[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

Okay you have any idea how i can add starpool and granat for the estimates? Theyre everytime 0,00 but zpool and nicehash are showing that estimates. ( in the miners overview)

Take a look at this picture:
the estimates in € only working for zpool/nicehash, can i do anything? and for me its still not clear what the values in the profit switch table are meaning as example, NH und ZP are mostly 0.02 and starpool everytime 0.00

You have good advices for checktime and threeshold, too?

GranatGas should be supported since a few weeks ago. Star Pool is a multi-coin profit switching pool where Awesome Miner doesn't have support for getting their current profit.

You could set the threshold on a few percent, but otherwise I don't have any specific recommendations here.

[patrike]

Hi
I can not configure the computer restart rule.
all configured according to the instructions. The client installed the remote computer.
In the rule properties, the manual activation was enabled. When you click nothing happens ....

Can you send me the log file for the Remote Agent application and indicate the time your perform the operation? The log can be accessed from the Remote Agent icon in the lower right corner of the screen, where the right-click menu has the option Log File.

[patrike]

Hi Patrike
i create a pool group. Add to this group two pools. Both pools work on same coin. Why AM switch between this two pools from time to time? Setting of priority and quota not help.
I want mine only on one prefered pool and second pool is only for reserve.
My config: D3 ASIC, Profit switching enabled, treshold 5%

Simply not understand how to stop this switching...

Maybe you can add a oportunity to disable switching for concrete miner in next releases?

Regards

Have you enabled Profit switching for this External Miner? It's disabled by default for all External Miners and must be manually enabled per miner if you want to use it. Please right click on the miner and select Properties, then you can disable the profit switcher.

[patrike]

The Remote Agent application is not available on Linux so you will not have any additional features like clocking or make changes to the pools and so on. The plan is however to have the Remote Agent application running on Linux in the future.

Hi Patrike, do you have in your plan an OS Linux Based too? Would be wonderful, image on USB stick and start.
ciao
K

I do have plans to support Remote Agent on Linux, but the work has not been started yet. To begin with it will not be a "complete OS" where you simply boot from USB, as those solutions takes significant amount of time to develop.

[patrike]

Hi Patrike,

Could you please add Process information/command line arguments in the Summary of each rig ?

I will probably do that. I've actually been thinking of moving some of the information in the View Details dialog to make them more visible, including the Profit switching tab.

[patrike]

How do I make profit switching work with dual mining?

If it's more profitable to do dual mining, the profit switcher will automatically do that.

Please review the "Dual mining hashrate" and "Dual mining power" in the profit profile (Options dialog, profit profile section, edit AMD or nVidia), and make sure the numbers looks good. You can also review the calculations if you right click on a running Managed Profit Miner and select View Details, then go to Profit switching tab.

[patrike]

Hi, I updated to ver. 4.2.1 but still facing same problem (I tried to set rule to find offline again, but didn't help).
For the moment I changed miner software from EWBF to DSTM and it looks fine.
Just want to report.

Hi Patrike,
I tried to tweak rules and now it looks fine (find offline status properly).
Thanks for your effort !!

By the way, I still have 1 request and 1 suggestion.
[Request]
In Profit Switching Profile Properties window, due to window is too small I could not see all contents.

Can you make it little bigger, or put scroll bar?
[Suggestion]
When creating user defined coins, I want AM to look whattomine data by ticker (short name such as BTC, ETH, etc).
i.e. In case of Solaris (XLR), there are some data available in Whattomine but due to algo xevan not supported by AM, XLR is not listed in AM.
If I create user defined coin Solaris with ticker XLR, and AM seek coin XLR in whattomine for available data, it would be really helpful.
This can also nice for multi-algo coins like DGB if at least AM pick up proper price from whattomine.

I will look into that sizing. I do know that they are some issues related to the fonts being used for English applications when running the software on some of the Asian versions of Windows.

If you add the algorithm to Options dialog, Algorithm section, these coins should be found by Awesome Miner. Try to add "Xevan" and refresh the list in the Coins tab.

[IzzyMoreno]

Hi patrike,

So for now granat isnt working. You know how to fix it? It isnt showing up in the online services, too. And estimates are only 0,00€

Any plans to integrate starpool support?

[narousberg]

Hi Patrike
thanks for answer about switching off a profit switching for concrete external miner. Your software have so many settings))) Need time to know this all.

I found some bug in wallet balance viewing.
In core wallet for example i see 4.40584934 DASH
But AM balance viewer show me only 4.39584234 DASH
This Dash wallet has recived a lot of small transaction last time.
Looks like rounding issue in AM.
Other wallets displays wrong amount too if i get small transactions. Always small difference, but good software must be without those bugs)
Regards.

[narousberg]

And please support for more coins! What give us a AM when we cant mine new coins....

[tf2addict]

Don't know if you've seen this yet but Cast XMR now has an API!  

https://bitcointalk.org/index.php?topic=2256917.0;all

[tf2addict]

Having an issue with running a batch file before starting the mining software.  The batch file runs ok but when it ends AM stops the managed miner and attempts to restart it.  It never even tries to launch the miner software.

Here's the message from Diagnostics after the batch file runs:

Unexpected exit of mining software. Possible cause: Incorrect configuration
Diagnostics completed

This is the batch file:

C:\DevCon\devcon.exe disable "PCI\VEN_1002&DEV_687F"
timeout /t 3
C:\DevCon\devcon.exe enable "PCI\VEN_1002&DEV_687F"
timeout /t 2
C:\OverdriveNTool\OverdriveNTool.exe -p1Main -p2Main -p3Main -p4Main -p5Main

The miner launches ok if I don't use the batch file so I know the miner configuration is correct.

[tf2addict]

Having an issue with profit display for one rig.  I have two rigs, both set to "unspecified CryptoNight" because I'm using NiceHash.  One rig displays profit ok but the other does not.  Both rigs have valid hashrate but the difference is the one that works is using Claymore and the one that doesn't is using a user-defined miner but the strange thing is if I apply a different template that uses Electroneum it displays profit ok.  I don't understand what is going on.

(I'm getting a hashrate with my user-defined miner because of the adapter app I wrote to feed hashrates from XMR-Stak to AM)

[patrike]

Hi patrike,

So for now granat isnt working. You know how to fix it? It isnt showing up in the online services, too. And estimates are only 0,00€

Any plans to integrate starpool support?

GranatGas had issues with HTTPS connections a while ago. Is this still a problem? At the bottom of the Online Services tab you can select which services to show in the list. Is GranatGas enabled?

I will consider Starpool as well.

[patrike]

Hi Patrike
thanks for answer about switching off a profit switching for concrete external miner. Your software have so many settings))) Need time to know this all.

I found some bug in wallet balance viewing.
In core wallet for example i see 4.40584934 DASH
But AM balance viewer show me only 4.39584234 DASH
This Dash wallet has recived a lot of small transaction last time.
Looks like rounding issue in AM.
Other wallets displays wrong amount too if i get small transactions. Always small difference, but good software must be without those bugs)
Regards.

Awesome Miner is getting the data from the Block Explorers, and they might have a small delay in their updates as well. Can you please verify the same address on the Block Explorer to see if you get the same result:
https://chainz.cryptoid.info/dash/

[patrike]

And please support for more coins! What give us a AM when we cant mine new coins....

Awesome Miner automatically includes all coins in the man list from WhatToMine.com. In addition to that you can add additional WhatToMine coins via their JSON URL's if they are not part of their main listing.

[Bell-Crypton]

ok,thanks for adding support for sia dual mining! just a quick question how can i control sia intensity from AM could you include snap shot of how you entered it into pool configuration GUI,  thanks for the help.

[tf2addict]

Sorting doesn't seem to work on the GPU list.   I can click the column headers and the little arrow indicates the sort order but the list is clearly not being sorted by that column though it does reorder the list (not sure by what though).  Is sorting supposed to work?

[patrike]

Having an issue with running a batch file before starting the mining software.  The batch file runs ok but when it ends AM stops the managed miner and attempts to restart it.  It never even tries to launch the miner software.

Here's the message from Diagnostics after the batch file runs:

Unexpected exit of mining software. Possible cause: Incorrect configuration
Diagnostics completed

This is the batch file:

C:\DevCon\devcon.exe disable "PCI\VEN_1002&DEV_687F"
timeout /t 3
C:\DevCon\devcon.exe enable "PCI\VEN_1002&DEV_687F"
timeout /t 2
C:\OverdriveNTool\OverdriveNTool.exe -p1Main -p2Main -p3Main -p4Main -p5Main

The miner launches ok if I don't use the batch file so I know the miner configuration is correct.

Is this something you have entered in the Properties of a Managed Miner, Command line section, in the "Batch-file commands" field? Is it working better if you remove the timeouts?
Did you get any additional output from the diagnostics other than the last few lines saying that it failed?

[patrike]

Having an issue with profit display for one rig.  I have two rigs, both set to "unspecified CryptoNight" because I'm using NiceHash.  One rig displays profit ok but the other does not.  Both rigs have valid hashrate but the difference is the one that works is using Claymore and the one that doesn't is using a user-defined miner but the strange thing is if I apply a different template that uses Electroneum it displays profit ok.  I don't understand what is going on.

(I'm getting a hashrate with my user-defined miner because of the adapter app I wrote to feed hashrates from XMR-Stak to AM)

The latest version of Awesome Miner can get API data from XMR-Stak API. Please use that one instead, because I cannot give support on something that is outside the product itself.