[ANN][YAC] YACoin ongoing development

[Qxw]

I just tried mining for a day on yac.coinmine.pl

with 4x R7 240 4 GB.

each card hashes at about 340 h/s.

The problem is all the values of the miner are 0 and most values of the pool are very inaccurate.
Probably due to the fact that anything below 1 khash is rounded or not shown.

Do not mind pool statistics numbers as hashing speed or estimated reward.


What matter is amount of YAC you get to your account.

 (Note also 520 confirmation delay, nearly 9  hours)

Can you tell amount of coins what you get per hour?

Or example what is unconfirmed total amount after 9 hours of mining. 

[1715200441]

1715200441

[1715200441]

1715200441

[1715200441]

1715200441

[1715200441]

1715200441

[1715200441]

1715200441

[Grim]

I canceled pool payouts and add confirmed and unconfirmed ...

[Grim]

4x 340 hash/s should give true 1200 hash/s (work utility)

so you guys tell me what to expect with 1.2 khash/s in yac per day ...

imo about 1300 to 1500 yac

my confirmed and unconfirmed after exactly 24h was about 650 yac

I'm now into 37 hours and it doesn't look to catch up at all.

PS:
in the past such calculations worked out just fine (n14 + n15)

[Qxw]

4x 340 hash/s should give true 1200 hash/s (work utility)

so you guys tell me what to expect with 1.2 khash/s in yac per day ...

imo about 1300 to 1500 yac

my confirmed and unconfirmed after exactly 24h was about 650 yac

I'm now into 37 hours and it doesn't look to catch up at all.

PS:
in the past such calculations worked out just fine (n14 + n15)

650 YAC is too low for this your miner. (with today total net hashrate)


Go to your account and there transactions.

Take copypaste about ~20 last credits.

Here example


Last there is block number and amount of YAC

22316112 2014-10-01 09:53:14 Credit Unconfirmed    733310 4.33114867
22316072 2014-10-01 09:51:14 Credit Unconfirmed    733309(Block) 6.30415787 (YAC)
22316020 2014-10-01 09:49:14 Credit Unconfirmed    733308 6.19066049
22315981 2014-10-01 09:45:15 Credit Unconfirmed    733306 8.06108196
22315940 2014-10-01 09:43:14 Credit Unconfirmed    733305 5.85000185
22315892 2014-10-01 09:39:16 Credit Unconfirmed    733302 4.84135920
22315857 2014-10-01 09:35:21 Credit Unconfirmed    733298 5.09200481
22315840 2014-10-01 09:35:19 Credit Unconfirmed    733297 9.21624784
22315824 2014-10-01 09:35:17 Credit Unconfirmed    733296 6.36020314
22315804 2014-10-01 09:35:15 Credit Unconfirmed    733295 6.64838603
22315780 2014-10-01 09:33:19 Credit Unconfirmed    733293 5.27050720
22315753 2014-10-01 09:33:17 Credit Unconfirmed    733292 4.07729032
22315722 2014-10-01 09:33:15 Credit Unconfirmed    733290 4.23483488
22315692 2014-10-01 09:31:17 Credit Unconfirmed    733289 7.39757501
22315647 2014-10-01 09:31:15 Credit Unconfirmed    733287 6.29055092
22315609 2014-10-01 09:27:27 Credit Unconfirmed    733285 7.74286435
22315577 2014-10-01 09:27:20 Credit Unconfirmed    733284 2.87797119
22315542 2014-10-01 09:27:18 Credit Unconfirmed    733283 4.13941994
22315511 2014-10-01 09:25:15 Credit Unconfirmed    733281 4.72250791
22315479 2014-10-01 09:23:17 Credit Unconfirmed    733280 8.85505025

I know now your hashrate (your miner showed hash rate) and I know my hashrate so I can do some kind of estimate if you have too low reward.

What is your accepted and invalids typically (%) bottom of dashboard?

[Grim]

22316340   2014-10-01 10:03:15   Credit   Unconfirmed         733320   1.50679363
22316304   2014-10-01 10:01:17   Credit   Unconfirmed         733319   1.55030560
22316250   2014-10-01 09:59:15   Credit   Unconfirmed         733316   0.43363034
22316212   2014-10-01 09:57:20   Credit   Unconfirmed         733313   5.59282703
22316197   2014-10-01 09:57:18   Credit   Unconfirmed         733312   0.94767658
22316167   2014-10-01 09:57:15   Credit   Unconfirmed         733311   0.79072479
22316087   2014-10-01 09:51:14   Credit   Unconfirmed         733309   1.16129224
22316036   2014-10-01 09:49:14   Credit   Unconfirmed         733308   1.35420698
22315992   2014-10-01 09:45:15   Credit   Unconfirmed         733306   2.30316628
22315956   2014-10-01 09:43:14   Credit   Unconfirmed         733305   0.81627933
22315906   2014-10-01 09:39:16   Credit   Unconfirmed         733302   0.40344660
22315864   2014-10-01 09:35:21   Credit   Unconfirmed         733298   2.54600240
22315790   2014-10-01 09:33:19   Credit   Unconfirmed         733293   2.63525360
22315704   2014-10-01 09:31:17   Credit   Unconfirmed         733289   1.30545441
22315662   2014-10-01 09:31:15   Credit   Unconfirmed         733287   1.30149329
22315554   2014-10-01 09:27:18   Credit   Unconfirmed         733283   1.18269141
22315520   2014-10-01 09:25:15   Credit   Unconfirmed         733281   1.57416931
22315492   2014-10-01 09:23:17   Credit   Unconfirmed         733280   3.54202010
22315462   2014-10-01 09:23:14   Credit   Unconfirmed         733279   0.54824572
22315414   2014-10-01 09:19:15   Credit   Unconfirmed         733276   0.67089192
22315369   2014-10-01 09:17:15   Credit   Unconfirmed         733274   1.34660404
22315331   2014-10-01 09:15:15   Credit   Unconfirmed         733272   1.75452770
22315260   2014-10-01 09:13:14   Credit   Unconfirmed         733268   2.09565559
22315227   2014-10-01 09:11:14   Credit   Unconfirmed         733266   0.28170141
22315167   2014-10-01 09:09:15   Credit   Unconfirmed         733264   1.69457343
22315133   2014-10-01 09:07:17   Credit   Unconfirmed         733263   1.10741843
22315097   2014-10-01 09:07:15   Credit   Unconfirmed         733261   1.17533640
22315058   2014-10-01 09:03:15   Credit   Unconfirmed         733258   0.48356682
22315004   2014-10-01 08:59:17   Credit   Unconfirmed         733255   0.33286607
22314963   2014-10-01 08:59:15   Credit   Unconfirmed         733254   1.24300278



efficiency 100% (miner shows 7 rejected shares in 37 hours)

[Beave162]

4x 340 hash/s should give true 1200 hash/s (work utility)

so you guys tell me what to expect with 1.2 khash/s in yac per day ...

imo about 1300 to 1500 yac

my confirmed and unconfirmed after exactly 24h was about 650 yac

I'm now into 37 hours and it doesn't look to catch up at all.

PS:
in the past such calculations worked out just fine (n14 + n15)

As a brainstorm and without diving too much into it, I wonder if estimations assume pool hashrate as total network hashrate. At NFactor 14,15 it just so happened that coinmine dominated total network hashrate, so a mistake like that would have had negligible impacts.

I think it is time the pools post in hash/s vs khash/s. I contacted yac.m-s-t.org about it a while back, but it will be worth doing again, yac.coinmine.pl especially.

In other news, YAC is in THIRD place in voting at www.crypto-trade.com/voting. If nothing changes, YAC will be listed on that exchange (including a USD/YAC pair) in 6 weeks! It would be great to see it not be leap-frogged by another coin, but I guarantee it will require more votes. I'd love to see it happen organically without any more BTC donated to get YAC on that exchange.

[Qxw]

22316340   2014-10-01 10:03:15   Credit   Unconfirmed         733320   1.50679363
22316304   2014-10-01 10:01:17   Credit   Unconfirmed         733319   1.55030560
22316250   2014-10-01 09:59:15   Credit   Unconfirmed         733316   0.43363034
22316212   2014-10-01 09:57:20   Credit   Unconfirmed         733313   5.59282703
22316197   2014-10-01 09:57:18   Credit   Unconfirmed         733312   0.94767658
22316167   2014-10-01 09:57:15   Credit   Unconfirmed         733311   0.79072479
22316087   2014-10-01 09:51:14   Credit   Unconfirmed         733309   1.16129224
22316036   2014-10-01 09:49:14   Credit   Unconfirmed         733308   1.35420698
22315992   2014-10-01 09:45:15   Credit   Unconfirmed         733306   2.30316628
22315956   2014-10-01 09:43:14   Credit   Unconfirmed         733305   0.81627933
22315906   2014-10-01 09:39:16   Credit   Unconfirmed         733302   0.40344660
22315864   2014-10-01 09:35:21   Credit   Unconfirmed         733298   2.54600240
22315790   2014-10-01 09:33:19   Credit   Unconfirmed         733293   2.63525360
22315704   2014-10-01 09:31:17   Credit   Unconfirmed         733289   1.30545441
22315662   2014-10-01 09:31:15   Credit   Unconfirmed         733287   1.30149329
22315554   2014-10-01 09:27:18   Credit   Unconfirmed         733283   1.18269141
22315520   2014-10-01 09:25:15   Credit   Unconfirmed         733281   1.57416931
22315492   2014-10-01 09:23:17   Credit   Unconfirmed         733280   3.54202010
22315462   2014-10-01 09:23:14   Credit   Unconfirmed         733279   0.54824572
22315414   2014-10-01 09:19:15   Credit   Unconfirmed         733276   0.67089192
22315369   2014-10-01 09:17:15   Credit   Unconfirmed         733274   1.34660404
22315331   2014-10-01 09:15:15   Credit   Unconfirmed         733272   1.75452770
22315260   2014-10-01 09:13:14   Credit   Unconfirmed         733268   2.09565559
22315227   2014-10-01 09:11:14   Credit   Unconfirmed         733266   0.28170141
22315167   2014-10-01 09:09:15   Credit   Unconfirmed         733264   1.69457343
22315133   2014-10-01 09:07:17   Credit   Unconfirmed         733263   1.10741843
22315097   2014-10-01 09:07:15   Credit   Unconfirmed         733261   1.17533640
22315058   2014-10-01 09:03:15   Credit   Unconfirmed         733258   0.48356682
22315004   2014-10-01 08:59:17   Credit   Unconfirmed         733255   0.33286607
22314963   2014-10-01 08:59:15   Credit   Unconfirmed         733254   1.24300278



efficiency 100% (miner shows 7 rejected shares in 37 hours)

Now it is clear. Something is not ok and you really do not get enough if rig is 4x 0.34kh/s (>1.3kh/s brut. total) and all works optimally.

I can not help with R7 240 4Gb settings (and also there is many other things that just card model)  because I use Nvidia 750 Ti rigs for YAC. (one 750Ti give around 0.3 - 0.33kh/s with very conservative OC and also with 1x risers. (1x risers also drop  small amount of hashrate when use with Nvidia cards but  Radeons are different and risers do not mean "anything")

If you look pool  statistics and there Graphs, what it tell about your hashing speed (if yoy try estimate some kind of average from graph)

(With R9 280x rigs I meet so severe difficulties with chacha N16  that I give hands up with these, partially also due to lack of time to do exercises, and I leave these for N14 mining)

I have one R7 240 4Gb waiting on my table for some tests later after I get some free  time and some HW for start testing with it.

[Grim]

Only the first 6 miners at https://www2.coinmine.pl/yac show a hashrate above 1 khash,
I do believe many miners there share the same issues as I do at that pool.


It seems to me that the pool doesn't count every share.

[Grim]

yep just switched to http://yac.m-s-t.org and everything works out fine ...


https://www2.coinmine.pl/yac has a share count issue !!!!

[ivanlabrie]

4x 340 hash/s should give true 1200 hash/s (work utility)

so you guys tell me what to expect with 1.2 khash/s in yac per day ...

imo about 1300 to 1500 yac

my confirmed and unconfirmed after exactly 24h was about 650 yac

I'm now into 37 hours and it doesn't look to catch up at all.

PS:
in the past such calculations worked out just fine (n14 + n15)

As a brainstorm and without diving too much into it, I wonder if estimations assume pool hashrate as total network hashrate. At NFactor 14,15 it just so happened that coinmine dominated total network hashrate, so a mistake like that would have had negligible impacts.

I think it is time the pools post in hash/s vs khash/s. I contacted yac.m-s-t.org about it a while back, but it will be worth doing again, yac.coinmine.pl especially.

In other news, YAC is in THIRD place in voting at www.crypto-trade.com/voting. If nothing changes, YAC will be listed on that exchange (including a USD/YAC pair) in 6 weeks! It would be great to see it not be leap-frogged by another coin, but I guarantee it will require more votes. I'd love to see it happen organically without any more BTC donated to get YAC on that exchange.

Good news! Yac/Usd is cool, hopefully they don't kill crypto-trade this time.

[Qxw]

yep just switched to http://yac.m-s-t.org and everything works out fine ...


https://www2.coinmine.pl/yac has a share count issue !!!!

My ping time to coinmine.pl is short (ok)
to m-s-t.org I have nearly 200ms ping. (too long)

[senj]

I set up my own pool after latest N change and my coin generation doubled after that.
However I have issues with my network that only affect my gpu miner.

I get at least 10% of these errors with yaccminer (gpu):
Rejected 810ea74e Diff 1/0 GPU 0  (job not found)

Every couple of minutes I get "Stratum connection to pool 0 interrupted".

No errors from cpu miner working on the same machine, connecting to same port with same pool difficulty.
Nevertheless yacminer's sucessfull submission share rate is almost double than my cpus (so is it's hash rate).

But my gpu miner consistently!!! (over a week now) finds only half (or even less) of blocks of what my cpu miner does inspite of it's doubled hash (and sucessfull share submission) rate. Nobody can convince me this is by chance - something is favoring cpu mining. Favoring big time.

My friend also mines on this pool with all cpu miners - he is also finding far more (2x-3x) blocks with his miners than I do with my gpu miner and he's comulative hashing rate isn't much higher than my gpu's. Besides more of my gpu mined blocks get orphaned (50% at least).

I am sure coinmine.pl is loosing at least half of what it could produce with that hash rate. I don't know why.

Also I think CPU miners on that pool are loosing even more: Pool difficulty was probably not ment to go that far below 1 than it was "pushed" with N factor increments. I tried setting my pool difficulty to 0.001, 0.000001, even 1e-15 and dual core athlon 64bit for example still needed hours to hit a share. That means pools don't know exactly "when" cpu miners were working because their share submissions are so rare. And gpu miners submit far more shares and rarely find a block - at least that is what I am observing.

So there are many issues combined here, but I think current block rewards this high are due problems that GPU miners are observing. Pools also have issues with setting/calculating fair share difficulty. Perhaps miner software also have issues with recognizing difficulty (difficulty number get's rounded and numeric precision isn't accounted properly?).

I don't have time to check all the code now, my own priority is to fix my network issues. And after that gpu miner's picture could improve a bit.
But I can also confirm that my friend who is now mining on my pool with cpu miners gets 2-3x what he got on the public pool before.

I mean together we have less than 1kh and we hit 5-10 blocks per day. Plus orphans.
In a way that is encouraging, because I think we all could be mining on "private" pools until reward get's below 40 or even 25.

I will be glad to hear if someone has any recommendations for my gpu miner's problems (yacminer --scrypt-chacha --lookup-gap 6 -R 1280).

[Thirtybird]

Only the first 6 miners at https://www2.coinmine.pl/yac show a hashrate above 1 khash,
I do believe many miners there share the same issues as I do at that pool.


It seems to me that the pool doesn't count every share.

I'll shed some light on this - For some reason feelep lowered the share difficulty to 0.25 (a non-integer).  From my memory, the mining software doesn't even validate any share unless its difficulty is 1 or higher - and it's all integer based, so it would be a major undertaking to make it work for his pool.  So, you are definitely losing out compared to people who can submit shares lower than 1 (maybe cudaminer or ccminer can?).  I spent an afternoon looking through the yacminer code for where it made that determination to only validated shares of diff 1 or higher, but never found it (it may have been in the CPU miner software).  That's when I decided to solo mine, and started netting almost double compared to the pool.

[feeleep]

Only the first 6 miners at https://www2.coinmine.pl/yac show a hashrate above 1 khash,
I do believe many miners there share the same issues as I do at that pool.


It seems to me that the pool doesn't count every share.

I'll shed some light on this - For some reason feelep lowered the share difficulty to 0.25 (a non-integer).  From my memory, the mining software doesn't even validate any share unless its difficulty is 1 or higher - and it's all integer based, so it would be a major undertaking to make it work for his pool.  So, you are definitely losing out compared to people who can submit shares lower than 1 (maybe cudaminer or ccminer can?).  I spent an afternoon looking through the yacminer code for where it made that determination to only validated shares of diff 1 or higher, but never found it (it may have been in the CPU miner software).  That's when I decided to solo mine, and started netting almost double compared to the pool.

Hi - sorry - I could not follow this thread. I was not aware of miner's limitation to diff 1 so I will change stratum settings right now.

feeleep

EDIT: diff changed to 1

[bitcodo]

Now it works great. My earnings from last blocks are up for x2 or x3 from previous one.
The problem started 1 month ago, but  solution was obviously fast and simple. Maybe next time   

[Qxw]

Now it works great.

Great?  My earnings drops dramatically. 50% drop or even more. Without any markable change in difficulty what have been around 0.0012. Something is now very odd if compare time before this change. Also now there is lot of more times when my workers drops offline. Previously my 2 rigs (GPU rigs) never show in pool "my workers" that they are off. Now many times. Now my other miners, (i7 cpu's) are mostly  "off".   Previously system (pool) works just ok. Now it is so terrible that perhaps need try solo. I do not accept over 50% drop without any markable change in Network and my hashrate. Rule no 1. is that do not "repair" and "adjust" well working system.

Please change pool hashrate display to display hashes/s instead of khashes/s.  khash/s display is too rough for N16.
With this peoples can check what miner display and pool thinks about hashrate. If there is too big difference then people need find problem in his own end.

I can not yet proof it but now it really looks like that pool do not count every accepted shares. (if I look my miners displays and pool dashboard "valid" count. They do not match and after this change situation looks like  more bad. (lest in my case)

[alenevaa]

Great?  My earnings drops dramatically. 50% drop or even more. Without any markable change in difficulty what have been around 0.0012. Something is now very odd if compare time before this change. Also now there is lot of more times when my workers drops offline. Previously my 2 rigs (GPU rigs) never show in pool "my workers" that they are off. Now many times. Now my other miners, (i7 cpu's) are mostly  "off".   Previously system (pool) works just ok. Now it is so terrible that perhaps need try solo. I do not accept over 50% drop without any markable change in Network and my hashrate. Rule no 1. is that do not "repair" and "adjust" well working system.

Qxw, you shouldn't cry so much! Because with your nvidia miner you had constantly get two times more yacs since 0.25 difficulty. So you owe all the amd gpu's miners (such as Grim) literally! 

[Qxw]

Great?  My earnings drops dramatically. 50% drop or even more. Without any markable change in difficulty what have been around 0.0012. Something is now very odd if compare time before this change. Also now there is lot of more times when my workers drops offline. Previously my 2 rigs (GPU rigs) never show in pool "my workers" that they are off. Now many times. Now my other miners, (i7 cpu's) are mostly  "off".   Previously system (pool) works just ok. Now it is so terrible that perhaps need try solo. I do not accept over 50% drop without any markable change in Network and my hashrate. Rule no 1. is that do not "repair" and "adjust" well working system.

Qxw, you shouldn't cry so much! Because with your nvidia miner you had constantly get two times more yacs since 0.25 difficulty. So you owe all the amd gpu's miners (such as Grim) literally!  

Do you mean that now I should turn on my amd rigs for YAC. And use nvidia's for other things...  

Yes, these nvidia rigs can use also nicely with N14 chacha. 4x750Ti give around 12-13kh/s and 4x R9 "toxic" 280x  house heating rigs around 16.5-17.5kh/s (gross)  But, if need pay electric and if heat goes to waste, these nvidia beats these amd radeons clearly. With N16 chacha, nvidia 750Ti even more better than R9 280x what start really get hick-up with N16 chacha.

Previously I did some exercise with my R7 240 4Gb test card, ands result was poor and then also I did not have time to do more deep testings. Also with R9 280x I give hands up with N16 chacha.
 
Perhaps after this change I can try agen if result is better.

btw, also I have noted this situation time ago but no one react to this what is really going on.

What is going on in  http://yac.coinmine.pl

----------------------------------   
..........Own...............Pool
Valid .......4.................58
Invalid......0................3,222
Efficiency..100.00%......1.76%
----------------------------------

This ihave been typical situation after change to N16

Perhaps some miners have forget change miners settings.
Nearly all (~98%) hashing power go to garbage.

Edit|Add:

Previously I did some exercise with my R7 240 4Gb test card, ands result was poor and then also I did not have time to do more deep testings. Also with R9 280x I give hands up with N16 chacha.
 
Perhaps after this change I can try agen if result is better.

After pool diff set to 1  (previously 0.25)  I have tested agen my R7 240 4Gb with yacminer and YAC. Result: without any problems easy to 350h/s 340hash/s (gross) (Engine 1140 1100, Mem 1000). It can more but stability is not perfect and start generate HW'errs or just crash randomly.
Now yacminer also show accepteds ok.


Edit Add 2:

Are there some kind of bug in yacminer or is it only that I do not understand something.
If set yacminer for debug display, it display N17 for every works. (but top part of display of course show N16 as it is)

[mig6r]

Hello,
I do not understand why I am unable to use yacminer.
Even my old .Bat do not want to work.
I use this bat:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
yacminer --scrypt-chacha -d 0 -o stratum+tcp://yac.m-s-t.org:3333 -u xx -p xx -R 2560 -g 1  --buffer-size 2560 --lookup-gap 8 --worksize 256 --gpu-engine 1020 --gpu-memclock 1500 --temp-cutoff 95 --gpu-fan 0-100 --auto-gpu --temp-target 85 --temp-overheat 95

5*280x
1*7870
8Gb Memory

anyone have an idea?
Thanks

Edit : ok it's works without "--buffer-size" but 450h for a 280x.
How to choose my buffer size ?
Thanks

[Qxw]

Hello,
I do not understand why I am unable to use yacminer.
/

 -R 2560 -g 1  --buffer-size 2560 --lookup-gap 8

5*280x
1*7870
8Gb Memory

[/quote]

YACoin N=16 today!

you overrun your GPU's memory with these settings! (R= far too high)
Perhaps these settings work earlier with lower N value but really not with N16.
Look N tables, it tell how much memory N16 need for one calc then you know what is perhaps ok R with lookupgap 8 and your buffer size (your buffer size is ok for 3Gb GPU's).

This time N=16.  (N14 need 4Mb, N15 need 8Mb and N16 need 16Mb. Next step, N17 need 32Mb etc...

(if stay with -g 1)
Lookup gap 8 means that this 16Mb (or what ever it is with current N value) is divided to 8 "gaps". So, one is 2Mb.
Memory (buffer) 2560Mb can take 1280  2Mb "gaps" at once.  So  -R max is 1280.

then this "hassle" (--temp-cutoff 95 --gpu-fan 0-100 --auto-gpu --temp-target 85 --temp-overheat 95 ) any idea for these paramaters? Why run so hot, and why --auto-gpu?

If I set these for my R9 280x rigs (Sapphire Toxic R9 280x) I will set --temp-cutoff 90 --auto-fan --auto-gpu --temp-target 70 --temp-overheat 80 --temp-hysteresis 2

I do not understand what for you use --auto-gpu ?? it is for  autoadjust GPU clocks (for temperature),   really strange in this situation. (perhaps mistake)

And if really need some details. I'm not GPU specialist! So these are only some winks for starting finer adjusting.




Also this may give some help http://www.ultracoin.net/configgen_raw.html
(remember select N16)

Btw...how fast hashing you expect with R9 280x with N16?