Bitcoin Forum
November 21, 2017, 08:12:00 PM *
News: Latest stable version of Bitcoin Core: 0.15.1  [Torrent].
 
   Home   Help Search Donate Login Register  
Pages: « 1 ... 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 [280] 281 282 283 284 285 286 287 »
  Print  
Author Topic: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4  (Read 327103 times)
Stubo
Jr. Member
*
Offline Offline

Activity: 42


View Profile
November 14, 2017, 05:57:38 PM
 #5581

try to add this https://github.com/krnlx/ccminer-xevan to the version 19-1.4  Roll Eyes
but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips  Wink

Sure. I just compiled it up so I could see how to answer this question. There are a couple of tweaks that are already covered here but here they are again in a non-obfuscated fashion. I am assuming you tried running build.sh and it failed like it did for me the first time. The tweaks are:

1) The version of bn.h at /usr/local/include/openssl/bn.h is problematic so we need to put the correct one in that location. First, in a temporary directory off of /home/m1 (I use XXX in example):
       from /home/m1/XXX do a wget to get a proper openssl:
            wget https://www.openssl.org/source/openssl-1.0.1g.tar.gz
            tar zxvf  openssl-1.0.1g.tar.gz
       Make backup of bh.h and copy over the new version
            sudo mv /usr/local/include/openssl/bn.h /usr/local/include/openssl/bn.h.old
            sudo cp /home/m1/XXX/openssl-1.0.1g/crypto/bn/bn.h /usr/local/include/openssl/
2) The location of the cuda libraries in configure.sh doesn't match nvOC so we need to change it:
      cd /home/m1/XXX/ccminer-xevan-master
      vi configure.sh
           change
              CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda-7.5 --with-nvml=libnvidia-ml.so
           to
              CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda --with-nvml=libnvidia-ml.so

after that, you should be able to build normally by executing build.sh

Hope this helps.

Edit: You can download the version I compiled up from here:
http://www.cstone.net/~stu/nvOC/miners/ccminer-xevan.tar.gz




1511295120
Hero Member
*
Offline Offline

Posts: 1511295120

View Profile Personal Message (Offline)

Ignore
1511295120
Reply with quote  #2

1511295120
Report to moderator
1511295120
Hero Member
*
Offline Offline

Posts: 1511295120

View Profile Personal Message (Offline)

Ignore
1511295120
Reply with quote  #2

1511295120
Report to moderator
1511295120
Hero Member
*
Offline Offline

Posts: 1511295120

View Profile Personal Message (Offline)

Ignore
1511295120
Reply with quote  #2

1511295120
Report to moderator
Join ICO Now A blockchain platform for effective freelancing
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1511295120
Hero Member
*
Offline Offline

Posts: 1511295120

View Profile Personal Message (Offline)

Ignore
1511295120
Reply with quote  #2

1511295120
Report to moderator
1511295120
Hero Member
*
Offline Offline

Posts: 1511295120

View Profile Personal Message (Offline)

Ignore
1511295120
Reply with quote  #2

1511295120
Report to moderator
1511295120
Hero Member
*
Offline Offline

Posts: 1511295120

View Profile Personal Message (Offline)

Ignore
1511295120
Reply with quote  #2

1511295120
Report to moderator
papampi
Full Member
***
Offline Offline

Activity: 140


Linux FOREVER! Resistance is futile!!!


View Profile
November 14, 2017, 06:56:27 PM
 #5582

Please add Bitcoin Gold (BTG) to nvOC. Thank you !


Easy add :


That's my BTG settings:
in 1bash add:

Code:
COIN="BTG"
PAPAMPI_WTM_AUTO_SWITCH="NO"

BTG_WORKER="$WORKERNAME"
BTG_ADDRESS="$SUPRNOVA_NAME"
BTG_POOL="btg.suprnova.cc"
BTG_PORT="8816"
and in 3main add:
Code:
if [ $COIN == "BTG" ]
then

if [ $EWBF_VERSION == "3_3" ]
then
HCD='/home/m1/zec/v3_3/miner'
fi

if [ $EWBF_VERSION == "3_4" ]
then
HCD='/home/m1/zec/v3_4/miner'
fi

BTGADDR="$BTG_ADDRESS.$BTG_WORKER"

if [ $ZM_or_EWBF == "ZM" ]
then
HCD='/home/m1/zec/zm/5_2/zm_miner'
screen -dmSL miner $HCD --server $BTG_POOL --user $BTGADDR --pass z --port $BTG_PORT;
fi

if [ $ZM_or_EWBF == "EWBF" ]
then
screen -dmSL miner $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $BTG_POOL --user $BTGADDR --pass z --port $BTG_PORT;
fi

if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi

BITCOIN="theGROUND"

while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi


BTG is not on whattomine. So the switcher will not run.

fredeq in wtm thread said he is working on it to add it to wtm soon.

Mining pools are opening for Bitcoin Gold...
Any plans in near future to add it to wtm calculator?

Yes, will research this coin soon.


thanks to all that help continue to develop/add to/refine nvoc

Can I add BTG to nvoc 17? and if so how exactly?


also plans on adding DSTM miner?


dstm already included since 19-1.3
I already posted a how to upgrade a few pages back
infowire
Jr. Member
*
Offline Offline

Activity: 46


View Profile
November 14, 2017, 08:02:56 PM
 #5583

Is there a way if it freezes do a restart ? Or Wheres claymore located ? "reboot.bash" or "reboot.sh" need to be in that dir.
papampi
Full Member
***
Offline Offline

Activity: 140


Linux FOREVER! Resistance is futile!!!


View Profile
November 14, 2017, 08:25:33 PM
 #5584

Is there a way if it freezes do a restart ? Or Wheres claymore located ? "reboot.bash" or "reboot.sh" need to be in that dir.

Usually you shouldn't get any freezes on nvOC, If you enable wdog it will restart miner and reboot system when needed
gs777
Jr. Member
*
Offline Offline

Activity: 52


View Profile
November 15, 2017, 12:12:13 AM
 #5585

Sorry for probably "simple" question
Is it possible to mine Nicehash-Equihash in nvOC?
crazydane
Full Member
***
Offline Offline

Activity: 126


View Profile
November 15, 2017, 12:14:20 AM
 #5586

Yes.  Just make the coin "NICE_EQUIHASH" and enter your NH BTC wallet address (BTC_ADDRESS) in the proper place in 1bash.
gs777
Jr. Member
*
Offline Offline

Activity: 52


View Profile
November 15, 2017, 12:23:00 AM
 #5587

Yes.  Just make the coin "NICE_EQUIHASH" and enter your NH BTC wallet address (BTC_ADDRESS) in the proper place in 1main.

Thanks for the answer
about proper place, did you mean 3main?
CyberGI
Newbie
*
Offline Offline

Activity: 8


View Profile
November 15, 2017, 02:27:37 AM
 #5588

Yes.  Just make the coin "NICE_EQUIHASH" and enter your NH BTC wallet address (BTC_ADDRESS) in the proper place in 1main.

Thanks for the answer
about proper place, did you mean 3main?


I think he meant 1bash.
papampi
Full Member
***
Offline Offline

Activity: 140


Linux FOREVER! Resistance is futile!!!


View Profile
November 15, 2017, 05:17:57 AM
 #5589

Yes.  Just make the coin "NICE_EQUIHASH" and enter your NH BTC wallet address (BTC_ADDRESS) in the proper place in 1main.

Thanks for the answer
about proper place, did you mean 3main?


I think he meant 1bash.

Nice_equihash already included, just select it as coin
366Cobra
Newbie
*
Offline Offline

Activity: 3


View Profile
November 15, 2017, 08:17:42 AM
 #5590

wow, what a cool project!!

Sorry to barge in like this.  I am only on page 7 so far and am sure the answer to my question is in the next 273 pages Wink

Is there a way to run a script or is there a list of things to install on an existing Ubuntu LTS?
My rig is our media center and file share server, but would like to add a dozen cards or so (asus mining expert) to do some mining, as it is idle most of the time.

Thanks
366Cobra
papampi
Full Member
***
Offline Offline

Activity: 140


Linux FOREVER! Resistance is futile!!!


View Profile
November 15, 2017, 09:12:38 AM
 #5591

wow, what a cool project!!

Sorry to barge in like this.  I am only on page 7 so far and am sure the answer to my question is in the next 273 pages Wink

Is there a way to run a script or is there a list of things to install on an existing Ubuntu LTS?
My rig is our media center and file share server, but would like to add a dozen cards or so (asus mining expert) to do some mining, as it is idle most of the time.

Thanks
366Cobra


I think its easier to reformat your existing ubuntu and install nvOC then install and set samba, nfs,... and any thing else you need for your media center instead of going through installing and setting up nvOC over an existing ubuntu.
papampi
Full Member
***
Offline Offline

Activity: 140


Linux FOREVER! Resistance is futile!!!


View Profile
November 15, 2017, 09:47:30 AM
 #5592

Another IAmNotAJeep_and_Maxximus007_WATCHDOG Mod

I had my Verizon FIOS service upgraded the other day and I was unable to shutdown all of my miners before the tech interrupted my internet. This made me scrutinize how the watchdog handles that situation (not very well, IMO) so I made the following modification to just wait on internet service to return rather than just looping, restarting mining, and restarting the host as usual.

Code:
<cut>
      if [ $COUNT -le 0 ]
      then
# Begin Stubo Mod
# Wait for Internet
         while ! nc -vzw1 google.com 443;
         do
   echo "Internet is down, checking again in 30 seconds..." | tee -a ${LOG_FILE} ${ALERT_LOG_FILE}
            sleep 30
         done
#
#         INTERNET_IS_GO=0
#  
#         if nc -vzw1 google.com 443;
#         #if nc -vzw1 $POOL 80;
#         then
#            INTERNET_IS_GO=1
#         fi
         echo ""

#         if [[ $RESTART -gt 4 && $INTERNET_IS_GO == 1 ]]
         if [ $RESTART -gt 4 ]
         # End Stubo Mod
         then
            echo "$(date) - Utilization is too low: reviving did not work so restarting system in 10 seconds" | tee -a ${LOG_FILE} ${ALERT_LOG_FILE}
<cut>

Let me know if you have any questions or see room for improvement in this modification.


I just made some changes to your addition so after checking google for internet it checks coin pool server then it goes for the rest of its job ...
Because I'm not using any dual coin mining and salfter switches I havent gone through the hassle of checking their pool too.

Please check, test and let me know what you think


Code:
<cut>


  if [ $COUNT -le 0 ]
      then
# Begin Stubo Mod
# Wait for Internet
         while ! nc -vzw1 google.com 443;
         do
   echo "Internet is down, checking again in 30 seconds..." | tee -a ${LOG_FILE} ${ALERT_LOG_FILE}
            sleep 30
         done

       # Begin papampi Mod

source /home/m1/1bash

CURRENT_COIN=$(head -n 200 /home/m1/1bash | grep COIN= | sed 's/COIN=//' | sed 's/\"//' | sed 's/\"//')
#echo "$CURRENT_COIN"

CURRENT_COIN_POOL=$(echo {$CURRENT_COIN}_POOL |sed 's/{//' | sed 's/}//' )
#echo $CURRENT_COIN_POOL

POOL_SERVER=$(cat /home/m1/1bash | grep $CURRENT_COIN_POOL | grep -o '".*"' | sed 's/"//'| sed 's/"//')
#echo "$POOL_SERVER"

CURRENT_COIN_PORT=$(echo {$CURRENT_COIN}_PORT | sed 's/{//' | sed 's/}//')
#echo "$CURRENT_COIN_PORT"

if [[ $POOL_SERVER == *stratum* ]]
then
    #echo "stratum"
    PING_SERVER=$( cat /home/m1/1bash | grep $CURRENT_COIN_POOL | grep -o '".*"' | sed 's/"//'| sed 's/"//' | sed 's/stratum+tcp\?:\/\///' | cut -d':' -f1 )
    #echo "Server: $PING_SERVER"
    PING_PORT=$(cat /home/m1/1bash | grep $CURRENT_COIN_POOL | grep -o '".*"' | sed 's/"//'| sed 's/"//' | sed 's/stratum+tcp\?:\/\///' | grep -Eo '[0-9]+$' )
    #echo "Port: $PING_PORT"    

if nc -vzw2 $PING_SERVER $PING_PORT;
    then
        # echo "Strartum Server, INTERNET_IS_GO=1"
        INTERNET_IS_GO=1
    else
        echo "WARNING:  $(date) - Mining Pool Stratum Server is DOWN" | tee -a ${LOG_FILE} ${ALERT_LOG_FILE}
        INTERNET_IS_GO=0
    fi
    
elif [[ $CURRENT_COIN == *DUAL*  || $CURRENT_COIN == *ZPOOL_SKUNK* || $CURRENT_COIN == *SALFTER*  ]]
then
    #echo "Dual mining, check google"
    if nc -vzw2 google.com 443
    then
        # echo "Dual mining, google is up"
        #echo "            INTERNET_IS_GO=1"
        INTERNET_IS_GO=1
    else
        #echo "Dual mining, google is down"
        echo "WARNING:  $(date) - Cant reach google" | tee -a ${LOG_FILE} ${ALERT_LOG_FILE}
        INTERNET_IS_GO=0
    fi
    
else
      PING_SERVER=$( cat /home/m1/1bash | grep $CURRENT_COIN_POOL | grep -o '".*"' | sed 's/"//'| sed 's/"//')
      #echo "Server: $PING_SERVER"
      PING_PORT=$(cat /home/m1/1bash | grep $CURRENT_COIN_PORT | grep -o '".*"' | sed 's/"//' |sed 's/"//')
      #echo "Port: $PING_PORT"
      if nc -vzw1 $PING_SERVER $PING_PORT
    then
        #echo "Not a stratum server,INTERNET_IS_GO=1" | tee -a ${LOG_FILE}
        INTERNET_IS_GO=1
    else
        echo "WARNING:  $(date) - Mining Pool Server is DOWN" | tee -a ${LOG_FILE} ${ALERT_LOG_FILE}
        INTERNET_IS_GO=0
    fi
fi


       # End papampi Mod


#         INTERNET_IS_GO=0
 
#         if nc -vzw1 google.com 443;
#         #if nc -vzw1 $POOL 80;
#         then
#            INTERNET_IS_GO=1
#         fi
         echo ""

         if [[ $RESTART -gt 4 && $INTERNET_IS_GO == 1 ]]
#         if [ $RESTART -gt 4 ]
         # End Stubo Mod
         then
            echo "$(date) - Utilization is too low: reviving did not work so restarting system in 10 seconds" | tee -a ${LOG_FILE} ${ALERT_LOG_FILE}


<cut>

Edited to add server port too.
oktoshiimin
Newbie
*
Offline Offline

Activity: 23


View Profile
November 15, 2017, 10:23:25 AM
 #5593

try to add this https://github.com/krnlx/ccminer-xevan to the version 19-1.4  Roll Eyes
but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips  Wink

Sure. I just compiled it up so I could see how to answer this question. There are a couple of tweaks that are already covered here but here they are again in a non-obfuscated fashion. I am assuming you tried running build.sh and it failed like it did for me the first time. The tweaks are:

1) The version of bn.h at /usr/local/include/openssl/bn.h is problematic so we need to put the correct one in that location. First, in a temporary directory off of /home/m1 (I use XXX in example):
       from /home/m1/XXX do a wget to get a proper openssl:
            wget https://www.openssl.org/source/openssl-1.0.1g.tar.gz
            tar zxvf  openssl-1.0.1g.tar.gz
       Make backup of bh.h and copy over the new version
            sudo mv /usr/local/include/openssl/bn.h /usr/local/include/openssl/bn.h.old
            sudo cp /home/m1/XXX/openssl-1.0.1g/crypto/bn/bn.h /usr/local/include/openssl/
2) The location of the cuda libraries in configure.sh doesn't match nvOC so we need to change it:
      cd /home/m1/XXX/ccminer-xevan-master
      vi configure.sh
           change
              CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda-7.5 --with-nvml=libnvidia-ml.so
           to
              CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda --with-nvml=libnvidia-ml.so

after that, you should be able to build normally by executing build.sh

Hope this helps.

Edit: You can download the version I compiled up from here:
http://www.cstone.net/~stu/nvOC/miners/ccminer-xevan.tar.gz






You are right, I got the same error you mentioned above
and I try on the version you provided, it working great  Cheesy
thank you so much
papampi
Full Member
***
Offline Offline

Activity: 140


Linux FOREVER! Resistance is futile!!!


View Profile
November 15, 2017, 10:28:35 AM
 #5594

try to add this https://github.com/krnlx/ccminer-xevan to the version 19-1.4  Roll Eyes
but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips  Wink

Sure. I just compiled it up so I could see how to answer this question. There are a couple of tweaks that are already covered here but here they are again in a non-obfuscated fashion. I am assuming you tried running build.sh and it failed like it did for me the first time. The tweaks are:

1) The version of bn.h at /usr/local/include/openssl/bn.h is problematic so we need to put the correct one in that location. First, in a temporary directory off of /home/m1 (I use XXX in example):
       from /home/m1/XXX do a wget to get a proper openssl:
            wget https://www.openssl.org/source/openssl-1.0.1g.tar.gz
            tar zxvf  openssl-1.0.1g.tar.gz
       Make backup of bh.h and copy over the new version
            sudo mv /usr/local/include/openssl/bn.h /usr/local/include/openssl/bn.h.old
            sudo cp /home/m1/XXX/openssl-1.0.1g/crypto/bn/bn.h /usr/local/include/openssl/
2) The location of the cuda libraries in configure.sh doesn't match nvOC so we need to change it:
      cd /home/m1/XXX/ccminer-xevan-master
      vi configure.sh
           change
              CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda-7.5 --with-nvml=libnvidia-ml.so
           to
              CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda --with-nvml=libnvidia-ml.so

after that, you should be able to build normally by executing build.sh

Hope this helps.

Edit: You can download the version I compiled up from here:
http://www.cstone.net/~stu/nvOC/miners/ccminer-xevan.tar.gz






You are right, I got the same error you mentioned above
and I try on the version you provided, it working great  Cheesy
thank you so much

Can I ask which coins you use ccminer-xevan for and what are the hash rate difference compare to nvOC default miners?
damNmad
Full Member
***
Offline Offline

Activity: 168



View Profile
November 15, 2017, 11:01:38 AM
 #5595

try to add this https://github.com/krnlx/ccminer-xevan to the version 19-1.4  Roll Eyes
but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips  Wink

Sure. I just compiled it up so I could see how to answer this question. There are a couple of tweaks that are already covered here but here they are again in a non-obfuscated fashion. I am assuming you tried running build.sh and it failed like it did for me the first time. The tweaks are:

1) The version of bn.h at /usr/local/include/openssl/bn.h is problematic so we need to put the correct one in that location. First, in a temporary directory off of /home/m1 (I use XXX in example):
       from /home/m1/XXX do a wget to get a proper openssl:
            wget https://www.openssl.org/source/openssl-1.0.1g.tar.gz
            tar zxvf  openssl-1.0.1g.tar.gz
       Make backup of bh.h and copy over the new version
            sudo mv /usr/local/include/openssl/bn.h /usr/local/include/openssl/bn.h.old
            sudo cp /home/m1/XXX/openssl-1.0.1g/crypto/bn/bn.h /usr/local/include/openssl/
2) The location of the cuda libraries in configure.sh doesn't match nvOC so we need to change it:
      cd /home/m1/XXX/ccminer-xevan-master
      vi configure.sh
           change
              CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda-7.5 --with-nvml=libnvidia-ml.so
           to
              CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda --with-nvml=libnvidia-ml.so

after that, you should be able to build normally by executing build.sh

Hope this helps.

Edit: You can download the version I compiled up from here:
http://www.cstone.net/~stu/nvOC/miners/ccminer-xevan.tar.gz






You are right, I got the same error you mentioned above
and I try on the version you provided, it working great  Cheesy
thank you so much

Can I ask which coins you use ccminer-xevan for and what are the hash rate difference compare to nvOC default miners?

It is used to mine BSD and we currently don't have any ccminer forks supporting this algo.

We also have instructions on here http://nvoc-mining-os.com/2017/11/13/add-ccminer-xevan-nvoc/

@Stubo you doing a great job, i would love to have you on board on our discord channel Smiley


▀     DeepOnion  |  TOR Integrated & Secured  [ Facebook  Telegram  Bitcointalk  Twitter  Youtube  Reddit ]     ▀
Your Anonymity Guaranteed  ★  Your Assets Secured by TOR  ★  Guard Your Privacy!   ❱❱❱ JOIN AIRDROP NOW!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬  File Authenticity Guaranteed by DeepVault  ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
oktoshiimin
Newbie
*
Offline Offline

Activity: 23


View Profile
November 15, 2017, 11:18:26 AM
 #5596

try to add this https://github.com/krnlx/ccminer-xevan to the version 19-1.4  Roll Eyes
but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips  Wink

Sure. I just compiled it up so I could see how to answer this question. There are a couple of tweaks that are already covered here but here they are again in a non-obfuscated fashion. I am assuming you tried running build.sh and it failed like it did for me the first time. The tweaks are:

1) The version of bn.h at /usr/local/include/openssl/bn.h is problematic so we need to put the correct one in that location. First, in a temporary directory off of /home/m1 (I use XXX in example):
       from /home/m1/XXX do a wget to get a proper openssl:
            wget https://www.openssl.org/source/openssl-1.0.1g.tar.gz
            tar zxvf  openssl-1.0.1g.tar.gz
       Make backup of bh.h and copy over the new version
            sudo mv /usr/local/include/openssl/bn.h /usr/local/include/openssl/bn.h.old
            sudo cp /home/m1/XXX/openssl-1.0.1g/crypto/bn/bn.h /usr/local/include/openssl/
2) The location of the cuda libraries in configure.sh doesn't match nvOC so we need to change it:
      cd /home/m1/XXX/ccminer-xevan-master
      vi configure.sh
           change
              CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda-7.5 --with-nvml=libnvidia-ml.so
           to
              CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda --with-nvml=libnvidia-ml.so

after that, you should be able to build normally by executing build.sh

Hope this helps.

Edit: You can download the version I compiled up from here:
http://www.cstone.net/~stu/nvOC/miners/ccminer-xevan.tar.gz






You are right, I got the same error you mentioned above
and I try on the version you provided, it working great  Cheesy
thank you so much

Can I ask which coins you use ccminer-xevan for and what are the hash rate difference compare to nvOC default miners?

mine rig is around 27MH/s with -i 19 on 13x1060, still trying on few coins VSX, AmsterdamCoin Ural & BitSend
damNmad
Full Member
***
Offline Offline

Activity: 168



View Profile
November 15, 2017, 11:26:17 AM
 #5597

try to add this https://github.com/krnlx/ccminer-xevan to the version 19-1.4  Roll Eyes
but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips  Wink

Sure. I just compiled it up so I could see how to answer this question. There are a couple of tweaks that are already covered here but here they are again in a non-obfuscated fashion. I am assuming you tried running build.sh and it failed like it did for me the first time. The tweaks are:

1) The version of bn.h at /usr/local/include/openssl/bn.h is problematic so we need to put the correct one in that location. First, in a temporary directory off of /home/m1 (I use XXX in example):
       from /home/m1/XXX do a wget to get a proper openssl:
            wget https://www.openssl.org/source/openssl-1.0.1g.tar.gz
            tar zxvf  openssl-1.0.1g.tar.gz
       Make backup of bh.h and copy over the new version
            sudo mv /usr/local/include/openssl/bn.h /usr/local/include/openssl/bn.h.old
            sudo cp /home/m1/XXX/openssl-1.0.1g/crypto/bn/bn.h /usr/local/include/openssl/
2) The location of the cuda libraries in configure.sh doesn't match nvOC so we need to change it:
      cd /home/m1/XXX/ccminer-xevan-master
      vi configure.sh
           change
              CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda-7.5 --with-nvml=libnvidia-ml.so
           to
              CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda --with-nvml=libnvidia-ml.so

after that, you should be able to build normally by executing build.sh

Hope this helps.

Edit: You can download the version I compiled up from here:
http://www.cstone.net/~stu/nvOC/miners/ccminer-xevan.tar.gz






You are right, I got the same error you mentioned above
and I try on the version you provided, it working great  Cheesy
thank you so much

Can I ask which coins you use ccminer-xevan for and what are the hash rate difference compare to nvOC default miners?

mine rig is around 27MH/s with -i 19 on 13x1060, still trying on few coins VSX, AmsterdamCoin Ural & BitSend

Good to know other coins too, i only know BSD so far Cheesy

you mind sharing your OC settings while mining xevan, i also use 1060 too so Smiley

Thanks in advance.

▀     DeepOnion  |  TOR Integrated & Secured  [ Facebook  Telegram  Bitcointalk  Twitter  Youtube  Reddit ]     ▀
Your Anonymity Guaranteed  ★  Your Assets Secured by TOR  ★  Guard Your Privacy!   ❱❱❱ JOIN AIRDROP NOW!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬  File Authenticity Guaranteed by DeepVault  ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
oktoshiimin
Newbie
*
Offline Offline

Activity: 23


View Profile
November 15, 2017, 12:01:05 PM
 #5598

try to add this https://github.com/krnlx/ccminer-xevan to the version 19-1.4  Roll Eyes
but failed at build.sh, is any one successful install ccminer-xevan? can give me some tips  Wink

Sure. I just compiled it up so I could see how to answer this question. There are a couple of tweaks that are already covered here but here they are again in a non-obfuscated fashion. I am assuming you tried running build.sh and it failed like it did for me the first time. The tweaks are:

1) The version of bn.h at /usr/local/include/openssl/bn.h is problematic so we need to put the correct one in that location. First, in a temporary directory off of /home/m1 (I use XXX in example):
       from /home/m1/XXX do a wget to get a proper openssl:
            wget https://www.openssl.org/source/openssl-1.0.1g.tar.gz
            tar zxvf  openssl-1.0.1g.tar.gz
       Make backup of bh.h and copy over the new version
            sudo mv /usr/local/include/openssl/bn.h /usr/local/include/openssl/bn.h.old
            sudo cp /home/m1/XXX/openssl-1.0.1g/crypto/bn/bn.h /usr/local/include/openssl/
2) The location of the cuda libraries in configure.sh doesn't match nvOC so we need to change it:
      cd /home/m1/XXX/ccminer-xevan-master
      vi configure.sh
           change
              CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda-7.5 --with-nvml=libnvidia-ml.so
           to
              CUDA_CFLAGS="-O3 -lineno -Xcompiler -Wall -D_FORCE_INLINES" ./configure CXXFLAGS="-O3 $extracflags" --with-cuda=/usr/local/cuda --with-nvml=libnvidia-ml.so

after that, you should be able to build normally by executing build.sh

Hope this helps.

Edit: You can download the version I compiled up from here:
http://www.cstone.net/~stu/nvOC/miners/ccminer-xevan.tar.gz






You are right, I got the same error you mentioned above
and I try on the version you provided, it working great  Cheesy
thank you so much

Can I ask which coins you use ccminer-xevan for and what are the hash rate difference compare to nvOC default miners?

mine rig is around 27MH/s with -i 19 on 13x1060, still trying on few coins VSX, AmsterdamCoin Ural & BitSend

Good to know other coins too, i only know BSD so far Cheesy

you mind sharing your OC settings while mining xevan, i also use 1060 too so Smiley

Thanks in advance.

my rig core=150 memory=100 in 1bash, ccminer add -i 19
is working on my rig  Cheesy, but im not sure is the best setting
Rumo
Newbie
*
Offline Offline

Activity: 24


View Profile
November 15, 2017, 12:42:21 PM
 #5599

I think BTCZ was removed from Whattomine. Any idea why?
papampi
Full Member
***
Offline Offline

Activity: 140


Linux FOREVER! Resistance is futile!!!


View Profile
November 15, 2017, 01:01:49 PM
 #5600

I think BTCZ was removed from Whattomine. Any idea why?

Seems like there was a problem, I noticed this morning that it was on top with constant profit for more than 5 hours

If you use wtm auto switch and it still mining btcz , just open WTM_top_coin and change it from btcz to one of your other coins
It will grab new data and continue until btcz comes online again
Pages: « 1 ... 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 [280] 281 282 283 284 285 286 287 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!