Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[sir4o]

with 11.2 I rather got more stales +3-4% stale shares

I wouldn`t mind a few more stale shares...
but i have a difference in what claymore reports and what pool reports that is unacceptable.

Claymore reports 50 more shares than pool (1 hour timeframe).

193 (Claymore) > 148 (Pool)
165 (Claymore) > 143 (Pool)

Check my previous post:

https://bitcointalk.org/index.php?topic=1433925.msg31682140#msg31682140

No clue why what how.

The easiest thing to try is a different pool dude. Anything else, considering the poor information you've provided, will be a wild guess

[1714669272]

1714669272

[1714669272]

1714669272

[1714669272]

1714669272

[0xb1]

with 11.2 I rather got more stales +3-4% stale shares

I wouldn`t mind a few more stale shares...
but i have a difference in what claymore reports and what pool reports that is unacceptable.

Claymore reports 50 more shares than pool (1 hour timeframe).

193 (Claymore) > 148 (Pool)
165 (Claymore) > 143 (Pool)

Check my previous post:

https://bitcointalk.org/index.php?topic=1433925.msg31682140#msg31682140

No clue why what how.

The easiest thing to try is a different pool dude. Anything else, considering the poor information you've provided, will be a wild guess

hehe

Well, poor information. What else should i provide?
My cards have 0 mem errors, temp on average about 60°, no hardcore overclocking..

Trying a different pool is a good suggestion, altough i think ethermine is quite ok.

Thanks for the feedback!

[nazarpechka]

http://luckypool.xyz
verge blake2s.
thats all folks   

[Bigdrago]

11.2 must have some hardcoded OC settings. Suddenly I get GPU errors, more heat, more instability. On some GPU it works but some not.

I want to do my own OC settings! Remove OC and release 11.3

[xenonwon]

I have the same problem, 0 memory errors but I always have a 6/7% stale share on 11.2, ethermine pool :S

[0xb1]

I have the same problem, 0 memory errors but I always have a 6/7% stale share on 11.2, ethermine pool :S

Yep same here. Got 4-7% stale shares.

[Stoukie]

I have the same problem, 0 memory errors but I always have a 6/7% stale share on 11.2, ethermine pool :S

Yep same here. Got 4-7% stale shares.

I have stale shares about 5% to 10% on 11.0 also, moved to 11.2 still the same amount of stale shared on Ethermine.org... Move to Nanopool then they will not bother you... as they do not report on stale shares 

[Vispilio]

Is there anything decidedly better than DCR as the dual mining pair after these recent updates ?..

by the way version 11.2 causes some freezes on some of my rx580's with similar undervolting settings as earlier versions...

[wll1rah]

F**king windows defender forgot to add the exception for the new version, all the night without mining 

Make a mining folder and just add that to exceptions.  Then you don't need to worry about new versions.

[Bigdrago]

Do version 11.1 have hardcoded OC?

[tenmoi]

Is there anything decidedly better than DCR as the dual mining pair after these recent updates ?..

by the way version 11.2 causes some freezes on some of my rx580's with similar undervolting settings as earlier versions...

I run rx570. With the same settings as the previous versions and in eth only mode, 11.2 is faster by 1 mh. When I dual mined, the rig restarted after a short time. I took advice from a person here and lowered both mem and core clocks by 10% ( I use afterburner). My rig has been stable for short of 4 hours now with higher hash rates than 11.0 and less heat.
Hope this could help.

[wll1rah]

with 11.2 I rather got more stales +3-4% stale shares

I wouldn`t mind a few more stale shares...
but i have a difference in what claymore reports and what pool reports that is unacceptable.

Claymore reports 50 more shares than pool (1 hour timeframe).

193 (Claymore) > 148 (Pool)
165 (Claymore) > 143 (Pool)

Check my previous post:

https://bitcointalk.org/index.php?topic=1433925.msg31682140#msg31682140

No clue why what how.

The difference is most likely because it's listed as total shares, with accepted shares + (rejected + stale shares).  The problem is they appear on separate lines when you press s while the miner is running.

[user1988]

hi
what driver version do you recommend for claymore 11.2 in windows

[tg88]

hi
what driver version do you recommend for claymore 11.2 in windows

Amd blockchain Aug 23 2017;

[Bigdrago]

hi
what driver version do you recommend for claymore 11.2 in windows

I'm usimg newest amd 18.3.1

[user1988]

hi
what driver version do you recommend for claymore 11.2 in windows

Amd blockchain Aug 23 2017;

hi
what driver version do you recommend for claymore 11.2 in windows

I'm usimg newest amd 18.3.1

but all the commands work like for example
-cvddc
-mvddc

[Oppa Hans]

Caaan u tell me without reading whole 1000 pages whats the diference betwen 9.6 vs current version? :> Is OpenCL.dll missing error thing is caused by old version?

[Bigdrago]

hi
what driver version do you recommend for claymore 11.2 in windows

Amd blockchain Aug 23 2017;

hi
what driver version do you recommend for claymore 11.2 in windows

I'm usimg newest amd 18.3.1

but all the commands work like for example
-cvddc
-mvddc

No problemo

[GoBlack]

11.2 must have some hardcoded OC settings. Suddenly I get GPU errors, more heat, more instability. On some GPU it works but some not.

I want to do my own OC settings! Remove OC and release 11.3

I couldn't agree more! As it is, I'm planning on using 11.1 for a good long time. At least it's stable...

[GoBlack]

I have the same problem, 0 memory errors but I always have a 6/7% stale share on 11.2, ethermine pool :S

Yep same here. Got 4-7% stale shares.

I have stale shares about 5% to 10% on 11.0 also, moved to 11.2 still the same amount of stale shared on Ethermine.org... Move to Nanopool then they will not bother you... as they do not report on stale shares 

11.2 was a failure but 11.1 is stable (at least for me). As far as stale shares go, you can reduce them by checking for work faster than what is set by default. Add the switch -etht which by default is set to 200ms and reduce the time your rigs wait to check for shares. I have mine set to check every 20ms with this switch -etht 20

In my experience this keeps stale shares under 5% (Mine is currently at 2% using 11.1). But you can do some pings to make sure that your problem isn't latency between your router and the pool or even latency on your own network as well.