 5 Oclock. They do not run continously. Don't know why?
Like I wrote a few times before, I have two 2Pacs. Each one in a 30 W Hub. Both running at 350 MHz. Voltage pot is set about 6 or 7 o´clock. Each one cooled with a Arctic Breeze fan. Both controlled by one RPi with cgminer. I have a problem that cgminer shows different in EU. It's more log rather than US is like "window". https://i.imgur.com/ZN38SuA.pngAnd the EU: https://i.imgur.com/HQK3oWf.pngThe question is, how could I switch between this to views? In some cases I need to work with the first one, in other moments I need the second one with log format. I'm running the same command in two cases, for me is a mystery why in one rpi are showing in log format. Can you post the cgminer.conf file you are using? Does it have the --text-only option? Or do you start with this option? The option -t is the same? Do you use this one?
|
|
|
|
morktadela
Newbie
Offline
Activity: 13
Merit: 0
|
|
April 01, 2018, 08:08:13 PM |
|
Can you post the cgminer.conf file you are using? Does it have the --text-only option? Or do you start with this option? The option -t is the same? Do you use this one?
I'm not using conf file and neither --text-only Only executing command: sudo ./cgminer -o stratum+tcp://pool.ckpool.org:3333 -u btcaddress -p xxx --suggest-diff 32 --gekko-2pac-freq 225
Thanks
|
|
|
|
vezpit
|
|
April 01, 2018, 09:34:14 PM |
|
May be worth checking the display option (D). One may have verbose (V) turned on. Hard to tell from the photos.
|
|
|
|
sidehack
Legendary
Offline
Activity: 3360
Merit: 1858
Curmudgeonly hardware guy
|
|
April 01, 2018, 09:46:01 PM |
|
You were missing a dependency while compiling, I think curses but I could be wrong. Make sure you have all the dependency packages per the first post instructions and re-compile.
|
|
|
|
zac123
Newbie
Offline
Activity: 114
Merit: 0
|
|
April 02, 2018, 08:19:54 AM |
|
Hi thanks for the reply. Yes trying them on their own was the first thing I did. Black one is stable green one not.
Try turning the voltage pot to 3 o´clock with the USB port at bottom and view on the pot. Then set the frequency to 100 MHz. Then set the frequency to 175 or 200 MHz. If there are HW errors coming in, turn the pot clockwise until they stop coming in. Maybe you have set the pot too high already. Doubt it, theoretically possible, but really they are toys. Impossible to keep them running continously.
I think moste of the people here, me included, have got them running continously. So I won´t say it´s impossible. My oppinion is, it wasn´t even hard. Mine are running for weeks without any issues. Only the PI freezes occasionally. But even that happened once or twice in the last months. thanks for your help on this. currently have the pots pointing towards 5 o'clock running at 250htz. i get about 24hrs until they need restarting with ~9 hardwre faults. still tweeking. my aim is to have them running @ 300 stable. we'll see. but its good fun getting it all work. the long term plan it to have 5 of these running on a ras-pi in a little cooled box that i'm designing so it can sit on my desk at work :-) zac
|
|
|
|
der_wasi
|
|
April 02, 2018, 10:56:35 AM |
|
currently have the pots pointing towards 5 o'clock running at 250htz. i get about 24hrs until they need restarting with ~9 hardwre faults.
still tweeking. my aim is to have them running @ 300 stable. we'll see. but its good fun getting it all work. the long term plan it to have 5 of these running on a ras-pi in a little cooled box that i'm designing so it can sit on my desk at work :-)
zac
Are you still running one at a time? Are you able to run one alone at 200 MHz at 3 o´clock? I think that 3 Amps isn´t enough for 250 MHz to run stable. What happens after 24 hours? Do they go zombie? In my experience putting them into a box isn´t the best solution. I tried this, even with an open case and two fans. They get hotter than with my current setup, open just inside the hub with the arctic breeze fans.
|
|
|
|
zac123
Newbie
Offline
Activity: 114
Merit: 0
|
|
April 02, 2018, 12:27:46 PM |
|
Are you still running one at a time? Are you able to run one alone at 200 MHz at 3 o´clock? I think that 3 Amps isn´t enough for 250 MHz to run stable. What happens after 24 hours? Do they go zombie?
In my experience putting them into a box isn´t the best solution. I tried this, even with an open case and two fans. They get hotter than with my current setup, open just inside the hub with the arctic breeze fans.
yes i think you are correct about the usb hub. ok so what i'm testing now is this: - BSD 10014358
- 3 o'clock position
- 200 freq
i'll next be able to check it about 17:00hrs UK time. that's approx 28hrs time
|
|
|
|
der_wasi
|
|
April 02, 2018, 12:52:34 PM |
|
i'll next be able to check it about 17:00hrs UK time. that's approx 28hrs time
OK. Then let me know if it worked.
|
|
|
|
morktadela
Newbie
Offline
Activity: 13
Merit: 0
|
|
April 02, 2018, 05:39:13 PM |
|
You were missing a dependency while compiling, I think curses but I could be wrong. Make sure you have all the dependency packages per the first post instructions and re-compile.
Thanks, I was followed Ubuntu instructions instead of Debian. I was installed missing dependencies, recompiled and it's working.
|
|
|
|
zac123
Newbie
Offline
Activity: 114
Merit: 0
|
|
April 03, 2018, 04:43:36 PM |
|
i'll next be able to check it about 17:00hrs UK time. that's approx 28hrs time
OK. Then let me know if it worked. ok good news.... its been mining since my last post at 200hertz, 3 0'clock position. it is showing 15 hardware errors. so, should the next test be to up the hertz on this one or test the other stick at 200 .... hmm. zac
|
|
|
|
|