All,
CryptoALTeX is disabling SHA deposit/withdraw until the block chain situation is stabilized.
Sorry for the inconvenience but we cannot risk spending coins from a fork.
Thanks,
Chiznitz
Good to see an exchange being smart. If you didn't already have my business, you would have just got it. I hope the silence of the devs means they are bustin' their balls to fix this coin. I hate to think I wasted two days on mining something that ain't gonna happen. Why ya gotta make me look bad with your fancy announcement ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) We've also disabled and its banner'ed at bittrex... ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Well, I haven't signed up with you yet, but you were on my list. Next up, I have to say. Good job gentlemen. Too many exchanges have their head on sidesways lately. Glad to see some pros at work.
|
|
|
All,
CryptoALTeX is disabling SHA deposit/withdraw until the block chain situation is stabilized.
Sorry for the inconvenience but we cannot risk spending coins from a fork.
Thanks,
Chiznitz
Good to see an exchange being smart. If you didn't already have my business, you would have just got it. I hope the silence of the devs means they are bustin' their balls to fix this coin. I hate to think I wasted two days on mining something that ain't gonna happen.
|
|
|
Well, this was an interesting ride. My first launch ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Hardcored totally failed for me. I was getting nothing but rejects. Dammit, I like you guys. Prolly gonna try again in a few minutes. It took a WHILE to connect to anybody else. You guys might try lightninghash if you got a big rig, they are running real smooth but got NO hashpower. Like 12 plus hours estimated to find a block. Can't play that with my little rig, so I wound up (for now) at Hashing.at, which after 15 minutes is showing the same or close too it as cgminer on my stats. So, you veterans, is it normal for most of the pools to be dead ten to fifteen minutes into a launch? Or just my usual luck?
|
|
|
Hardcore's up now! Nice wallet, too Bonuscoin. Not as cheesy as the screenshots looked BF9DgnoJpKfyN592uc2UuEW1wHtuuboKQW
|
|
|
LOL Shameless self promotion is the mark of a real man. My hat is off to you sir. I'll point my measly 45 GH your way. (was 90 ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) One board died.
|
|
|
I appear to be fully in sync, Wallet encrypted but unlocked, and well past 48 hours. I see no changes. To those of you actually staking, where or how are you finding that information? Is there a console command I need to issue aside from unlocking the wallet for minting? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
|
|
The problem with AMT devices based on our boards is that they use less than half of the heat sink cooling area with poor airflow provided by samll fans most probably overheating. Please be correct and state that it si technobit board in AMT case and with tiny heat sink and poor ventilation !!!
Hey Martin. I was unawre that there was any difference, Yeah, this us an AMT. I actually think it shorted due to them going psycho with thermal paste. Since you are looking.. 5 little devices to the left of power, above the screw hole with the molex conbector facing you. 4 and 5 from left sparked and died. No other apparent damage. What are the devices? Also, the other is no longer in the case, and to the previous poster, it was set to default. I really don't thunk you can use this for mtbf calcs. More of an accident than a valid metric. Martin makes good boards. AMT got crazy with thermal grewse, which I am pretty sure was the cause of this. NO the thermal paste is not an issue here. For thermal paste is POOH's law more is more ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) The problem is overheating and dead transistor ( you do not see it ) and dead capacitors on the dc-dc psu. Please @ least change the subject of the tread to AMT( technobit) hex16B .... Sure. Will do that in just a moment. When you first called me on it I was in the hospital waiting room (thus all the typos which I'm about to fix.) I'm back home now. Android phones are cool, but typing on them is a cast iron bitch. Just so anybody reading this knows: There was NO intent to dis Technobit here. I frankly thought either I or AMT caused this. I was and am just looking for a bit of help. Back at you, Martin Based on what you just said there, do you think it worth trying to fix the board?
|
|
|
That was SMD 0805 capacitor 10 uF/16V
Thanks.
|
|
|
The problem with AMT devices based on our boards is that they use less than half of the heat sink cooling area with poor airflow provided by samll fans most probably overheating. Please be correct and state that it si technobit board in AMT case and with tiny heat sink and poor ventilation !!!
Hey Martin. I was unaware that there was any difference, Yeah, this is an AMT. I actually think it shorted due to them going psycho with thermal paste. Since you are looking.. 5 little devices to the left of power, above the screw hole with the molex connector facing you. 4 and 5 from left sparked and died. No other apparent damage. What are the devices? Also, the other is no longer in the case, and to the previous poster, it was set to default. I really don't thunk you can use this for mtbf calcs. More of an accident than a valid metric. Martin makes good boards. AMT got crazy with thermal grease, which I am pretty sure was the cause of this. edited for android induced typos
|
|
|
things look bad. i've closed off my sha wallets until we hear what's going on. I suggest you all do the same.
resync stuck at 14630 blocks. I'm taking that advice.
|
|
|
This is SHA People! Connect using: stratum+tcp://stratum.eu.bns.hardcoreminers.com:3018 -u Weblogin.Worker -p Worker password Pre registration open! https://bns.hardcoreminers.comI'm already ready, already! ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) JemHadar on your pool. Had fun with SHACoin, till the connection went wonky. Like the pool, trying again. Good to hear! Yes the caching problem has been fixed as you've noticed, so rest assured (problem occured because it was on a brand new server which wasnt fully optimized yet.) ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I'm going to release a brand new theme and support forums + ticketing system in the next few days so stay tuned, you'll see it when the site changes ![Cool](https://bitcointalk.org/Smileys/default/cool.gif) Honestly think it was a connections issue. I am in Idaho . Raskul had no problems at the same time when I was getting constant rejects .
|
|
|
Looks like stake is occurring, but the total coins I had seems to have dropped anyone else having any issues?
Is there a new client?
still no stake in my mac wallet, but it is connected OK at block 15555. could do with the new wallets soonish. No stake here, either. Win 7. I woke up to it being about 10 blocks out of sync and refusing to sync. Restarted, restarted minting. Got nothin'.
|
|
|
How long do I have to keep my coins until they start minting? Is this information available anywhere?
48 hours. I'll know if I'm right in about five hours ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
|
|
My biggest issue is how dafuq does one solder something that freaking small? I can do pretty fine work, but not that fine. http://www.theledart.com/blog/archives/1301Second biggest issue is figuring out what the parts are and where to get 'em ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) digikey, farnell/element14.. amazon.. ebay, if you must. Might be worth it to check if there's a hacker/makerspace near you that may already do SMD/SMT electronics and have some of the needed components (they're usually pretty standard.. capacitors for decoupling, resistors as pullups/downs/passive current limiters) in stock that you can get.. and they may also have more appropriate equipment should you need it ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Thanks! I gotta bag it for tonight, but that looks like I got some serious learnin' to do. Now to get the part ID'd.. well, tomorrow. I'm off to bed. Thanks again for the help, gentlemen.
|
|
|
By bang I mean fireworks, because they hold so much energy in a relatively small amount of space. If a resistor died, something might overvolt if it somehow shorted but that's about it.
Sorry, thought you meant actual noise. Yeah, I am actually well versed in electronics... 20 years ago ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Back then a cap would have made some serious noise. I think you're right, and I'll u/l a picture as soon as my phone decides to sync with Drive. It heated up and threw some sparks, totally demolished one of the beasties in question and melted the other one. My biggest issue is how dafuq does one solder something that freaking small? I can do pretty fine work, but not that fine. Second biggest issue is figuring out what the parts are and where to get 'em ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
|
|
|
But so far, NOBODY has beat bitmain at delivering miners to customers in a timely fashion.
Bitfury? Nope. Bitfury ran a few batches and vanished, quit, whatever. They became difficult to find. Nothing against them, I'm using Technobit miners right now. But the only time that I am aware of that Bitmain was more than three days from payment to you having it was Chinese New Year.
|
|
|
???If there is no what to buy ah! I dig money where to sell it!
What?
|
|
|
If they went with a bang and are rectangle things that look like a resistor, then its a capacitor ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) More of a fzzzt ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) They could very well be. Little rectangles, whole bunches of 'em. I haven't done component level work in decades, they didn't make the shit that small when I was young ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) I'll snap a pic in a bit. Maybe that'll help.
|
|
|
DP has excellent customer service support so far... Quick to respond and made requests fast! Looking forward to putting in more hashing power here...
That's great to hear, thanks! x3 Edit: Currently working on adding more merge mineable coins. More updates on this will be provided soon. I could be way off base here, but I'm under the impression that Maza is merge mineable with Bitcoin. If true, I'd like to see that happen.
|
|
|
This is SHA People! Connect using: stratum+tcp://stratum.eu.bns.hardcoreminers.com:3018 -u Weblogin.Worker -p Worker password Pre registration open! https://bns.hardcoreminers.comI'm already ready, already! ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) JemHadar on your pool. Had fun with SHACoin, till the connection went wonky. Like the pool, trying again.
|
|
|
|