Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[fanisk21]

Antmine with new server.

https://i.imgur.com/2To4lAL.png
47TH

[1715623868]

1715623868

[1715623868]

1715623868

[miner582]

all these pools are trash the http://mine.nlpool.nl , been up and down all day , crashing my damn rigs with thier bull shit

umining are straight up thieves , somone like nanopool needs to start a legit pool

Probably rival pools are dns attacking nlpool. Best thing right now is solo mining until a good pool like nanopool adds xvg.

People instead of blaming it, then go only for ETH, nlpool is a new pool and its doing a good job, so if you dont have patience then dont even try to mine on a new pool. NLPOOL should open a new thread and leave this one for Claymore miner related.

[garybeng]

Something must have changed in the Ethermine epool. Stale shares has gone up to 25% since yesterday.
Was done to about 7% on v10.5 and v10.6. Now, its all at high 25% on v10.6 and v11.0.
Anyone experience the same here?

[fanisk21]

Alredy tested zpool.ca too. Although the 2% fee they paid me in 4 hours what "What to Mine" reported.

[karionstre]

Hi,

I'm trying to use the command "-r 180" to restart the miner every 3 hours but all I get is the miner restarting in loop as soon as I launch it. What am I doing wrong ?

Thx for the help !

[muzuca]

May be a stupid question, but I recall reading in the Claymore readme file that we should not overclock when dual mining. I have noticed when I overclock mining eth alone I’m good, however when dual I end up with one specific card having openCL. But I have also noticed many of you are over locking. Should I or shouldn’t I?

You should do that... I’m doing in my 3 rigs and everything is working nice with dual mining, you just need to find the best setup to do that.

[muzuca]

No, actually that is not true. There are people mining XSH ( Shield ) since the difficulty is more stable.

Best

Wijnand

About my question, why is showing xsh for people mining xvg?

Because it's the same Algo i think.

@mine_Phun
Same problem here- mining XVG only and it shows XSH and XVG

1. So will the XSH showing on the website be converted to XVG

2. Also i see a XSH wallet address with some balance - But this wallet does not belong to me- I only have a XVG wallet
what is this XSH wallet?

see https://ibb.co/cW6ji7

I noticed this situation too... probably I’m mining for someone else.

[Metroid]

if you by miracle connect to antminer and your system restarts then boom gameover hehe

user rpcpassword=pass rpcport=20102 port=21102 server=1 listen=1 daemon=1 algo=blake gen=1

-dpool  http://192.168.xxx.xxx:20102
 -dwal user
 -dpsw pass
 -dcoin blake2s
 -dcri 36

I'm trying to figure that out too, tonight i will see about it.

[grimjaw99]

windows defender spotted goddam trojans and malware in your Zip File!
winbit coin trojans!!!

[groovytechno]

all these pools are trash the http://mine.nlpool.nl , been up and down all day , crashing my damn rigs with thier bull shit

umining are straight up thieves , somone like nanopool needs to start a legit pool

Unfortunately Nanopool will not be making an XVG pool :/   I wrote them and they specifically said that they are not making one as they are focusing on new equihash based pool.  

It is very disappointing that we can't rely on reputable and trustworthy pools to mine XVG via the blake2s algo at this time.


Maybe if more of us write them, simply to request (nicely) that they come up with a pool for us to mine XVG, they will reconsider and make it a priority, considering that there are thousands of us out there dual mining XVG.


If I ran Nanopool, I would absolutely, without a doubt seriously consider making a solid blake2s (Verge) pool, based on the sole notion that a fair amount of us are mining ETH or ETC from them using Claymore's miner, and that most of us are dual mining.  



Seriously guys,  send out a quick message to nanopool's support and kindly request they give us a blake2s XVG pool.   Perhaps that will persuade them.

[Marvell2]

if you by miracle connect to antminer and your system restarts then boom gameover hehe

user rpcpassword=pass rpcport=20102 port=21102 server=1 listen=1 daemon=1 algo=blake gen=1

-dpool  http://192.168.xxx.xxx:20102
 -dwal user
 -dpsw pass
 -dcoin blake2s
 -dcri 36

I'm trying to figure that out too, tonight i will see about it.

ok Ill check back tomorrow, i’ll try a few more things myself with a test rig

[mine_phun]

To avoid most of questions:

NLpool restored from backup this night. This means that we placed a full backup back of 24 hours ago, and your earnings are not visible anymore on the website.

However, the old server is still running and will finish it's payments, so no money is lost.

The pool is running stable again..... Finally.

[groovytechno]

To avoid most of questions:

NLpool restored from backup this night. This means that we placed a full backup back of 24 hours ago, and your earnings are not visible anymore on the website.

However, the old server is still running and will finish it's payments, so no money is lost.

The pool is running stable again..... Finally.

Ok, thank you for the update.  I will resume and test out the updated pool

[fanisk21]

To avoid most of questions:

NLpool restored from backup this night. This means that we placed a full backup back of 24 hours ago, and your earnings are not visible anymore on the website.

However, the old server is still running and will finish it's payments, so no money is lost.

The pool is running stable again..... Finally.

Thank you guys for you hard hork

[fanisk21]

Just one question, why "Last 50 blocks for wallet isn't showing now?

[wsminer]

Just one question, why "Last 50 blocks for wallet isn't showing now?

We have to do some balance restore work tommorow... now first some sleep.

All will be ok

[fanisk21]

Just one question, why "Last 50 blocks for wallet isn't showing now?

We have to do some balance restore work tommorow... now first some sleep.

All will be ok

ok thanks

[browned]

@mine_Phun
Same problem here- mining XVG only and it shows XSH and XVG

1. So will the XSH showing on the website be converted to XVG

2. Also i see a XSH wallet address with some balance - But this wallet does not belong to me- I only have a XVG wallet
what is this XSH wallet?

see https://ibb.co/cW6ji7

Hmm that's my xsh address. Wonder if they can get it to the right place.

[greatauror28]

First time trying dual-mining ETH + XVG yesterday and used antminepool.

Whattomine stated i'd be able to mine 38 coins a day, but came home to only 30 coins with 28hrs run time and counting.

Something's definitely off if I'm losing 20% of my supposed to be earnings.  

[cryptoillusion1]

To avoid most of questions:

NLpool restored from backup this night. This means that we placed a full backup back of 24 hours ago, and your earnings are not visible anymore on the website.

However, the old server is still running and will finish it's payments, so no money is lost.

The pool is running stable again..... Finally.

I had only 8.87 XVG when you restored from backup- so I have zero showing on the website now - will this 8.87 be paid out as is ?
I ask since the website states min 10 XVG payout