Kgonla
Newbie
Offline
Activity: 129
Merit: 0
|
|
March 17, 2019, 08:57:12 PM |
|
Got cash for someone willing to help out setting up 4 moonlander 2's and 12 gridseed on raspberry pi with eye boot 49 port hub. I can get one moonlander in bfg 5.4.2 and 12 gridseed orbs in 5.5.0. But I want all devices in 5.5.0 if possible. When I start the moonlanders in 5.4.2 all 4 run/hash, Then 3 shut down. Just stop hashing. Been reading for 4 days till 12pm. lol Hair thinning. Thanks in advance. https://github.com/jstefanop/bfgminer/tree/futurebit2_driver appears to have bfgminer 5.5.0 with moonlander 2 support based on NEWS file content. It just hasn't been released so there aren't any pre-compiled binaries available. But last entry from Stefano for bfgminer moonlander is one year old, if it have not been compiled yet I don't think it would be
|
|
|
|
whiteogre
Jr. Member
Offline
Activity: 61
Merit: 4
|
|
March 17, 2019, 09:55:02 PM |
|
Got cash for someone willing to help out setting up 4 moonlander 2's and 12 gridseed on raspberry pi with eye boot 49 port hub. I can get one moonlander in bfg 5.4.2 and 12 gridseed orbs in 5.5.0. But I want all devices in 5.5.0 if possible. When I start the moonlanders in 5.4.2 all 4 run/hash, Then 3 shut down. Just stop hashing. Been reading for 4 days till 12pm. lol Hair thinning. Thanks in advance. https://github.com/jstefanop/bfgminer/tree/futurebit2_driver appears to have bfgminer 5.5.0 with moonlander 2 support based on NEWS file content. It just hasn't been released so there aren't any pre-compiled binaries available. But last entry from Stefano for bfgminer moonlander is one year old, if it have not been compiled yet I don't think it would be Well, that's easy to test if it can be compiled: $ sudo apt-get install git build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev libjansson-dev uthash-dev libncursesw5-dev libudev-dev libusb-1.0-0-dev ... $ git clone https://github.com/jstefanop/bfgminer -b futurebit2_driver bfgminer_futurebit2 ... $ cd bfgminer_futurebit2 $ ./autogen.sh (some complaining about version file) $ ./configure --disable-other-drivers --disable-sha256d --enable-scrypt --enable-futurebit ... ------------------------------------------------------------------------ bfgminer 5.5.0 configuration options summary ------------------------------------------------------------------------
CFLAGS...............: -D_GNU_SOURCE -D_DEFAULT_SOURCE -I/usr/include/ncursesw -pthread -g -O2 -I/usr/include/libusb-1.0 -pthread -I/root/bfgminer_futurebit2/libbase58 -I/root/bfgminer_futurebit2/libblkmaker LDFLAGS..............: -pthread -lpthread -lcurl -ljansson -lncursesw -ltinfo -lm -ludev -lusb-1.0 -L/root/bfgminer_futurebit2/libbase58/.libs -Wl,-rpath,\$$ORIGIN/libbase58/.libs,-zorigin -lbase58 -L/root/bfgminer_futurebit2/libblkmaker/.libs -Wl,-rpath,\$$ORIGIN/libblkmaker/.libs,-zorigin -lblkmaker_jansson-0.1 -lblkmaker-0.1 Installation.prefix..: /usr/local
Enabled..Lowlevel....: usb vcom Disabled.Lowlevel....: ftdi hid mswin pci spi Enabled..Drivers.....: futurebit Disabled.Drivers.....: alchemist antminer avalon avalonmm bfsb bfx bifury bigpic bitforce bitfury bitmain cairnsmore cointerra compac cpu drillbit dualminer erupter gridseed hashbuster hashbusterusb hashfast icarus jingtian klondike knc kncasic littlefury metabank minergate minion modminer nanofury opencl proxy rockminer titan twinfury x6500 zeusminer ztex Enabled..Algorithms..: scrypt Disabled.Algorithms..: Keccak SHA256d Enabled..Options.....: ncursesw5 Disabled.Options.....: $ make -j4 ... $ ./bfgminer --version bfgminer 5.2.0-243-gbbc9596a Lowlevel: usb vcom Drivers: futurebit Algorithms: scrypt Options: ncursesw5
So the final version in the bfgminer output doesn't match the version show after ./configure (which appears to be the correct one) due to some issue on how autogen.sh tries to guess the version script from a git cloned workspace. Otherwise, that result in a working bfgminer binary which is more recent than the latest released Moonlander 2 version and also contains the last changes made to that branch.
|
|
|
|
juggalonoke
Newbie
Offline
Activity: 17
Merit: 0
|
|
March 20, 2019, 04:53:59 AM |
|
can someone please help me with this issue i still dont know what is making it happen and ive tried everything i can think of.
|
|
|
|
ejonathonw
Jr. Member
Offline
Activity: 51
Merit: 1
|
|
March 20, 2019, 11:01:52 AM |
|
What does your command line look like?
|
|
|
|
juggalonoke
Newbie
Offline
Activity: 17
Merit: 0
|
|
March 20, 2019, 04:43:58 PM |
|
What does your command line look like?
still newer to all this what do you need to see?
|
|
|
|
ejonathonw
Jr. Member
Offline
Activity: 51
Merit: 1
|
|
March 20, 2019, 05:24:45 PM Last edit: March 20, 2019, 05:36:05 PM by ejonathonw |
|
What does your command line look like?
still newer to all this what do you need to see? Did you create a .bat file or edit the config file? Also what kind of power supply are you using?
|
|
|
|
juggalonoke
Newbie
Offline
Activity: 17
Merit: 0
|
|
March 20, 2019, 05:39:44 PM |
|
What does your command line look like?
still newer to all this what do you need to see? Did you create a .bat file or edit the config file? edited the Start_Moonlander2.bat file with bfgminer.exe --scrypt -o stratum+tcp://emc2.suprnova.cc:3366 -u juggalonoke.juggalonoke -p 1,d=1 -S MLD:all --set MLD:clock=600 pause no matter what coin in the scrypt algo i mine my miner just stops and shows what my screen shots show
|
|
|
|
ejonathonw
Jr. Member
Offline
Activity: 51
Merit: 1
|
|
March 20, 2019, 05:43:47 PM |
|
What does your command line look like?
still newer to all this what do you need to see? Did you create a .bat file or edit the config file? edited the Start_Moonlander2.bat file with bfgminer.exe --scrypt -o stratum+tcp://emc2.suprnova.cc:3366 -u juggalonoke.juggalonoke -p 1,d=1 -S MLD:all --set MLD:clock=600 pause no matter what coin in the scrypt algo i mine my miner just stops and shows what my screen shots show Have you tried setting the diff to something higher?
|
|
|
|
juggalonoke
Newbie
Offline
Activity: 17
Merit: 0
|
|
March 20, 2019, 06:10:12 PM |
|
What does your command line look like?
still newer to all this what do you need to see? Did you create a .bat file or edit the config file? edited the Start_Moonlander2.bat file with bfgminer.exe --scrypt -o stratum+tcp://emc2.suprnova.cc:3366 -u juggalonoke.juggalonoke -p 1,d=1 -S MLD:all --set MLD:clock=600 pause no matter what coin in the scrypt algo i mine my miner just stops and shows what my screen shots show Have you tried setting the diff to something higher? yes i have. even with default values set up and mining to the recomended litecoinpool.org my lander will only mine for a most a few minutes before the second screen shot is what i see and i have to full close BFGminer and unplug the moonlander and restart BFGminer
|
|
|
|
ejonathonw
Jr. Member
Offline
Activity: 51
Merit: 1
|
|
March 20, 2019, 06:13:03 PM |
|
What does your command line look like?
still newer to all this what do you need to see? Did you create a .bat file or edit the config file? edited the Start_Moonlander2.bat file with bfgminer.exe --scrypt -o stratum+tcp://emc2.suprnova.cc:3366 -u juggalonoke.juggalonoke -p 1,d=1 -S MLD:all --set MLD:clock=600 pause no matter what coin in the scrypt algo i mine my miner just stops and shows what my screen shots show Have you tried setting the diff to something higher? yes i have. even with default values set up and mining to the recomended litecoinpool.org my lander will only mine for a most a few minutes before the second screen shot is what i see and i have to full close BFGminer and unplug the moonlander and restart BFGminer What kind of power supply are you working with?
|
|
|
|
juggalonoke
Newbie
Offline
Activity: 17
Merit: 0
|
|
March 20, 2019, 06:28:40 PM |
|
What does your command line look like?
still newer to all this what do you need to see? Did you create a .bat file or edit the config file? edited the Start_Moonlander2.bat file with bfgminer.exe --scrypt -o stratum+tcp://emc2.suprnova.cc:3366 -u juggalonoke.juggalonoke -p 1,d=1 -S MLD:all --set MLD:clock=600 pause no matter what coin in the scrypt algo i mine my miner just stops and shows what my screen shots show Have you tried setting the diff to something higher? yes i have. even with default values set up and mining to the recomended litecoinpool.org my lander will only mine for a most a few minutes before the second screen shot is what i see and i have to full close BFGminer and unplug the moonlander and restart BFGminer What kind of power supply are you working with? usb 3.0 thats built into my windows based tower
|
|
|
|
ejonathonw
Jr. Member
Offline
Activity: 51
Merit: 1
|
|
March 20, 2019, 06:37:44 PM |
|
What does your command line look like?
still newer to all this what do you need to see? Did you create a .bat file or edit the config file? edited the Start_Moonlander2.bat file with bfgminer.exe --scrypt -o stratum+tcp://emc2.suprnova.cc:3366 -u juggalonoke.juggalonoke -p 1,d=1 -S MLD:all --set MLD:clock=600 pause no matter what coin in the scrypt algo i mine my miner just stops and shows what my screen shots show Have you tried setting the diff to something higher? yes i have. even with default values set up and mining to the recomended litecoinpool.org my lander will only mine for a most a few minutes before the second screen shot is what i see and i have to full close BFGminer and unplug the moonlander and restart BFGminer What kind of power supply are you working with? usb 3.0 thats built into my windows based tower Have you checked to be sure that the device manager isn't shutting the usb off?
|
|
|
|
juggalonoke
Newbie
Offline
Activity: 17
Merit: 0
|
|
March 20, 2019, 06:48:46 PM |
|
What does your command line look like?
still newer to all this what do you need to see? Did you create a .bat file or edit the config file? edited the Start_Moonlander2.bat file with bfgminer.exe --scrypt -o stratum+tcp://emc2.suprnova.cc:3366 -u juggalonoke.juggalonoke -p 1,d=1 -S MLD:all --set MLD:clock=600 pause no matter what coin in the scrypt algo i mine my miner just stops and shows what my screen shots show Have you tried setting the diff to something higher? yes i have. even with default values set up and mining to the recomended litecoinpool.org my lander will only mine for a most a few minutes before the second screen shot is what i see and i have to full close BFGminer and unplug the moonlander and restart BFGminer What kind of power supply are you working with? usb 3.0 thats built into my windows based tower Have you checked to be sure that the device manager isn't shutting the usb off? how?
|
|
|
|
ejonathonw
Jr. Member
Offline
Activity: 51
Merit: 1
|
|
March 20, 2019, 06:57:06 PM |
|
What does your command line look like?
still newer to all this what do you need to see? Did you create a .bat file or edit the config file? edited the Start_Moonlander2.bat file with bfgminer.exe --scrypt -o stratum+tcp://emc2.suprnova.cc:3366 -u juggalonoke.juggalonoke -p 1,d=1 -S MLD:all --set MLD:clock=600 pause no matter what coin in the scrypt algo i mine my miner just stops and shows what my screen shots show Have you tried setting the diff to something higher? yes i have. even with default values set up and mining to the recomended litecoinpool.org my lander will only mine for a most a few minutes before the second screen shot is what i see and i have to full close BFGminer and unplug the moonlander and restart BFGminer What kind of power supply are you working with? usb 3.0 thats built into my windows based tower Have you checked to be sure that the device manager isn't shutting the usb off? how? Open your device manager, right click on the com your usb is on, properties. Check under the power managment tab. There is an option in there
|
|
|
|
juggalonoke
Newbie
Offline
Activity: 17
Merit: 0
|
|
March 20, 2019, 08:39:43 PM |
|
What does your command line look like?
still newer to all this what do you need to see? Did you create a .bat file or edit the config file? edited the Start_Moonlander2.bat file with bfgminer.exe --scrypt -o stratum+tcp://emc2.suprnova.cc:3366 -u juggalonoke.juggalonoke -p 1,d=1 -S MLD:all --set MLD:clock=600 pause no matter what coin in the scrypt algo i mine my miner just stops and shows what my screen shots show Have you tried setting the diff to something higher? yes i have. even with default values set up and mining to the recomended litecoinpool.org my lander will only mine for a most a few minutes before the second screen shot is what i see and i have to full close BFGminer and unplug the moonlander and restart BFGminer What kind of power supply are you working with? usb 3.0 thats built into my windows based tower Have you checked to be sure that the device manager isn't shutting the usb off? how? Open your device manager, right click on the com your usb is on, properties. Check under the power managment tab. There is an option in there this did not work its still doing the same thing.
|
|
|
|
ejonathonw
Jr. Member
Offline
Activity: 51
Merit: 1
|
|
March 20, 2019, 08:46:27 PM |
|
What does your command line look like?
still newer to all this what do you need to see? Did you create a .bat file or edit the config file? edited the Start_Moonlander2.bat file with bfgminer.exe --scrypt -o stratum+tcp://emc2.suprnova.cc:3366 -u juggalonoke.juggalonoke -p 1,d=1 -S MLD:all --set MLD:clock=600 pause no matter what coin in the scrypt algo i mine my miner just stops and shows what my screen shots show Have you tried setting the diff to something higher? yes i have. even with default values set up and mining to the recomended litecoinpool.org my lander will only mine for a most a few minutes before the second screen shot is what i see and i have to full close BFGminer and unplug the moonlander and restart BFGminer What kind of power supply are you working with? usb 3.0 thats built into my windows based tower Have you checked to be sure that the device manager isn't shutting the usb off? how? Open your device manager, right click on the com your usb is on, properties. Check under the power managment tab. There is an option in there this did not work its still doing the same thing. Darn, any chance you have a usb Volt meter, so you can verify your port is putting out enough? Or try running the Moonlander on like the 350mhz, or whatever the lowest mhz setting is.
|
|
|
|
juggalonoke
Newbie
Offline
Activity: 17
Merit: 0
|
|
March 20, 2019, 09:15:47 PM |
|
What does your command line look like?
still newer to all this what do you need to see? Did you create a .bat file or edit the config file? edited the Start_Moonlander2.bat file with bfgminer.exe --scrypt -o stratum+tcp://emc2.suprnova.cc:3366 -u juggalonoke.juggalonoke -p 1,d=1 -S MLD:all --set MLD:clock=600 pause no matter what coin in the scrypt algo i mine my miner just stops and shows what my screen shots show Have you tried setting the diff to something higher? yes i have. even with default values set up and mining to the recomended litecoinpool.org my lander will only mine for a most a few minutes before the second screen shot is what i see and i have to full close BFGminer and unplug the moonlander and restart BFGminer What kind of power supply are you working with? usb 3.0 thats built into my windows based tower Have you checked to be sure that the device manager isn't shutting the usb off? how? Open your device manager, right click on the com your usb is on, properties. Check under the power managment tab. There is an option in there this did not work its still doing the same thing. Darn, any chance you have a usb Volt meter, so you can verify your port is putting out enough? Or try running the Moonlander on like the 350mhz, or whatever the lowest mhz setting is. no i dont have one at all.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2155
Merit: 1400
|
|
March 20, 2019, 09:39:08 PM |
|
Yea thats definitely an issue of not enough power on the port. Like others have said run it on the lowest frequency and see if it runs stable.
|
|
|
|
juggalonoke
Newbie
Offline
Activity: 17
Merit: 0
|
|
March 20, 2019, 11:39:09 PM |
|
Yea thats definitely an issue of not enough power on the port. Like others have said run it on the lowest frequency and see if it runs stable.
is there anything else it could be because im starting to think its not the moonlander but my PC and not the USB either because i have a CPU miner that i use for Magi and it is stopping on its own as well it looks like.
|
|
|
|
ejonathonw
Jr. Member
Offline
Activity: 51
Merit: 1
|
|
March 21, 2019, 12:40:18 AM Last edit: March 21, 2019, 12:56:05 AM by ejonathonw |
|
Yea thats definitely an issue of not enough power on the port. Like others have said run it on the lowest frequency and see if it runs stable.
is there anything else it could be because im starting to think its not the moonlander but my PC and not the USB either because i have a CPU miner that i use for Magi and it is stopping on its own as well it looks like. change this setting (--set MLD:clock=600) to (--set MLD:clock=384) and see what happens. by the by, anyone got an idea what the AS:-4 is all about? never noticed it be - before
|
|
|
|
|