robinlongstride
Newbie
Offline
Activity: 32
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 04:06:44 PM |
|
How do i set up my ASICs to do external profit switching? I think ive got the program configured right, not sure if i need the remote program too though? Awesome miner is so confusing :/
Hi, Please follow this guide that both describes how the concept works and how to configure. It's basically just a click in a checkbox to setup: http://www.awesomeminer.com/help/profitswitching.aspx#externalprofitBut how can it be just a click in a checkbox if it says in the documentation that it does not change the pools on the ASIC so you have to do this manually? So what settings are needed on the ASICs? and why does it say in documentation "The setting for Nicehash, zpool and Mining Pool Hub in Options dialog, Profit switching section, should not be filled in for the External Profit Switcher"... It underlines not to fill in some settings....so where do you fill in the information? what happens if you do fill in the info? will it not work lol, what information is it even talking about, this program and documentation is so confusing... The main concept for the External Profit Switcher is actually very simple, and is described in in the very first point: "For External Profit Switching, Awesome Miner will not add or change any pools on the miner. The profit switcher will only look at the pools already defined on the miner and change the priority of them. The priority is set based on profitability. "What the External Profit Switcher is doing is to look at all the pools on the Antminer, and you can see these in the Pools tab at the bottom of the screen in Awesome Miner, and set priority based on profitability. The pools you already defined on your Antminers (probably three of them) are already available, but you can of course add more. You can add them manually via Awesome Miner for example, where you define them via the "New pool" button in the toolbar. Then you can add it to your Antminer from the Pools tab at the bottom of the screen. All the pools you have on the Antminer will be considered by the profit switcher, but Awesome Miner will never do any add/remove pools operations automatically for you. The profit switcher is operating only by setting priorities that makes the Antminer change to the most profitable pool. The settings about "Nicehash, zpool, ..." and so on are for the Managed Profit Switcher used for GPU mining, where you have many more complex scenarios because of multiple mining software and algorithms. None of these settings relate to profit switching on an Antminer. It doesn't matter if you fill in these settings, they will be completely ignored by the External Profit Switcher for your Antminer. Ok thanks ive got it working for my L3+'s easily but when i try to add the default pools to my S9's no pools show up. I know zpool has sha256, am i doing something wrong or?
|
|
|
|
tf2addict
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 04:14:42 PM |
|
Any ETA for supporting XMR-Stak's new unified version? That's pretty much all I'm running these days. I so desperately want to use Awesome Miner and XMR-Stak that I'm considering writing an adapter program to emulate Claymore so I can feed XMR-Stak's data back to Awesome Miner. But I don't want to invest that time if support for XMR-Stak will be coming in the next month or two.
I have this written and running well. Please elaborate. I threw together a quick app last night to emulate a Claymore API to serve as a bridge between AM and XMR-Stak. Was quite easy actually and I think will work well enough for now. It's pretty cool to control XMR-Stak and see hash rates and profit show up in AM. I would like to also do the same for Cast XMR but I can't find any way to get hash rates out of it.
|
|
|
|
tf2addict
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 04:18:52 PM |
|
I found a workaround for AM not being able to launch XMR-Stak due to the elevated permissions requirements. Need to set local group policy Computer Configuration > Windows Settings > Security Settings > Local Policies > Security Options -> User Account Control: Run all administrators in Admin Approval Mode to Disabled. I don't like having to do that as it apparently weakens security but at least it works now. Hopefully the Stak devs can find a permanent code fix.
|
|
|
|
tailhead
Newbie
Offline
Activity: 12
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 04:36:42 PM |
|
Does it run with out using Awesome miner ? ....if not what is the popup error it gives with out Awesome miner you may need to install something like: vc_redist.x64.exe I have noticed in the past if something is not installed on your PC Awesome won't work with some soft ware miner an not tell you why or everything, you many need to run it directly to see if there is a error of some kind the miner may still shut down without awesome running, if it does then it's a setting you need to find out what that is ... i have also had some pools not work well with awesome miner running but that same pool will if i don't use awesome miner with the same settings i used with awesome miner ..
This problem only happen to my GTX1070 Rigs (Rig 1 and 2) and not for GTX1060 Rig (Rig3)below could be why the two PC don't have everything they need and the new one does ? .
Does it run with out using Awesome miner ? ....if not what is the popup error it may give with out Awesome miner you may need to install something like: vc_redist.x64.exe on those two pc.
or wait for the next update of Awesome to come out with Dstm Zcash Miner support that software miner does work better then EWBF software miner or seems to, the only reason i don't use it now is I like Using Awesome miner more .
I have a mix of 4 Nv cards with a 1070 ti coming some time next week. an i have two AMD rigs with 4 cards each i may add one more card each to sense the prices for Amd cards are dropping in the US again .
Hi, It runs smooth even with AM when run manually. It only happen when Profit switcher changes from a coin to another with Equihash (not everytime). Therefore I asked Patrike for his help. But anyway thanks for your suggestion !! I've identified a scenario where the Offline Detection didn't work for Managed Miners, and I think this was the scenario you were running into before. The next version will correct this. Hi, I updated to ver. 4.2.1 but still facing same problem (I tried to set rule to find offline again, but didn't help). 2017/11/28 1:14:20.925 [019] [S]Managed Profit Switching processing: Rig01 Local, IsRunning: False 2017/11/28 1:14:20.925 [019] [S] Profitability, poolChanged: False, Algorithm: Equihash -> Equihash, EngineType: ZecEwbfMiner ->ZecEwbfMiner, EngineSubType: Disabled ->Disabled, AutoDownload: True, EnginePath: 2017/11/28 1:14:20.925 [001] [S]CoinStore, Built in coin dictionary updated 2017/11/28 1:14:21.004 [001] [S]ServiceAdapter, trigger send settings 2017/11/28 1:14:21.035 [008] [S]Sending Miner Settings to Host: localhost 2017/11/28 1:14:21.035 [024] [S]Updating settings 2017/11/28 1:14:21.035 [024] [S]Current list of Managed Miners: [ManagedMiner#2 - Rig01 Local]
2017/11/28 1:14:21.035 [024] [S]Current list of Clocking Profile:
2017/11/28 1:14:21.035 [024] [S]Current list of Active Miners: [2] IsAttached: True, PID: 11240, InstanceId: 2
2017/11/28 1:14:21.035 [024] [S]Saving configuration to: C:\ProgramData\AwesomeMinerService\ServiceDataIntegrated.xml.tmp 2017/11/28 1:14:21.082 [024] [S]--> C:\ProgramData\AwesomeMinerService\ServiceDataIntegrated.xml 2017/11/28 1:14:37.959 [024] [E]Failed to process API request (time: 1016 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:14:44.101 [021] [E]Failed to process API request (time: 1031 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:14:50.180 [026] [E]Failed to process API request (time: 1031 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:14:56.384 [026] [E]Failed to process API request (time: 1141 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:15:02.494 [010] [E]Failed to process API request (time: 1031 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:15:08.558 [024] [E]Failed to process API request (time: 1016 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:15:14.781 [011] [E]Failed to process API request (time: 1089 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:15:21.021 [021] [E]Failed to process API request (time: 1012 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:15:27.276 [011] [E]Failed to process API request (time: 1152 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:15:33.488 [024] [E]Failed to process API request (time: 1179 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:15:39.547 [011] [E]Failed to process API request (time: 1005 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:15:45.616 [026] [E]Failed to process API request (time: 1004 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:15:51.678 [028] [E]Failed to process API request (time: 1003 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:15:57.739 [011] [E]Failed to process API request (time: 1008 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:16:03.871 [021] [E]Failed to process API request (time: 1097 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:16:10.072 [026] [E]Failed to process API request (time: 1131 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:16:16.166 [027] [E]Failed to process API request (time: 1010 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:16:22.213 [009] [E]Failed to process API request (time: 1003 ms): {"id":1, "method":"getstat"}
対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029 2017/11/28 1:16:25.582 [001] [S]Saving configuration to: C:\Users\tailhead\AppData\Roaming\AwesomeMiner\ConfigData.xml.tmp 2017/11/28 1:16:25.658 [001] [S]CoinStore, Built in coin dictionary updated 2017/11/28 1:16:25.738 [001] [S]ServiceAdapter, trigger send settings 2017/11/28 1:16:25.746 [001] [S]--> C:\Users\tailhead\AppData\Roaming\AwesomeMiner\ConfigData.xml 2017/11/28 1:16:25.822 [008] [S]Sending Miner Settings to Host: localhost 2017/11/28 1:16:25.822 [009] [S]Updating settings 2017/11/28 1:16:25.823 [009] [S]Current list of Managed Miners: [ManagedMiner#2 - Rig01 Local] For the moment I changed miner software from EWBF to DSTM and it looks fine. Just want to report.
|
|
|
|
soothaa
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 04:51:06 PM |
|
Any ETA for supporting XMR-Stak's new unified version? That's pretty much all I'm running these days. I so desperately want to use Awesome Miner and XMR-Stak that I'm considering writing an adapter program to emulate Claymore so I can feed XMR-Stak's data back to Awesome Miner. But I don't want to invest that time if support for XMR-Stak will be coming in the next month or two.
I have this written and running well. Please elaborate. I threw together a quick app last night to emulate a Claymore API to serve as a bridge between AM and XMR-Stak. Was quite easy actually and I think will work well enough for now. It's pretty cool to control XMR-Stak and see hash rates and profit show up in AM. I would like to also do the same for Cast XMR but I can't find any way to get hash rates out of it. Same, just what you did there except I used the CCminer API. CAST has no API to use, you're stuck using STAK for the time.
|
|
|
|
tf2addict
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 05:07:04 PM |
|
Any ETA for supporting XMR-Stak's new unified version? That's pretty much all I'm running these days. I so desperately want to use Awesome Miner and XMR-Stak that I'm considering writing an adapter program to emulate Claymore so I can feed XMR-Stak's data back to Awesome Miner. But I don't want to invest that time if support for XMR-Stak will be coming in the next month or two.
I have this written and running well. Please elaborate. I threw together a quick app last night to emulate a Claymore API to serve as a bridge between AM and XMR-Stak. Was quite easy actually and I think will work well enough for now. It's pretty cool to control XMR-Stak and see hash rates and profit show up in AM. I would like to also do the same for Cast XMR but I can't find any way to get hash rates out of it. Same, just what you did there except I used the CCminer API. Have you had any issues with Stak locking up during GPU initialization (usually on device 0)? This seems to happen if you restart Stak too quickly after it was running.
|
|
|
|
soothaa
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 05:09:29 PM |
|
Any ETA for supporting XMR-Stak's new unified version? That's pretty much all I'm running these days. I so desperately want to use Awesome Miner and XMR-Stak that I'm considering writing an adapter program to emulate Claymore so I can feed XMR-Stak's data back to Awesome Miner. But I don't want to invest that time if support for XMR-Stak will be coming in the next month or two.
I have this written and running well. Please elaborate. I threw together a quick app last night to emulate a Claymore API to serve as a bridge between AM and XMR-Stak. Was quite easy actually and I think will work well enough for now. It's pretty cool to control XMR-Stak and see hash rates and profit show up in AM. I would like to also do the same for Cast XMR but I can't find any way to get hash rates out of it. Same, just what you did there except I used the CCminer API. Have you had any issues with Stak locking up during GPU initialization (usually on device 0)? This seems to happen if you restart Stak too quickly after it was running. I believe it is more of a driver issue than anything - I just reboot and fire it back up.
|
|
|
|
dnyt
Newbie
Offline
Activity: 29
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 05:09:49 PM |
|
Hello, I am able to add an external miner and select Dstm Zcash Miner and it pulls all the stats unfortunately I am not able to set the Coin I am mining. Under coin it states Unspec. Equihash. When I right click and click on Define Pool Coin -> Zcash it does not change. Any idea? Thanks Daniel I've implemented support for the Dstm Zcash Miner.
You can expect a new release of Awesome Miner within the next 1 - 2 days with this support included.
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3430
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 05:56:55 PM |
|
Awesome Miner version 4.2.2
- XMR-Stak miner can be monitored as an External Miner - More flexible configuration of Block Explorers for the wallet balance feature to support more coins. Bitcoin Cash, Bitcoin Gold and Ethereum Classic are now supported by default. - Correction to profit threshold feature
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3430
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 06:13:20 PM |
|
Does Awesome Miner support remote controlling miners running nvOC (Ubuntu)?
My farm of nvOC based miners is growing and being able to centrally manage 1bash, 3main and the watchdog scripts (or perhaps in case of the watchdog script) be a replacement for it, would be very nice.
I'm running DSTM ZM Miner 0.5.6 on all rigs. I know that Awesome Miner recently added support for it, but it is not clear to me if Awesome Miner is only capable of interfacing with the ZM miner's API, or if it can manipulate GPU clock rates, power level, coins mined, etc, which are all normally selected within the 1bash script on each rig.
Awesome Miner can only connect to Linux miners using the API of the mining software, so the capabilities will be limited to what this API can provide and it's typically only the basic monitoring information that is available. The Remote Agent application is not available on Linux so you will not have any additional features like clocking or make changes to the pools and so on. The plan is however to have the Remote Agent application running on Linux in the future.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
raven1322
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 06:28:15 PM |
|
Just found out about this mining tool. Looks awesome, but have yet to download. Quick question, do multiple instances of a miner using different gpus but on the same rig count as multiple rigs, or just one rig?
|
|
|
|
tf2addict
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 06:37:18 PM Last edit: November 27, 2017, 07:29:31 PM by tf2addict |
|
Deleted
|
|
|
|
bit2255
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 125
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 06:42:04 PM |
|
Hi all, .. I have been using Awesome Miner for months now with my Antminer rigs (2-R4's, 2- S9's) without any issues. I just added five (5) new Avalon S-741s and while hashing very well, I cannot seem to add them to as a new miner to Awesome Miner. Searching through the forums... It looks like I need to figure out how to add "Privileged API Access" (I guess). I found some instructions but am not confident enough to attempt changing my settings for this. Can anyone help at the API for dummies level?
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3430
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 07:36:12 PM |
|
Just found out about this mining tool. Looks awesome, but have yet to download. Quick question, do multiple instances of a miner using different gpus but on the same rig count as multiple rigs, or just one rig?
The license is per mining instance, and in most cases you have one mining instance per computer. However, if you have both AMD and nVidia on the same computer, you typically run two separate mining instances, and that will consume 2 licenses.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3430
Merit: 1095
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 07:43:26 PM |
|
Hi all, .. I have been using Awesome Miner for months now with my Antminer rigs (2-R4's, 2- S9's) without any issues. I just added five (5) new Avalon S-741s and while hashing very well, I cannot seem to add them to as a new miner to Awesome Miner. Searching through the forums... It looks like I need to figure out how to add "Privileged API Access" (I guess). I found some instructions but am not confident enough to attempt changing my settings for this. Can anyone help at the API for dummies level? I don't have first hand experience of configuring Avalon miners, but I know other users are running them. On Avalon miners, the API settings can be found in the configuration interface via: Status -> CGMiner Configuration. When you found the settings for the API, you can get some inspirations on how to configure it from this guide: http://www.awesomeminer.com/help/minerapi.aspx
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
Dalba
Newbie
Offline
Activity: 92
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 09:20:45 PM |
|
Just found out about this mining tool. Looks awesome, but have yet to download. Quick question, do multiple instances of a miner using different gpus but on the same rig count as multiple rigs, or just one rig?
The license is per mining instance, and in most cases you have one mining instance per computer. However, if you have both AMD and nVidia on the same computer, you typically run two separate mining instances, and that will consume 2 licenses. Hello Patrike, I too have questions regarding licence. If you can't integrate in a future version the possibility to override the default profit switcher for specific profile groups, i'll have to install awesome miner on concerned rigs, losing the interest of managing all my rigs with one software. But what happened regarding licence ? Does the rig with his own awesome miner count has an additional licence ? Or is it considered as a free one working alone ?
|
|
|
|
jamesmbond
Newbie
Offline
Activity: 37
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 09:58:40 PM |
|
Is there a way to switch/change MANAGED TEMPLATES from within cloud service/dashboard? I have defined pools and unique coins/miner software by creating several managed templates in AwesomeMiner. I see where I can change POOLS from within cloud web page but nothing happens back at the miner -- i.e. I assume just changing pools is insufficient / not the same as changing to a managed template which is what I really need to do via the web/cloud service.
please advise if I'm doing something wrong or can we add this "change/apply managed template" feature to cloud service/page options?
|
|
|
|
Anamorphic
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2017, 10:58:26 PM |
|
Hi Patrike,
Zpool's Sha-256 algo is reporting incorrectly, both on their own website, and on AwesomeMiner. I spoke to the Zpool folks, and they said the below:
Me: "Hey guys, is the Sha-256 algo really paying out like the zpool website is listing it as? If so, my balance doesnt seem to be reflecting the massive pump on Zpool currently. Maybe broken API somewhere?" Zpool: "mBTC per PH" Me: "Did y'all make a change recently? Becuase it looks like it's reporting incorrectly on your website as well." Zpool: "well... it was a longtime ago, but just noticed I didn't change the actual stratum to PH, just the front end so, these are what it should have been a long time ago. Missed a few 000's"
Anyway, can you fix?
Thank you!
|
|
|
|
pfuenzalida
Newbie
Offline
Activity: 22
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 28, 2017, 12:28:56 AM |
|
Is there a way to switch/change MANAGED TEMPLATES from within cloud service/dashboard? I have defined pools and unique coins/miner software by creating several managed templates in AwesomeMiner. I see where I can change POOLS from within cloud web page but nothing happens back at the miner -- i.e. I assume just changing pools is insufficient / not the same as changing to a managed template which is what I really need to do via the web/cloud service.
please advise if I'm doing something wrong or can we add this "change/apply managed template" feature to cloud service/page options?
I all, I'm totally new on it... I would like to learn about Awesome Miner, to monitor my little ASIC farm... can anyone recommend me some reading/tutorial/video to start..? if it is in Spanish, better. tks
|
|
|
|
derkos
Newbie
Offline
Activity: 32
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 28, 2017, 02:11:33 AM |
|
Did AM ever get support for the eBit miners?
I actually don't know. Awesome Miner supports most miners that runs cgminer or compatible software with a monitoring API. If you have any of these miners, please give it a try with Awesome Miner and let me know. Here is the API Report for an eBit 9t miner. It uses CgMiner. It does not have a configuration option to enable anything API related. If this miner is running Cgminer (are you sure?), it has not been enabled for API calls. Do you have any configuration on this miner to enable it? Or any other settings related to Cgminer or maybe even an cgminer.conf file? Yes, it is running Cgminer. But unfortunately they have not given us root ssh password to be able to tweak the cgminer.conf. The only settings available in the GUI related to CGMiner are setting up the pools.
|
|
|
|
|