[ANN][YAC] YACoin ongoing development

[Frijj36]

Supply should be around 20 million, site screwed up. YAC is in it's proper position though.

[TsuyokuNaritai]

why is this coin #1 on coinmarketcap? I call shennanigans!!! DAT VOLUME LOL

Apparently explorer.yacoin.org is now listing the coin supply in satoshis. Totally an honest mistake with the API server code and not in any way a dastardly scheme to gain attention for YACoin to boost the price...

[STT]

23 trillion, even doge is jealous of your spammy coin :p   1 coin for every dollar of national debt, surely a successor to the dollar

[aso118]

I've been meaning to do some extensive testing in the power-efficiency arena. Rough calculation, it seems I am costing myself $0.25 per day on one rig by using this PSU. But at this point, 750B might be an overkill for me. I'm wondering if crappy riser cables also play a factor...

Not likely the riser cables, just efficiency of the power supply likely.  My other machine is on a Supernova 650 Gold - I bought nice re-usable components for the things that have a life after crypto mining...

Again, we can't predict exactly where the difficulty ends up right? It could be more or less when it settles. You assume the exact same miners from prior to the NFactor change. I say more, new miners will jump on board--optimism.

I think you're overly optimistic - with the way the hashrate fell for all cards that aren't 4GB cards, I would make you a gentlemans wager that we're going to see it below 50% what it was a week ago (1.08k per the mining software, 0.0164 difficulty).  If we settle above 500/0.0763 I would be shocked.  My best cards dropped 60%, my worst 70% and   I'm going to hypothesize that all CPU's dropped by 50%.  So, unless, as you say, there is an influx of new miners, a 60%+ drop in difficulty should not be a surprise.

I think majority of the hashrate was coming from GPUs as well.  I'm a CPU miner and I can confirm that I had a drop of 45-55% in all of my hashrates with the last n-increase.  I too think we will see a very low (if not a record low) difficulty once it is stabilized. With all of the new coin 'attempts' I think people are going to start valuing the stability, and ASIC resistant properties for YAC.  With the larger block reward (from the lower difficulty) I think we will see new miners. 

[ivanlabrie]

Price already increased 1.32x...go yac! :p

[aso118]

Price already increased 1.32x...go yac! :p

It just got traded all of the way up to 3205 satoshi on Cryptsy - looks like someone bought a few hundred thousand YACs.

[Poena]

I tried YAC tonight with my 750ti. Without success. Anyone would like to share their .bat file with me.

[ivanlabrie]

Nice!

Go yac heck yeah 

[GarlukKY]

I tried YAC tonight with my 750ti. Without success. Anyone would like to share their .bat file with me.

+1 

[Poena]

I'll probably stay on JPC for a while, but I'm getting ready for the post-JPC mining. I was on YAC for a while before JPC always been very steady,...

[Thirtybird]

Again, we can't predict exactly where the difficulty ends up right? It could be more or less when it settles. You assume the exact same miners from prior to the NFactor change. I say more, new miners will jump on board--optimism.

I think you're overly optimistic - with the way the hashrate fell for all cards that aren't 4GB cards, I would make you a gentlemans wager that we're going to see it below 50% what it was a week ago (1.08k per the mining software, 0.0164 difficulty).  If we settle above 500/0.0763 I would be shocked.  My best cards dropped 60%, my worst 70% and   I'm going to hypothesize that all CPU's dropped by 50%.  So, unless, as you say, there is an influx of new miners, a 60%+ drop in difficulty should not be a surprise.

If your assumptions pan out, the price will have to drop significantly from where it is now or the profitably per R7 240 4GB (and lots of CPUs btw) will be pretty significant. All likely scenarios seem pretty good for me, so I'll bet you 1000 YAC that now until Sunday (midnight EDT) difficulty never drops below 500...

Accepted.  I honestly think it will go my way, but it's not a sure thing.

[ivanlabrie]

I'll probably stay on JPC for a while, but I'm getting ready for the post-JPC mining. I was on YAC for a while before JPC always been very steady,...

Yeah I amassed a decent bag o' coins with a 750 ti rig...and my own r7 240 2gb cards (which are kinda useless now).

[tc61]

I have been trying to get my 750ti to run on any yacoin pool without success , can anyone help out?

[Beave162]

So... I don't have a 750ti, but I believe these are the settings to get over 1 khash/s: --algo=scrypt-jane:YAC -l t4x16 -C 2 -b 4096 -m 1 -i 0 -L 4

Let me know how that goes.

[tc61]

It does not like that algo but I tried the auto, same thing just keeps saying Stratum detected new block , but never starts hashing...

[Poena]

So... I don't have a 750ti, but I believe these are the settings to get over 1 khash/s: --algo=scrypt-jane:YAC -l t4x16 -C 2 -b 4096 -m 1 -i 0 -L 4

Let me know how that goes.

Seem to work perfectly. Getting an average of 1.20 over all my 5 cards with a little bit of OC.

Thanks a lot!  

[tc61]

So... I don't have a 750ti, but I believe these are the settings to get over 1 khash/s: --algo=scrypt-jane:YAC -l t4x16 -C 2 -b 4096 -m 1 -i 0 -L 4

Let me know how that goes.

Seem to work perfectly. Getting an average of 1.15 over all my 5 cards with a little bit of OC.

Thanks a lot! 

hi, can you give me you exact bat file, I can t get mine to work, also what version of cudaminer are you using 2-28?

[Poena]

Code:

cudaminer.exe --algo=scrypt-jane:YAC -l t4x16 -C 2 -b 4096 -m 1 -i 0 -L 4 -o stratum+tcp://yac.coinmine.pl:9088 -u Worker.Name -p x

It's my .bat file. Using 02-28 (x64 version).

[tc61]

Code:

cudaminer.exe --algo=scrypt-jane:YAC -l t4x16 -C 2 -b 4096 -m 1 -i 0 -L 4 -o stratum+tcp://yac.coinmine.pl:9088 -u Worker.Name -p x

It's my .bat file. Using 02-28 (x64 version).

thx I think my cuda dir was screwed, I red/l and now it works, one more question, when you run it does it slow your machine to a crawl?

[tc61]

Anyone here running a 750ti? I just wanted to check if 1.23Kh is about right. I read through some older forums and people were getting 3.5kh from the 750ti, but I dont know if that is valid now.

thx