|
Toughit
|
 |
February 12, 2021, 11:21:06 PM |
|
During the DevFee ‘storm’ my effective hash rate dropped from over 30 to 25. It is reflected in the pool. The miner showed 29.2 the entire time,
|
|
|
|
|
numbsoul
Newbie
 Offline
Activity: 3
Merit: 0
|
|
February 13, 2021, 02:34:25 AM |
|
Thank you... i see here you are mining on ethermine? how to change it to binance pool and i can view its statistic in binance site? #
# PhoenixMiner configuration file
#
#
-rxboost 0,81,81,81,81,81,81,25
-gt 15,38,38,41,43,42,42,52
-rmode 1
-tt 50,60,60,60,60,60,60,48
-fanmin 30
-fanmax 100
-eres 100
-proto 3
-cdm 2
-hstats 2
-astats 1
-amd
-acm
-wdog 1
-gpow 100,100,100,100,100,100,100,100
-minRigSpeed 265
-coin eth
-clf 1
-clNew 1
-clKernel 1
-prate 0.135
-gpus 1,2,3,4,5,6,7,8
-cclock 1195,1190,1190,1200,1200,1200,1200,1200
-cvddc 793,853,853,855,850,850,850,750
-mclock 2110,2090,2090,2090,2113,2113,2113,1825
-mvddc 850,860,860,860,853,853,853,850
-pool ssl://eu1.ethermine.org:5555
-pool2 ssl://us1.ethermine.org:5555
#GRAVIEX-WALLET
#-wal 0x7**********************************.32*******
#BINANCE-WALLET
-wal 0x7**********************************.32*******
-mt 0,0,0,0,0,0,0,0,1
#-pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444
#-wal YourEthWalletAddress.WorkerName
#-proto 3
#-cdm 2
Eth: New job #b575c3a7 from ssl://eu1.ethermine.org:5555; diff: 4000MH
GPU1: 50C 43% 167W, GPU2: 60C 39% 88W, GPU3: 60C 40% 95W, GPU4: 57C 34% 86W, GPU5: 59C 33% 83W, GPU6: 60C 30% 82W, GPU7: 58C 30% 83W, GPU8: 47C 28% 90W
GPU1: cclock 1176 MHz, cvddc 793 mV, mclock 2098 MHz, Tj 55C
GPU2: cclock 1190 MHz, cvddc 862 mV, mclock 2090 MHz
GPU3: cclock 1190 MHz, cvddc 862 mV, mclock 2090 MHz
GPU4: cclock 1200 MHz, cvddc 862 mV, mclock 2090 MHz
GPU5: cclock 1200 MHz, cvddc 856 mV, mclock 2110 MHz
GPU6: cclock 1200 MHz, cvddc 856 mV, mclock 2113 MHz
GPU7: cclock 1200 MHz, cvddc 856 mV, mclock 2110 MHz
GPU8: cclock 1159 MHz, cvddc 750 mV, mclock 1816 MHz, mvddc 850 mV, Tj 53C, Tmem 80C
GPUs power: 773.1 W; cost: 2.50 USD/day
Eth speed: 305.953 MH/s, shares: 1517/0/2, time: 5:28
GPUs: 1: 59.841 MH/s (312) 2: 32.312 MH/s (160) 3: 32.313 MH/s (152/1) 4: 32.281 MH/s (151) 5: 32.489 MH/s (175/1) 6: 32.489 MH/s (160) 7: 32.488 MH/s (163) 8: 51.741 MH/s (244)
|
|
|
|
|
coinhunter142
Newbie
Offline
Activity: 23
Merit: 0
|
|
February 13, 2021, 03:32:01 AM |
|
RX 6800 Phoenixminer mining renders Windows 10 unresponsive?!?
I have just gotten a new XFX 6800 card and wanted to put it to good use, so I downvolted/reduced GPU freq/boosted the ram freq and I hit 63 MH (oh my, for a card like this #eyeroll) right off the bat, but as soon as the card starts mining, Windows become quite unresponsive (dragging a window causes a 1s freeze, etc.) I used to mine with my old RX570 and using the exact same machine + the exact same (three) monitors, the miner didn't slow down Windows AT ALL. But with 6800, mining renders the machine basically useless for normal work, which leaves me completely confused about what could cause such a difference in Windows responsiveness (with that much better a graphic card) and more importantly, how can I fix this? Thank yo in advance
|
|
|
|
|
leojoyms
Newbie
Offline
Activity: 54
Merit: 0
|
|
February 13, 2021, 03:42:10 AM |
|
RX 6800 Phoenixminer mining renders Windows 10 unresponsive?!?
I have just gotten a new XFX 6800 card and wanted to put it to good use, so I downvolted/reduced GPU freq/boosted the ram freq and I hit 63 MH (oh my, for a card like this #eyeroll) right off the bat, but as soon as the card starts mining, Windows become quite unresponsive (dragging a window causes a 1s freeze, etc.) I used to mine with my old RX570 and using the exact same machine + the exact same (three) monitors, the miner didn't slow down Windows AT ALL. But with 6800, mining renders the machine basically useless for normal work, which leaves me completely confused about what could cause such a difference in Windows responsiveness (with that much better a graphic card) and more importantly, how can I fix this? Thank yo in advance
Use TeamRed Miner. |
|
|
|
|
coinhunter142
Newbie
Offline
Activity: 23
Merit: 0
|
|
February 13, 2021, 10:48:54 AM |
|
RX 6800 Phoenixminer mining renders Windows 10 unresponsive?!?
I have just gotten a new XFX 6800 card and wanted to put it to good use, so I downvolted/reduced GPU freq/boosted the ram freq and I hit 63 MH (oh my, for a card like this #eyeroll) right off the bat, but as soon as the card starts mining, Windows become quite unresponsive (dragging a window causes a 1s freeze, etc.) I used to mine with my old RX570 and using the exact same machine + the exact same (three) monitors, the miner didn't slow down Windows AT ALL. But with 6800, mining renders the machine basically useless for normal work, which leaves me completely confused about what could cause such a difference in Windows responsiveness (with that much better a graphic card) and more importantly, how can I fix this? Thank yo in advance
Use TeamRed Miner. Awesome! TeamRed Miner solved the issue, GPU is now at 99%, still delivering 62 MH and Windows is fully operational again (for office work), which is exactly what I needed, so thanks a million! This is something both the Phoenixminer and Claymore need to catch up to. |
|
|
|
|
Kiawpqe
Jr. Member
Offline
Activity: 63
Merit: 1
|
|
February 13, 2021, 10:56:29 AM |
|
Thank you... i see here you are mining on ethermine? how to change it to binance pool and i can view its statistic in binance site? #
# PhoenixMiner configuration file
#
#
-rxboost 0,81,81,81,81,81,81,25
-gt 15,38,38,41,43,42,42,52
-rmode 1
-tt 50,60,60,60,60,60,60,48
-fanmin 30
-fanmax 100
-eres 100
-proto 3
-cdm 2
-hstats 2
-astats 1
-amd
-acm
-wdog 1
-gpow 100,100,100,100,100,100,100,100
-minRigSpeed 265
-coin eth
-clf 1
-clNew 1
-clKernel 1
-prate 0.135
-gpus 1,2,3,4,5,6,7,8
-cclock 1195,1190,1190,1200,1200,1200,1200,1200
-cvddc 793,853,853,855,850,850,850,750
-mclock 2110,2090,2090,2090,2113,2113,2113,1825
-mvddc 850,860,860,860,853,853,853,850
-pool ssl://eu1.ethermine.org:5555
-pool2 ssl://us1.ethermine.org:5555
#GRAVIEX-WALLET
#-wal 0x7**********************************.32*******
#BINANCE-WALLET
-wal 0x7**********************************.32*******
-mt 0,0,0,0,0,0,0,0,1
#-pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444
#-wal YourEthWalletAddress.WorkerName
#-proto 3
#-cdm 2
Eth: New job #b575c3a7 from ssl://eu1.ethermine.org:5555; diff: 4000MH
GPU1: 50C 43% 167W, GPU2: 60C 39% 88W, GPU3: 60C 40% 95W, GPU4: 57C 34% 86W, GPU5: 59C 33% 83W, GPU6: 60C 30% 82W, GPU7: 58C 30% 83W, GPU8: 47C 28% 90W
GPU1: cclock 1176 MHz, cvddc 793 mV, mclock 2098 MHz, Tj 55C
GPU2: cclock 1190 MHz, cvddc 862 mV, mclock 2090 MHz
GPU3: cclock 1190 MHz, cvddc 862 mV, mclock 2090 MHz
GPU4: cclock 1200 MHz, cvddc 862 mV, mclock 2090 MHz
GPU5: cclock 1200 MHz, cvddc 856 mV, mclock 2110 MHz
GPU6: cclock 1200 MHz, cvddc 856 mV, mclock 2113 MHz
GPU7: cclock 1200 MHz, cvddc 856 mV, mclock 2110 MHz
GPU8: cclock 1159 MHz, cvddc 750 mV, mclock 1816 MHz, mvddc 850 mV, Tj 53C, Tmem 80C
GPUs power: 773.1 W; cost: 2.50 USD/day
Eth speed: 305.953 MH/s, shares: 1517/0/2, time: 5:28
GPUs: 1: 59.841 MH/s (312) 2: 32.312 MH/s (160) 3: 32.313 MH/s (152/1) 4: 32.281 MH/s (151) 5: 32.489 MH/s (175/1) 6: 32.489 MH/s (160) 7: 32.488 MH/s (163) 8: 51.741 MH/s (244)
-pool ethash.poolbinance.com:3333 or -pool ethash.poolbinance.com:443 -pool ethash.poolbinance.com:25 -pool ethash.poolbinance.com:1800 -wal YourEthWalletAddress.WorkerName -proto 2 tutorial of binance https://www.binance.com/en/support/faq/9bd21a9536d74d1fb65c83f8e60ded93 |
|
|
|
|
batsonxl
Member
Offline
Activity: 1196
Merit: 26
|
|
February 13, 2021, 11:06:03 AM |
|
RX 6800 Phoenixminer mining renders Windows 10 unresponsive?!?
I have just gotten a new XFX 6800 card and wanted to put it to good use, so I downvolted/reduced GPU freq/boosted the ram freq and I hit 63 MH (oh my, for a card like this #eyeroll) right off the bat, but as soon as the card starts mining, Windows become quite unresponsive (dragging a window causes a 1s freeze, etc.) I used to mine with my old RX570 and using the exact same machine + the exact same (three) monitors, the miner didn't slow down Windows AT ALL. But with 6800, mining renders the machine basically useless for normal work, which leaves me completely confused about what could cause such a difference in Windows responsiveness (with that much better a graphic card) and more importantly, how can I fix this? Thank yo in advance
if you go 1-2 pages back you will find your answer |
|
|
|
|
batsonxl
Member
Offline
Activity: 1196
Merit: 26
|
|
February 13, 2021, 11:08:25 AM |
|
I just tried PM to Ethermine today, been mining about 2 hours.
As I look through the log, it seems that DEVFEE is having problems,
Is devfee harmless here or is it causing a problem. I should NOT see the word DEVFEE for 30 I dont think.
Here is a snippet:
Starts devfee at 31 min:
Eth speed: 29.173 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #432dd006 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #b589f85a from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #93f0fd85 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #68ab5dc2 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #e8ef7f65 from us1.ethermine.org:4444; diff: 4000MH
DevFee: Connecting to ethash pool ssl://us1.ethermine.org:5555 (proto: QtMiner)
Eth speed: 29.028 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #643f46f2 from us1.ethermine.org:4444; diff: 4000MH
*** 0:32 *** 2/12 15:59 **************************************
Eth: Mining ETH on us1.ethermine.org:4444 for 0:32
DEVFEE then tries to disconnnect at 32, but errors out
Eth: Accepted shares 15 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 42.3 GH (!)
Eth: Average speed (5 min): 29.160 MH/s
Eth: Effective speed: 30.91 MH/s; at pool: 30.91 MH/s
Eth speed: 29.044 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #2a359ab5 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #712000d3 from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.028 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #88668535 from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.202 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #f7b8cca6 from us1.ethermine.org:4444; diff: 4000MH
DevFee: Could not connect to ethash pool ssl://us1.ethermine.org:5555: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond
DevFee: Giving up after 1 retries, switching to next pool
DevFee: Reconnecting in 3 seconds...
Eth speed: 29.199 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #00eaedf2 from us1.ethermine.org:4444; diff: 4000MH
DevFee: Connecting to ethash pool ssl://asia1.ethermine.org:5555 (proto: EthProxy)
GPU1: 66C 24% 67W
GPUs power: 67.0 W
Eth: New job #3567d583 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #5864b00f from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.196 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #8aecdf07 from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.200 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #7e2df522 from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.201 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #da9fcb3e from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.193 MH/s, shares: 15/0/0, time: 0:33
Eth: New job #764b8689 from us1.ethermine.org:4444; diff: 4000MH
DevFee: Disconnected and stopped
DevFee: Could not connect to ethash pool ssl://asia1.ethermine.org:5555: The I/O operation has been aborted because of either a thread exit or an application request
DevFee: Giving up after 1 retries, switching to next pool
DevFee: Reconnecting in 3 seconds...
DevFee: Connecting to ethash pool eth-us-east1.nanopool.org:9999 (proto: EthProxy)
DevFee: Connected to ethash pool eth-us-east1.nanopool.org:9999 (144.217.14.109)
Eth: New job #734bb31c from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #57482cae from eth-us-east1.nanopool.org:9999; diff: 10000MH
Eth speed: 29.119 MH/s, shares: 15/0/0, time: 0:33
DevFee: New job #f867e4e8 from eth-us-east1.nanopool.org:9999; diff: 10000MH
*** 0:33 *** 2/12 15:59 **************************************
Eth: Mining ETH on us1.ethermine.org:4444 for 0:33
Eth: Accepted shares 15 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 42.3 GH (!)
Eth: Average speed (5 min): 29.160 MH/s
Eth: Effective speed: 30.21 MH/s; at pool: 30.21 MH/s
Eth: New job #324aa8fe from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #6247e354 from eth-us-east1.nanopool.org:9999; diff: 10000MH
Eth speed: 29.091 MH/s, shares: 15/0/0, time: 0:33
Devfee then continues
DevFee: New job #e92074f7 from eth-us-east1.nanopool.org:9999; diff: 10000MH
Eth: New job #b7ac896a from us1.ethermine.org:4444; diff: 4000MH
GPU1: 66C 24% 67W
GPUs power: 67.1 W
DevFee: New job #08abbe59 from eth-us-east1.nanopool.org:9999; diff: 10000MH
Eth speed: 29.092 MH/s, shares: 15/0/0, time: 0:33
Eth: New job #7e3f33dd from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #0e0dc839 from eth-us-east1.nanopool.org:9999; diff: 10000MH
Eth: New job #875a86df from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.201 MH/s, shares: 15/0/0, time: 0:33
DevFee: New job #6d0b6a08 from eth-us-east1.nanopool.org:9999; diff: 10000MH
DevFee: New job #8541dda2 from eth-us-east1.nanopool.org:9999; diff: 10000MH
Eth: New job #e5f9003f from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.199 MH/s, shares: 15/0/0, time: 0:33
DevFee: New job #aa60acce from eth-us-east1.nanopool.org:9999; diff: 10000MH
Eth: New job #8cdd1ced from us1.ethermine.org:4444; diff: 4000MH
Devfee continue for 20 min, eating all of my shares:
th: New job #33cf540e from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #33cf540e from asia1.ethermine.org:14444; diff: 4000MH
Eth speed: 29.133 MH/s, shares: 21/0/0, time: 0:55
Eth: New job #b1ae5d1c from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #b1ae5d1c from asia1.ethermine.org:14444; diff: 4000MH
Eth speed: 29.197 MH/s, shares: 21/0/0, time: 0:55
Eth: New job #3dc8081d from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #3dc8081d from asia1.ethermine.org:14444; diff: 4000MH
DevFee: New job #cc1def1c from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #cc1def1c from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #12843e8f from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #12843e8f from us1.ethermine.org:4444; diff: 4000MH
GPU1: 66C 24% 67W
GPUs power: 67.2 W
DevFee: New job #9950561d from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #9950561d from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.197 MH/s, shares: 21/0/0, time: 0:55
DevFee: New job #326c7653 from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #326c7653 from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #7578c305 from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #7578c305 from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 29.163 MH/s, shares: 21/0/0, time: 0:55
DevFee: New job #cc53eac3 from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #cc53eac3 from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #9fa0fec0 from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #9fa0fec0 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #d1d9c59c from us1.ethermine.org:4444; diff: 4000MH
DevFee: New job #d1d9c59c from asia1.ethermine.org:14444; diff: 4000MH
Eth speed: 29.134 MH/s, shares: 21/0/0, time: 0:55
*** 0:55 *** 2/12 16:22 **************************************
Eth: Mining ETH on us1.ethermine.org:4444 for 0:21
Eth: Accepted shares 21 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 42.3 GH (!)
Eth: Average speed (5 min): 29.158 MH/s
Eth: Effective speed: 25.16 MH/s; at pool: 25.16 MH/s
DevFee: New job #b4c4ee4e from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #b4c4ee4e from us1.ethermine.org:4444; diff: 4000MH
DevFee: Disconnected and stopped
Eth speed: 29.127 MH/s, shares: 21/0/0, time: 0:55
Where did you downloaded phoenix miner. looks like you got from another source. delete all you got scan if you can make fresh windows install then download miner from 1st page. |
|
|
|
|
|
Toughit
|
|
February 13, 2021, 12:25:21 PM |
|
I just tried PM to Ethermine today, been mining about 2 hours.
As I look through the log, it seems that DEVFEE is having problems,
Is devfee harmless here or is it causing a problem. I should NOT see the word DEVFEE for 30 I dont think.
Here is a snippet:
Starts devfee at 31 min:
Eth speed: 29.173 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #432dd006 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #b589f85a from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #93f0fd85 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #68ab5dc2 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #e8ef7f65 from us1.ethermine.org:4444; diff: 4000MH
DevFee: Connecting to ethash pool ssl://us1.ethermine.org:5555 (proto: QtMiner)
Eth speed: 29.028 MH/s, shares: 15/0/0, time: 0:32
Eth: New job #643f46f2 from us1.ethermine.org:4444; diff: 4000MH
*** 0:32 *** 2/12 15:59 **************************************
Eth: Mining ETH on us1.ethermine.org:4444 for 0:32
DEVFEE then tries to disconnnect at 32, but errors out
Eth: Accepted shares 15 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 42.3 GH (!)
Eth: Average speed (5 min): 29.160 MH/s
Eth: Effective speed: 30.91 MH/s; at pool: 30.91 MH/s
DevFee: New job #b4c4ee4e from asia1.ethermine.org:14444; diff: 4000MH
Eth: New job #b4c4ee4e from us1.ethermine.org:4444; diff: 4000MH
DevFee: Disconnected and stopped
Eth speed: 29.127 MH/s, shares: 21/0/0, time: 0:55
Where did you downloaded phoenix miner. looks like you got from another source. delete all you got scan if you can make fresh windows install then download miner from 1st page. The miner was downloaded from the first page, |
|
|
|
|
coinhunter142
Newbie
Offline
Activity: 23
Merit: 0
|
|
February 13, 2021, 03:37:30 PM |
|
RX 6800 Phoenixminer mining renders Windows 10 unresponsive?!?
I have just gotten a new XFX 6800 card and wanted to put it to good use, so I downvolted/reduced GPU freq/boosted the ram freq and I hit 63 MH (oh my, for a card like this #eyeroll) right off the bat, but as soon as the card starts mining, Windows become quite unresponsive (dragging a window causes a 1s freeze, etc.) I used to mine with my old RX570 and using the exact same machine + the exact same (three) monitors, the miner didn't slow down Windows AT ALL. But with 6800, mining renders the machine basically useless for normal work, which leaves me completely confused about what could cause such a difference in Windows responsiveness (with that much better a graphic card) and more importantly, how can I fix this? Thank yo in advance
if you go 1-2 pages back you will find your answer I did, thank you for your answer, though it would be nice if Phoenixminer prevented this problem out of the box, cause it took me quite a while before I found the solution. |
|
|
|
|
3_tech
Newbie
Offline
Activity: 1
Merit: 0
|
|
February 13, 2021, 05:43:15 PM |
|
using PhoenixMiner_5.5c_Windows and have slowdown with newer Nvidia drivers
nvidia v460.89 ~60 Mh/s
any newer nvidia driver (e.g. 461.40) ~50 Mh/s
I've tried running PhoenixMiner as Admin - still ~50 MH/s
reinstall nvidia v460.89 back to ~60 Mh/s
Any solutions for reclaiming hash rate with newer nvidia drivers? Many thanks.
Hash rate quoted while only running miner, with PC at lock screen.
Card:
Nvidia 3060ti
-500 clock
+1050 ram
60% power
PC:
5900X CPU
x570 MB
windows 10 64bit
|
|
|
|
|
HariSeldon85
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 13, 2021, 06:42:45 PM |
|
Hi Everyone, sorry for the silly question, maybe is my second post on this forum  I've read documentation and guides, and I've started to mine Eth with my 3070, associated to a wallet address from "My EthereumWallet". I'm mining Ethermine with this command: PhoenixMiner.exe -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal [0xWALLETADDRESS] -proto 3
pause
Eth speed: 59.597 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #acd21def from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #1990f547 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #96b3f63b from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 59.313 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #7212f2e3 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #c03cd29e from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 59.006 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #2087171e from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 58.632 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #d3862a91 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #c165a715 from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 58.844 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #e9e24b65 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #b11ae5ed from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #78022362 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #d93a8d7c from eu1.ethermine.org:4444; diff: 4000MH
GPU1: 68C 72% 165W
GPUs power: 164.6 W
*** 6:47 *** 2/13 19:39 **************************************
Eth: Mining ETH on eu1.ethermine.org:4444 for 6:47
Eth speed: 59.073 MH/s, shares: 324/0/0, time: 6:47
Eth: Accepted shares 324 (66 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 20.37%
Eth: Maximum difficulty of found share: 7143.5 GH (!)
Eth: Average speed (5 min): 59.261 MH/s
Eth: Effective speed: 53.06 MH/s; at pool: 53.06 MH/s I've checked MyEtherWallet and still no reward...mining from 7 hours...is this normal? How long usually need to wait with ethermine pool to have a reward? Many thanks in advance |
|
|
|
|
|
Toughit
|
|
February 13, 2021, 07:34:14 PM |
|
Hi Everyone, sorry for the silly question, maybe is my second post on this forum I've read documentation and guides, and I've started to mine Eth with my 3070, associated to a wallet address from "My EthereumWallet". I'm mining Ethermine with this command: PhoenixMiner.exe -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal [0xWALLETADDRESS] -proto 3
pause
Eth speed: 59.597 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #acd21def from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #1990f547 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #96b3f63b from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 59.313 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #7212f2e3 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #c03cd29e from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 59.006 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #2087171e from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 58.632 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #d3862a91 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #c165a715 from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 58.844 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #e9e24b65 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #b11ae5ed from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #78022362 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #d93a8d7c from eu1.ethermine.org:4444; diff: 4000MH
GPU1: 68C 72% 165W
GPUs power: 164.6 W
*** 6:47 *** 2/13 19:39 **************************************
Eth: Mining ETH on eu1.ethermine.org:4444 for 6:47
Eth speed: 59.073 MH/s, shares: 324/0/0, time: 6:47
Eth: Accepted shares 324 (66 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 20.37%
Eth: Maximum difficulty of found share: 7143.5 GH (!)
Eth: Average speed (5 min): 59.261 MH/s
Eth: Effective speed: 53.06 MH/s; at pool: 53.06 MH/s I've checked MyEtherWallet and still no reward...mining from 7 hours...is this normal? How long usually need to wait with ethermine pool to have a reward? Many thanks in advance Took maybe 15 min for mine to show up yesterday. Wallet address problem? |
|
|
|
|
HariSeldon85
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 13, 2021, 07:48:13 PM |
|
Hi Everyone, sorry for the silly question, maybe is my second post on this forum I've read documentation and guides, and I've started to mine Eth with my 3070, associated to a wallet address from "My EthereumWallet". I'm mining Ethermine with this command: PhoenixMiner.exe -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal [0xWALLETADDRESS] -proto 3
pause
Eth speed: 59.597 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #acd21def from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #1990f547 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #96b3f63b from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 59.313 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #7212f2e3 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #c03cd29e from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 59.006 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #2087171e from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 58.632 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #d3862a91 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #c165a715 from eu1.ethermine.org:4444; diff: 4000MH
Eth speed: 58.844 MH/s, shares: 324/0/0, time: 6:46
Eth: New job #e9e24b65 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #b11ae5ed from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #78022362 from eu1.ethermine.org:4444; diff: 4000MH
Eth: New job #d93a8d7c from eu1.ethermine.org:4444; diff: 4000MH
GPU1: 68C 72% 165W
GPUs power: 164.6 W
*** 6:47 *** 2/13 19:39 **************************************
Eth: Mining ETH on eu1.ethermine.org:4444 for 6:47
Eth speed: 59.073 MH/s, shares: 324/0/0, time: 6:47
Eth: Accepted shares 324 (66 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 20.37%
Eth: Maximum difficulty of found share: 7143.5 GH (!)
Eth: Average speed (5 min): 59.261 MH/s
Eth: Effective speed: 53.06 MH/s; at pool: 53.06 MH/s I've checked MyEtherWallet and still no reward...mining from 7 hours...is this normal? How long usually need to wait with ethermine pool to have a reward? Many thanks in advance Took maybe 15 min for mine to show up yesterday. Wallet address problem? No problem at all... i mean... I just copy& paste the wallet address from myetherwallet. Are you sure you need only 15 minutes to receive the first reward ? |
|
|
|
|
|
Toughit
|
|
February 13, 2021, 10:42:28 PM |
|
Hi Everyone, sorry for the silly question, maybe is my second post on this forum I've read documentation and guides, and I've started to mine Eth with my 3070, associated to a wallet address from "My EthereumWallet". I'm mining Ethermine with this command: PhoenixMiner.exe -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal [0xWALLETADDRESS] -proto 3
pause
Took maybe 15 min for mine to show up yesterday. Wallet address problem? No problem at all... i mean... I just copy& paste the wallet address from myetherwallet. Are you sure you need only 15 minutes to receive the first reward ? Certainly within the hour I had a chart going on the ethermine page. Your wallet address does NOT have these around it does it: []? Can you restart it and capture the first fifty lines or so from the log? Try -wal 0xabcetc.Hari (wallet address dot some name) |
|
|
|
|
|
Toughit
|
|
February 13, 2021, 11:03:46 PM |
|
Maybe I'm asking the wrong question....
When you go to the ethermine page and enter your wallet, do you see the page with your shares displayed, I'm guessing 45 per hour.
If you are talking money, it takes about .1 ETH before they actually pay money, so you have to earn $170 dollars or so.
|
|
|
|
|
Devan_Bot
Newbie
Offline
Activity: 1
Merit: 0
|
|
February 14, 2021, 02:30:38 AM |
|
Need help fixing the below error occurring after DAG 100%
Stratum thread not responsive for 51 s
Fatal error detected. Restarting .
|
|
|
|
|
HariSeldon85
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 14, 2021, 09:59:25 AM |
|
Maybe I'm asking the wrong question....
When you go to the ethermine page and enter your wallet, do you see the page with your shares displayed, I'm guessing 45 per hour.
If you are talking money, it takes about .1 ETH before they actually pay money, so you have to earn $170 dollars or so.
that was symply the point, I've figured it out by myself. Ethermine has a threashold before payout. On ethermine page I'm seeing gained ethereum. thanks a lot. |
|
|
|
|
mrbugera2
Jr. Member
Offline
Activity: 85
Merit: 2
|
|
February 14, 2021, 03:50:33 PM |
|
how many cards? Try give 50-60gb
6 gpu in each rig. how to increase? i have 16000 to 32000 i must type it in advanced settings? 1gb = 1024Mb 8Gb per card = 8192Mb vm space needed 8192Mb * 6 cards = 49125Mb vm space needed for the rig Yes you need to enter it in the advanced settings which will ne better, what to tupe in inital size and in maximum.. thanks for your reply |
|
|
|
|
Ahmed69
Newbie
Offline
Activity: 3
Merit: 0
|
|
February 14, 2021, 10:21:44 PM |
|
how many cards? Try give 50-60gb
6 gpu in each rig. how to increase? i have 16000 to 32000 i must type it in advanced settings? 1gb = 1024Mb 8Gb per card = 8192Mb vm space needed 8192Mb * 6 cards = 49125Mb vm space needed for the rig Yes you need to enter it in the advanced settings which will ne better, what to tupe in inital size and in maximum.. thanks for your reply witchever , just tupe in man.. gooz luk |
|
|
|
|
|
