Bitcoin Forum
November 15, 2018, 03:31:41 AM *
News: Latest Bitcoin Core release: 0.17.0 [Torrent].
 
   Home   Help Search Login Register More  
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 [50] 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ... 105 »
  Print  
Author Topic: GekkoScience 2Pac/Compac BM1384 Stickminer Official Support Thread  (Read 147912 times)
This is a self-moderated topic. If you do not want to be moderated by the person who started this topic, create a new topic.
rv3dpi
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
November 03, 2017, 10:08:11 AM
 #981

Good afternoon!
Please help me with the launch of 2Pac with Cgminer.
As I understand it, I need a special assembly of the program and drivers. The drivers is installed, the classic cgminer launched, now it sees the device, but only after the hotplug.
The speed is low, about 500 Mh / s
Build cgminer-4.10.0-windows-gekko from the first post, for some reason I can not download, the site writes "forbidden".
It's hard for me to read in einglish, I'm from Russia. There is no information on this device in the runet.

If possible, send me the cgminer-4.10.0-windows-gekko archive to e-mail: rv3dpi@yandex.ru

Sorry for possible errors, the text was translated automatically.
1542252701
Hero Member
*
Offline Offline

Posts: 1542252701

View Profile Personal Message (Offline)

Ignore
1542252701
Reply with quote  #2

1542252701
Report to moderator
1542252701
Hero Member
*
Offline Offline

Posts: 1542252701

View Profile Personal Message (Offline)

Ignore
1542252701
Reply with quote  #2

1542252701
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1542252701
Hero Member
*
Offline Offline

Posts: 1542252701

View Profile Personal Message (Offline)

Ignore
1542252701
Reply with quote  #2

1542252701
Report to moderator
sidehack
Legendary
*
Offline Offline

Activity: 1876
Merit: 1258

Curmudgeonly hardware guy


View Profile
November 03, 2017, 12:18:18 PM
 #982

(I just thought it especially funny that a guy called "the searcher" would ask such an obviously easy question without searching to see if it had already been answered a hundred times. I like to help people, but mostly people who at least try to help themselves first.)

Got a new 28-135GH stick miner!
Currently in development - 100+GH USB stick; 800GH 60W pod; 6TH volt-adjustable S1/3/5 upgrade kit
Server PSU interface boards and cables. USB and small-scale miners. Hardware hosting, advice and odd-jobs. Supporting the home miner community since 2013 - http://www.gekkoscience.com
hookthem
Newbie
*
Offline Offline

Activity: 51
Merit: 0


View Profile
November 03, 2017, 12:31:56 PM
 #983

Alright i appoigise fellas, is there any chance i can get some one to break it down barney style for me? i am new to this and would really like to get my 4 2 pacs up and in motion. thanks guys

Where are you in the process that is outlined in the first post of this thread?  It would help tremendously to know what you've done so far, what equipment you're using, etc.
der_wasi
Member
**
Offline Offline

Activity: 111
Merit: 10


View Profile WWW
November 03, 2017, 05:48:04 PM
 #984

Build cgminer-4.10.0-windows-gekko from the first post, for some reason I can not download, the site writes "forbidden".
On what system are you trying? On Linux you can just clone it with the "git clone" command.

sunk818
Full Member
***
Offline Offline

Activity: 476
Merit: 110



View Profile
November 03, 2017, 06:15:45 PM
 #985

Alright i appoigise fellas, is there any chance i can get some one to break it down barney style for me? i am new to this and would really like to get my 4 2 pacs up and in motion. thanks guys

What don't you show us some effort? What have you tried? What is not working for you. Your post shows no indication that you've attempted anything.
rv3dpi
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
November 03, 2017, 06:47:01 PM
 #986

On what system are you trying? On Linux you can just clone it with the "git clone" command.

Sorry, I understood my mistake.
Thank you
gogutzoy
Newbie
*
Offline Offline

Activity: 1
Merit: 0


View Profile
November 05, 2017, 09:47:19 AM
 #987

I have the same message(bellow).... on windows on ubuntu with all drivers and on all pools .
The connection to the pool seems to work i have tried with telnet abut my devices are still not working. IS it possible that the gekko devices to have some issues?

Can someone suggest me other work around ?
Thanks!


============================================================================
[2017-11-05 11:33:10.132] Started cgminer 4.10.0                   
 [2017-11-05 11:33:10.492] Probing for an alive pool                   
 [2017-11-05 11:33:10.595] Found 2 chip(s) on BSD 0                   
 [2017-11-05 11:33:20.599] Waiting for work to be available from pools.                   
 [2017-11-05 11:34:10.503] No servers were found that could be used to get work from.                   
 [2017-11-05 11:34:10.503] Please check the details from the list below of the servers you have input                   
 [2017-11-05 11:34:10.503] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers                   
 [2017-11-05 11:34:10.503] Pool: 0  URL: stratum+tcp://mmpool.org:3333  User: user  Password: x                   
 [2017-11-05 11:34:10.503] No servers could be used! Exiting. 
========================================================================
sidehack
Legendary
*
Offline Offline

Activity: 1876
Merit: 1258

Curmudgeonly hardware guy


View Profile
November 05, 2017, 01:48:49 PM
 #988

Somehow, everything you said is wrong.

"on windows on ubuntu" makes no sense.

"the connection to the pool seems to work" is invalidated by the fact your error message is summarized as "you typed in the pool info wrong so it won't work".

Got a new 28-135GH stick miner!
Currently in development - 100+GH USB stick; 800GH 60W pod; 6TH volt-adjustable S1/3/5 upgrade kit
Server PSU interface boards and cables. USB and small-scale miners. Hardware hosting, advice and odd-jobs. Supporting the home miner community since 2013 - http://www.gekkoscience.com
btman123
Newbie
*
Offline Offline

Activity: 13
Merit: 0


View Profile
November 07, 2017, 01:37:52 AM
 #989

I have the same message(bellow).... on windows on ubuntu with all drivers and on all pools .
The connection to the pool seems to work i have tried with telnet abut my devices are still not working. IS it possible that the gekko devices to have some issues?

Can someone suggest me other work around ?
Thanks!


============================================================================
[2017-11-05 11:33:10.132] Started cgminer 4.10.0                   
 [2017-11-05 11:33:10.492] Probing for an alive pool                   
 [2017-11-05 11:33:10.595] Found 2 chip(s) on BSD 0                   
 [2017-11-05 11:33:20.599] Waiting for work to be available from pools.                   
 [2017-11-05 11:34:10.503] No servers were found that could be used to get work from.                   
 [2017-11-05 11:34:10.503] Please check the details from the list below of the servers you have input                   
 [2017-11-05 11:34:10.503] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers                   
 [2017-11-05 11:34:10.503] Pool: 0  URL: stratum+tcp://mmpool.org:3333  User: user  Password: x                   
 [2017-11-05 11:34:10.503] No servers could be used! Exiting. 
========================================================================


I have same issue. Running on Ubuntu 16.04. Built cgminer as instructed. Tried telnet solo.ckpool.org 3333, and it works. Also tried slushpool with similar outcome. Have 3 BM1384, all produce same result. I would greatly appreciate any hint as I am running out of ideas.

cgminer --url stratum+tcp://solo.ckpool.org:3333 -u 3DKHBZcT6qR5KGJLJzL3LRVEnHSSHcVrb1.0 -p x
 [2017-11-06 20:31:27.190] Started cgminer 4.10.0                   
 [2017-11-06 20:31:27.711] Probing for an alive pool                   
 [2017-11-06 20:31:27.816] Found 2 chip(s) on GSD 0                   
 [2017-11-06 20:31:37.820] Waiting for work to be available from pools.                   
 [2017-11-06 20:32:27.717] No servers were found that could be used to get work from.                   
 [2017-11-06 20:32:27.717] Please check the details from the list below of the servers you have input                   
 [2017-11-06 20:32:27.717] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers                   
 [2017-11-06 20:32:27.717] Pool: 0  URL: stratum+tcp://solo.ckpool.org:3333  User: 3DKHBZcT6qR5KGJLJzL3LRVEnHSSHcVrb1.0  Password: x                   
 [2017-11-06 20:32:27.717] No servers could be used! Exiting.   
sidehack
Legendary
*
Offline Offline

Activity: 1876
Merit: 1258

Curmudgeonly hardware guy


View Profile
November 07, 2017, 02:05:55 AM
 #990

Gonna guess it's an issue completely unrelated to these sticks. Might check the cgminer thread.

Got a new 28-135GH stick miner!
Currently in development - 100+GH USB stick; 800GH 60W pod; 6TH volt-adjustable S1/3/5 upgrade kit
Server PSU interface boards and cables. USB and small-scale miners. Hardware hosting, advice and odd-jobs. Supporting the home miner community since 2013 - http://www.gekkoscience.com
Biodom
Legendary
*
Offline Offline

Activity: 1764
Merit: 1079


View Profile
November 07, 2017, 05:38:41 AM
 #991


I have same issue. Running on Ubuntu 16.04. Built cgminer as instructed. Tried telnet solo.ckpool.org 3333, and it works. Also tried slushpool with similar outcome. Have 3 BM1384, all produce same result. I would greatly appreciate any hint as I am running out of ideas.

cgminer --url stratum+tcp://solo.ckpool.org:3333 -u 3DKHBZcT6qR5KGJLJzL3LRVEnHSSHcVrb1.0 -p x
 

telnet? why? besides, you posted something that can't work.

CNTRL-alt-T
if you followed instruction re building EXACTLY, then

go to post #1 "Run syntax" and do as described for Linux.
Figure out the logic of the command, where is the miner executable (in which folder), get to this folder using CLI, then issue the command as described in post #1.

Do you really want to mine to solo? Chances are you would get nothing vs maybe getting some satoshi's elsewhere.



rv3dpi
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
November 07, 2017, 10:10:08 AM
 #992

On what system are you trying? On Linux you can just clone it with the "git clone" command.

I'm trying on Win 7 x86 and Win 10 x64
On Linux Rosa using the "git clone" command I get the same result - error 443
Gekkoboy
Newbie
*
Offline Offline

Activity: 1
Merit: 0


View Profile
November 07, 2017, 12:57:15 PM
 #993

Hi there  the gekko science 2pac run on raspberry pi  3 model B+?
btman123
Newbie
*
Offline Offline

Activity: 13
Merit: 0


View Profile
November 07, 2017, 02:40:55 PM
 #994


I have same issue. Running on Ubuntu 16.04. Built cgminer as instructed. Tried telnet solo.ckpool.org 3333, and it works. Also tried slushpool with similar outcome. Have 3 BM1384, all produce same result. I would greatly appreciate any hint as I am running out of ideas.

cgminer --url stratum+tcp://solo.ckpool.org:3333 -u 3DKHBZcT6qR5KGJLJzL3LRVEnHSSHcVrb1.0 -p x
 

telnet? why? besides, you posted something that can't work.

CNTRL-alt-T
if you followed instruction re building EXACTLY, then

go to post #1 "Run syntax" and do as described for Linux.
Figure out the logic of the command, where is the miner executable (in which folder), get to this folder using CLI, then issue the command as described in post #1.

Do you really want to mine to solo? Chances are you would get nothing vs maybe getting some satoshi's elsewhere.





Telnet is generally used to see if one can connect to an end point. End point being  'solo.ckpool.org 3333'. I did find that the bc address I provied is incorrect.  Assuming that address is correct what else can I try?
Here is another attempt with correct address and debug options


cgminer -o stratum+tcp://solo.ckpool.org:3333 -u 3E2m8V8dQvSQDJMHQD5dcCHM5AhYQDP6ti.0 -p x -D -P --verbose
 [2017-11-07 09:38:32.156] Started cgminer 4.10.0                   
 [2017-11-07 09:38:32.156] USB scan devices: checking for GSX devices                   
 [2017-11-07 09:38:32.156] RES: thread starting                   
 [2017-11-07 09:38:32.322] GSX looking for BSC 10c4:ea60 but found 8087:0024 instead                   
 [2017-11-07 09:38:32.322] GSX looking for BSD 10c4:ea60 but found 8087:0024 instead                   
 [2017-11-07 09:38:32.322] GSX looking for BSE 10c4:ea60 but found 8087:0024 instead                   
 [2017-11-07 09:38:32.322] GSX looking for GSC 10c4:ea60 but found 8087:0024 instead                   
 [2017-11-07 09:38:32.322] GSX looking for GSD 10c4:ea60 but found 8087:0024 instead                   
 [2017-11-07 09:38:32.322] GSX looking for GSE 10c4:ea60 but found 8087:0024 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSC 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSD 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSE 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSC 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSD 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSE 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSC 10c4:ea60 but found 5986:02d5 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSD 10c4:ea60 but found 5986:02d5 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSE 10c4:ea60 but found 5986:02d5 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSC 10c4:ea60 but found 5986:02d5 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSD 10c4:ea60 but found 5986:02d5 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSE 10c4:ea60 but found 5986:02d5 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSC 10c4:ea60 but found 0a5c:21e6 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSD 10c4:ea60 but found 0a5c:21e6 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSE 10c4:ea60 but found 0a5c:21e6 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSC 10c4:ea60 but found 0a5c:21e6 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSD 10c4:ea60 but found 0a5c:21e6 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSE 10c4:ea60 but found 0a5c:21e6 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSC 10c4:ea60 but found 147e:2020 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSD 10c4:ea60 but found 147e:2020 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSE 10c4:ea60 but found 147e:2020 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSC 10c4:ea60 but found 147e:2020 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSD 10c4:ea60 but found 147e:2020 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSE 10c4:ea60 but found 147e:2020 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSC 10c4:ea60 but found 8087:0024 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSD 10c4:ea60 but found 8087:0024 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSE 10c4:ea60 but found 8087:0024 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSC 10c4:ea60 but found 8087:0024 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSD 10c4:ea60 but found 8087:0024 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSE 10c4:ea60 but found 8087:0024 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSC 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSD 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSE 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSC 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSD 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.323] GSX looking for GSE 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSC 10c4:ea60 but found 0480:a00c instead                   
 [2017-11-07 09:38:32.323] GSX looking for BSD 10c4:ea60 but found 0480:a00c instead                   
 [2017-11-07 09:38:32.324] GSX looking for BSE 10c4:ea60 but found 0480:a00c instead                   
 [2017-11-07 09:38:32.324] GSX looking for GSC 10c4:ea60 but found 0480:a00c instead                   
 [2017-11-07 09:38:32.324] GSX looking for GSD 10c4:ea60 but found 0480:a00c instead                   
 [2017-11-07 09:38:32.324] GSX looking for GSE 10c4:ea60 but found 0480:a00c instead                   
 [2017-11-07 09:38:32.324] GSX looking for BSC 10c4:ea60 but found 2109:0812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for BSD 10c4:ea60 but found 2109:0812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for BSE 10c4:ea60 but found 2109:0812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for GSC 10c4:ea60 but found 2109:0812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for GSD 10c4:ea60 but found 2109:0812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for GSE 10c4:ea60 but found 2109:0812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for BSC 10c4:ea60 but found 2109:0812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for BSD 10c4:ea60 but found 2109:0812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for BSE 10c4:ea60 but found 2109:0812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for GSC 10c4:ea60 but found 2109:0812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for GSD 10c4:ea60 but found 2109:0812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for GSE 10c4:ea60 but found 2109:0812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for BSC 10c4:ea60 but found 1d6b:0003 instead                   
 [2017-11-07 09:38:32.324] GSX looking for BSD 10c4:ea60 but found 1d6b:0003 instead                   
 [2017-11-07 09:38:32.324] GSX looking for BSE 10c4:ea60 but found 1d6b:0003 instead                   
 [2017-11-07 09:38:32.324] GSX looking for GSC 10c4:ea60 but found 1d6b:0003 instead                   
 [2017-11-07 09:38:32.324] GSX looking for GSD 10c4:ea60 but found 1d6b:0003 instead                   
 [2017-11-07 09:38:32.324] GSX looking for GSE 10c4:ea60 but found 1d6b:0003 instead                   
 [2017-11-07 09:38:32.324] GSX looking for BSC 10c4:ea60 but found 2109:2812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for BSD 10c4:ea60 but found 2109:2812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for BSE 10c4:ea60 but found 2109:2812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for GSC 10c4:ea60 but found 2109:2812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for GSD 10c4:ea60 but found 2109:2812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for GSE 10c4:ea60 but found 2109:2812 instead                   
 [2017-11-07 09:38:32.324] GSX looking for and found BSC 10c4:ea60                   
 [2017-11-07 09:38:32.324] USB lock GekkoScience 3-17                   
 [2017-11-07 09:38:32.324] RES: GekkoScience (3:17) lock=1                   
 [2017-11-07 09:38:32.324] USB res lock GekkoScience 3-17                   
 [2017-11-07 09:38:32.324] RES: GekkoScience (3:17) lock ok=1                   
 [2017-11-07 09:38:32.558] USB init, iManufacturer mismatch - BSC device 3:17                   
 [2017-11-07 09:38:32.559] Found GekkoScience vs bitshopperde                   
 [2017-11-07 09:38:32.559] USB free BSC                   
 [2017-11-07 09:38:32.559] USB init, kernel attached ... - BSD device 3:17                   
 [2017-11-07 09:38:32.560] USB init, kernel detached ifinfo 0 interface 0 successfully - BSD device 3:17                   
 [2017-11-07 09:38:32.560] USB init, iManufacturer mismatch - BSD device 3:17                   
 [2017-11-07 09:38:32.560] Found GekkoScience vs bitshopperde                   
 [2017-11-07 09:38:32.561] USB free BSD                   
 [2017-11-07 09:38:32.561] USB init, kernel attached ... - BSE device 3:17                   
 [2017-11-07 09:38:32.561] USB init, kernel detached ifinfo 0 interface 0 successfully - BSE device 3:17                   
 [2017-11-07 09:38:32.561] USB init, iManufacturer mismatch - BSE device 3:17                   
 [2017-11-07 09:38:32.561] Found GekkoScience vs bitshopperde                   
 [2017-11-07 09:38:32.562] USB free BSE                   
 [2017-11-07 09:38:32.562] USB init, kernel attached ... - GSC device 3:17                   
 [2017-11-07 09:38:32.563] USB init, kernel detached ifinfo 0 interface 0 successfully - GSC device 3:17                   
 [2017-11-07 09:38:32.564] USB init, iProduct mismatch - GSC device 3:17                   
 [2017-11-07 09:38:32.564] Found 2Pac BM1384 Bitcoin Miner vs Compac BM1384 Bitcoin Miner                   
 [2017-11-07 09:38:32.564] USB free GSC                   
 [2017-11-07 09:38:32.564] USB init, kernel attached ... - GSD device 3:17                   
 [2017-11-07 09:38:32.564] USB init, kernel detached ifinfo 0 interface 0 successfully - GSD device 3:17                   
 [2017-11-07 09:38:32.567] USB init - GSD device 3:17 usbver=0110 prod='2Pac BM1384 Bitcoin Miner' manuf='GekkoScience' serial='GS-10015422'                   
 [2017-11-07 09:38:32.568] GSD 0: Found at 3:17                   
 [2017-11-07 09:38:32.572] GSD 0 TX: 84 00 00 11                   
 [2017-11-07 09:38:32.574] USB: GSD0 read1 buffering 5 extra bytes                   
 [2017-11-07 09:38:32.574] GSD 0 RX: 13 82 90 00 1e                   
 [2017-11-07 09:38:32.574] GSD 0 RX: 13 82 90 80 01                   
 [2017-11-07 09:38:32.677] GSD0: GetResults (amt=0 err=-7 ern=11)                   
 [2017-11-07 09:38:32.677] GSD 0 RX bytes(0):                     
 [2017-11-07 09:38:32.677] GSX looking for BSC 10c4:ea60 but found 2109:2812 instead                   
 [2017-11-07 09:38:32.677] GSX looking for BSD 10c4:ea60 but found 2109:2812 instead                   
 [2017-11-07 09:38:32.677] GSX looking for BSE 10c4:ea60 but found 2109:2812 instead                   
 [2017-11-07 09:38:32.677] GSX looking for GSC 10c4:ea60 but found 2109:2812 instead                   
 [2017-11-07 09:38:32.677] GSX looking for GSD 10c4:ea60 but found 2109:2812 instead                   
 [2017-11-07 09:38:32.677] GSX looking for GSE 10c4:ea60 but found 2109:2812 instead                   
 [2017-11-07 09:38:32.677] GSX looking for BSC 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.677] GSX looking for BSD 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.677] GSX looking for BSE 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.677] GSX looking for GSC 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.677] GSX looking for GSD 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.677] GSX looking for GSE 10c4:ea60 but found 1d6b:0002 instead                   
 [2017-11-07 09:38:32.677] Pushing sem post to thread 0                   
 [2017-11-07 09:38:32.677] Probing for an alive pool                   
 [2017-11-07 09:38:32.678] GSD 0 TX: 84 00 00 11                   
 [2017-11-07 09:38:32.678] Testing pool stratum+tcp://solo.ckpool.org:3333                   
 [2017-11-07 09:38:32.679] USB: GSD0 read1 buffering 5 extra bytes                   
 [2017-11-07 09:38:32.679] GSD 0 RX: 13 82 90 00 1e                   
 [2017-11-07 09:38:32.679] GSD 0 RX: 13 82 90 80 01                   
 [2017-11-07 09:38:32.782] GSD0: GetResults (amt=0 err=-7 ern=0)                   
 [2017-11-07 09:38:32.782] GSD 0 RX bytes(0):                     
 [2017-11-07 09:38:32.782] Found 2 chip(s) on GSD 0                   
 [2017-11-07 09:38:32.782] GSD 0: set frequency: 100.00 [07 83]                   
 [2017-11-07 09:38:32.782] GSD 0: Ticket mask set to 1                   
 [2017-11-07 09:38:32.782] GSD 0 TX: 82 07 83 1c                   
 [2017-11-07 09:38:32.782] GSD 0: sending chain inactive for 2 chips                   
 [2017-11-07 09:38:32.784] GSD 0 TX: 85 00 00 0f                   
 [2017-11-07 09:38:32.785] GSD 0 TX: 01 00 00 19                   
 [2017-11-07 09:38:32.786] GSD 0 TX: 01 80 00 16                   
 [2017-11-07 09:38:32.786] Waiting on sem in miner thread                   
 [2017-11-07 09:38:32.786] Popping work from get queue to get work                   
 [2017-11-07 09:38:32.847] Succeeded delayed connect                   
 [2017-11-07 09:38:42.786] Waiting for work to be available from pools.                   
 [2017-11-07 09:39:32.684] No servers were found that could be used to get work from.                   
 [2017-11-07 09:39:32.684] Please check the details from the list below of the servers you have input                   
 [2017-11-07 09:39:32.684] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers                   
 [2017-11-07 09:39:32.684] Pool: 0  URL: stratum+tcp://solo.ckpool.org:3333  User: 3E2m8V8dQvSQDJMHQD5dcCHM5AhYQDP6ti.0  Password: x                   
 [2017-11-07 09:39:32.684] No servers could be used! Exiting.   

wavelengthsf
Full Member
***
Offline Offline

Activity: 406
Merit: 110


View Profile
November 07, 2017, 03:10:26 PM
 #995

cgminer -o stratum+tcp://solo.ckpool.org:3333 -u 3E2m8V8dQvSQDJMHQD5dcCHM5AhYQDP6ti.0 -p x -D -P --verbose
...
 [2017-11-07 09:39:32.684] Pool: 0  URL: stratum+tcp://solo.ckpool.org:3333  User: 3E2m8V8dQvSQDJMHQD5dcCHM5AhYQDP6ti.0  Password: x                   
 [2017-11-07 09:39:32.684] No servers could be used! Exiting.   



Try running it without -D and -P

It is reporting it can't find the pool though - you're sure the device is on the internet?
sidehack
Legendary
*
Offline Offline

Activity: 1876
Merit: 1258

Curmudgeonly hardware guy


View Profile
November 07, 2017, 03:11:51 PM
 #996

Try a different pool. If you were attempting connection requests with an invalid address to ckpool he probably banned your IP.

Got a new 28-135GH stick miner!
Currently in development - 100+GH USB stick; 800GH 60W pod; 6TH volt-adjustable S1/3/5 upgrade kit
Server PSU interface boards and cables. USB and small-scale miners. Hardware hosting, advice and odd-jobs. Supporting the home miner community since 2013 - http://www.gekkoscience.com
btman123
Newbie
*
Offline Offline

Activity: 13
Merit: 0


View Profile
November 07, 2017, 03:56:51 PM
 #997

cgminer -o stratum+tcp://solo.ckpool.org:3333 -u 3E2m8V8dQvSQDJMHQD5dcCHM5AhYQDP6ti.0 -p x -D -P --verbose
...
 [2017-11-07 09:39:32.684] Pool: 0  URL: stratum+tcp://solo.ckpool.org:3333  User: 3E2m8V8dQvSQDJMHQD5dcCHM5AhYQDP6ti.0  Password: x                   
 [2017-11-07 09:39:32.684] No servers could be used! Exiting.   



Try running it without -D and -P

It is reporting it can't find the pool though - you're sure the device is on the internet?


Another run

cgminer -o stratum+tcp://solo.ckpool.org:3333 -u 3E2m8V8dQvSQDJMHQD5dcCHM5AhYQDP6ti.0 -p x
 [2017-11-07 10:46:53.039] Started cgminer 4.10.0                   
 [2017-11-07 10:46:53.557] Probing for an alive pool                   
 [2017-11-07 10:46:53.662] Found 2 chip(s) on GSD 0                   
 [2017-11-07 10:47:03.666] Waiting for work to be available from pools.                   
 [2017-11-07 10:47:53.564] No servers were found that could be used to get work from.                   
 [2017-11-07 10:47:53.564] Please check the details from the list below of the servers you have input                   
 [2017-11-07 10:47:53.564] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers                   
 [2017-11-07 10:47:53.564] Pool: 0  URL: stratum+tcp://solo.ckpool.org:3333  User: 3E2m8V8dQvSQDJMHQD5dcCHM5AhYQDP6ti.0  Password: x                   
 [2017-11-07 10:47:53.564] No servers could be used! Exiting. 


Telnet indicates that I can connect

telnet solo.ckpool.org 3333
Trying 45.59.68.74...
Connected to solo.ckpool.org.
Escape character is '^]'.
^]



btman123
Newbie
*
Offline Offline

Activity: 13
Merit: 0


View Profile
November 07, 2017, 04:11:32 PM
 #998

Try a different pool. If you were attempting connection requests with an invalid address to ckpool he probably banned your IP.


tried with slushpool

cgminer -o stratum+tcp://us-east.stratum.slushpool.com:3333 -u btman123.worker1 -p x
 [2017-11-07 10:51:26.203] Started cgminer 4.10.0                   
 [2017-11-07 10:51:26.723] Probing for an alive pool                   
 [2017-11-07 10:51:26.827] Found 2 chip(s) on GSD 0                   
 [2017-11-07 10:51:36.830] Waiting for work to be available from pools.                   
 [2017-11-07 10:52:26.729] No servers were found that could be used to get work from.                   
 [2017-11-07 10:52:26.729] Please check the details from the list below of the servers you have input                   
 [2017-11-07 10:52:26.729] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers                   
 [2017-11-07 10:52:26.729] Pool: 0  URL: stratum+tcp://us-east.stratum.slushpool.com:3333  User: btman123.worker1  Password: x                   
 [2017-11-07 10:52:26.729] No servers could be used! Exiting.
sidehack
Legendary
*
Offline Offline

Activity: 1876
Merit: 1258

Curmudgeonly hardware guy


View Profile
November 07, 2017, 04:21:45 PM
 #999

Do you know that port 3333 is open? Have you noticed that most pools have a port 80 option, among others, to test out if you can't connect on port 3333?

I think it's safe to say the USB stick is not the cause of your network issues, so you might consider checking for this kind of problem in the cgminer thread. I'm sure they've been asked and answered a hundred times in the half-dozen years the software's been in use.

Got a new 28-135GH stick miner!
Currently in development - 100+GH USB stick; 800GH 60W pod; 6TH volt-adjustable S1/3/5 upgrade kit
Server PSU interface boards and cables. USB and small-scale miners. Hardware hosting, advice and odd-jobs. Supporting the home miner community since 2013 - http://www.gekkoscience.com
btman123
Newbie
*
Offline Offline

Activity: 13
Merit: 0


View Profile
November 07, 2017, 04:42:34 PM
 #1000

Do you know that port 3333 is open? Have you noticed that most pools have a port 80 option, among others, to test out if you can't connect on port 3333?

I think it's safe to say the USB stick is not the cause of your network issues, so you might consider checking for this kind of problem in the cgminer thread. I'm sure they've been asked and answered a hundred times in the half-dozen years the software's been in use.

Thanks. I did post same question on cgminer thread. Agree that it does not appear to be a problem with a stick. Network is open.
I was able to use telnet to connect to port 3333 on solo.ckpool.org
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 [50] 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ... 105 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!