jonnybravo0311
Legendary
Offline
Activity: 1344
Merit: 1024
Mine at Jonny's Pool
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 12:31:43 PM |
|
also further to this current talk in here lol the /0 command sets to the bear min of the share diff on the miner as per the node diff so if the diff is 5mil for example it set the diff to 5mil if it 7mil it sets to 7mil....
But on saying this that /0 command can be used to set a diff higher than the min diff only for example if the diff was 5mil you can set ya rig to a diff via the / number command to say 7.5 mil eg /7500000 if this set under the current share diff on the nodes it defaults to the min diff on the node eg if you set it for 2.5 mil for example and the current diff was 5mil for a share it would default to the min diff of 5mil as that 2.5mil setting is below the current diff of 5mil
Show me the proof in the code that it does so. I have linked multiple places in the code that completely contradict this statement. All I've gotten back so far is, "based on my personal experience" and other anecdotal evidence. As is the saying, "Show me the money!" Someone show me where setting the address to /0 sets share difficulty to p2pool minimum share difficulty by quoting the actual CODE from p2pool (and not some modified version of the code like the vardiff patch or some scrypt coin) from forrestv github. As I wrote a number of times a few pages back, manually setting the share difficulty only makes sense if you're mining on a node where there is a very large discrepancy between your hash rate and the total hash rate of the node. For example, if you were to bring a 180GH/s miner to a node with 10TH/s, set that S1s difficulty manually. The same holds true going the other way. If you're bringing 10TH/s to a node with 1TH/s, set your share difficulty HIGHER than the default p2pool share value. I even provided a way for you to calculate what you should set it to to get an average of 1 share an hour. Regarding your comments on the minimum requirements to join p2pool, you've hit it pretty much dead on accurate. If you want to ensure you've got a good chance of having a share on the chain for every block found, that means you're going to need enough hardware to find a share every 12 hours or so. Currently the share difficulty is 6.5M. So, to find 2 shares a day, you'd need just about 650GH/s. Your statement about the hardware to bring to the party is incorrect, though. It's not like a dragon or an S2 is somehow better at finding shares than an S1 is. Hash rate is hash rate, no matter how you get there.
|
Jonny's Pool - Mine with us and help us grow! Support a pool that supports Bitcoin, not a hardware manufacturer's pockets! No SPV cheats. No empty blocks.
|
|
|
bryonp
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 85
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 12:39:41 PM |
|
How's that saying go, damn if you do; damned if you don't. It appears that the larger p2pool gets the worse it is for smaller miners....quite the dilemma since it needs to keep getting bigger to stay relevant.
It would be great if someone could take p2pool over and make it perform better and address the issues. I would move Multipool's ~250TH back to BTC p2pool in a heartbeat if it could handle the load. What do you mean by handle the load? It's at 1.81PH/s right now, share difficulty is at 6.5 million. If you've got hardware that works with p2pool, this is as good as it gets right now. M I think what flound getting at here is the diff issue as that hash rate goes up the diff will also keep rising and knocking more and more rigs off the face the earth of hitting shares unless ya running mining farms..... Think of it in terms of the BTC diff the more hash added the faster the blocks are found the higher the diff rises.... The same issue applies here to P2POOL as that hash rate keeps rising that share diff will keep going up as the find times will be faster.... What someone needs to do somewhere down the line is change the amount of shares from what is is 3000 odd per block to a larger number eg 12000 odd per block to match the rise in the hash rate on the network to bring it back down diff wise on the shares to gave the smaller miner a chance of hitting the shares as they once were able to do when the hash rate was low..... And in flound case been multipool they would have a mix of rigs in that 250 ths from small to large and if the s1 and s3 can not hit shares now and they make up alot of the network harsh rate on the btc what it going to be like in a pool double the hash it is today. eg 3.6 ph that would mean a diff off 13 mill + This is running 16 s-1's Version: unknown 7032706f6f6c2d6e2d6d6173746572 Pool rate: 1.67PH/s (13% DOA+orphan) Share difficulty: 6520000 Node uptime: 2.8 days Peers: 6 out, 0 in Local rate: 3.99TH/s (6.6% DOA) Expected time to share: 2.0 hours Shares: 44 total (4 orphaned, 0 dead) Efficiency: 104.5% Payout if a block were found NOW: 0.0698682 BTC to xxxxxxxxxxxxxxxxxxxxxxxxxxx. Expected after mining for 24 hours: 0.0691 BTC per block. Current block value: 25.084773600000002 BTC Expected time to block: 14.1 hours _______________________________________________________________________________ __________________________ Any opinions? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) I think I am finding a good amount of shares, its just that the blocks are not paying enough. If we had a few more blocks it would be better? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ? But we really are not. 1 month ago my payouts were 0.14xxxxxxx
|
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 12:44:22 PM |
|
Any opinions? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) I think I am finding a good amount of shares, its just that the blocks are not paying enough. If we had a few more blocks it would be better? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ? But we really are not. 1 month ago my payouts were 0.14xxxxxxx As more hashpower is added to the pool, payouts amounts will decrease in size, but payout frequency will increase. It should balance out. Also keep in mind overall Bitcoin difficulty keeps increasing, although not quite as much per jump as it used to. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
kgb2mining
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 112
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 12:47:19 PM |
|
This is running 16 s-1's Version: unknown 7032706f6f6c2d6e2d6d6173746572 Pool rate: 1.67PH/s (13% DOA+orphan) Share difficulty: 6520000 Node uptime: 2.8 days Peers: 6 out, 0 in Local rate: 3.99TH/s (6.6% DOA) Expected time to share: 2.0 hours Shares: 44 total (4 orphaned, 0 dead) Efficiency: 104.5% Payout if a block were found NOW: 0.0698682 BTC to xxxxxxxxxxxxxxxxxxxxxxxxxxx. Expected after mining for 24 hours: 0.0691 BTC per block. Current block value: 25.084773600000002 BTC Expected time to block: 14.1 hours _______________________________________________________________________________ __________________________ Any opinions? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) I think I am finding a good amount of shares, its just that the blocks are not paying enough. If we had a few more blocks it would be better? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ? But we really are not. 1 month ago my payouts were 0.14xxxxxxx I'd say you're right on target, although your DOA rate seems a little high: Version: 13.4-40-gce9e5a2 Pool rate: 1.67PH/s (13% DOA+orphan) Share difficulty: 6320000 Node uptime: 1.5 days Peers: 6 out, 0 in Local rate: 8.65TH/s (2.7% DOA) Expected time to share: 52.3 minutes Shares: 50 total (4 orphaned, 2 dead) Efficiency: 101.2% Payout if a block were found NOW: 0 BTC to . Expected after mining for 24 hours: 0.130 BTC per block. Current block value: 25.15205561 BTC Expected time to block: 14.1 hours I'm a little over double your hashrate, and double your payout, it adds up. And yes, a month ago my payout rate was higher (.18/day on BTCGuild), due to 2 things - first the pool rate was under 1PH/s with 100 less miners, and we've had at least 2 diff increases since then (last one happened overnight). Unfortunately the pool rate has grown enough to down our earnings due to more total hashrate but we've been unlucky in not seeing enough of an increase in blocks yet to offset it. However I believe the numbers are properly in-line for what has happened.
|
|
|
|
fire000
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 12:47:38 PM |
|
also further to this current talk in here lol the /0 command sets to the bear min of the share diff on the miner as per the node diff so if the diff is 5mil for example it set the diff to 5mil if it 7mil it sets to 7mil....
But on saying this that /0 command can be used to set a diff higher than the min diff only for example if the diff was 5mil you can set ya rig to a diff via the / number command to say 7.5 mil eg /7500000 if this set under the current share diff on the nodes it defaults to the min diff on the node eg if you set it for 2.5 mil for example and the current diff was 5mil for a share it would default to the min diff of 5mil as that 2.5mil setting is below the current diff of 5mil
Show me the proof in the code that it does so. I have linked multiple places in the code that completely contradict this statement. All I've gotten back so far is, "based on my personal experience" and other anecdotal evidence. As is the saying, "Show me the money!" Someone show me where setting the address to /0 sets share difficulty to p2pool minimum share difficulty by quoting the actual CODE from p2pool (and not some modified version of the code like the vardiff patch or some scrypt coin) from forrestv github. As I wrote a number of times a few pages back, manually setting the share difficulty only makes sense if you're mining on a node where there is a very large discrepancy between your hash rate and the total hash rate of the node. For example, if you were to bring a 180GH/s miner to a node with 10TH/s, set that S1s difficulty manually. The same holds true going the other way. If you're bringing 10TH/s to a node with 1TH/s, set your share difficulty HIGHER than the default p2pool share value. I even provided a way for you to calculate what you should set it to to get an average of 1 share an hour. Regarding your comments on the minimum requirements to join p2pool, you've hit it pretty much dead on accurate. If you want to ensure you've got a good chance of having a share on the chain for every block found, that means you're going to need enough hardware to find a share every 12 hours or so. Currently the share difficulty is 6.5M. So, to find 2 shares a day, you'd need just about 650GH/s. Your statement about the hardware to bring to the party is incorrect, though. It's not like a dragon or an S2 is somehow better at finding shares than an S1 is. Hash rate is hash rate, no matter how you get there. Dude that easy to see 1st hand lol that /0 is a manual diff setting override try this and watch what happens on ya miner diff.... 1st set to 7500000 watch ya miner diff rise above the node diff and set at 7.5mil.... Then set any number under the current node diff eg 4mil it will default to the min node diff as it will NOT allow you to set a diff under the current min diff of the node share rate so basically a 0 setting or a 4mil or 5 mil setting is going to gave a min diff or the node at 6.5 .....
|
|
|
|
kgb2mining
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 112
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 12:54:57 PM |
|
Unless you are running 1th rigs forgot p2pool as you will earn no where the amount you would on a normal pool... I don't necessarily agree with this statement, although I don't have empirical data to back it up. Hashrate is hashrate, it should even out in the end. Even if you don't get a share today in this block, your share will count for the next block and you would get a payout then. not 4-5 s1 ants or 2-3 s3's to get that 1th figure
This is patently false. I have 3 groups of 12 S1's running "together", meaning they are all using the same miner address, for a total of roughly 2.4TH/s per group. Each group of S1's is completely out-performing the group of 2 Terraminers I have with a slightly higher hashrate. I can show the graphs to prove it.
|
|
|
|
fire000
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 12:58:31 PM |
|
Unless you are running 1th rigs forgot p2pool as you will earn no where the amount you would on a normal pool... I don't necessarily agree with this statement, although I don't have empirical data to back it up. Hashrate is hashrate, it should even out in the end. Even if you don't get a share today in this block, your share will count for the next block and you would get a payout then. not 4-5 s1 ants or 2-3 s3's to get that 1th figure
This is patently false. I have 3 groups of 12 S1's running "together", meaning they are all using the same miner address, for a total of roughly 2.4TH/s per group. Each group of S1's is completely out-performing the group of 2 Terraminers I have with a slightly higher hashrate. I can show the graphs to prove it. hash rate they may be out doing the 2 terra's but earning wise what happening may pay to look at how many shares they are putting in ...... in theory on a s1 you should hit around 16mil diff 1 shares every 2 days on normal mining pools that is 2-3 shares p2 wise they are luck to hit 1 so off your example above 3 by 12 ants = 36 ant miners in total you should be seeing around 90 odd share every 2 days between them or there abouts to be on par with their diff 1 share rate and that the issue they are hitting no where near their diff 1 share rates......
|
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 01:06:36 PM |
|
Unless you are running 1th rigs forgot p2pool as you will earn no where the amount you would on a normal pool... I don't necessarily agree with this statement, although I don't have empirical data to back it up. Hashrate is hashrate, it should even out in the end. Even if you don't get a share today in this block, your share will count for the next block and you would get a payout then. This is regularly stated here, however it only holds true *if* bitcoin difficulty remains the same. Which it doesn't, so therefore it's false. If your luck averages out over the difficulty period, then yes, it will. However, the lower your hashrate, the less likely it is to average out over a fixed period of time (a given difficulty period). The higher the difficulty, the worse it gets. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
kgb2mining
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 112
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 01:46:02 PM |
|
hash rate they may be out doing the 2 terra's but earning wise what happening may pay to look at how many shares they are putting in ...... in theory on a s1 you should hit around 16mil diff 1 shares every 2 days on normal mining pools that is 2-3 shares p2 wise they are luck to hit 1 so off your example above 3 by 12 ants = 36 ant miners in total you should be seeing around 90 odd share every 2 days between them or there abouts to be on par with their diff 1 share rate and that the issue they are hitting no where near their diff 1 share rates......
The last 27 shares found on my node (out of 52 total for 1.5 day uptime): 8 shares - S1 group 1 5 shares - S1 group 2 5 shares - S1 group 3 9 shares - Terraminer group Very appropriately proportional. Roughly 7TH/s for the S1's, roughly 3TH/s for the Terraminers. 2:1 hash ratio, 2:1 share ratio.
|
|
|
|
KyrosKrane
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 01:47:59 PM |
|
Updated list to include FSC (fusioncoin):
To help other p2pool ops that may be interested in sharing their merged mining income, I have dedicated addresses you can send to that I'll then convert to BTC and feed back into the pool:
DVC: 1f56VqR9ajX3K42qSaDezvKXFmruSDg1B IXC: xaNQ54gxowcwHyxqGtFM4vwCfS84V6fmKF NMC: N1XhWNmvGhFL145zmQGQv7Vug6mThNh1iQ I0C: jMDtRnMAk2WxaoAw8HUceMaxPPqAuZ8AEN FSC: Fjhv8Sk8iC7AF76CTJbKo1zkHLUbTTTBs2
(I haven't given up on this yet... despite the fact that it doesn't seem be going anywhere.)
M
Are these still current and correct?
|
|
|
|
fire000
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 01:52:12 PM |
|
hash rate they may be out doing the 2 terra's but earning wise what happening may pay to look at how many shares they are putting in ...... in theory on a s1 you should hit around 16mil diff 1 shares every 2 days on normal mining pools that is 2-3 shares p2 wise they are luck to hit 1 so off your example above 3 by 12 ants = 36 ant miners in total you should be seeing around 90 odd share every 2 days between them or there abouts to be on par with their diff 1 share rate and that the issue they are hitting no where near their diff 1 share rates......
The last 27 shares found on my node (out of 52 total for 1.5 day uptime): 8 shares - S1 group 1 5 shares - S1 group 2 5 shares - S1 group 3 9 shares - Terraminer group Very appropriately proportional. Roughly 7.2TH/s for the S1's, roughly 3TH/s for the Terraminers. 2:1 hash ratio, 2:1 share ratio. dude look at them number close they are no where near what they should be for an s1 diff 1 share rate....... the 1st group has hit at less than a share each in 1.5 days and it get worst from there I rest my case 8 * 6.5 mil = 5200000 diff 1 share for that 1st group of 12 miners they should be around 32000000 diff 1 share at the end of day 2 they are about 26 mil shares down atm vs ya mining a normal pool...... diff 1 share wise so there a huge loss there atm vs mining at a normal pool
|
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 02:10:36 PM |
|
Updated list to include FSC (fusioncoin):
To help other p2pool ops that may be interested in sharing their merged mining income, I have dedicated addresses you can send to that I'll then convert to BTC and feed back into the pool:
DVC: 1f56VqR9ajX3K42qSaDezvKXFmruSDg1B IXC: xaNQ54gxowcwHyxqGtFM4vwCfS84V6fmKF NMC: N1XhWNmvGhFL145zmQGQv7Vug6mThNh1iQ I0C: jMDtRnMAk2WxaoAw8HUceMaxPPqAuZ8AEN FSC: Fjhv8Sk8iC7AF76CTJbKo1zkHLUbTTTBs2
(I haven't given up on this yet... despite the fact that it doesn't seem be going anywhere.)
M
Are these still current and correct? Yes. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
kgb2mining
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 112
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 02:10:53 PM |
|
dude look at them number close they are no where near what they should be for an s1 diff 1 share rate....... the 1st group has hit at less than a share each in 1.5 days and it get worst from there I rest my case
8 * 6.5 mil = 5200000 diff 1 share for that 1st group of 12 miners they should be around 32000000 diff 1 share at the end of day 2 they are about 26 mil shares down atm vs ya mining a normal pool...... diff 1 share wise so there a huge loss there atm vs mining at a normal pool
I don't understand your math. Current diff as reported by p2pool is 5.9mil, not 6.5mil, meaning 47 instead of 52. Yesterday the diff was lower, it increased overnight with the block adjustment. I don't understand where you're coming up with the 32mil after day 2. This sample size is 1.5 days total, not 2. I only counted the last 27 shares in my last post, not the full 54 over the past 1.5 days, but I'm going to assume it's equally proportional.
|
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 02:12:39 PM |
|
hash rate they may be out doing the 2 terra's but earning wise what happening may pay to look at how many shares they are putting in ...... in theory on a s1 you should hit around 16mil diff 1 shares every 2 days on normal mining pools that is 2-3 shares p2 wise they are luck to hit 1 so off your example above 3 by 12 ants = 36 ant miners in total you should be seeing around 90 odd share every 2 days between them or there abouts to be on par with their diff 1 share rate and that the issue they are hitting no where near their diff 1 share rates......
The last 27 shares found on my node (out of 52 total for 1.5 day uptime): 8 shares - S1 group 1 5 shares - S1 group 2 5 shares - S1 group 3 9 shares - Terraminer group Very appropriately proportional. Roughly 7.2TH/s for the S1's, roughly 3TH/s for the Terraminers. 2:1 hash ratio, 2:1 share ratio. dude look at them number close they are no where near what they should be for an s1 diff 1 share rate....... the 1st group has hit at less than a share each in 1.5 days and it get worst from there I rest my case 8 * 6.5 mil = 5200000 diff 1 share for that 1st group of 12 miners they should be around 32000000 diff 1 share at the end of day 2 they are about 26 mil shares down atm vs ya mining a normal pool...... diff 1 share wise so there a huge loss there atm vs mining at a normal pool You're comparing apples and oranges. A share in the p2pool alt chain is worth a *lot* more than a normal diff 1 share on a normal pool. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
jonnybravo0311
Legendary
Offline
Activity: 1344
Merit: 1024
Mine at Jonny's Pool
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 03:30:46 PM |
|
also further to this current talk in here lol the /0 command sets to the bear min of the share diff on the miner as per the node diff so if the diff is 5mil for example it set the diff to 5mil if it 7mil it sets to 7mil....
But on saying this that /0 command can be used to set a diff higher than the min diff only for example if the diff was 5mil you can set ya rig to a diff via the / number command to say 7.5 mil eg /7500000 if this set under the current share diff on the nodes it defaults to the min diff on the node eg if you set it for 2.5 mil for example and the current diff was 5mil for a share it would default to the min diff of 5mil as that 2.5mil setting is below the current diff of 5mil
Show me the proof in the code that it does so. I have linked multiple places in the code that completely contradict this statement. All I've gotten back so far is, "based on my personal experience" and other anecdotal evidence. As is the saying, "Show me the money!" Someone show me where setting the address to /0 sets share difficulty to p2pool minimum share difficulty by quoting the actual CODE from p2pool (and not some modified version of the code like the vardiff patch or some scrypt coin) from forrestv github. As I wrote a number of times a few pages back, manually setting the share difficulty only makes sense if you're mining on a node where there is a very large discrepancy between your hash rate and the total hash rate of the node. For example, if you were to bring a 180GH/s miner to a node with 10TH/s, set that S1s difficulty manually. The same holds true going the other way. If you're bringing 10TH/s to a node with 1TH/s, set your share difficulty HIGHER than the default p2pool share value. I even provided a way for you to calculate what you should set it to to get an average of 1 share an hour. Regarding your comments on the minimum requirements to join p2pool, you've hit it pretty much dead on accurate. If you want to ensure you've got a good chance of having a share on the chain for every block found, that means you're going to need enough hardware to find a share every 12 hours or so. Currently the share difficulty is 6.5M. So, to find 2 shares a day, you'd need just about 650GH/s. Your statement about the hardware to bring to the party is incorrect, though. It's not like a dragon or an S2 is somehow better at finding shares than an S1 is. Hash rate is hash rate, no matter how you get there. Dude that easy to see 1st hand lol that /0 is a manual diff setting override try this and watch what happens on ya miner diff.... 1st set to 7500000 watch ya miner diff rise above the node diff and set at 7.5mil.... Then set any number under the current node diff eg 4mil it will default to the min node diff as it will NOT allow you to set a diff under the current min diff of the node share rate so basically a 0 setting or a 4mil or 5 mil setting is going to gave a min diff or the node at 6.5 ..... Show me the code. Don't tell me, "dude that easy to see 1st hand lol...". Here's my proof. First, the reading of manually set difficulty: desired_pseudoshare_target = None desired_share_target = None for symbol, parameter in zip(contents2[::2], contents2[1::2]): if symbol == '+': try: desired_pseudoshare_target = bitcoin_data.difficulty_to_target(float(parameter)) except: if p2pool.DEBUG: log.err() elif symbol == '/': try: desired_share_target = bitcoin_data.difficulty_to_target(float(parameter)) except: if p2pool.DEBUG: log.err()
if random.uniform(0, 100) < self.worker_fee: pubkey_hash = self.my_pubkey_hash else: try: pubkey_hash = bitcoin_data.address_to_pubkey_hash(user, self.node.net.PARENT) except: # XXX blah pubkey_hash = self.my_pubkey_hash
return user, pubkey_hash, desired_share_target, desired_pseudoshare_target
Now, here's the difficulty_to_target definition: def difficulty_to_target(difficulty): assert difficulty >= 0 if difficulty == 0: return 2**256-1 return min(int((0xffff0000 * 2**(256-64) + 1)/difficulty - 1 + 0.5), 2**256-1)
This CLEARLY sets the difficulty to 2**256-1 if you set /0. Using python and printing what 2**256-1 resolves to: Python 2.7.8 (default, Jul 3 2014, 06:13:58) [GCC 4.2.1 Compatible Apple LLVM 5.1 (clang-503.0.40)] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> x=2**256-1 >>> print x 115792089237316195423570985008687907853269984665640564039457584007913129639935 >>> exit()
Now, here's where the comparison between YOUR set value and the value p2pool determines happens: if desired_share_target is None: desired_share_target = 2**256-1 local_hash_rate = self._estimate_local_hash_rate() if local_hash_rate is not None: desired_share_target = min(desired_share_target, bitcoin_data.average_attempts_to_target(local_hash_rate * self.node.net.SHARE_PERIOD / 0.0167)) # limit to 1.67% of pool shares by modulating share difficulty
local_addr_rates = self.get_local_addr_rates() lookbehind = 3600//self.node.net.SHARE_PERIOD block_subsidy = self.node.bitcoind_work.value['subsidy'] if previous_share is not None and self.node.tracker.get_height(previous_share.hash) > lookbehind: expected_payout_per_block = local_addr_rates.get(pubkey_hash, 0)/p2pool_data.get_pool_attempts_per_second(self.node.tracker, self.node.best_share_var.value, lookbehind) \ * block_subsidy*(1-self.donation_percentage/100) # XXX doesn't use global stale rate to compute pool hash if expected_payout_per_block < self.node.net.PARENT.DUST_THRESHOLD: desired_share_target = min(desired_share_target, bitcoin_data.average_attempts_to_target((bitcoin_data.target_to_average_attempts(self.node.bitcoind_work.value['bits'].target)*self.node.net.SPREAD)*self.node.net.PARENT.DUST_THRESHOLD/block_subsidy) )
This block is NEVER reached. Why? Because the value of "desired_share_target" at this point is not None. It is 2**256-1. Therefore, your desired target difficulty remains at 2**256-1 when you set it to "0" manually by using /0. Now that I've shown my proof why you're wrong, show me why you're right.
|
Jonny's Pool - Mine with us and help us grow! Support a pool that supports Bitcoin, not a hardware manufacturer's pockets! No SPV cheats. No empty blocks.
|
|
|
jonnybravo0311
Legendary
Offline
Activity: 1344
Merit: 1024
Mine at Jonny's Pool
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 03:43:14 PM |
|
Unless you are running 1th rigs forgot p2pool as you will earn no where the amount you would on a normal pool... I don't necessarily agree with this statement, although I don't have empirical data to back it up. Hashrate is hashrate, it should even out in the end. Even if you don't get a share today in this block, your share will count for the next block and you would get a payout then. This is regularly stated here, however it only holds true *if* bitcoin difficulty remains the same. Which it doesn't, so therefore it's false. If your luck averages out over the difficulty period, then yes, it will. However, the lower your hashrate, the less likely it is to average out over a fixed period of time (a given difficulty period). The higher the difficulty, the worse it gets. M While your statement about rising difficulty is true, the application of it here is not addressing the statement made by fire000. His statement implied a difference between using a dragon miner at 1TH/s vs using a combination of other miners to also achieve that 1TH/s. In this sense, hash rate is hash rate. If you have 500 Antminer U2s all hashing at 2GH/s each, or 5 over clocked S1s hashing at 200GH/s each, or 1 dragon hashing at 1TH/s, you still have 1TH/s mining. Your statement is entirely accurate about it not evening out in the end, precisely because of increased difficulty.
|
Jonny's Pool - Mine with us and help us grow! Support a pool that supports Bitcoin, not a hardware manufacturer's pockets! No SPV cheats. No empty blocks.
|
|
|
jonnybravo0311
Legendary
Offline
Activity: 1344
Merit: 1024
Mine at Jonny's Pool
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 04:31:40 PM |
|
Lmao how hard is it to understand that /0 is a manual override code for diff.... It can only be set above the current diff to have any effect eg if the current diff is say 6 mil a share it need to be set above this to see any effect on diff..... If it is set under this value of 6 mil it defaults to the current share diff ........ Weather you set it at 5 mil 4 mil 3.5 mil or 0 as the value is less than the min current diff in this case of 6 mil it not rocket science and the proof is ya only got to test it and take note of the diff your miner is set at to see it in effect 1st hand DO I HAVE TO SCREEN SHOT IT to highlight it too you that the / number if less than the current share diff it will default to the current min share diff of the node as ya do not know where to find the diff reading on ya miner ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ?? Ps does not need to look at code etc to know you can not set a diff under the current share diff if you do it will default to current share diff hence the comment above You have yet to provide proof of your statements. I have shown you where the code explicitly sets the difficulty to 2**256-1 if you set the difficulty to /0. Show me where it doesn't. I understand quite well that /0 or /100 or /10000000 is a manual override for share difficulty. What I want YOU to show to me is proof of your statement If it is set under this value of 6 mil it defaults to the current share diff.
Show me that. Not by screenshots. By the CODE. Your next statement: Weather you set it at 5 mil 4 mil 3.5 mil or 0 as the value is less than the min current diff in this case of 6 mil it not rocket science and the proof is ya only got to test it and take note of the diff your miner is set at to see it in effect 1st hand DO I HAVE TO SCREEN SHOT IT to highlight it too you that the / number if less than the current share diff it will default to the current min share diff of the node as ya do not know where to find the diff reading on ya miner ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ?? That's just outright incorrect. Your miner does NOT show the value you set in /0 or /100 or /100000. Your miner shows the PSEUDO share value you defined using +0 or +100 or +1000. Your miner has absolutely no concept of anything set with using /#.
|
Jonny's Pool - Mine with us and help us grow! Support a pool that supports Bitcoin, not a hardware manufacturer's pockets! No SPV cheats. No empty blocks.
|
|
|
contactlight
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 04:32:32 PM |
|
For some reason this new difficulty increase has been great for my luck. I have been finding blocks left and right.
|
|
|
|
fire000
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 04:45:46 PM Last edit: August 08, 2014, 04:55:50 PM by fire000 |
|
Lmao how hard is it to understand that /0 is a manual override code for diff.... It can only be set above the current diff to have any effect eg if the current diff is say 6 mil a share it need to be set above this to see any effect on diff..... If it is set under this value of 6 mil it defaults to the current share diff ........ Weather you set it at 5 mil 4 mil 3.5 mil or 0 as the value is less than the min current diff in this case of 6 mil it not rocket science and the proof is ya only got to test it and take note of the diff your miner is set at to see it in effect 1st hand DO I HAVE TO SCREEN SHOT IT to highlight it too you that the / number if less than the current share diff it will default to the current min share diff of the node as ya do not know where to find the diff reading on ya miner ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ?? Ps does not need to look at code etc to know you can not set a diff under the current share diff if you do it will default to current share diff hence the comment above You have yet to provide proof of your statements. I have shown you where the code explicitly sets the difficulty to 2**256-1 if you set the difficulty to /0. Show me where it doesn't. I understand quite well that /0 or /100 or /10000000 is a manual override for share difficulty. What I want YOU to show to me is proof of your statement If it is set under this value of 6 mil it defaults to the current share diff.
Show me that. Not by screenshots. By the CODE. Your next statement: Weather you set it at 5 mil 4 mil 3.5 mil or 0 as the value is less than the min current diff in this case of 6 mil it not rocket science and the proof is ya only got to test it and take note of the diff your miner is set at to see it in effect 1st hand DO I HAVE TO SCREEN SHOT IT to highlight it too you that the / number if less than the current share diff it will default to the current min share diff of the node as ya do not know where to find the diff reading on ya miner ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ?? That's just outright incorrect. Your miner does NOT show the value you set in /0 or /100 or /100000. Your miner shows the PSEUDO share value you defined using +0 or +100 or +1000. Your miner has absolutely no concept of anything set with using /#. I am not going to go digging through code when it common knowelge you can not put a share in that not above the share value and be credited for it as a paying share...... hence that statement above if your share is not over that current share diff you not going to be credited with it as a paying share are ya ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ?? So it defaults to the current share diff value not rocket science Ps next time ya quote something quote the full statement not part of it It can only be set above the current diff to have any effect eg if the current diff is say 6 mil a share it need to be set above this to see any effect on diff... If it is set under this value of 6 mil it defaults to the current share diff
|
|
|
|
jonnybravo0311
Legendary
Offline
Activity: 1344
Merit: 1024
Mine at Jonny's Pool
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 08, 2014, 05:14:54 PM |
|
Lmao how hard is it to understand that /0 is a manual override code for diff.... It can only be set above the current diff to have any effect eg if the current diff is say 6 mil a share it need to be set above this to see any effect on diff..... If it is set under this value of 6 mil it defaults to the current share diff ........ Weather you set it at 5 mil 4 mil 3.5 mil or 0 as the value is less than the min current diff in this case of 6 mil it not rocket science and the proof is ya only got to test it and take note of the diff your miner is set at to see it in effect 1st hand DO I HAVE TO SCREEN SHOT IT to highlight it too you that the / number if less than the current share diff it will default to the current min share diff of the node as ya do not know where to find the diff reading on ya miner ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ?? Ps does not need to look at code etc to know you can not set a diff under the current share diff if you do it will default to current share diff hence the comment above You have yet to provide proof of your statements. I have shown you where the code explicitly sets the difficulty to 2**256-1 if you set the difficulty to /0. Show me where it doesn't. I understand quite well that /0 or /100 or /10000000 is a manual override for share difficulty. What I want YOU to show to me is proof of your statement If it is set under this value of 6 mil it defaults to the current share diff.
Show me that. Not by screenshots. By the CODE. Your next statement: Weather you set it at 5 mil 4 mil 3.5 mil or 0 as the value is less than the min current diff in this case of 6 mil it not rocket science and the proof is ya only got to test it and take note of the diff your miner is set at to see it in effect 1st hand DO I HAVE TO SCREEN SHOT IT to highlight it too you that the / number if less than the current share diff it will default to the current min share diff of the node as ya do not know where to find the diff reading on ya miner ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ?? That's just outright incorrect. Your miner does NOT show the value you set in /0 or /100 or /100000. Your miner shows the PSEUDO share value you defined using +0 or +100 or +1000. Your miner has absolutely no concept of anything set with using /#. I am not going to go digging through code when it common knowelge you can not put a share in that not above the share value and be credited for it as a paying share...... hence that statement above if your share is not over that current share diff you not going to be credited with it as a paying share are ya ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ?? So it defaults to the current share diff value not rocket science Ps next time ya quote something quote the full statement not part of it It can only be set above the current diff to have any effect eg if the current diff is say 6 mil a share it need to be set above this to see any effect on diff... If it is set under this value of 6 mil it defaults to the current share diff You are obviously failing to understand. Your miner has no knowledge whatsoever of you setting a share difficulty of /0 or /256 or /245982345. None. Whatsoever. Your miner shows you the PSUEDO share value you have set using +0 or +256 or +1000. What I am stating is the following: If you set your share difficulty to /0, that then gets translated by the p2pool code to set your desired share target to be 2**256-1. If you set your share difficulty to ANY other value, p2pool will evaluate that value and attempt to add it to the share chain. It will not be added if your desired share target is LESS than the required difficulty to actually get on the chain in the first place. If you set your share difficulty to something LARGER than the p2pool minimum, when you find a share at least your target difficulty it WILL be added to the share chain (assuming it's not orphaned or DOA), and its payout value WILL be weighted appropriately. This is also proven in the code. I want you, or anybody, to prove to me that setting /0 somehow gets translated into p2pool minimum difficulty. That's what I'm looking for. Proof. The ACTUAL CODE that does this. I have shown the ACTUAL CODE that supports my theory. You have given nothing but incoherent blathering about how you're right and everybody knows it. Let me put it another way. I WANT to be proven wrong. I WANT to be shown where I'm incorrect. Do that. Prove me wrong.
|
Jonny's Pool - Mine with us and help us grow! Support a pool that supports Bitcoin, not a hardware manufacturer's pockets! No SPV cheats. No empty blocks.
|
|
|
|