ababadababa
Newbie
 Offline
Activity: 6
Merit: 0
|
 |
March 27, 2018, 11:29:47 AM |
|
[2018-03-27 04:21:10] Starting on stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581
[2018-03-27 04:21:10] NVML GPU monitoring enabled.
[2018-03-27 04:21:10] 8 miner threads started, using 'lyra2z' algorithm.
[2018-03-27 04:21:13] Stratum difficulty set to 5 (0.01953)
[2018-03-27 04:21:20] GPU #0: Intensity set to 17, 131072 cuda threads
[2018-03-27 04:21:20] GPU #2: Intensity set to 17, 131072 cuda threads
[2018-03-27 04:21:20] GPU #1: Intensity set to 17, 131072 cuda threads
[2018-03-27 04:21:20] GPU #5: Intensity set to 17, 131072 cuda threads
[2018-03-27 04:21:20] GPU #3: Intensity set to 17, 131072 cuda threads
[2018-03-27 04:21:20] GPU #4: Intensity set to 17, 131072 cuda threads
[2018-03-27 04:21:20] GPU #7: Intensity set to 17, 131072 cuda threads
[2018-03-27 04:21:20] GPU #1: MSI GTX 1080 Ti, 79.74 kH/s
[2018-03-27 04:21:20] GPU #0: MSI GTX 1080 Ti, 79.74 kH/s
[2018-03-27 04:21:20] GPU #6: Intensity set to 17, 131072 cuda threads
[2018-03-27 04:21:20] GPU #2: MSI GTX 1080, 78.89 kH/s
[2018-03-27 04:21:20] GPU #3: MSI GTX 1080, 76.36 kH/s
[2018-03-27 04:21:20] GPU #5: MSI GTX 1080, 76.31 kH/s
[2018-03-27 04:21:21] GPU #4: MSI GTX 1080, 71.80 kH/s
[2018-03-27 04:21:21] GPU #7: MSI GTX 1080, 71.76 kH/s
[2018-03-27 04:21:21] GPU #6: MSI GTX 1080 Ti, 69.34 kH/s
[2018-03-27 04:21:25] GPU #3: MSI GTX 1080, 2183.67 kH/s
[2018-03-27 04:21:37] GPU #4: MSI GTX 1080, 2198.53 kH/s
[2018-03-27 04:21:37] accepted: 1/1 (diff 0.033), 10.70 MH/s yes!
[2018-03-27 04:21:38] GPU #2: MSI GTX 1080, 2176.62 kH/s
[2018-03-27 04:21:45] GPU #4: MSI GTX 1080, 2195.73 kH/s
[2018-03-27 04:21:45] accepted: 2/2 (diff 0.033), 11.23 MH/s yes!
[2018-03-27 04:21:46] GPU #7: MSI GTX 1080, 2174.82 kH/s
[2018-03-27 04:21:46] accepted: 3/3 (diff 0.033), 11.59 MH/s yes!
[2018-03-27 04:21:56] GPU #0: MSI GTX 1080 Ti, 2923.20 kH/s
[2018-03-27 04:21:56] GPU #0: 2019 MHz 17.20 kH/W 113W 51C FAN 30%
[2018-03-27 04:21:57] accepted: 4/4 (diff 0.033), 12.30 MH/s yes!
[2018-03-27 04:21:58] GPU #6: MSI GTX 1080 Ti, 4806.30 kH/s
[2018-03-27 04:21:58] GPU #6: unspecified launch failure
[2018-03-27 04:21:58] GPU #1: MSI GTX 1080 Ti, 4754.69 kH/s
[2018-03-27 04:21:58] GPU #1: unspecified launch failure
[2018-03-27 04:21:58] GPU #2: MSI GTX 1080, 6329.96 kH/s
[2018-03-27 04:21:58] GPU #2: unspecified launch failure
[2018-03-27 04:21:58] GPU #6: unspecified launch failure
[2018-03-27 04:21:58] GPU #4: MSI GTX 1080, 10.13 MH/s
[2018-03-27 04:21:58] GPU #4: unspecified launch failure
[2018-03-27 04:21:58] GPU #1: unspecified launch failure
[2018-03-27 04:21:58] GPU #5: MSI GTX 1080, 3618.08 kH/s
[2018-03-27 04:21:58] GPU #5: unspecified launch failure
[2018-03-27 04:21:58] GPU #7: MSI GTX 1080, 11.08 MH/s
[2018-03-27 04:21:58] GPU #7: unspecified launch failure
[2018-03-27 04:21:58] GPU #3: MSI GTX 1080, 3992.41 kH/s
[2018-03-27 04:21:58] GPU #3: unspecified launch failure
[2018-03-27 04:21:58] GPU #0: unspecified launch failure
[2018-03-27 04:21:58] GPU #2: unspecified launch failure
[2018-03-27 04:21:58] GPU #6: unspecified launch failure
when i start mining ZCOIN its starts but after gets just \\unspecified launch failure\\, what do i need to do?
|
|
|
|
|
Chieftec
Newbie
Offline
Activity: 9
Merit: 0
|
|
March 27, 2018, 02:13:05 PM |
|
Hello!
My motherboard does not see ssd with nvoc installed, while with the usb flash I can become on ssd ubuntu,
is there any bash script that would update ubuntu to nvoc fork?
Thank you!
|
|
|
|
|
$ONOFCOIN
Newbie
Offline
Activity: 7
Merit: 0
|
|
March 27, 2018, 04:03:35 PM |
|
Does anyone know how I can dual mine Ethereum with verge(xvg). I am currently running nvoc 19.2
|
|
|
|
|
|
leenoox
|
|
March 27, 2018, 05:43:04 PM |
|
[2018-03-27 04:21:10] Starting on stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581
[2018-03-27 04:21:10] NVML GPU monitoring enabled.
[2018-03-27 04:21:10] 8 miner threads started, using 'lyra2z' algorithm.
[2018-03-27 04:21:13] Stratum difficulty set to 5 (0.01953)
[2018-03-27 04:21:20] GPU #0: Intensity set to 17, 131072 cuda threads
[2018-03-27 04:21:20] GPU #2: Intensity set to 17, 131072 cuda threads
[2018-03-27 04:21:20] GPU #1: Intensity set to 17, 131072 cuda threads
[2018-03-27 04:21:20] GPU #5: Intensity set to 17, 131072 cuda threads
[2018-03-27 04:21:20] GPU #3: Intensity set to 17, 131072 cuda threads
[2018-03-27 04:21:20] GPU #4: Intensity set to 17, 131072 cuda threads
[2018-03-27 04:21:20] GPU #7: Intensity set to 17, 131072 cuda threads
[2018-03-27 04:21:20] GPU #1: MSI GTX 1080 Ti, 79.74 kH/s
[2018-03-27 04:21:20] GPU #0: MSI GTX 1080 Ti, 79.74 kH/s
[2018-03-27 04:21:20] GPU #6: Intensity set to 17, 131072 cuda threads
[2018-03-27 04:21:20] GPU #2: MSI GTX 1080, 78.89 kH/s
[2018-03-27 04:21:20] GPU #3: MSI GTX 1080, 76.36 kH/s
[2018-03-27 04:21:20] GPU #5: MSI GTX 1080, 76.31 kH/s
[2018-03-27 04:21:21] GPU #4: MSI GTX 1080, 71.80 kH/s
[2018-03-27 04:21:21] GPU #7: MSI GTX 1080, 71.76 kH/s
[2018-03-27 04:21:21] GPU #6: MSI GTX 1080 Ti, 69.34 kH/s
[2018-03-27 04:21:25] GPU #3: MSI GTX 1080, 2183.67 kH/s
[2018-03-27 04:21:37] GPU #4: MSI GTX 1080, 2198.53 kH/s
[2018-03-27 04:21:37] accepted: 1/1 (diff 0.033), 10.70 MH/s yes!
[2018-03-27 04:21:38] GPU #2: MSI GTX 1080, 2176.62 kH/s
[2018-03-27 04:21:45] GPU #4: MSI GTX 1080, 2195.73 kH/s
[2018-03-27 04:21:45] accepted: 2/2 (diff 0.033), 11.23 MH/s yes!
[2018-03-27 04:21:46] GPU #7: MSI GTX 1080, 2174.82 kH/s
[2018-03-27 04:21:46] accepted: 3/3 (diff 0.033), 11.59 MH/s yes!
[2018-03-27 04:21:56] GPU #0: MSI GTX 1080 Ti, 2923.20 kH/s
[2018-03-27 04:21:56] GPU #0: 2019 MHz 17.20 kH/W 113W 51C FAN 30%
[2018-03-27 04:21:57] accepted: 4/4 (diff 0.033), 12.30 MH/s yes!
[2018-03-27 04:21:58] GPU #6: MSI GTX 1080 Ti, 4806.30 kH/s
[2018-03-27 04:21:58] GPU #6: unspecified launch failure
[2018-03-27 04:21:58] GPU #1: MSI GTX 1080 Ti, 4754.69 kH/s
[2018-03-27 04:21:58] GPU #1: unspecified launch failure
[2018-03-27 04:21:58] GPU #2: MSI GTX 1080, 6329.96 kH/s
[2018-03-27 04:21:58] GPU #2: unspecified launch failure
[2018-03-27 04:21:58] GPU #6: unspecified launch failure
[2018-03-27 04:21:58] GPU #4: MSI GTX 1080, 10.13 MH/s
[2018-03-27 04:21:58] GPU #4: unspecified launch failure
[2018-03-27 04:21:58] GPU #1: unspecified launch failure
[2018-03-27 04:21:58] GPU #5: MSI GTX 1080, 3618.08 kH/s
[2018-03-27 04:21:58] GPU #5: unspecified launch failure
[2018-03-27 04:21:58] GPU #7: MSI GTX 1080, 11.08 MH/s
[2018-03-27 04:21:58] GPU #7: unspecified launch failure
[2018-03-27 04:21:58] GPU #3: MSI GTX 1080, 3992.41 kH/s
[2018-03-27 04:21:58] GPU #3: unspecified launch failure
[2018-03-27 04:21:58] GPU #0: unspecified launch failure
[2018-03-27 04:21:58] GPU #2: unspecified launch failure
[2018-03-27 04:21:58] GPU #6: unspecified launch failure
when i start mining ZCOIN its starts but after gets just \\unspecified launch failure\\, what do i need to do? Try lowering OC settings, see if that helps. |
|
|
|
|
leenoox
|
|
March 27, 2018, 05:56:18 PM |
|
Hello!
My motherboard does not see ssd with nvoc installed, while with the usb flash I can become on ssd ubuntu,
is there any bash script that would update ubuntu to nvoc fork?
Thank you!
You have to untar (unzip) the image you downloaded. Depends on the program you use, you might need to unzip it twice (From *.tar.gz to *.tar, then run it again to unzip the *.tar to get *.img). Some programs can directly unzip the tar.gz in one step, some need two steps. Once you unzipped the downloaded file and got the *.img you can use hddrawcopy to burn the img to your SSD. Once the image is burned to your SSD, plug it to your PC, remove any other HDD, SSD or USB from your PC, enter BIOS, disable UEFI, enable legacy/CSM and save and restart. It should boot into nvoc. There is no script to update/turn Ubuntu into nvoc. There's more than just few scripts... nvidia drivers, cuda, miners, removed default packages, installed extra packages, custom OS tweaks... lots of manual tweaks, not easy to do with script. |
|
|
|
pandorum
Newbie
Offline
Activity: 2
Merit: 0
|
|
March 27, 2018, 10:18:37 PM |
|
Hi
I am using main BioStar H81S2, how can I boot nvOC from USB Stick. I tried to using it, but it not show from boot menu.
Disable UEFI, enable CSM or Legacy boot devices. Try different USB ports. If you still having trouble join the Discord chat, it's easier to troubleshoot through live chat (I think the link is in the third post on page 1 of this thread) Big thank you |
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
March 28, 2018, 10:02:01 AM |
|
Does anyone know how I can dual mine Ethereum with verge(xvg). I am currently running nvoc 19.2
There is a new dual mining introduced for 19-2.1 (Not released yet), you can try it in 1bash add this after all the other coins : ###################################################
# Claymore_Dual Mining #
# Set COIN="Claymore_Dual" #
###################################################
###You can use variables like this:
#DUAL_ECOIN="ETH"
#DUAL_EPOOL="$ETH_POOL"
#DUAL_EPORT="$ETH_PORT"
#DUAL_EWAL="$ETH_ADDRESS"
#DUAL_EPSW="$MINER_PWD"
#DUAL_EWORKER="$ETH_WORKER"
DUAL_ECOIN="MAIN COIN" #Main Coin, Ethereum or any Ethash Coin
DUAL_EPOOL="MAIN COIN POOL ADDREES" #Main Coin pool address, no need to add stratum+tcp://
DUAL_EPORT="MAIN COIN POOL PORT" #Main Coin Port Number
DUAL_EWAL="MAIN COIN WALLET ADDRESS" #Main Coin Wallet address or pool username
DUAL_EPSW="$MINER_PWD" #Main Coin worker password on pool
DUAL_EWORKER="$WORKER" #Main Coin Worker Name
DUAL_EWAL_FORMAT="." #Set your main pool wallet address format ".", "/", "-"
DUAL_DCOIN="DUAL COIN" #select second coin to mine in dual mode. Possible options are "dcr", "sc", "lbc", "pasc", "blake2s", "keccak". Default value is "dcr".
DUAL_DPOOL="DUAL COIN POOL ADDRESS" #2nd coin pool address
DUAL_DPORT="DUAL COIN POOL PORT" #2nd coin pool address
DUAL_DWAL="DUAL COIN WALLET ADDRESS" #2nd coin wallet address or worker name, it depends on pool.
DUAL_DPSW="$MINER_PWD" #Password for 2nd coin .
DUAL_DWORKER="$WORKER" #Worker name for 2nd coin
DUAL_DWAL_FORMAT="." #Set your dual pool wallet address format ".", "/", "-"
DCRI="40" #2nd coin intensity.
ALL_POOLS="1" #Specify "-allpools 1" if miner does not want to mine on specified pool (because it cannot mine devfee on that pool), but you agree to use some default pools for devfee mining.
MPORT="-3333" #remote monitoring/management port. Default value is -3333 (read-only mode), specify "-mport 0" to disable remote monitoring/management feature.
MPSW="" #remote monitoring/management password.
DUAL_ADDITIONAL_ARGUMENTS="" #add "-allcoins 1" if you mine Ethereum forks or other Ethash coins
in 0miner add : if [[ $COIN == CLAYMORE_DUAL ]]
then
HCD=/home/m1/eth/claymore/$CLAYMORE_VERSION/ethdcrminer64
E_ADDR="$DUAL_EWAL$DUAL_EWAL_FORMAT$DUAL_EWORKER"
D_ADDR="$DUAL_DWAL$DUAL_DWAL_FORMAT$DUAL_DWORKER"
screen -dmSL miner $HCD -epool $DUAL_EPOOL:$DUAL_EPORT -ewal $E_ADDR -epsw $DUAL_EPSW -dpool stratum+tcp://$DUAL_DPOOL:$DUAL_DPORT -dwal $D_ADDR -dpsw $DUAL_DPSW -dcoin $DUAL_DCOIN -allpools $ALL_POOLS -dbg -1 -mport $MPORT -mpsw $MPSW $DUAL_ADDITIONAL_ARGUMENTS
fi in 1bash set : With this new setting you can mine any eth combo you like. Keep calm and carry on mining ... P.S: Let me know how it works. |
|
|
|
$ONOFCOIN
Newbie
Offline
Activity: 7
Merit: 0
|
|
March 28, 2018, 02:34:37 PM |
|
Does anyone know how I can dual mine Ethereum with verge(xvg). I am currently running nvoc 19.2
There is a new dual mining introduced for 19-2.1 (Not released yet), you can try it in 1bash add this after all the other coins : ###################################################
# Claymore_Dual Mining #
# Set COIN="Claymore_Dual" #
###################################################
###You can use variables like this:
#DUAL_ECOIN="ETH"
#DUAL_EPOOL="$ETH_POOL"
#DUAL_EPORT="$ETH_PORT"
#DUAL_EWAL="$ETH_ADDRESS"
#DUAL_EPSW="$MINER_PWD"
#DUAL_EWORKER="$ETH_WORKER"
DUAL_ECOIN="MAIN COIN" #Main Coin, Ethereum or any Ethash Coin
DUAL_EPOOL="MAIN COIN POOL ADDREES" #Main Coin pool address, no need to add stratum+tcp://
DUAL_EPORT="MAIN COIN POOL PORT" #Main Coin Port Number
DUAL_EWAL="MAIN COIN WALLET ADDRESS" #Main Coin Wallet address or pool username
DUAL_EPSW="$MINER_PWD" #Main Coin worker password on pool
DUAL_EWORKER="$WORKER" #Main Coin Worker Name
DUAL_EWAL_FORMAT="." #Set your main pool wallet address format ".", "/", "-"
DUAL_DCOIN="DUAL COIN" #select second coin to mine in dual mode. Possible options are "dcr", "sc", "lbc", "pasc", "blake2s", "keccak". Default value is "dcr".
DUAL_DPOOL="DUAL COIN POOL ADDRESS" #2nd coin pool address
DUAL_DPORT="DUAL COIN POOL PORT" #2nd coin pool address
DUAL_DWAL="DUAL COIN WALLET ADDRESS" #2nd coin wallet address or worker name, it depends on pool.
DUAL_DPSW="$MINER_PWD" #Password for 2nd coin .
DUAL_DWORKER="$WORKER" #Worker name for 2nd coin
DUAL_DWAL_FORMAT="." #Set your dual pool wallet address format ".", "/", "-"
DCRI="40" #2nd coin intensity.
ALL_POOLS="1" #Specify "-allpools 1" if miner does not want to mine on specified pool (because it cannot mine devfee on that pool), but you agree to use some default pools for devfee mining.
MPORT="-3333" #remote monitoring/management port. Default value is -3333 (read-only mode), specify "-mport 0" to disable remote monitoring/management feature.
MPSW="" #remote monitoring/management password.
DUAL_ADDITIONAL_ARGUMENTS="" #add "-allcoins 1" if you mine Ethereum forks or other Ethash coins
in 0miner add : if [[ $COIN == CLAYMORE_DUAL ]]
then
HCD=/home/m1/eth/claymore/$CLAYMORE_VERSION/ethdcrminer64
E_ADDR="$DUAL_EWAL$DUAL_EWAL_FORMAT$DUAL_EWORKER"
D_ADDR="$DUAL_DWAL$DUAL_DWAL_FORMAT$DUAL_DWORKER"
screen -dmSL miner $HCD -epool $DUAL_EPOOL:$DUAL_EPORT -ewal $E_ADDR -epsw $DUAL_EPSW -dpool stratum+tcp://$DUAL_DPOOL:$DUAL_DPORT -dwal $D_ADDR -dpsw $DUAL_DPSW -dcoin $DUAL_DCOIN -allpools $ALL_POOLS -dbg -1 -mport $MPORT -mpsw $MPSW $DUAL_ADDITIONAL_ARGUMENTS
fi in 1bash set : With this new setting you can mine any eth combo you like. Keep calm and carry on mining ... P.S: Let me know how it works. Big thank you. I just have it running, but for some reason I have to change the path $claymore_version to latest for it to work. |
|
|
|
|
ababadababa
Newbie
Offline
Activity: 6
Merit: 0
|
|
March 28, 2018, 02:40:04 PM |
|
hello guys, i am interested if anyone is mining Bash and FRM coin? i got some problems with SNG, if yes please tell me how to? or if you have discussed this earlier just give me a direction. thanks for support to everyone.
|
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
March 28, 2018, 02:40:15 PM |
|
Does anyone know how I can dual mine Ethereum with verge(xvg). I am currently running nvoc 19.2
There is a new dual mining introduced for 19-2.1 (Not released yet), you can try it in 1bash add this after all the other coins : ###################################################
# Claymore_Dual Mining #
# Set COIN="Claymore_Dual" #
###################################################
###You can use variables like this:
#DUAL_ECOIN="ETH"
#DUAL_EPOOL="$ETH_POOL"
#DUAL_EPORT="$ETH_PORT"
#DUAL_EWAL="$ETH_ADDRESS"
#DUAL_EPSW="$MINER_PWD"
#DUAL_EWORKER="$ETH_WORKER"
DUAL_ECOIN="MAIN COIN" #Main Coin, Ethereum or any Ethash Coin
DUAL_EPOOL="MAIN COIN POOL ADDREES" #Main Coin pool address, no need to add stratum+tcp://
DUAL_EPORT="MAIN COIN POOL PORT" #Main Coin Port Number
DUAL_EWAL="MAIN COIN WALLET ADDRESS" #Main Coin Wallet address or pool username
DUAL_EPSW="$MINER_PWD" #Main Coin worker password on pool
DUAL_EWORKER="$WORKER" #Main Coin Worker Name
DUAL_EWAL_FORMAT="." #Set your main pool wallet address format ".", "/", "-"
DUAL_DCOIN="DUAL COIN" #select second coin to mine in dual mode. Possible options are "dcr", "sc", "lbc", "pasc", "blake2s", "keccak". Default value is "dcr".
DUAL_DPOOL="DUAL COIN POOL ADDRESS" #2nd coin pool address
DUAL_DPORT="DUAL COIN POOL PORT" #2nd coin pool address
DUAL_DWAL="DUAL COIN WALLET ADDRESS" #2nd coin wallet address or worker name, it depends on pool.
DUAL_DPSW="$MINER_PWD" #Password for 2nd coin .
DUAL_DWORKER="$WORKER" #Worker name for 2nd coin
DUAL_DWAL_FORMAT="." #Set your dual pool wallet address format ".", "/", "-"
DCRI="40" #2nd coin intensity.
ALL_POOLS="1" #Specify "-allpools 1" if miner does not want to mine on specified pool (because it cannot mine devfee on that pool), but you agree to use some default pools for devfee mining.
MPORT="-3333" #remote monitoring/management port. Default value is -3333 (read-only mode), specify "-mport 0" to disable remote monitoring/management feature.
MPSW="" #remote monitoring/management password.
DUAL_ADDITIONAL_ARGUMENTS="" #add "-allcoins 1" if you mine Ethereum forks or other Ethash coins
in 0miner add : if [[ $COIN == CLAYMORE_DUAL ]]
then
HCD=/home/m1/eth/claymore/$CLAYMORE_VERSION/ethdcrminer64
E_ADDR="$DUAL_EWAL$DUAL_EWAL_FORMAT$DUAL_EWORKER"
D_ADDR="$DUAL_DWAL$DUAL_DWAL_FORMAT$DUAL_DWORKER"
screen -dmSL miner $HCD -epool $DUAL_EPOOL:$DUAL_EPORT -ewal $E_ADDR -epsw $DUAL_EPSW -dpool stratum+tcp://$DUAL_DPOOL:$DUAL_DPORT -dwal $D_ADDR -dpsw $DUAL_DPSW -dcoin $DUAL_DCOIN -allpools $ALL_POOLS -dbg -1 -mport $MPORT -mpsw $MPSW $DUAL_ADDITIONAL_ARGUMENTS
fi in 1bash set : With this new setting you can mine any eth combo you like. Keep calm and carry on mining ... P.S: Let me know how it works. Big thank you. I just have it running, but for some reason I have to change the path $claymore_version to latest for it to work. Glad it helped, Do you set claymore version in 1bash ? CLAYMORE_VERSION="latest" |
|
|
|
$ONOFCOIN
Newbie
Offline
Activity: 7
Merit: 0
|
|
March 29, 2018, 09:00:00 AM |
|
Glad it helped, Do you set claymore version in 1bash ? CLAYMORE_VERSION="latest" [/quote] It didn't seem to work, that why I change it in ominer instead.
|
|
|
|
|
$ONOFCOIN
Newbie
Offline
Activity: 7
Merit: 0
|
|
March 30, 2018, 07:29:18 PM |
|
Have anyone able to mine bitcoinz in nvoc 19.2, I can't seem to get miner to work.
|
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
March 31, 2018, 07:29:00 AM |
|
Have anyone able to mine bitcoinz in nvoc 19.2, I can't seem to get miner to work.
Post your settings |
|
|
|
vega04
Newbie
Offline
Activity: 4
Merit: 0
|
|
April 02, 2018, 08:43:04 AM |
|
Hi, guys
I' using NVOC successfully for months but currently there is only one card left in the rig. I have removed the other cards and the miner didn't start. This card is with extender. Have tried to switch the PCIe slot but nothing.
The card is GTX1080 and is visible with nvidia-smi but the miner is silent.
Can you help me please?
|
|
|
|
|
Fliskr
Newbie
Offline
Activity: 1
Merit: 0
|
|
April 02, 2018, 01:26:52 PM |
|
I am trying to mine Ravencoin, but I can't get it to work. This is what I added. 0miner: if [ $COIN == "RVN" ]
then
HCD='/home/m1/MSFTccminer/ccminer'
ADDR="$RVN_ADDRESS.$RVN_WORKER"
screen -dmSL miner $HCD -a x16r -o stratum+tcp://$RVN_POOL:$RVN_PORT -u $ADDR -p $MINER_PWD -i $RVN_INTENSITY
fi 1bash: RVN_WORKER="workername"
RVN_ADDRESS="Accountname"
RVN_POOL="rvn.suprnova.cc"
RVN_PORT="6667"
RVN_INTENSITY="21" |
|
|
|
|
|
leenoox
|
|
April 03, 2018, 12:44:32 AM |
|
Hi, guys
I' using NVOC successfully for months but currently there is only one card left in the rig. I have removed the other cards and the miner didn't start. This card is with extender. Have tried to switch the PCIe slot but nothing.
The card is GTX1080 and is visible with nvidia-smi but the miner is silent.
Can you help me please?
Did you connect your GPU to the x16 (long PCIe slot) closest to the CPU? Also make sure the integrated GPU is disabled in the bios. |
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
April 03, 2018, 07:36:31 AM |
|
Hi, guys
I' using NVOC successfully for months but currently there is only one card left in the rig. I have removed the other cards and the miner didn't start. This card is with extender. Have tried to switch the PCIe slot but nothing.
The card is GTX1080 and is visible with nvidia-smi but the miner is silent.
Can you help me please?
Did you connect your GPU to the x16 (long PCIe slot) closest to the CPU? Also make sure the integrated GPU is disabled in the bios. What do you mean by "miner is silent"? Does it start but gives error and quits, or it wont start at all? |
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
April 03, 2018, 09:06:21 AM |
|
I am trying to mine Ravencoin, but I can't get it to work. This is what I added. 0miner: if [ $COIN == "RVN" ]
then
HCD='/home/m1/MSFTccminer/ccminer'
ADDR="$RVN_ADDRESS.$RVN_WORKER"
screen -dmSL miner $HCD -a x16r -o stratum+tcp://$RVN_POOL:$RVN_PORT -u $ADDR -p $MINER_PWD -i $RVN_INTENSITY
fi 1bash: RVN_WORKER="workername"
RVN_ADDRESS="Accountname"
RVN_POOL="rvn.suprnova.cc"
RVN_PORT="6667"
RVN_INTENSITY="21" There has been lots of discussions about RVN in discord channel Take a look |
|
|
|
vega04
Newbie
Offline
Activity: 4
Merit: 0
|
|
April 03, 2018, 12:07:11 PM
Last edit: April 03, 2018, 12:55:40 PM by vega04 |
|
Hi, guys
I' using NVOC successfully for months but currently there is only one card left in the rig. I have removed the other cards and the miner didn't start. This card is with extender. Have tried to switch the PCIe slot but nothing.
The card is GTX1080 and is visible with nvidia-smi but the miner is silent.
Can you help me please?
Did you connect your GPU to the x16 (long PCIe slot) closest to the CPU? Also make sure the integrated GPU is disabled in the bios. What do you mean by "miner is silent"? Does it start but gives error and quits, or it wont start at all? I don't know. How to check if there are errors or how to watch what is happening? Something is messed totally i'm getting "ssh: connect to host 192.168.0.102 port 22: No route to host" Yesterday I have edited telegram file and have duplicated and edited some settings. I have duplicated damNmad's settings, set custom name and removed some info and break lines. Can that be the reason that OS is not loading? I have received test message several times and everything was ok. I have set the interval 1440min but today nothing. That was the message if it matters somehow: Worker: 102 Current Hashrate: System Boot Time: 2018-03-31 01:18:10 System Up Time: up 2 days, 3 minutes Miner Uptime: GPU Count: 1 GPU_UTILIZATIONS: 3 TEMPS: 45 POWERDRAW: 20.38 W FAN SPEEDS: 0 % Yes that was the problem at that time. I have removed my "customizations" and it starts normally and got connection. But miner still not working. Now is that: Worker: 102 Current Hashrate: Boot Time: 2018-04-03 05:46:57 System Up Time: up 7 minutes Miner Uptime: Currently Mining: "ZEC" Reboot Required: No GPU Count: 1 GPU Utilization: 100 100 Temp, Fan, Power: GPU 1, Target temp: 60, Current: 56, Diff: 4, Fan: 50, Power: 25 <br> Wed Mar 28 04:22:28 MST 2018 - Restoring Power limit for gpu:1. Old limit: 25 New limit: 125 Fan speed: 50 |
|
|
|
|
vega04
Newbie
Offline
Activity: 4
Merit: 0
|
|
April 03, 2018, 12:24:18 PM
Last edit: April 03, 2018, 12:42:06 PM by vega04 |
|
Hi, guys
I' using NVOC successfully for months but currently there is only one card left in the rig. I have removed the other cards and the miner didn't start. This card is with extender. Have tried to switch the PCIe slot but nothing.
The card is GTX1080 and is visible with nvidia-smi but the miner is silent.
Can you help me please?
Did you connect your GPU to the x16 (long PCIe slot) closest to the CPU? Also make sure the integrated GPU is disabled in the bios. Yes I did. That was the slot before to remove the other card. I have tried both on x16 and x1 but nothing miner didn't work. I'm not sure about the BIOS settings but will connect some monitor, check and reply. Before everything was ok when the other cards was there. |
|
|
|
|
|
