already updated before it became inaccessible.

just installing google remote now.

i sent you a skype request a few minutes ago

e2a - myminer does not seem to work at all now. i can see neither SPx



2nd edit - Much Thanks to Zvi, 15minutes and im at least stable now at 1.5TH/s


needed to up the max watts & fan speed (its quite warm here)

actually mine arrived with 100 limit and a comment to 'up to 120'.

i did try that before it became in-accessible.

it seems to be stuck in 'boot up' (fan/s on full and no yellow/green led)

Spondoolies is/are online...

after swapping PSUs & PCI-e cables i now have one dead PSU and cannot access the rig at all.


BUT, myminer.io now sees it...

1.299 on the GUI

0.00 - on the pool...

it seems to submit a share or two at cgminer restart and then stalls out.....


Watchdog caught problem: soft handle




05/11 04:46:38:---- RUNNING SLOWSTART -----
05/11 04:46:39:Started!
05/11 04:46:50:consecutive_jobs > 0
05/11 04:46:50:consecutive_jobs = 0
05/11 04:46:50:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 04:53:40:Signal
spond-manager start
05/11 04:53:51:---- RUNNING SLOWSTART -----
05/11 04:53:51:Started!
05/11 04:54:04:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 04:59:49:Signal
spond-manager start
05/11 05:00:00:---- RUNNING SLOWSTART -----
05/11 05:00:00:Started!
05/11 05:00:12:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:06:00:Signal
spond-manager start
05/11 05:06:12:---- RUNNING SLOWSTART -----
05/11 05:06:12:Started!
05/11 05:06:24:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:12:09:Signal
spond-manager start
05/11 05:12:20:---- RUNNING SLOWSTART -----
05/11 05:12:21:Started!
05/11 05:12:31:consecutive_jobs > 0
05/11 05:12:31:consecutive_jobs = 0
05/11 05:12:32:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:18:21:Signal
spond-manager start
05/11 05:18:32:---- RUNNING SLOWSTART -----
05/11 05:18:32:Started!
05/11 05:18:44:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:24:29:Signal
spond-manager start
05/11 05:24:41:---- RUNNING SLOWSTART -----
05/11 05:24:41:Started!
05/11 05:24:53:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:30:41:Signal
spond-manager start
05/11 05:30:52:---- RUNNING SLOWSTART -----
05/11 05:30:53:Started!
05/11 05:31:04:consecutive_jobs > 0
05/11 05:31:04:consecutive_jobs = 0
05/11 05:31:05:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:36:50:Signal
spond-manager start
05/11 05:37:01:---- RUNNING SLOWSTART -----
05/11 05:37:01:Started!
05/11 05:37:13:consecutive_jobs > 0
05/11 05:37:13:consecutive_jobs = 0
05/11 05:37:13:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:43:01:Signal
spond-manager start
05/11 05:43:13:---- RUNNING SLOWSTART -----
05/11 05:43:13:Started!
05/11 05:43:25:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:49:10:Signal
spond-manager start
05/11 05:49:21:---- RUNNING SLOWSTART -----
05/11 05:49:21:Started!
05/11 05:49:33:consecutive_jobs > 0
05/11 05:49:33:consecutive_jobs = 0
05/11 05:49:34:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 05:55:22:Signal
spond-manager start
05/11 05:55:33:---- RUNNING SLOWSTART -----
05/11 05:55:33:Started!
05/11 05:55:45:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 06:01:30:Signal
spond-manager start
05/11 06:01:41:---- RUNNING SLOWSTART -----
05/11 06:01:42:Started!
05/11 06:01:53:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 06:07:42:Signal
spond-manager start
05/11 06:07:53:---- RUNNING SLOWSTART -----
05/11 06:07:54:Started!
05/11 06:08:06:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 06:13:51:Signal
spond-manager start
05/11 06:14:02:---- RUNNING SLOWSTART -----
05/11 06:14:02:Started!
05/11 06:14:14:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 06:20:02:Signal
spond-manager start
05/11 06:20:14:---- RUNNING SLOWSTART -----
05/11 06:20:14:Started!
05/11 06:20:26:consecutive_jobs > 0
05/11 06:20:26:consecutive_jobs = 0
05/11 06:20:26:consecutive_jobs > 0
Watchdog caught problem: soft handle
spond-manager stop
Stopping MG
05/11 06:26:11:Signal
spond-manager start
05/11 06:26:22:---- RUNNING SLOWSTART -----
05/11 06:26:23:Started!

Good Luck All!!

After 5 months of lies and empty/broken promises, Bitmain has finally asked for my wallet address and has agreed to pay up the compensation owed.

Once this is paid i will bow out of Bitmain threads indefinitely.

Shut down my Notvember Jupiturd today.

September October Jupiturd will be off on the next diff rise...

CGMiner restarts every 5 minutes.

GH on the pool never gets above 249GH - usually sitting around 49GH

Is this 'punishment' or is everyone suffering equally?

E2A -

Asic stats

Uptime:18 | FPGA ver:100
-----BOARD-0----- PSU[UNKNOWN]: 0->168w[168 0 0] (->168w[168 0 0]) (lim=100) 0c cooling:0/0x0
-----BOARD-1----- PSU[UNKNOWN]: 0->180w[180 0 0] (->180w[180 0 0]) (lim=100) 0c cooling:0/0x0 
-----BOARD-2----- PSU[UNKNOWN]: 0->183w[183 0 0] (->183w[183 0 0]) (lim=100) 0c cooling:0/0x0
-----BOARD-3----- PSU[UNKNOWN]: 0->188w[188 0 0] (->188w[188 0 0]) (lim=100) 0c cooling:0/0x0

LOOP[0] ON 0: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:749) 66W 98A 43c] ASIC:[ 85c (125c) 815hz(BL: 815) 1 (E:192) F:0] 1: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:749) 62W 92A 47c] ASIC:[ 85c (125c) 780hz(BL: 780) 0 (E:193) F:0]

LOOP[1] ON 2: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:749) 72W 107A 50c] ASIC:[ 85c (125c) 880hz(BL: 880) 0 (E:193) F:0] 3: DC2DC/1/:[vlt1:673 vlt2:677(DCl:794 Tl:794 Ul:749) 66W 98A 51c] ASIC:[ 85c (125c) 820hz(BL: 820) 1 (E:193) F:0]

LOOP[2] ON 4: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:749) 73W 107A 44c] ASIC:[ 85c (125c) 870hz(BL: 870) 0 (E:193) F:0] 5: DC2DC/1/:[vlt1:669 vlt2:677(DCl:794 Tl:794 Ul:749) 68W 101A 48c] ASIC:[ 85c (125c) 835hz(BL: 835) 0 (E:193) F:0]

LOOP[3] ON 6: DC2DC/1/:[vlt1:675 vlt2:677(DCl:794 Tl:794 Ul:749) 76W 113A 50c] ASIC:[ 85c (125c) 915hz(BL: 915) 0 (E:193) F:0] 7: DC2DC/1/:[vlt1:673 vlt2:677(DCl:794 Tl:794 Ul:749) 68W 101A 51c] ASIC:[ 85c (125c) 835hz(BL: 835) 0 (E:192) F:0]

[H:HW:1302Gh,W:554,L:0,A:8,MMtmp:0 TMP:(33)=>=>=>(42,42)]
Pushed 28 jobs , in HW queue 4 jobs (sw:3, hw:3)!
min:14 wins:2[this/last min:2/0] bist-fail:24, hw-err:0
leading-zeroes:42 idle promils[s/m]:0/62, rate:0gh/s asic-count:8
Fan:80, conseq:179
AC2DC BAD: 0 0
R/NR: 7/0
RTF asics: 0
0 restarted 0 reset 0 reset2 0 fake_wins 0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble 0 purge_queue 0 read_timeouts 0 dc2dc_i2c 0 read_tmout2 0 read_crptn 0 purge_queue3 0 bad_idle
Adapter queues: rsp=2, req=21
FET:
0:9 1:9

when cryptsy was being slow to release UNO, i pulled out a total of 3800 UNO in 4 999 lumps.

that was the exact time that uRan was diminshed and uCun appeared.

since then my hard drive has faultered and 90% of everything i own is now in jeopardy.

'Day 4 of chkdsk /r /f C: has stalled... disk is grinding & clicking ;(

i have a few UNO left on cryptsy along with a few other alts...

what PSU are you using?

i sincerely doubt that is causing the lousy performance but would like to know anyway.

Asia.

Return to factory default settings didnt help much, except BTCG is now shown as 'alive'

Mining is still minimal & sporadic

SP20 arrived - 100USD in fees

Myminer.io doesnt see it - Found it with Adv. IP scanner

CGMiner stops running every minute or two

Changed DNS to 8.8.8.8 and 192.168.1.1 - reverts to "#Your static network configuration"

UI says 1293GH - BTCG says 94GH but then stops

Total shares in 90 minutes - 11

on rebooting UI changes IP despite switching off DHCP

updated to latest FW... no diff

UI also states BTCG pool is 'dead' while all other rigs are running on that pool...


E2A - using 2 x Cougar 750w PSUs linked with 'Add2PSU'

THIS is why we can't have nice things...

no back ups... i only pulled my coins off cryptsy last week...regretting it at the mo!

running chkdsk C: /f /r

206486 / 311792 files processed...


wish me luck!!

im going through something similar - 3 days of chkdsk and only 24% done...

cant access any files or wallets - dreading a re-install + lengthy backing up.

i actually wish id left everything on cryptsy now...

Fuck You Too!!

Searing is a blight on our landscape - how many times does one 'man' need to repeat himself when hes wittering shite?

'just sayin' - doesn't excuse one from being a cock


the irony being, i am turning into as much of a prick as the one/s i admonish...


which is why i have begged and pleaded for him to just STFU.....ffs


 WE. KNOW.!!

 YOU. ALREADY. TOLD. US!! SEVERAL FUCKING TIMES A DAY!!!


'jus' sayin'

Unlike OP who PM'd me to please post in here, my issues are yet to be resolved.

Bitmain has offered, i have accepted - bitmain has then changed the offer repeatedly over 5 months, making false claim after empty promise again & again, and i am STILL 4 PSUs out of pocket... and not cheap PSUs!!

He pretends to not understand significant concerns and that a bad deal is not an option for some people.

' why you not to trying our hosting?? '

' just send us more 1000s USD and we will give you your compensation '

i already told you more than once that only ignorant fools ignore people, even obviously ignorant fools can teach us things.

like i have learnt how annoying cunts like yourself influence many people with your constant assault upon our senses.

kind of like how gross fast food corporations make so much money simply by putting images of their shit in our faces.

it does not mean they offer anything of value, merely that shoving shit in peoples faces inevitably leads to sales.

in your cases it just leads to more frustration tho, as its so endless with not even a juicy looking burger to rush out & buy.


Searing - you really dont know how much you embarrass yourself - and that is so sad (just like your 'mate', Phonie x)


you both sound like you just found the internet and now you think everyone here is your new family and just has to hear your boring story 15 times a day....

it was bad enough when it was just in here, but now your in multiple threads saying the same shit over & over.


Kill Yourself

im not in the US

i have sent all relevant details to bitmain - as i stated we have exchnanged over 400 emails. most of them utter stupidity, usually repeatedly.

i am now at the point that only actual compensation as offered previously will suffice.

i have enough shit antminer junk in my home, i am able to read and as such will never accept another dangerous (3 month BS warranty) rig from bitmain.

four S2s = FOUR DEAD PSUs + 1 more PSU that was RMA'd and arrived dirty, dented and only able to power 9 blades.ffs!

multiple dead/failing boards have been RMA'd - some were ok, others not.

a Dead power board has been RMA'd - an equally shit & filthy one was sent

a dead control board has been RMA'd - it works but arrived absolutely FILTHY.

he's refused to replace the buckled fans & the dead LED screen and to be quite honest the last blade needing RMA'd has just sat gathering dust despite having been sent a shipping label. Its just more messing around to be sent yet another already RMA'd piece of shit.

so now ive repeated myself to you too, what do you suggest?

more order numbers?

more screen grabs?

Tell 'Tim'?

ZZzzzzzzz....

while i 100% agree with the sentiment, every single bitmain product has been an overpriced, failing/used piece of shit.

s1 was the best of the bunch - but without days of 'fixing' they were shit.

s2 was just overpriced shit, they revised it about 5 times, each time it was shit - when they finally got it right - they stopped selling them and continued mining them instead. i bought 4, all four were fucked up - all four took MONTHS of emails to get more shit sent...  2 of them are STILL fucked and run only 9 boards

sorry, but fuck bitmain!!