Bicknellski
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2014, 07:55:29 AM Last edit: November 04, 2014, 03:40:21 PM by Bicknellski |
|
How much BTC would you guys pay for a used sp30 right now?
4 BTC maybe can a "hero" pawnshop move away to another thread, please. You noobie Sr. Members just don't get it ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) i should intervene, at risk of going way off topic, you shouldn't ever buy mining equipment with BTC. it's like buying BTC, with BTC ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) put those worthless $$$$ into buying SP31 and get the much more worthy BTC when you mine 'em! Buy BTC with $$$ then buy miners with BTC is what I do, when and if the price is right and profitability / resale potential is possible. These units do have a strong resale value still. I am still mining with some S3s on an altcoin sold off my SP30s after a month solid mining them great machines. Our school is keen on getting some SP20s or C1s for fun and giggles later.
|
|
|
|
boscocoin
Newbie
Offline
Activity: 36
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2014, 09:16:04 AM |
|
Guy has still not contacted me regarding my refund/compensation.
It is becoming frustrating now e-mailed them again and again every day.
I have even received my invoice for the hosting at Michagan.
|
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2014, 09:38:48 AM |
|
Guy has still not contacted me regarding my refund/compensation.
It is becoming frustrating now e-mailed them again and again every day.
I have even received my invoice for the hosting at Michagan.
I'm sorry for our slow handling. You got the following reply yesterday: We are reviewing this to determine what compensation is needed. Guy
|
|
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2014, 11:44:49 AM Last edit: November 04, 2014, 05:03:56 PM by Tupsu |
|
To Spondoolies-Tech I ordered the SP20 (Order Date 09/09/2014) from 1,047.28 Euro and I'm still not paying for the order.
Can I pay from this order today and how much should be amount in euro?
Yesterday SP20 cost was 1,070.62 Euro with shipping.
EDIT. My first SP20 arrived.No more need to be answered. Please cancel SP20 orders : order #2696 order #2698 order #2697 order #2699
|
|
|
|
Prelude
Legendary
Offline
Activity: 1596
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2014, 01:00:52 PM |
|
How much BTC would you guys pay for a used sp30 right now?
4 BTC maybe can a "hero" pawnshop move away to another thread, please. No. And to clarify since I've gotten PMs to buy my SP30, I don't have one. I was thinking about buying a used SP30.
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2014, 03:09:13 PM |
|
-------------------------
Buy BTC with $$$ then buy miners with BTC is what I do, when and if the price is right and profitability / resale potential is possible. These units do have a strong resale value still.
So you are not EVEN mining right? And when deal does not suits you you cry for refund. Nice seems fair. How pathetic..
|
|
|
|
nhminer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2014, 07:13:35 PM |
|
SP20 arrived today; up and mining in 30 minutes
However, ASIC stats shows: LOOP[3] OFF (test serial failed or something) 6: disabled (i2c good, no OC) 7: disabled (i2c good, no OC)
Should I be concerned?
~nh
PS -- email sent to support, but I'm looking for collective wisdom here...
|
BCH - 1EshwUEg9LRbY5WMSw7bkBGQUYQeenkcet
|
|
|
hdbuck
Legendary
Offline
Activity: 1260
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2014, 07:28:58 PM |
|
PS -- email sent to support, but I'm looking for collective wisdom here...
you should wait their answer. ^^
|
|
|
|
Biodom
Legendary
Offline
Activity: 3864
Merit: 4235
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2014, 08:17:51 PM |
|
How much BTC would you guys pay for a used sp30 right now?
4 BTC maybe can a "hero" pawnshop move away to another thread, please. No. And to clarify since I've gotten PMs to buy my SP30, I don't have one. I was thinking about buying a used SP30. No? This is NOT a marketplace thread, but if you insist, I have one or two for you for, say, about 9-9.5 BTC. Watch various OP jump on this with their ridiculous 4 BTC comments. Then, perhaps, moderator will remove all of this. SP35 is for sale at $3900 plus shipping, that's more than 12 BTC. Sp35 is 5.5 th vs 4.5 th for Sp-30., but ships later in the month. 12X4.5/5.5=9.81 BTC fair price for Sp-30.
|
|
|
|
wh00per
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2014, 08:35:00 PM |
|
No? This is NOT a marketplace thread, but if you insist, I have one or two for you for, say, about 9-9.5 BTC. Watch various OP jump on this with their ridiculous 4 BTC comments. Then, perhaps, moderator will remove all of this. SP35 is for sale at $3900 plus shipping, that's more than 12 BTC. Sp35 is 5.5 th vs 4.5 th for Sp-30., but ships later in the month. 12X4.5/5.5=9.81 BTC fair price for Sp-30.
Back during the summer I paid 10.5 BTC for a SP30. I got refunded 2.1 BTC (for compensation) and the nice unit mined 4.24268512 BTC up to this date. I can see where Blazedout419 comes from. It makes some sense what he said if you disregard the hosting paid since Aug, or electricity if you were keeping it at home. I guess the answer is between 4 BTC and 9 BTC .. if I would want to get even right now, I'd sell it somewhere around 6.5 BTC .. the hosting is expensive (about 1 BTC/month now). However, the units are good and can mine a lot longer. If you have free electricity ~4 BTC is straight on the spot. With the unit I got home, the whole thing gets more complicated. I paid another $560 in taxes at customs (so another 1.5 BTC) .. that makes it even more expensive (up to 8 BTC) if you buy one from Canada. And that's just to get even, and if the seller does not want to make any profit on it.
|
CSA/cUL Certified Power Distribution Panels - Basic, Switched, Metered. 1-3 phases. Up to 600V. NMC:N4F9qvHz11BHcc4nh1LCJFsrZhA1EWgVwj
|
|
|
zvisha
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2014, 10:24:14 PM |
|
Hi all. We will be using Chrome Shared Desktop instead of TeamViewer from now to provide support. Please install Chrome R.D. if calling for support (or open ports). Regards
|
|
|
|
zvisha
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2014, 10:28:19 PM |
|
SP20 arrived today; up and mining in 30 minutes
However, ASIC stats shows: LOOP[3] OFF (test serial failed or something) 6: disabled (i2c good, no OC) 7: disabled (i2c good, no OC)
Should I be concerned?
~nh
PS -- email sent to support, but I'm looking for collective wisdom here...
Yes. The unit didn't manage to make the 2 ASICs work. That is 25% of it's ASICs, so that has big impact. Both ASICs 6 and 7 sit on same PSU. Try to switch PSU between boards to see if the problem in board or PSU.
|
|
|
|
eleahcim
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2014, 10:38:09 PM |
|
SP31 received today. Thanks Spondoolies!!!!!
Upgraded FW to 2.5.6
Mining Rate: 4752.63Ghs
I am going to let it sit for a while and burn-in. It had a little odd behavior after the FW upgrade with one of the PSU's going offline and the mining rate cut in half. I pulled plugs and reset and the unit came back up and I had to start the miner manually. It's been running fine so far.
Temp Front / Back T,B 36 °C / 86,89 °C Socket Voltage 240/240 volt Fan Speed 70 Start Voltage 0.655 / 0.655 Max Voltage 0.75 Max Watts 1330 / 1330
|
|
|
|
RoadStress
Legendary
Offline
Activity: 1904
Merit: 1007
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2014, 11:24:21 PM |
|
Temp Front / Back T,B 36 °C / 86,89 °C Socket Voltage 240/240 volt Fan Speed 70
Put fans on 90. That's a hot room!
|
|
|
|
nhminer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2014, 12:36:26 AM |
|
SP20 arrived today; up and mining in 30 minutes
However, ASIC stats shows: LOOP[3] OFF (test serial failed or something) 6: disabled (i2c good, no OC) 7: disabled (i2c good, no OC)
Should I be concerned?
~nh
PS -- email sent to support, but I'm looking for collective wisdom here...
Yes. The unit didn't manage to make the 2 ASICs work. That is 25% of it's ASICs, so that has big impact. Both ASICs 6 and 7 sit on same PSU. Try to switch PSU between boards to see if the problem in board or PSU. Switched PSUs, same results ~nh
|
BCH - 1EshwUEg9LRbY5WMSw7bkBGQUYQeenkcet
|
|
|
Koontas
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2014, 02:06:23 AM |
|
Alright, well, I got my SP20 rig today and I've got to admit, it's pretty nice. I take back MOST of the stuff I said about Spondoolies. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Now tell me, what's the trick to getting it over 1310 gh/s?
|
Don't trust any exchange!
|
|
|
wh00per
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2014, 02:11:35 AM |
|
Alright, well, I got my SP20 rig today and I've got to admit, it's pretty nice. I take back MOST of the stuff I said about Spondoolies. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Now tell me, what's the trick to getting it over 1310 gh/s? buy 2 rigs ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
CSA/cUL Certified Power Distribution Panels - Basic, Switched, Metered. 1-3 phases. Up to 600V. NMC:N4F9qvHz11BHcc4nh1LCJFsrZhA1EWgVwj
|
|
|
Koontas
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2014, 02:15:16 AM |
|
Alright, well, I got my SP20 rig today and I've got to admit, it's pretty nice. I take back MOST of the stuff I said about Spondoolies. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Now tell me, what's the trick to getting it over 1310 gh/s? buy 2 rigs ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Well, that's disappointing considering the site still says 1.7th/s +/- 10%
|
Don't trust any exchange!
|
|
|
wh00per
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2014, 02:17:23 AM |
|
what kind of power supply are you using? please post link to the manufacturer or newegg/tigerdirect sites
then, log into the unit and post here the contents of your ASIC stats page.
|
CSA/cUL Certified Power Distribution Panels - Basic, Switched, Metered. 1-3 phases. Up to 600V. NMC:N4F9qvHz11BHcc4nh1LCJFsrZhA1EWgVwj
|
|
|
wh00per
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2014, 02:28:31 AM |
|
Zvi, What can I do/check to have this LOOP 9 communicate with the rest of the rig? It usually comes back after a number of reboots/restarts and then fails again when the mining process is restarted for whatever reasons might be (pool communications .. etc). Eventually .. it brings the whole bottom board down, the miner then hashing at about 2.2Gh/s. I lowered the power limits below those set by the miner itself, with about 30W per power supply. I also limited the voltage from 660 to 708 to avoid ASIC overheating (i.e. above 115 degC). The firmware is 2.4.23. Uptime:119 | FPGA ver:32 -----BOARD-0----- PSU[EMERSON1200]: 1440->1280w[1276 1280 1276] (->1327w[1327 1327 1327]) (lim=1305) 0c cooling:0/0x0 -----BOARD-1----- PSU[EMERSON1200]: 1200->1060w[1056 1060 1060] (->1099w[1099 1099 1099]) (lim=1270) 0c cooling:0/0x0 LOOP[0] ON 0: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 64W 93A 50c] ASIC:[ 85c 730hz(BL: 730) 249 (E:193) F:0] 1: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 67W 96A 51c] ASIC:[ 85c 745hz(BL: 745) 226 (E:191) F:0] 2: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 69W 99A 45c] ASIC:[ 85c 780hz(BL: 780) 210 (E:193) F:0] LOOP[1] ON 3: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 65W 94A 51c] ASIC:[ 85c 740hz(BL: 740) 212 (E:192) F:0] 4: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:794 Ul:706) 69W 99A 63c] ASIC:[ 85c 785hz(BL: 785) 201 (E:193) F:0] 5: DC2DC/1/:[vlt1:695 vlt2:698(DCl:794 Tl:794 Ul:706) 62W 88A 55c] ASIC:[ 85c 710hz(BL: 710) 166 (E:193) F:0] LOOP[2] ON 6: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 98A 66c] ASIC:[ 85c 785hz(BL: 785) 245 (E:193) F:0] 7: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 74W 106A 69c] ASIC:[ 85c 820hz(BL: 820) 222 (E:193) F:0] 8: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 72W 103A 53c] ASIC:[ 85c 795hz(BL: 795) 256 (E:193) F:0] LOOP[3] ON 9: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 71W 102A 64c] ASIC:[105c 775hz(BL: 775) 246 (E:193) F:0] 10: DC2DC/1/:[vlt1:699 vlt2:701(DCl:794 Tl:794 Ul:706) 78W 112A 75c] ASIC:[105c 855hz(BL: 855) 234 (E:193) F:0] 11: DC2DC/1/:[vlt1:695 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 98A 67c] ASIC:[ 85c 770hz(BL: 770) 221 (E:193) F:0] LOOP[4] ON 12: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 74W 106A 80c] ASIC:[105c 835hz(BL: 835) 220 (E:193) F:0] 13: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 69W 99A 74c] ASIC:[110c 785hz(BL: 785) 221 (E:193) F:0] 14: DC2DC/1/:[vlt1:697 vlt2:701(DCl:794 Tl:794 Ul:706) 72W 103A 60c] ASIC:[105c 815hz(BL: 815) 238 (E:193) F:0] LOOP[5] ON 15: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 68W 97A 53c] ASIC:[ 85c 765hz(BL: 765) 197 (E:193) F:0] 16: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 72W 102A 56c] ASIC:[ 85c 795hz(BL: 795) 207 (E:191) F:0] 17: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 101A 48c] ASIC:[ 85c 790hz(BL: 790) 209 (E:193) F:0] LOOP[6] ON 18: DC2DC/1/:[vlt1:701 vlt2:703(DCl:794 Tl:794 Ul:706) 73W 103A 58c] ASIC:[ 85c 805hz(BL: 805) 205 (E:193) F:0] 19: DC2DC/1/:[vlt1:697 vlt2:703(DCl:794 Tl:794 Ul:706) 73W 104A 69c] ASIC:[ 85c 815hz(BL: 815) 210 (E:193) F:0] 20: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 101A 65c] ASIC:[ 85c 795hz(BL: 795) 244 (E:193) F:0] LOOP[7] ON 21: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 76W 108A 78c] ASIC:[ 85c 835hz(BL: 835) 213 (E:193) F:0] 22: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 71W 102A 76c] ASIC:[ 85c 810hz(BL: 810) 239 (E:193) F:0] 23: DC2DC/1/:[vlt1:701 vlt2:703(DCl:794 Tl:794 Ul:706) 70W 100A 58c] ASIC:[ 85c 775hz(BL: 775) 204 (E:193) F:0] LOOP[8] ON 24: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 74W 105A 68c] ASIC:[105c 815hz(BL: 815) 226 (E:193) F:0] 25: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:794 Ul:706) 72W 103A 79c] ASIC:[100c 815hz(BL: 815) 251 (E:193) F:0] 26: DC2DC/1/:[vlt1:675 vlt2:682(DCl:682 Tl:794 Ul:706) 72W 106A 76c] ASIC:[100c 820hz(BL: 820) 250 (E:190) F:0] LOOP[9] ON 27: disabled (i2c good, no OC) 28: disabled (i2c good, no OC) 29: disabled (i2c good, no OC)
[H:HW:4122Gh,W:1918,L:0,A:27,MMtmp:0 TMP:(19)=>=>=>(66,48)] Pushed 27 jobs , in HW queue 4 jobs (sw:1, hw:1)! min:28 wins:6022[this/last min:106/265] bist-fail:461, hw-err:50 leading-zeroes:40 idle promils[s/m]:0/0, rate:4631gh/s asic-count:24 Fan:80, conseq:200 AC2DC BAD: 0 0 R/NR: 1588/0 RTF asics: 0 5 restarted 0 reset 0 reset2 3 fake_wins 0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble 0 purge_queue 0 read_timeouts 0 dc2dc_oc 2 read_tmout2 5 read_crptn 0 purge_queue3 31 bad_idle Adapter queues: rsp=3, req=19
Please upgrade to latest version (2.5.6 experimental), but most probably it wont help. It looks like it was damaged in shipping. Mark the whole loop as "removed" in "settings"->"asics". Regards` Hi Zvi. The update to 2.5.6 helped. I've seen that the PSU power is now limited at 1250 .. anything above it entered in the UI does not reflect in miner-gate config files after restart, when the unit restarts with 1250 no matter what you have in the UI. At least this is how it works here ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) 6h+ uptime now with no events. Before the upgrade, I had to restart the miner-gate and/or reboot the unit every 2h. Uptime:24371 | FPGA ver:62 -----BOARD-0----- PSU[EMERSON1200]: 1376->1248w[1248 1244 1248] (->1279w[1279 1279 1279]) (lim=1250) 0c cooling:0/0x0 -----BOARD-1----- PSU[EMERSON1200]: 1392->1248w[1244 1248 1248] (->1268w[1268 1268 1268]) (lim=1249) 0c cooling:0/0x0 LOOP[0] ON 0: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 61W 88A 54c] ASIC:[ 85c (120c) 710hz(BL: 710) 3012 (E:193) F:0] 1: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 63W 91A 55c] ASIC:[ 85c (120c) 715hz(BL: 715) 3044 (E:191) F:0] 2: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 67W 97A 49c] ASIC:[ 85c (120c) 770hz(BL: 770) 3271 (E:193) F:0] LOOP[1] ON 3: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 64W 93A 56c] ASIC:[ 85c (120c) 735hz(BL: 735) 3098 (E:192) F:0] 4: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 66W 96A 67c] ASIC:[ 85c (120c) 770hz(BL: 770) 3256 (E:193) F:0] 5: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 61W 88A 60c] ASIC:[ 85c (120c) 700hz(BL: 700) 2729 (E:193) F:0] LOOP[2] ON 6: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 65W 94A 69c] ASIC:[ 85c (120c) 755hz(BL: 755) 3178 (E:193) F:0] 7: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 71W 103A 73c] ASIC:[ 95c (120c) 800hz(BL: 800) 3484 (E:193) F:0] 8: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 68W 99A 56c] ASIC:[ 85c (120c) 770hz(BL: 770) 3264 (E:193) F:0] LOOP[3] ON 9: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 68W 98A 68c] ASIC:[105c (120c) 755hz(BL: 755) 3288 (E:193) F:0] 10: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 74W 108A 79c] ASIC:[110c (120c) 830hz(BL: 830) 3496 (E:193) F:0] 11: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 66W 96A 72c] ASIC:[ 85c (120c) 760hz(BL: 760) 3138 (E:193) F:0] LOOP[4] ON 12: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 73W 105A 86c] ASIC:[110c (120c) 840hz(BL: 840) 3362 (E:193) F:0] 13: DC2DC/1/:[vlt1:691 vlt2:693(DCl:794 Tl:794 Ul:714) 67W 96A 80c] ASIC:[115c (120c) 775hz(BL: 775) 3204 (E:193) F:0] 14: DC2DC/1/:[vlt1:691 vlt2:695(DCl:794 Tl:794 Ul:714) 71W 102A 66c] ASIC:[110c (120c) 815hz(BL: 815) 3432 (E:193) F:0] LOOP[5] ON 15: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 60W 87A 55c] ASIC:[ 85c (120c) 695hz(BL: 695) 2895 (E:193) F:0] 16: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 67W 97A 59c] ASIC:[ 85c (120c) 770hz(BL: 770) 3142 (E:191) F:0] 17: DC2DC/1/:[vlt1:689 vlt2:690(DCl:794 Tl:794 Ul:714) 62W 91A 48c] ASIC:[ 85c (120c) 725hz(BL: 725) 3052 (E:193) F:0] LOOP[6] ON 18: DC2DC/1/:[vlt1:689 vlt2:690(DCl:794 Tl:794 Ul:714) 66W 96A 59c] ASIC:[ 85c (120c) 765hz(BL: 765) 3264 (E:193) F:0] 19: DC2DC/1/:[vlt1:685 vlt2:690(DCl:794 Tl:794 Ul:714) 66W 96A 70c] ASIC:[ 85c (120c) 770hz(BL: 770) 3099 (E:193) F:0] 20: DC2DC/1/:[vlt1:687 vlt2:690(DCl:794 Tl:794 Ul:714) 65W 95A 66c] ASIC:[ 85c (120c) 760hz(BL: 760) 3207 (E:193) F:0] LOOP[7] ON 21: DC2DC/1/:[vlt1:685 vlt2:690(DCl:794 Tl:794 Ul:714) 69W 101A 78c] ASIC:[ 85c (120c) 790hz(BL: 790) 3374 (E:193) F:0] 22: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 66W 95A 77c] ASIC:[ 85c (120c) 770hz(BL: 770) 3102 (E:193) F:0] 23: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 64W 93A 60c] ASIC:[ 85c (120c) 730hz(BL: 730) 2972 (E:193) F:0] LOOP[8] ON 24: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 67W 97A 69c] ASIC:[105c (120c) 770hz(BL: 770) 3220 (E:193) F:0] 25: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 67W 97A 82c] ASIC:[100c (120c) 780hz(BL: 780) 3330 (E:193) F:0] 26: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 80W 115A 86c] ASIC:[110c (120c) 875hz(BL: 875) 3752 (E:193) F:0] LOOP[9] ON 27: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 68W 99A 85c] ASIC:[105c (120c) 770hz(BL: 770) 3204 (E:189) F:0] 28: DC2DC/1/:[vlt1:687 vlt2:693(DCl:794 Tl:794 Ul:714) 60W 86A 80c] ASIC:[105c (120c) 685hz(BL: 685) 2914 (E:193) F:0] 29: DC2DC/1/:[vlt1:689 vlt2:693(DCl:794 Tl:794 Ul:714) 68W 99A 71c] ASIC:[110c (120c) 780hz(BL: 780) 3351 (E:193) F:0]
[H:HW:4426Gh,W:2015,L:0,A:30,MMtmp:0 TMP:(23)=>=>=>(72,72)] Pushed 28 jobs , in HW queue 4 jobs (sw:1, hw:1)! min:48 wins:96134[this/last min:172/226] bist-fail:151, hw-err:513 leading-zeroes:40 idle promils[s/m]:0/0, rate:3949gh/s asic-count:30 Fan:80, conseq:200 AC2DC BAD: 0 0 R/NR: 23852/0 RTF asics: 0 0 restarted 0 reset 0 reset2 0 fake_wins 0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble 0 purge_queue 0 read_timeouts 0 dc2dc_i2c 1 read_tmout2 3 read_crptn 0 purge_queue3 0 bad_idle Adapter queues: rsp=3, req=19
Many thanks.
|
CSA/cUL Certified Power Distribution Panels - Basic, Switched, Metered. 1-3 phases. Up to 600V. NMC:N4F9qvHz11BHcc4nh1LCJFsrZhA1EWgVwj
|
|
|
|