[1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool

[smoothrunnings]

I am seeing huge swings in the predicted payout, which is normally spot on when a payout occurs because I verify it when I look at when I get paid.

My 100GH miner has fallen to .001 while my 180GH/s of miners is .008 to .010 which doesn't make sense for the 100GH/s miner.

I see the global pool is now 485GH/s.

It depends on when the last share was found by your 100GH miner.  Expected payout will indeed swing around wildly as hash rates increase/decrease, share difficulties increase/decrease, shares drop off the payout list, etc.

To see what I mean visit p2pool.smoothrunnings.ca:9332

[jonnybravo0311]

I am seeing huge swings in the predicted payout, which is normally spot on when a payout occurs because I verify it when I look at when I get paid.

My 100GH miner has fallen to .001 while my 180GH/s of miners is .008 to .010 which doesn't make sense for the 100GH/s miner.

I see the global pool is now 485GH/s.

It depends on when the last share was found by your 100GH miner.  Expected payout will indeed swing around wildly as hash rates increase/decrease, share difficulties increase/decrease, shares drop off the payout list, etc.

To see what I mean visit p2pool.smoothrunnings.ca:9332

I went to your node and see nothing wrong with the reported numbers.  The payouts to each miner are determined by how many shares that miner has submitted in the given timeframe, and the weights associated to those submitted shares.  As an example, I have 2 S1s running on my local node.  Currently, my expected payouts show one with 0.02 and the other with 0.007.  Both have been running for exactly the same time, but one has found more shares than the other.

[IYFTech]

I merge mine Namecoin on UNO and BTC. That's it so far. Haven't tried United Scrypt, Huntercoin, etc.

Roy, I didn't realize it was possible to merge mine UNO - are you using the standard p2pool software?

Thanks 

[roy7]

Roy, I didn't realize it was possible to merge mine UNO - are you using the standard p2pool software?

Thanks 

UNO is the primary coin, not the merged coin. I run UNO and BTC nodes.

[Meuh6879]

p2pool doesn't really know what the hash rate is.  It just does an estimate based on how many shares are being found per time period. 

but, with "hour" graph. ... the progression is not chaotic.


http://imageshack.com/a/img836/992/6d5f.jpg

[PublicP2poolNode]

Lovin days where we have 3 blocks in the last 24 hour window like today

Hoping people who have never given p2pool a try will do so now, while the expected block times are sooner than expired shares. I don't love it when earned shares are wasted, that's when I feel like throwing in the towel.

Then we have days like today that help remind me why I like it here, other than the principles behind it which keep me with p2pool in the bad times as well.

[SpainCoinDev]

New: NewYorkCoin p2pool (this coin is going to relaunch soon!):
https://github.com/NewYorkCoin/p2pool-nyc

[smoothrunnings]

Lovin days where we have 3 blocks in the last 24 hour window like today

Hoping people who have never given p2pool a try will do so now, while the expected block times are sooner than expired shares. I don't love it when earned shares are wasted, that's when I feel like throwing in the towel.

Then we have days like today that help remind me why I like it here, other than the principles behind it which keep me with p2pool in the bad times as well.

This is one thing I have noticed with P2Pool which leads me to suspect there is a bug in it. Sometimes if I stop my P2Pool to do some maintenance on OpenSUSE and start it up later I noticed that I am lucky to get 10 shares a days, were as if I start and stop it randomly afterwards eventually it starts doing 10 shares day like it's doing right now; this is why it leads me to believe there is some kind of bug in the core of P2Pool because technically this shouldn't happen period.

[smoothrunnings]

New: NewYorkCoin p2pool (this coin is going to relaunch soon!):
https://github.com/NewYorkCoin/p2pool-nyc

NewYorkCoin? Does it have any value? Is it a scrypt or asic based currency?

[CartmanSPC]

I am seeing huge swings in the predicted payout, which is normally spot on when a payout occurs because I verify it when I look at when I get paid.

My 100GH miner has fallen to .001 while my 180GH/s of miners is .008 to .010 which doesn't make sense for the 100GH/s miner.

I see the global pool is now 485GH/s.

It depends on when the last share was found by your 100GH miner.  Expected payout will indeed swing around wildly as hash rates increase/decrease, share difficulties increase/decrease, shares drop off the payout list, etc.

To see what I mean visit p2pool.smoothrunnings.ca:9332

I went to your node and see nothing wrong with the reported numbers.  The payouts to each miner are determined by how many shares that miner has submitted in the given timeframe, and the weights associated to those submitted shares.  As an example, I have 2 S1s running on my local node.  Currently, my expected payouts show one with 0.02 and the other with 0.007.  Both have been running for exactly the same time, but one has found more shares than the other.

Why would you not run both S1's with the same payout address? That way their not competing with each other for shares on your node. I know in the long run it doesn't matter but still...

...or even just run each one with a non payout username so that all the shares go to your nodes payout address if you want to track the performance of each one separate.

[serje]

what is the port to mine on http://p2pool.info/


thanks

[bitpop]

what is the port to mine on http://p2pool.info/


thanks

9332

80 May also work

[serje]

what is the port to mine on http://p2pool.info/


thanks

9332

80 May also work

with 9332

Code:

 [2014-05-01 12:02:17] Pool: 0  URL: http://p2pool.info/:9332  User: 19C7ocZsUu7
SWtFc2zDTh5CAze88b6i73W  Password:
 [2014-05-01 12:02:17] Press any key to exit, or BFGMiner will try again in 15s.

 [2014-05-01 12:02:35] Pool 0 slow/down or URL or credentials invalid
 [2014-05-01 12:02:36] No servers were found that could be used to get work from
.
 [2014-05-01 12:02:36] Please check the details from the list below of the serve
rs you have input
 [2014-05-01 12:02:36] Most likely you have input the wrong URL, forgotten to ad
d a port, or have not set up workers
 [2014-05-01 12:02:36] Pool: 0  URL: http://p2pool.info/:9332  User: 19C7ocZsUu7
SWtFc2zDTh5CAze88b6i73W  Password:
 [2014-05-01 12:02:36] Press any key to exit, or BFGMiner will try again in 15s.

and with 80

Code:

 [2014-05-01 12:06:40] Pool: 0  URL: http://p2pool.info/:80  User: 19C7ocZsUu7SW
tFc2zDTh5CAze88b6i73W  Password:
 [2014-05-01 12:06:40] Press any key to exit, or BFGMiner will try again in 15s.

 [2014-05-01 12:06:57] Pool 0 slow/down or URL or credentials invalid
 [2014-05-01 12:06:58] No servers were found that could be used to get work from
.
 [2014-05-01 12:06:58] Please check the details from the list below of the serve
rs you have input
 [2014-05-01 12:06:58] Most likely you have input the wrong URL, forgotten to ad
d a port, or have not set up workers
 [2014-05-01 12:06:58] Pool: 0  URL: http://p2pool.info/:80  User: 19C7ocZsUu7SW
tFc2zDTh5CAze88b6i73W  Password:
 [2014-05-01 12:06:58] Press any key to exit, or BFGMiner will try again in 15s.

so if anyone has any more ideas let me know

[bitpop]

Blank password? Have you tried just putting password

Stop you need stratum, remove http and the slashes

  {
      "url" : "stratum+tcp://p2pool.info:9332",
      "user" : "address",
      "pass" : "pass"
   }

[serje]

Blank password? Have you tried just putting password

Stop you need stratum, remove http and the slashes

  {
      "url" : "stratum+tcp://p2pool.info:9332",
      "user" : "address",
      "pass" : "pass"
   }

still not working .... even tryed with bitpop as password

I want to help a friend set up his miners on a p2pool

and I've decided I want to use this one  http://p2pool.info/

but i can't find the port for it and it's not working with 9332

I managed to make bfgminer work with this p2pool http://p2pool.org:9332/static/ but I want to use the first one


can anyone tell me what port number should I use to mine there?

this is my original post from technical support

[smoothrunnings]

Blank password? Have you tried just putting password

Stop you need stratum, remove http and the slashes

  {
      "url" : "stratum+tcp://p2pool.info:9332",
      "user" : "address",
      "pass" : "pass"
   }

still not working .... even tryed with bitpop as password

I want to help a friend set up his miners on a p2pool

and I've decided I want to use this one  http://p2pool.info/

but i can't find the port for it and it's not working with 9332

I managed to make bfgminer work with this p2pool http://p2pool.org:9332/static/ but I want to use the first one


can anyone tell me what port number should I use to mine there?

this is my original post from technical support

BFGMiner works for me, I would check to make sure your firewall isn't blocking the outbound ports.

[serje]

Blank password? Have you tried just putting password

Stop you need stratum, remove http and the slashes

  {
      "url" : "stratum+tcp://p2pool.info:9332",
      "user" : "address",
      "pass" : "pass"
   }

still not working .... even tryed with bitpop as password

I want to help a friend set up his miners on a p2pool

and I've decided I want to use this one  http://p2pool.info/

but i can't find the port for it and it's not working with 9332

I managed to make bfgminer work with this p2pool http://p2pool.org:9332/static/ but I want to use the first one


can anyone tell me what port number should I use to mine there?

this is my original post from technical support

BFGMiner works for me, I would check to make sure your firewall isn't blocking the outbound ports.

I managed to make bfgminer work with this p2pool http://p2pool.org:9332/static/ but I want to use the first one

as you can see on .org it's working for me too but on .info it's NOT!!!

I want to mine on .info!

[Meuh6879]

why do you want on proprietary server ?!?
p2pool is the ability to mine with your server...

if you don't want ... use this thread : https://bitcointalk.org/index.php?topic=66182.0

[bitpop]

Just find another local one
They're all connected

http://bitnode.io

[PublicP2poolNode]

I don't think you can, I think p2pool.info is just that, info

http://p2pool.hostv.pl/