|
aclass
|
 |
March 18, 2021, 04:35:55 AM |
|
This memclock is INSANE.  Can you post GPU-Z sensors tab please. |
|
|
|
|
rednoW
Legendary
 Offline
Activity: 1510
Merit: 1003
|
|
March 18, 2021, 09:41:57 AM |
|
|
|
|
|
|
|
ol92
|
|
March 18, 2021, 09:43:15 AM |
|
This memclock is INSANE. Can you post GPU-Z sensors tab please. I have manage to reach around 64mh/s with mem @ 8400, gpu @900 on a legion 5 pro with a RTX 3070 using afterburner curve with voltage at 700. I didn't know you can reach lower voltage with nvinspector! This is the advantage of mobile gpu: their voltage curve can reach lower voltage than their desktop parts (in exchange you loose access to high core gpu frequency / high gpu voltage: which are no use for ethereum mining). Thanks you rednoW for the nvinpector hint! |
|
|
|
|
Strydersbane
Newbie
Offline
Activity: 1
Merit: 0
|
|
March 18, 2021, 10:11:12 AM |
|
Hello to all.
Just starting, bought 1 GPU so far to get started:
GeForce GTX 1660 6GB
I am going to try ethermine.org to start.
I am going to try all 3:
- T-Rex
- Ethminer
- Phoenix
...to see what experience each has.
Can anyone suggest best first coin to begin mining...or any other suggestions for a total noob?
Thank you!
|
|
|
|
|
|
1337leet
|
|
March 18, 2021, 11:48:16 PM |
|
Hey guys,
I have got a Zotac RTX 3090 Trinity.
Can someone please give me the best settings for this card for t-rex?
Aiming for 120 MHs with maximum +1200 MHz on the ram.
System: Windows 10
Driver: which is the best?
|
|
|
|
|
davegaming641
Newbie
Offline
Activity: 1
Merit: 0
|
|
March 19, 2021, 04:28:40 AM |
|
how to quit the mining? whats the command? newbie here
|
|
|
|
|
dedizonesv2
Jr. Member
Offline
Activity: 152
Merit: 3
|
|
March 19, 2021, 05:22:23 PM |
|
I'm switching to T-rex after the Phoenix miner news. My rig is running on HiveOs. Is there any other information I need to add before running the miner? I'm using Ethermine pool:  Good choice  In argument, i added this: "worker": "%WORKER_NAME%"
"gpu-init-mode": 1
"dag-build-mode": 2
"api-bind-http": 0
"gpu-report-interval": 600 6 x RTX3070: nodbadshare "-502/2400/PL 125w" and Delay OC "240" |
|
|
|
|
justice-r
Newbie
Offline
Activity: 7
Merit: 0
|
|
March 19, 2021, 05:39:43 PM |
|
Hello guys..
I have an Asus 3060ti with 63,60Mhs stable for 2 months..
How to use -setMemoryClockOffset 0,0,1100 ?
It gives me error when i set this command to the batch file.
Thanks,
|
|
|
|
|
|
aclass
|
|
March 21, 2021, 10:43:47 AM |
|
It's not t-rex command. You can check this guide https://www.youtube.com/watch?v=-4mWOoZ2mpYHello guys..
I have an Asus 3060ti with 63,60Mhs stable for 2 months..
How to use -setMemoryClockOffset 0,0,1100 ?
It gives me error when i set this command to the batch file.
Thanks,
|
|
|
|
|
|
1337leet
|
|
March 21, 2021, 07:39:13 PM |
|
Hello guys,
I set up a new computer for mining.
Do I need to install the whole CUDA package or only the driver alone?
|
|
|
|
|
joseph32
Member
Offline
Activity: 418
Merit: 21
|
|
March 22, 2021, 07:11:31 AM |
|
Hello guys,
I set up a new computer for mining.
Do I need to install the whole CUDA package or only the driver alone?
Just the driver, thats all you need. |
|
|
|
|
blueknight32
Newbie
Offline
Activity: 1
Merit: 0
|
|
March 22, 2021, 11:52:49 AM |
|
Okay So I'm seriously pissed about this issue. I have my usual T-rex miner config setup (Same one I have been using since before my network change) but wen the screen shuts off it seems the miner connection fails which is ridiculous. The only thing changed was I went from the crappy cox all in one gateway modem/router to a Ubiquiti Dream machine pro. My computer is connected via hardwire cat6 and get 7ms pings, 850 mb/s down and no network problems other wise BUT it seems like maybe the dream machine is blocking something at the network level? I have added the entire trex folder to the windows 10 exclusion list and have actually just fully disabled the win10 antivirus for now. The computer is not set to sleep only the screen is. All low power settings are disabled for things such as the the Ethernet NIC and video card. Once the screen shuts off after 10 minutes about 3 minutes later the miner stops connecting with the errors listed in the image attached to link. I am using t-rex-0.19.11-win-cuda11.1 for my MSI RTX 3090 with current code : t-rex.exe -a ethash -o stratum+tcp://us2.ethermine.org:4444 -u 0xmineraddress -p x -w rig0 pause https://ibb.co/TWwggdG |
|
|
|
|
justice-r
Newbie
Offline
Activity: 7
Merit: 0
|
|
March 22, 2021, 08:52:39 PM |
|
It's not t-rex command. You can check this guide https://www.youtube.com/watch?v=-4mWOoZ2mpYHello guys..
I have an Asus 3060ti with 63,60Mhs stable for 2 months..
How to use -setMemoryClockOffset 0,0,1100 ?
It gives me error when i set this command to the batch file.
Thanks,
Oh, thanks mate.. |
|
|
|
|
generalt
Legendary
Offline
Activity: 1096
Merit: 1021
|
|
March 22, 2021, 11:00:16 PM |
|
Okay So I'm seriously pissed about this issue. I have my usual T-rex miner config setup (Same one I have been using since before my network change) but wen the screen shuts off it seems the miner connection fails which is ridiculous. The only thing changed was I went from the crappy cox all in one gateway modem/router to a Ubiquiti Dream machine pro. My computer is connected via hardwire cat6 and get 7ms pings, 850 mb/s down and no network problems other wise BUT it seems like maybe the dream machine is blocking something at the network level? I have added the entire trex folder to the windows 10 exclusion list and have actually just fully disabled the win10 antivirus for now. The computer is not set to sleep only the screen is. All low power settings are disabled for things such as the the Ethernet NIC and video card. Once the screen shuts off after 10 minutes about 3 minutes later the miner stops connecting with the errors listed in the image attached to link. I am using t-rex-0.19.11-win-cuda11.1 for my MSI RTX 3090 with current code : t-rex.exe -a ethash -o stratum+tcp://us2.ethermine.org:4444 -u 0xmineraddress -p x -w rig0 pause  It sounds like Windows is putting the network card or wifi card to sleep. You should check the power save settings for that in Windows. |
BTC: 1GENERALrtBAjEv2Ps5cmEW1FADnXh1bCZ
|
|
|
|
1337leet
|
|
March 26, 2021, 09:28:28 AM |
|
Final thought - fake monitor dongle needed?
No, you don't need it in general. The RTX 3060 needs it. For all other cards you don't need it. But if you wanna control the miner with Teamviewer you need a dummy, because it uses the output signal. Without anything plugged in you will get a black screen on Teamviewer. |
|
|
|
|
willi9974
Legendary
Offline
Activity: 3626
Merit: 2900
Enjoy 500% bonus + 70 FS
|
|
March 28, 2021, 02:27:58 PM |
|
Hello all,
short two questions
20210328 16:24:55 Mining at eth-eu1.nanopool.org:9999, diff: 10.00 G
20210328 16:24:55 GPU #0: ASUS RTX 3070 - 62.05 MH/s, [T:62C, P:129W, F:70%, E:481kH/W], 156/156 R:0%
20210328 16:24:55 GPU #1: RTX 3070 - 60.74 MH/s, [T:52C, P:120W, F:32%, E:510kH/W], 115/115 R:0%
20210328 16:24:55 Hashrate: 122.78 MH/s, Shares/min: 0.865 (Avr. 0.7) R: 3.321%, Avr.P: 248W, Avr.E: 495kH/W
20210328 16:24:55 Uptime: 6 hours 18 mins 33 secs | Algo: ethash | T-Rex v0.19.11
20210328 16:24:55 WD: 6 hours 18 mins 39 secs, shares 262/271
1: any ideas why the card 1 brings more than the card 2
2: what is the console parameter F:70%?
Best Regards,
Willi
|
|
|
|
|
miner29
|
|
March 28, 2021, 02:33:51 PM |
|
Hello all,
short two questions
20210328 16:24:55 Mining at eth-eu1.nanopool.org:9999, diff: 10.00 G
20210328 16:24:55 GPU #0: ASUS RTX 3070 - 62.05 MH/s, [T:62C, P:129W, F:70%, E:481kH/W], 156/156 R:0%
20210328 16:24:55 GPU #1: RTX 3070 - 60.74 MH/s, [T:52C, P:120W, F:32%, E:510kH/W], 115/115 R:0%
20210328 16:24:55 Hashrate: 122.78 MH/s, Shares/min: 0.865 (Avr. 0.7) R: 3.321%, Avr.P: 248W, Avr.E: 495kH/W
20210328 16:24:55 Uptime: 6 hours 18 mins 33 secs | Algo: ethash | T-Rex v0.19.11
20210328 16:24:55 WD: 6 hours 18 mins 39 secs, shares 262/271
1: any ideas why the card 1 brings more than the card 2
2: what is the console parameter F:70%?
Best Regards,
Willi
f:70% is fans 70% full speed Difference in cards and possibly clocks. The second card is more efficient than the first....first is using more power so its probably clocked a little higher. Check your clocks. |
|
|
|
|
willi9974
Legendary
Offline
Activity: 3626
Merit: 2900
Enjoy 500% bonus + 70 FS
|
|
March 28, 2021, 02:42:29 PM |
|
GPU #0: ASUS RTX 3070
Coreclock: -502 --> 930 MHz (is on max minus value)
Memclock: +1500 --> 8300 MHz (is on max plus value)
Powerlimit: 54%
Found 166 Shares in 6,5 hours
20210328 16:40:57 GPU #0: ASUS RTX 3070 - 60.59 MH/s, [T:62C, P:128W, F:70%, E:473kH/W], 166/166 R:0%
GPU #1: RTX 3070
Coreclock: -502 --> 630 MHz (is on max minus value)
Memclock: +1500 --> 8300 MHz (is on max plus value)
Powerlimit: 55%
Found 108 Shares in 6,5 hours
20210328 16:40:57 GPU #1: RTX 3070 - 60.77 MH/s, [T:52C, P:120W, F:32%, E:511kH/W], 108/117 R:7.69%
What do you mean i could do better...?
|
|
|
|
aavvaallooss
Newbie
Offline
Activity: 5
Merit: 0
|
|
March 28, 2021, 02:45:03 PM |
|
I don´t understand the last added command line "--validate-shares Validate shares before sending to a pool. Also enables share diff info".
What is for? It´s good or bad for avoid stale or invalid shares?
|
|
|
|
|
|
miner29
|
|
March 28, 2021, 04:33:44 PM |
|
GPU #0: ASUS RTX 3070
Coreclock: -502 --> 930 MHz (is on max minus value)
Memclock: +1500 --> 8300 MHz (is on max plus value)
Powerlimit: 54%
Found 166 Shares in 6,5 hours
20210328 16:40:57 GPU #0: ASUS RTX 3070 - 60.59 MH/s, [T:62C, P:128W, F:70%, E:473kH/W], 166/166 R:0%
GPU #1: RTX 3070
Coreclock: -502 --> 630 MHz (is on max minus value)
Memclock: +1500 --> 8300 MHz (is on max plus value)
Powerlimit: 55%
Found 108 Shares in 6,5 hours
20210328 16:40:57 GPU #1: RTX 3070 - 60.77 MH/s, [T:52C, P:120W, F:32%, E:511kH/W], 108/117 R:7.69%
What do you mean i could do better...?
Are they same makes of vram? different vram has different ideal settings. |
|
|
|
|
|
